Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 1ca6437f 编写于 作者: A Arun Ramadoss 提交者： David S. Miller
浏览文件
操作

net: dsa: microchip: move broadcast rate limit to ksz_setup 

This patch move the 10% broadcast protection from the individual setup
to ksz_setup. In the ksz9477, broadcast protection is updated in reset
function.
Signed-off-by: NArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 d2822e68
隐藏空白更改
内联 并排
Showing with 30 addition and 32 deletion
drivers/net/dsa/microchip/ksz8795.c
浏览文件 @ 1ca6437f
......@@ -1415,12 +1415,6 @@ static int ksz8_setup(struct dsa_switch *ds)
if (!ksz_is_ksz88x3(dev))
ksz_cfg(dev, REG_SW_CTRL_19, SW_INS_TAG_ENABLE, true);
/* set broadcast storm protection 10% rate */
regmap_update_bits(dev->regmap[1], S_REPLACE_VID_CTRL,
BROADCAST_STORM_RATE,
(BROADCAST_STORM_VALUE *
BROADCAST_STORM_PROT_RATE) / 100);
for (i = 0; i < (dev->info->num_vlans / 4); i++)
ksz8_r_vlan_entries(dev, i);
......
drivers/net/dsa/microchip/ksz8795_reg.h
浏览文件 @ 1ca6437f
......@@ -64,13 +64,9 @@
#define SW_FLOW_CTRL BIT(5)
#define SW_10_MBIT BIT(4)
#define SW_REPLACE_VID BIT(3)
#define BROADCAST_STORM_RATE_HI 0x07
#define REG_SW_CTRL_5 0x07
#define BROADCAST_STORM_RATE_LO 0xFF
#define BROADCAST_STORM_RATE 0x07FF
#define REG_SW_CTRL_6 0x08
#define SW_MIB_COUNTER_FLUSH BIT(7)
......@@ -797,12 +793,6 @@
#define REG_IND_EEE_GLOB2_LO 0x34
#define REG_IND_EEE_GLOB2_HI 0x35
/* Driver set switch broadcast storm protection at 10% rate. */
#define BROADCAST_STORM_PROT_RATE 10
/* 148,800 frames * 67 ms / 100 */
#define BROADCAST_STORM_VALUE 9969
/**
* MIB_COUNTER_VALUE 00-00000000-3FFFFFFF
* MIB_TOTAL_BYTES 00-0000000F-FFFFFFFF
......
drivers/net/dsa/microchip/ksz9477.c
浏览文件 @ 1ca6437f
......@@ -197,12 +197,6 @@ static int ksz9477_reset_switch(struct ksz_device *dev)
ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
/* set broadcast storm protection 10% rate */
regmap_update_bits(dev->regmap[1], REG_SW_MAC_CTRL_2,
BROADCAST_STORM_RATE,
(BROADCAST_STORM_VALUE *
BROADCAST_STORM_PROT_RATE) / 100);
data8 = SW_ENABLE_REFCLKO;
if (dev->synclko_disable)
data8 = 0;
......
