The logic has moved to cgs.  mclk switching with DC at higher refresh
rates should work.
Reviewed-by: NEric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>

If there are no displays attached, there is no reason to disable
mclk switching.

Fixes mclks getting set to high when there are no displays attached.
Reviewed-by: NEric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

If there are no displays attached, there is no reason to disable
mclk switching.

Fixes mclks getting set to high when there are no displays attached.
Reviewed-by: NEric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Rather than open coding it.
Reviewed-by: NEric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

All thoses headers are not used by any source files.
Lets just remove them.
Signed-off-by: NCorentin Labbe <clabbe@baylibre.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As auto power profile mode still not support on vega10, so
just restore default profile mode in auto dpm level.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

User can change power limit between
[0, 1] * max power limit.

Set power limit to 0, restore to max power limit.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The double parentheses are not needed. Removing them fixes the following
warning when building with clang:

drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c:419:29:
  error: equality comparison with extraneous parentheses
    [-Werror,-Wparentheses-equality]
  if ((data->vdd_gfx_control == SMU7_VOLTAGE_CONTROL_BY_SVID2)) {
Reviewed-by: NGuenter Roeck <groeck@chromium.org>
Signed-off-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In several locations the driver uses AMD_CG_STATE_UNGATE (type enum
amd_clockgating_state) instead of AMD_PG_STATE_UNGATE (type enum
amd_powergating_stat) and vice versa. Both constants have the same
value, so this doesn't cause any problems, but we still want to pass
the correct type.

Fixing the mismatch resolves multiple warnings like this when building
with clang:

drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/cz_clockpowergating.c:169:7:
  error: implicit conversion from enumeration type 'enum
  amd_powergating_state' to different enumeration type 'enum
  amd_clockgating_state' [-Werror,-Wenum-conversion]
    AMD_PG_STATE_UNGATE);
Reviewed-by: NGuenter Roeck <groeck@chromium.org>
Signed-off-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

new generic interface is added in powerplay.
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

mmhub PG is enabled by SMU FW only for Raven.
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We deleted some code in e154162e ("drm/amd/powerplay: refine pp code
for raven") but there were a few related bits that were missed.  Let's
delete them as well.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since 12 of the 16 bytes are not initialized with anything let's ensure they're
sensibly zeroed out otherwise debugfs callers will read back garbage
(because they assume debugfs wrote sensible data back...)
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when echo "01">pp_dpm_pcie
the pcie dpm will fix in highest link speed.
But user should expect auto speed between
level 0 and level1
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only user enter manual performance mode, driver allow user
configure the sclk/mclk dpm parameters through sysfs
pp_power_profile_mode.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only when user set manual performance mode, driver
enable pp_dpm_force_clock_level.
so check the mode in pp_dpm_force_clock_level,
and delete the same logic in callback functions.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The trailing semicolon is an empty statement that does no operation.
Removing the two instances of them since they don't do anything.
Signed-off-by: NLuis de Bethencourt <luisbg@kernel.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is also supported with the read_sensor API and there
were no more users of the get_temperature API.
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

in populate_single_graphic_level for smu7
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move configurable profiling parameters to struct
profile_mode_setting and initialize current_profile_setting.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As not support per DPM level optimization,
so delete activity_target array.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

And not support perDPM level optimization on Polaris, so
delete sclk activity_target array.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when Overdrive voltage, need to disable AVFS.
when OverDriv engine clock, need to recalculate
AVFS voltage by disable/enable avfs feature.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Delete old OD type code path when populate clk.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: - check clk against OverDrive limits from VBIOS
    - set OD flag when user commit the setting.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not supported on APUs or Iceland.
and still not enabled on CI.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check vbios to determine whether we can enable OD
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when cat pp_od_clk_voltage it show
OD_SCLK:
0:        300Mhz        800 mV
1:        466Mhz        818 mV
2:        751Mhz        824 mV
3:       1019Mhz        987 mV
4:       1074Mhz       1037 mV
5:       1126Mhz       1087 mV
6:       1169Mhz       1137 mV
7:       1206Mhz       1150 mV
OD_MCLK:
0:        300Mhz        800 mV
1:       1650Mhz       1000 mV

echo "s/m level clock voltage" to change
sclk/mclk's  clock and voltage

echo "r" to restore default value.
echo "c" to commit the user setting.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add odn_edit_dpm_table function
points for setting user assigned clock/voltage.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

COMPUTER -> COMPUTE
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add initial infrastructure for manual dpm control.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when this bit was set on module load,
driver will allow the user over/under gpu
clock and voltage through sysfs.

by default, this bit was not set.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

abbreviate variable name number_of_performance_levels
to num_of_pl in struct phm_odn_clock_levels
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The additional output are: PSTATE_SCLK and PSTATE_MCLK value
in MHz as:

300 MHz (PSTATE_SCLK)
300 MHz (PSTATE_MCLK)
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

User can use to calculate profiling ratios when
set UMD Pstate.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: delete uncessary blank line.
    Add static const modifiers to an array
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>