[Why]
DalMPVisualConfirm does not support FreeSync 2 ARGB2101010 which causes
black visual confirm bar when playing HDR video on FreeSync 2 display in
full screen mode

[How]
Added pink color for DalMPVisualConfirm on FreeSync 2 ARGB2101010
surface
Signed-off-by: NPeikang Zhang <peikang.zhang@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Previously implemented early_cr_pattern was link level but the whole
asic should be affected.

[How]
 - change old link flag to dc level
 - new bit in dc->work_arounds set by DM
Signed-off-by: NMartin Leung <martin.leung@amd.com>
Reviewed-by: NJoshua Aberback <Joshua.Aberback@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Some displays clear ignore MSA bit on mode change, which cause
blackscreen when programming variable vtotals. Ignore MSA bit needs
programming needs to be delayed or re-set to be retained.

[How]
Create patch to delay programming ignore MSA bit after unblanking
stream.
Signed-off-by: NJaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
A software workaround is required for all vendor-built cards on platform.

[How]
When performing DP link training, we must send TPS1 before DPCD:100h is
written with the proper bit rate value. This change must be applies in
ALL cases when LT happens.
Signed-off-by: NDavid Galiffi <David.Galiffi@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Not programming dto with same values causes test failures in DCN2 diags
DPP tests.

[HOW]
This reverts commit 1b53e733.
Signed-off-by: NSung Lee <sung.lee@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Firmware state helps to debug sequence issues and hangs for DMCUB
commands and we don't have an easy mechanism to dump it from the driver.

[How]
Add a debugfs entry to dump the current firmware state.
Example usage:

cat /sys/kernel/debug/dri/0/amdgpu_dm_dmub_fw_state
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Currently DAL programs negative slope for the last point of output
transfer function curve.

[How]
Applying a check for the last PWL point for RGB values not to be
smaller than previous. If smaller, initialize the last point values
to a sum of previous PWL value and previous PWL delta;
Signed-off-by: NVladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
There are some structures and functions meant only to be used in the
scope of that single rn_clk_mgr c file.

[How]
Make structs and funcs static if only meant to be used within
rn_clk_mgr
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Make panel backlight and power on/off functions into
hardware specific function pointers

[How]
Add function pointers for panel related hw functions
 - is_panel_powered_on
 - is_panel_backlight_on
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when the rxstatus split was done the index was incorrect. This
lead to HDMI repeater authentication failure for HDCP2.X So fix it

Fixes: 30216900 ("drm/amd/display: split rxstatus for hdmi and dp")
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
When calculating nominal refresh rates, don't round.
Only the VSIF needs to be rounded.

[How]
Revert rounding change for nominal and just round when forming the
FreeSync VSIF.
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Unused VMIDs were not evicted correctly

[How]
1. evict_vmids() logic was fixed;
2. Added boundary check for add_ptb_to_table() and
   clear_entry_from_vmid_table() to avoid crash caused by array out of
   boundary;
3. For mod_vmid_get_for_ptb(), vimd is changed from unsigned to signed
   due to vimd is signed.
Signed-off-by: NPeikang Zhang <peikang.zhang@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Add optimization to allow pstate change support when all displays
are off in DCN2.

[How]
Add clk_mgr_helper_get_active_plane_cnt() to sum plane_count for all
valid stream_status[].  If plane_count is 0, then there are no active
or virtual streams present. Use plane_count == 0 as extra condition to
enable p_state_change_support in dcn2_update_clocks().
Signed-off-by: NSamson Tam <Samson.Tam@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We need DMCU for features like PSR and ABM.

[How]
Add path to dmcu firmware binary and load it for Navi12.
Signed-off-by: NRoman Li <roman.li@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
If we're doing backdoor load then do it entirely ourselves without
invoking any of the frontdoor path to avoid potential issues with
outdated tOS.

[How]
Check the load type and don't pass it to base if we don't want it
loaded.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
When we execute the first command for ASIC_INIT for command table
offloading we can hit a timing scenario such that the interrupts
for the inbox wptr haven't been enabled yet and the first command
is ignored until the second command is sent.

[How]
This happens when either the SCRATCH0 is already the correct status
code or autoload check is unsupported.

Clear SCRATCH0 during reset.

Also ensure that we don't accidentally reset the ASIC again in case
of a hang by clearing GPINT while we're at it.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
According to HW team, PG is dropped for NV12, but programming
the registers will still cause power to be consumed, so don't
program for NV12.

[How]
Set function pointer to NULL if NV12
Signed-off-by: NAlvin Lee <alvin.lee2@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHersen Wu <hersenxs.wu@amd.com>
Signed-off-by: NJerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHersen Wu <hersenxs.wu@amd.com>
Signed-off-by: NJerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Bugs occur when TX interrupt comes in when no USB-C on board.

