[Why]
"Copy GSL groups when committing a new context" patch was accidentally
removed during a refactor

Patch: 21ffcc94 ("drm/amd/display: Copy GSL groups when committing a new context")

[How]
Re add it

Fixes: b6e881c9 ("drm/amd/display: update navi to use new surface programming behaviour")
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DTM topology updates happens by default now. This results in DTM
warnings when hdcp is not even being enabled. This spams the dmesg
and doesn't effect normal display functionality so it is better to log it
using DRM_DEBUG_KMS()

[How]
Change the DRM_WARN() to DRM_DEBUG_KMS()
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The convertion to "struct dm_pp_clock_range_for_mcif_wm_set_soc15"
is totally unnecessary and can be dropped.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Tested-by: NChangfeng Zhu <Changfeng.Zhu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Raven never goes to swsmu path. So "adev->smu.ppt_funcs" will be
always false.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Tested-by: NChangfeng Zhu <Changfeng.Zhu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Don't check drm_crtc_state::active for this either, per its
documentation in include/drm/drm_crtc.h:

 * Hence drivers must not consult @active in their various
 * &drm_mode_config_funcs.atomic_check callback to reject an atomic
 * commit.

atomic_remove_fb disables the CRTC as needed for disabling the primary
plane.

This prevents at least the following problems if the primary plane gets
disabled (e.g. due to destroying the FB assigned to the primary plane,
as happens e.g. with mutter in Wayland mode):

* The legacy cursor ioctl returned EINVAL for a non-0 cursor FB ID
  (which enables the cursor plane).
* If the cursor plane was enabled, changing the legacy DPMS property
  value from off to on returned EINVAL.

v2:
* Minor changes to code comment and commit log, per review feedback.

GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1108
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1165
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1344Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NMichel Dänzer <mdaenzer@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add trigger_hotplug debugfs entry.

Fixes: 6f77b2ac ("drm/amd/display: Add connector HPD trigger debugfs entry")
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If parse_write_buffer_into_params() fails, we should free
wr_buf before return.

Fixes: 6f77b2ac ("drm/amd/display: Add connector HPD trigger debugfs entry")
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In fnction is_cr_done & is_ch_eq_done, when done = false
happened once, no need to circle left ln_count.
This change is to make the code run a bit fast.
Signed-off-by: NBernard Zhao <bernard@vivo.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix spellos of "function" in drivers/gpu/drm/amd/display/.
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove duplicate header which is included twice.
Signed-off-by: NChen Zhou <chenzhou10@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Seamless boot skip porgram clock when set path mode.
It cause driverprogram clock after unblank stream.

[How]
update clock when non-seamless boot stream exist
Signed-off-by: NLewis Huang <Lewis.Huang@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Some SOC BB paramters may vary per SKU, and it does
not make sense for driver to hardcode these values

[how]
Parse the values from VBIOS if available, and use
them if valid
Signed-off-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
psr doesn't get fully disabled before hitting hubbub1_wm_change_req_wa.

[How]
Pass TRUE to "wait" parameter to get psr fully disabled.

Follow-Up fix to:
dc: PSR eDP p-state warning occurs intermittently after unplug DP
Signed-off-by: NFangzhi Zuo <Jerry.Zuo@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Recent characterization shows increased stutter latencies on some SKUs,
leading to underflow.

[how]
Update SOC params to account for this worst case latency.
Signed-off-by: NJun Lei <jun.lei@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
gcc version 5.4.0 fails compilation with:
‘PixelPTEReqHeightPTEs’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]

[How]
Initialized variable explicitly with 0
Signed-off-by: NRoman Li <roman.li@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The ctx field of dc_transfer_func is not always populated and therefore
isn't reliable.

[How]
Remove dc context from dc_transfer_func
Signed-off-by: NJosip Pavic <Josip.Pavic@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
We want to trigger atomic check on connector, which DSC debugfs
properties have changed.

[how]
Add a helper function that iterates through all active connectors
and add them to the state if DSC debugfs parameters have changed.
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
When comparing current DSC timing settings with enforced through
debugfs we have to calculate number of both vertical and horisontal
slices. So instead of doing that every time we should just
use number of slices rather than setting its dimensions.

[how]
In connector's dsc preferred settings structure change slice height
and slice width parameters to number of slices vertical and horisontal.
Also calculate number of slices in debugfs rather in create_stream_for_sink.
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why & how]
Previously we were returning the number of bytes allocated
for a write buffer from debugfs and when manually used it wouldn't
rise any errors, but it wouldn't match the size of the parameters
passed from userspace.

In successful case return the size passed by usermode otherwise
the error code is returned. That simplifies the parser helper
and removes a potential error of returning mismatched input size.
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[How]
 - use dc interface instead of hwss interface in cursor functions, to keep
dc->idle_optimizations_allowed updated
 - add dc interface to check if idle optimizations might apply to a plane
Signed-off-by: NJoshua Aberback <joshua.aberback@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Send stream active state info to DMUB

[How]
Implement GPINT to notify stream mask
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

| [Header Changes]
|       - Add debug flag to log line numbers for PSR debug
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

why:
some functions may need be dependent on stutter period in the future

how:
Extract from stutter calculations and place into perf_params structure
Signed-off-by: NMartin Leung <martin.leung@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
We need a virtual tool that would emulate a physical
connector unplug to usermode, while connector is
still physically plugged in.

