The wireless core has removed the ssid variables, so also remove
them from the agnx driver so that it builds properly.

Cc: Li YanBo <dreamfly281@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This driver is for the Airgo AGNX00 wireless chip.

From: Li YanBo <dreamfly281@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This should make the driver use request_firmware() instead of a static
firmware.
Some obvious things are missing:
1) The unneeded header files are not removed yet. This is to keep the
   patch size small.
2) The .bin files are missing so the driver doesn't have what to load.
3) Testing. None of this was tested. It does compiles OK though :)
Signed-off-by: NLior Dotan <liodot@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix sizeof to use the right type
Signed-off-by: NLior Dotan <liodot@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch uses kzalloc() where really applicable.
Signed-off-by: NLior Dotan <liodot@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

No argument named @regs in stub_complete(), remove it.
Signed-off-by: NQinghuang Feng <qhfeng.kernel@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The 'pPacket' variable is assigned, but never used. Remove it.
Signed-off-by: NJohann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix build failure in et131x driver - missing \ in multiline macro

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch cleans up the et131x_debug.h defines as well as fix the
checkpatch warnings
Signed-off-by: NStoyan Gaydarov <stoyboyker@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now that the v4l2 tree is merged with mainline, enable some of
the compiled out functions.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

small cleanup of go7007:

- prepare for urb->status conversion
- micro optimization
- use kzalloc
- fix free of memory in use in go7007_usb_disconnect
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Cc: Cohen <rcohen@snurgle.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Comment out some functions that we aren't using yet, in anticipation
of using them when the v4l core merges are changed upstream.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

They are treated as __le16 everywhere, annotate as such.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

go7007: Convert driver to use video_ioctl2

go7007 driver were using the old method of having a big switch for handling
ioctls. Use instead the new video_ioctl2 method.

This patch also adds support for the 2.6.19 new ioctls to enumberate video
formats and intervals.

Still lacking the implementation of compression ioctls needed on go7007.

This patch weren't tested, due to the lack of a hardware with me.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is the driver for the Sensoray 2250/2251 USB devices added to
go7007 driver.
Signed-off-by: NPete Eberlein <pete@sensoray.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- Added documentation including README files from the original go7007
  driver package.
- Added Video4Linux2 MPEG controls.
- Added Video4Linux2 audio ioctls, which pass thru to the i2c driver.
- Improved saa7134 interface, to pass thru controls and video settings.
- Fixed a bug in sony tuner, as reported by Bifferos on the Go7007 wiki.
Signed-off-by: NPete Eberlein <pete@sensoray.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Lindent drivers/staging/echo

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove typedefs in drivers/staging/echo

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Update readme in drivers/staging/sxg

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove ugly 'Stop Comilation;' statement in sxghif, replace with an
error macro.

This should never be hit as we are only building for x86 boxes at the
moment.

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove typedefs in the sxg driver

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Lock only the portion of code that does register access.
Signed-off-by: NVijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Always set the user space offset from kernel space, to indicate group
transmitted/received.
Signed-off-by: NVijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added Rx control register definition. Flush Rx FIFO on init, and set
continuous DMA mode.
Signed-off-by: NVijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Removed out printing of DMA address, that causes warnings during
build.
Signed-off-by: NVijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Unmap PCI bars on remove().
Validate sysfs values before using them.
Signed-off-by: NVijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Accurately calculate the no. of pages from the bytes.
Signed-off-by: NVijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Update TODO list.
Signed-off-by: NVijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Block size is to be expressed in no. of 64 bit transfers. But the code
specifies the block size in bytes. Fix this issue.
Signed-off-by: NVijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- no DMA on stack
- cleanup unclear endianness issue
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It's now a "clean" driver.

Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

3 functions are now not used, remove them.

Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The previous patch broke the at76_usb driver due to some other
wireless core api changes.  This patch fixes the driver to build
properly again.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This updates drivers/staging/at76_usb to correspond with the latest
version previously available in wireless-testing.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

payload_length is unsigned, check before subtraction
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>

This fixes some compiler warnings in teh wlan-ng driver.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

ARRAY_SIZE is more concise to use when the size of an array is divided by
the size of its type or the size of its first element.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@i@
@@

#include <linux/kernel.h>

@depends on i using "paren.iso"@
type T;
T[] E;
@@

- (sizeof(E)/sizeof(E[...]))
+ ARRAY_SIZE(E)

@depends on i using "paren.iso"@
type T;
T[] E;
@@

- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/staging/wlan-ng/p80211conv.c
  drivers/staging/wlan-ng/p80211req.c
  drivers/staging/wlan-ng/p80211wext.c
  drivers/staging/wlan-ng/prism2mgmt.c

This patch removes the said #include <version.h>.
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

allow card to correctly receive network packets,
without this change all incoming packets are dropped.
code copied from the latest wlan-ng-devel tree.
Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>