[How]
Check PHY for USB-C before enabling TX interrupt in DMCU FW.
Signed-off-by: NAlvin Lee <alvin.lee2@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently there is a minor error in scaling filter coefficients
caused by truncation to fit the HW registers.This error accummulates
with increased taps, but has gone unnoticed due to vast majority of
scaling being done with only 4 taps.

Scaling filters are now updated using HW team's filter generator
which has quantization error minimization built in.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Since the i2c payload allocation can fail need to check return codes

[How]
Clean up i2c payload allocations and check for errors
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NJoshua Aberback <Joshua.Aberback@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
core_link_read_dpcd() will invoke dm_helpers_dp_read_dpcd(),
which needs to read dpcd info with the help of aconnector.
If aconnector (dc->links[i]->prev) is NULL, then dpcd status
 cannot be read.

As a result, dpcd read fails and a line of error will be
printed out in dmesg.log as:
"*ERROR* Failed to found connector for link!"

[How]
Make sure that aconnector (dc->links[i]->prev) is not NULL,
then read dpcd status.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NJoseph Gravenor <Joseph.Gravenor@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Using a heavy-weight TLB flush once is not sufficient. Concurrent
memory accesses in the same TLB cache line can re-populate TLB entries
from stale texture cache (TC) entries while the heavy-weight TLB
flush is in progress. To fix this race condition, perform another TLB
flush after the heavy-weight one, when TC is known to be clean.

Move the workaround into the low-level TLB flushing functions. This way
they apply to amdgpu as well, and KIQ-based TLB flush only needs to
synchronize once.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: Nshaoyun liu <shaoyun.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

for bare-metal we alawys need to load sys/sos/kdb
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

fixes S3 issue with IOMMU + S/G  enabled @ 64M VRAM.
Suggested-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NShirish S <shirish.s@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make the IP block base output debug only.
Reviewed-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

what:
some os preemption path is messed up with world switch preemption

fix:
cleanup those logics so os preemption not mixed with world switch

this patch is a general fix for issues comes from SRIOV MCBP, but
there is still UMD side issues not resovlved yet, so this patch
cannot fix all world switch bug.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Acked-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

fix system memory leak

v2:
fix coding style
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1)
we shouldn't load PSP kdb and sys/sos for VF, they are
supposed to be handled by hypervisor

2)
ih reroute doesn't work on VF thus we should avoid calling
it, besides VF should not use those PSP register sets for PF

3)
shouldn't load SMU ucode under SRIOV, otherwise PSP would report
error
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As the firmware versions of arcturus are different from other gfx9
ASICs. And the warning("CP firmware version too old, please update!")
caused by this check can be eliminated.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The rlc version of raven_kicer_rlc is different from the legacy rlc
version of raven_rlc. So it needs to add a judgement function for
raven_kicer_rlc and avoid disable GFXOFF when loading raven_kicer_rlc.
Signed-off-by: Nchangzhu <Changfeng.Zhu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When NBIO's RAS error happens, before trigging GPU reset, it's needed
to record error counter information, which can correct the error counter
value missed issue when reading from debugfs.
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Once sync flood interrupt is triggered by RAS error, before
actual GPU recovery job, it's necessary to log on and print
non-zero error counter, this will help user knows where the
RAS error source is from quickly.
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Clang warns:

../drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:980:36:
warning: address of 'sink->edid_caps.panel_patch.skip_scdc_overwrite'
will always evaluate to 'true' [-Wpointer-bool-conversion]
                if (&sink->edid_caps.panel_patch.skip_scdc_overwrite)
                ~~   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
1 warning generated.

This is probably not what was intended so remove the address of
operator, which matches how skip_scdc_overwrite is handled in the rest
of the driver.

While we're here, drop an extra newline after this if block.

Fixes: a760fc1b ("drm/amd/display: add monitor patch to disable SCDC read/write")
Link: https://github.com/ClangBuiltLinux/linux/issues/879Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NZhan Liu <zhan.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since 'smu_feature_is_enabled(smu, SMU_FEATURE_BACO_BIT)' will always return
false considering the 'smu_system_features_control(smu, false)' disabled
all SMU features.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The copy_to_user() function returns the number of bytes remaining to be
copied, but we want to return a negative error code to the user.

Fixes: 030d5b97 ("drm/amdgpu: use amdgpu_device_vram_access in amdgpu_ttm_vram_read")
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise we readback all ones.  Fixes rlc counter
readback while gfxoff is active.
Reviewed-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise we readback all ones.  Fixes rlc counter
readback while gfxoff is active.
Reviewed-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>