- 09 3月, 2021 40 次提交
-
-
由 Dave Hansen 提交于
stable inclusion from stable-5.10.15 commit 2ce5be67d134bc2488980ca4cd31b458c932d385 bugzilla: 48167 -------------------------------- commit 25a068b8 upstream. Jan Kiszka reported that the x2apic_wrmsr_fence() function uses a plain MFENCE while the Intel SDM (10.12.3 MSR Access in x2APIC Mode) calls for MFENCE; LFENCE. Short summary: we have special MSRs that have weaker ordering than all the rest. Add fencing consistent with current SDM recommendations. This is not known to cause any issues in practice, only in theory. Longer story below: The reason the kernel uses a different semantic is that the SDM changed (roughly in late 2017). The SDM changed because folks at Intel were auditing all of the recommended fences in the SDM and realized that the x2apic fences were insufficient. Why was the pain MFENCE judged insufficient? WRMSR itself is normally a serializing instruction. No fences are needed because the instruction itself serializes everything. But, there are explicit exceptions for this serializing behavior written into the WRMSR instruction documentation for two classes of MSRs: IA32_TSC_DEADLINE and the X2APIC MSRs. Back to x2apic: WRMSR is *not* serializing in this specific case. But why is MFENCE insufficient? MFENCE makes writes visible, but only affects load/store instructions. WRMSR is unfortunately not a load/store instruction and is unaffected by MFENCE. This means that a non-serializing WRMSR could be reordered by the CPU to execute before the writes made visible by the MFENCE have even occurred in the first place. This means that an x2apic IPI could theoretically be triggered before there is any (visible) data to process. Does this affect anything in practice? I honestly don't know. It seems quite possible that by the time an interrupt gets to consume the (not yet) MFENCE'd data, it has become visible, mostly by accident. To be safe, add the SDM-recommended fences for all x2apic WRMSRs. This also leaves open the question of the _other_ weakly-ordered WRMSR: MSR_IA32_TSC_DEADLINE. While it has the same ordering architecture as the x2APIC MSRs, it seems substantially less likely to be a problem in practice. While writes to the in-memory Local Vector Table (LVT) might theoretically be reordered with respect to a weakly-ordered WRMSR like TSC_DEADLINE, the SDM has this to say: In x2APIC mode, the WRMSR instruction is used to write to the LVT entry. The processor ensures the ordering of this write and any subsequent WRMSR to the deadline; no fencing is required. But, that might still leave xAPIC exposed. The safest thing to do for now is to add the extra, recommended LFENCE. [ bp: Massage commit message, fix typos, drop accidentally added newline to tools/arch/x86/include/asm/barrier.h. ] Reported-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200305174708.F77040DD@viggo.jf.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Lai Jiangshan 提交于
stable inclusion from stable-5.10.15 commit 3dcf233b5845c99a3a0d3a3049f9d0c1b68ed49b bugzilla: 48167 -------------------------------- commit 3943abf2 upstream. local_db_save() is called at the start of exc_debug_kernel(), reads DR7 and disables breakpoints to prevent recursion. When running in a guest (X86_FEATURE_HYPERVISOR), local_db_save() reads the per-cpu variable cpu_dr7 to check whether a breakpoint is active or not before it accesses DR7. A data breakpoint on cpu_dr7 therefore results in infinite #DB recursion. Disallow data breakpoints on cpu_dr7 to prevent that. Fixes: 84b6a349("x86/entry: Optimize local_db_save() for virt") Signed-off-by: NLai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210204152708.21308-2-jiangshanlai@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Lai Jiangshan 提交于