[how]
Added a new option to debugfs entry "trigger_hotplug".
It emulates hotplug irq handling scenario by clearing
DC and DM connector states.
It can be triggered with the following command:

	echo 0 > /sys/kernel/debug/dri/0/DP-X/trigger_hotplug
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
For debug purposes we want not to enable DSC on certain connectors
even if algorithm deesires to do so, instead it should enable DSC
on other capable connectors or fail the atomic check.

[how]
Adding the third option to connector's debugfs entry dsc_clock_en.

Accepted inputs:
     0x0 - connector is using default DSC enablement policy
     0x1 - force enable DSC on the connector, if it supports DSC
     0x2 - force disable DSC on the connector, if DSC is supported

Ex. # echo 0x2 > /sys/kernel/debug/dri/0/DP-1/dsc_clock_en
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows us to reuse these on different asics.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCValidator is created/destroyed repeatedly for cofunctional validation
which causes a lot of memory thrashing, particularly when Driver Verifer
is enabled.

[How]
Implement a basic caching algorithm that will cache DCValidator with a
matching topology.  When a match is found, the DCValidator can be
reused.  If there is no match, a new one will be created and inserted
into the cache if there is space or an unreference entry can be evicted.
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Idle optimization and PSR conflict each other. If both enabled
at the same time, display flickering will be observed.

[How]
Disable idle optimization when PSR is enabled.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Previously we were only calling add_topology when hdcp was being enabled.
Now we call add_topology by default so the ERROR messages are printed if
the firmware is not loaded.

This error message is not relevant for normal display functionality so
no need to print a ERROR message.

[How]
Change DRM_ERROR to DRM_INFO
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
There are situations where we go from 2 pipe to 1 pipe in MPO, but this
isn't a pipe split being lost -- it's a plane disappearing in (i.e. video overlay
goes away) so we lose one pipe. In these situations we don't want to
disable the pipe in a separate operation from the rest of the pipe
programming sequence. We only want to disable a pipe in a
separate operation when we're actually disabling pipe split.

[How]
Make sure the pipe being lost has the same stream AND plane
as the old top pipe to ensure.
Signed-off-by: NAlvin Lee <alvin.lee2@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
PSR needs to be enabled on DCN30. This is the driver part of PSR
enablement.

Also disabled retired DMCU on driver side, since DMCU is
not supported on DCN30 anymore.

[How]
Add necessary changes to enable PSR on DCN30.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
ABM feature initialization was not executed due to early return.

dm_late_init() had an early return in case if DMCU is not used.
With the implementation of ABM on DMUB, DMCU can be disabled
but ABM still needs to be initialized.

[How]
Remove verification for DMCU from the top of the function.
The existing logic will handle the case when DMCU is not used.
Signed-off-by: NRoman Li <roman.li@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The function set_mst_bandwidth is poorly name since it isn't clear what
it does, and it also does not reflect any part of the allocation sequence
described in the DP spec.

[How]
Rename the function set_mst_bandwidth to set_throttled_vcp_size.
Signed-off-by: NGeorge Shen <george.shen@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
When pipe locks are being taken we wait for flip pending to clear first.
In some cases the pipe mapping is changed and the pending we're checking
for will never clear.

[How]
Don't check disabled pipes for flip pending.
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[HOW & WHY]
Change max EDID size constant to 1280 to support
10-block EDIDs.
Signed-off-by: NAidan Gratton <Aidan.Gratton@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
When link training failures occur for eDP, dp_disable_link_phy
is called which powers OFF eDP panel. After link training retry
delay, the next retry begins by calling dp_enable_link_phy
which does not issue a correspnding eDP panel power ON, leaving
panel powered OFF which leads to display OFF/dark.

[how]
Power ON eDP before next link training retry.
Signed-off-by: NAshley Thomas <Ashley.Thomas2@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Currently clearing the wrong bit for CP_IRQ, and logic on when to
clear needs to be fixed.

[How]
Corrected bit to clear and improved logic for decision to clear.
Signed-off-by: NHarmanprit Tatla <harmanprit.tatla@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Only the first pipe in ODM combine group should have nonzero recout
offset. All other pipes should have recout offset 0;
otherwise there will be gaps in the image.

[HOW]
Set recout.x to 0 if the pipe is not the leftmost ODM pipe.

When computing viewports, calculate the horizontal offset of a pipe's src
based on the current pipe's position in the ODM group, plus whatever offset the
leftmost ODM pipe has; otherwise there will be discontinuity in the image.

Since ODM combine can only combine pipes horizontally, nothing needs to
be done for recout.y.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>