drivers/net/dsa/microchip/ksz9477_reg.h
浏览文件 @ 1ca6437f
......@@ -276,13 +276,9 @@
#define REG_SW_MAC_CTRL_2 0x0332
#define SW_REPLACE_VID BIT(3)
#define BROADCAST_STORM_RATE_HI 0x07
#define REG_SW_MAC_CTRL_3 0x0333
#define BROADCAST_STORM_RATE_LO 0xFF
#define BROADCAST_STORM_RATE 0x07FF
#define REG_SW_MAC_CTRL_4 0x0334
#define SW_PASS_PAUSE BIT(3)
......@@ -1652,12 +1648,6 @@
#define PTP_TRIG_UNIT_M (BIT(MAX_TRIG_UNIT) - 1)
#define PTP_TS_UNIT_M (BIT(MAX_TIMESTAMP_UNIT) - 1)
/* Driver set switch broadcast storm protection at 10% rate. */
#define BROADCAST_STORM_PROT_RATE 10
/* 148,800 frames * 67 ms / 100 */
#define BROADCAST_STORM_VALUE 9969
#define KSZ9477_MAX_FRAME_SIZE 9000
#endif /* KSZ9477_REGS_H */
drivers/net/dsa/microchip/ksz_common.c
浏览文件 @ 1ca6437f
......@@ -153,6 +153,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x02,
.broadcast_ctrl_reg = 0x06,
.supports_mii = {false, false, false, false, true},
.supports_rmii = {false, false, false, false, true},
.supports_rgmii = {false, false, false, false, true},
......@@ -186,6 +187,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x02,
.broadcast_ctrl_reg = 0x06,
.supports_mii = {false, false, false, false, true},
.supports_rmii = {false, false, false, false, true},
.supports_rgmii = {false, false, false, false, true},
......@@ -205,6 +207,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x02,
.broadcast_ctrl_reg = 0x06,
.supports_mii = {false, false, false, false, true},
.supports_rmii = {false, false, false, false, true},
.supports_rgmii = {false, false, false, false, true},
......@@ -223,6 +226,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x02,
.broadcast_ctrl_reg = 0x06,
.supports_mii = {false, false, true},
.supports_rmii = {false, false, true},
.internal_phy = {true, true, false},
......@@ -241,6 +245,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
.broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false,
false, true, false},
.supports_rmii = {false, false, false, false,
......@@ -264,6 +269,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
.broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false,
false, true, true},
.supports_rmii = {false, false, false, false,
......@@ -286,6 +292,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
.broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, true},
.supports_rmii = {false, false, true},
.supports_rgmii = {false, false, true},
......@@ -305,6 +312,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
.broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false,
false, true, true},
.supports_rmii = {false, false, false, false,
......@@ -327,6 +335,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
.broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false, true},
.supports_rmii = {false, false, false, false, true},
.supports_rgmii = {false, false, false, false, true},
......@@ -345,6 +354,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
.broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false, true, true},
.supports_rmii = {false, false, false, false, true, true},
.supports_rgmii = {false, false, false, false, true, true},
......@@ -363,6 +373,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
.broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false,
true, true, false, false},
.supports_rmii = {false, false, false, false,
......@@ -385,6 +396,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
.broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false,
true, true, false, false},
.supports_rmii = {false, false, false, false,
......@@ -407,6 +419,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.stp_ctrl_reg = 0x0B04,
.broadcast_ctrl_reg = 0x0332,
.supports_mii = {false, false, false, false,
true, true, false, false},
.supports_rmii = {false, false, false, false,
......@@ -623,6 +636,12 @@ int ksz_setup(struct dsa_switch *ds)
return ret;
}
/* set broadcast storm protection 10% rate */
regmap_update_bits(dev->regmap[1], dev->info->broadcast_ctrl_reg,
BROADCAST_STORM_RATE,
(BROADCAST_STORM_VALUE *
BROADCAST_STORM_PROT_RATE) / 100);
dev->dev_ops->config_cpu_port(ds);
dev->dev_ops->enable_stp_addr(dev);
......
drivers/net/dsa/microchip/ksz_common.h
浏览文件 @ 1ca6437f
......@@ -47,6 +47,7 @@ struct ksz_chip_data {
int mib_cnt;
u8 reg_mib_cnt;
int stp_ctrl_reg;
int broadcast_ctrl_reg;
bool supports_mii[KSZ_MAX_NUM_PORTS];
bool supports_rmii[KSZ_MAX_NUM_PORTS];
bool supports_rgmii[KSZ_MAX_NUM_PORTS];
......@@ -415,6 +416,16 @@ static inline void ksz_regmap_unlock(void *__mtx)
#define SW_REV_ID_M GENMASK(7, 4)
/* Driver set switch broadcast storm protection at 10% rate. */
#define BROADCAST_STORM_PROT_RATE 10
/* 148,800 frames * 67 ms / 100 */
#define BROADCAST_STORM_VALUE 9969
#define BROADCAST_STORM_RATE_HI 0x07
#define BROADCAST_STORM_RATE_LO 0xFF
#define BROADCAST_STORM_RATE 0x07FF
/* Regmap tables generation */
#define KSZ_SPI_OP_RD 3
#define KSZ_SPI_OP_WR 2
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或