stable inclusion from stable-5.10.15 commit b796770c6db3dabe0daa7d7d1f04cc6afd53c569 bugzilla: 48167 -------------------------------- commit c4bed4b9 upstream. When FSGSBASE is enabled, paranoid_entry() fetches the per-CPU GSBASE value via __per_cpu_offset or pcpu_unit_offsets. When a data breakpoint is set on __per_cpu_offset[cpu] (read-write operation), the specific CPU will be stuck in an infinite #DB loop. RCU will try to send an NMI to the specific CPU, but it is not working either since NMI also relies on paranoid_entry(). Which means it's undebuggable. Fixes: eaad9812("x86/entry/64: Introduce the FIND_PERCPU_BASE macro") Signed-off-by: NLai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210204152708.21308-1-jiangshanlai@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Peter Zijlstra 提交于
stable inclusion from stable-5.10.15 commit c000dcfb3aede952db92086053d03be3da30487e bugzilla: 48167 -------------------------------- commit 9ad22e16 upstream. Tom reported that one of the GDB test-cases failed, and Boris bisected it to commit: d53d9bc0 ("x86/debug: Change thread.debugreg6 to thread.virtual_dr6") The debugging session led us to commit: 6c0aca28 ("x86: Ignore trap bits on single step exceptions") It turns out that TF and data breakpoints are both traps and will be merged, while instruction breakpoints are faults and will not be merged. This means 6c0aca28 is wrong, only TF and instruction breakpoints need to be excluded while TF and data breakpoints can be merged. [ bp: Massage commit message. ] Fixes: d53d9bc0 ("x86/debug: Change thread.debugreg6 to thread.virtual_dr6") Fixes: 6c0aca28 ("x86: Ignore trap bits on single step exceptions") Reported-by: NTom de Vries <tdevries@suse.de> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/YBMAbQGACujjfz%2Bi@hirez.programming.kicks-ass.net Link: https://lkml.kernel.org/r/20210128211627.GB4348@worktop.programming.kicks-ass.netSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Josh Poimboeuf 提交于
stable inclusion from stable-5.10.15 commit 2a2dfe6a319afb47448b28bedd65319aa59faef0 bugzilla: 48167 -------------------------------- commit 20bf2b37 upstream. With retpolines disabled, some configurations of GCC, and specifically the GCC versions 9 and 10 in Ubuntu will add Intel CET instrumentation to the kernel by default. That breaks certain tracing scenarios by adding a superfluous ENDBR64 instruction before the fentry call, for functions which can be called indirectly. CET instrumentation isn't currently necessary in the kernel, as CET is only supported in user space. Disable it unconditionally and move it into the x86's Makefile as CET/CFI... enablement should be a per-arch decision anyway. [ bp: Massage and extend commit message. ] Fixes: 29be86d7 ("kbuild: add -fcf-protection=none when using retpoline flags") Reported-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Reviewed-by: NNikolay Borisov <nborisov@suse.com> Tested-by: NNikolay Borisov <nborisov@suse.com> Cc: <stable@vger.kernel.org> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://lkml.kernel.org/r/20210128215219.6kct3h2eiustncws@trebleSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Waiman Long 提交于
stable inclusion from stable-5.10.15 commit 032f8e04c0353f015d243008f039bb6e18a173c7 bugzilla: 48167 -------------------------------- commit da74240e upstream. Commit 3fea5a49 ("mm: memcontrol: convert page cache to a new mem_cgroup_charge() API") introduced a bug in __add_to_page_cache_locked() causing the following splat: page dumped because: VM_BUG_ON_PAGE(page_memcg(page)) pages's memcg:ffff8889a4116000 ------------[ cut here ]------------ kernel BUG at mm/memcontrol.c:2924! invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 35 PID: 12345 Comm: cat Tainted: G S W I 5.11.0-rc4-debug+ #1 Hardware name: HP HP Z8 G4 Workstation/81C7, BIOS P60 v01.25 12/06/2017 RIP: commit_charge+0xf4/0x130 Call Trace: mem_cgroup_charge+0x175/0x770 __add_to_page_cache_locked+0x712/0xad0 add_to_page_cache_lru+0xc5/0x1f0 cachefiles_read_or_alloc_pages+0x895/0x2e10 [cachefiles] __fscache_read_or_alloc_pages+0x6c0/0xa00 [fscache] __nfs_readpages_from_fscache+0x16d/0x630 [nfs] nfs_readpages+0x24e/0x540 [nfs] read_pages+0x5b1/0xc40 page_cache_ra_unbounded+0x460/0x750 generic_file_buffered_read_get_pages+0x290/0x1710 generic_file_buffered_read+0x2a9/0xc30 nfs_file_read+0x13f/0x230 [nfs] new_sync_read+0x3af/0x610 vfs_read+0x339/0x4b0 ksys_read+0xf1/0x1c0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Before that commit, there was a try_charge() and commit_charge() in __add_to_page_cache_locked(). These two separated charge functions were replaced by a single mem_cgroup_charge(). However, it forgot to add a matching mem_cgroup_uncharge() when the xarray insertion failed with the page released back to the pool. Fix this by adding a mem_cgroup_uncharge() call when insertion error happens. Link: https://lkml.kernel.org/r/20210125042441.20030-1-longman@redhat.com Fixes: 3fea5a49 ("mm: memcontrol: convert page cache to a new mem_cgroup_charge() API") Signed-off-by: NWaiman Long <longman@redhat.com> Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <smuchun@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Hugh Dickins 提交于
stable inclusion from stable-5.10.15 commit 0a249ac189fc7fad3e989640384fde5fe62ac550 bugzilla: 48167 -------------------------------- commit 1c2f6730 upstream. Sergey reported deadlock between kswapd correctly doing its usual lock_page(page) followed by down_read(page->mapping->i_mmap_rwsem), and madvise(MADV_REMOVE) on an madvise(MADV_HUGEPAGE) area doing down_write(page->mapping->i_mmap_rwsem) followed by lock_page(page). This happened when shmem_fallocate(punch hole)'s unmap_mapping_range() reaches zap_pmd_range()'s call to __split_huge_pmd(). The same deadlock could occur when partially truncating a mapped huge tmpfs file, or using fallocate(FALLOC_FL_PUNCH_HOLE) on it. __split_huge_pmd()'s page lock was added in 5.8, to make sure that any concurrent use of reuse_swap_page() (holding page lock) could not catch the anon THP's mapcounts and swapcounts while they were being split. Fortunately, reuse_swap_page() is never applied to a shmem or file THP (not even by khugepaged, which checks PageSwapCache before calling), and anonymous THPs are never created in shmem or file areas: so that __split_huge_pmd()'s page lock can only be necessary for anonymous THPs, on which there is no risk of deadlock with i_mmap_rwsem. Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2101161409470.2022@eggly.anvils Fixes: c444eb56 ("mm: thp: make the THP mapcount atomic against __split_huge_pmd_locked()") Signed-off-by: NHugh Dickins <hughd@google.com> Reported-by: NSergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Rick Edgecombe 提交于
stable inclusion from stable-5.10.15 commit 9abdd2c05b59ad6f0ab4aaa3977c544c52d56f8a bugzilla: 48167 -------------------------------- commit 4f6ec860 upstream. When VM_MAP_PUT_PAGES was added, it was defined with the same value as VM_FLUSH_RESET_PERMS. This doesn't seem like it will cause any big functional problems other than some excess flushing for VM_MAP_PUT_PAGES allocations. Redefine VM_MAP_PUT_PAGES to have its own value. Also, rearrange things so flags are less likely to be missed in the future. Link: https://lkml.kernel.org/r/20210122233706.9304-1-rick.p.edgecombe@intel.com Fixes: b944afc9 ("mm: add a VM_MAP_PUT_PAGES flag for vmap") Signed-off-by: NRick Edgecombe <rick.p.edgecombe@intel.com> Suggested-by: NMatthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Rokudo Yan 提交于
stable inclusion from stable-5.10.15 commit 76303d3fab9fcd6167a87fd0ef0de9b3222e97da bugzilla: 48167 -------------------------------- commit 74e21484 upstream. In fast_isolate_freepages, high_pfn will be used if a prefered one (ie PFN >= low_fn) not found. But the high_pfn is not reset before searching an free area, so when it was used as freepage, it may from another free area searched before. As a result move_freelist_head(freelist, freepage) will have unexpected behavior (eg corrupt the MOVABLE freelist) Unable to handle kernel paging request at virtual address dead000000000200 Mem abort info: ESR = 0x96000044 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000044 CM = 0, WnR = 1 [dead000000000200] address between user and kernel address ranges -000|list_cut_before(inline) -000|move_freelist_head(inline) -000|fast_isolate_freepages(inline) -000|isolate_freepages(inline) -000|compaction_alloc(?, ?) -001|unmap_and_move(inline) -001|migrate_pages([NSD:0xFFFFFF80088CBBD0] from = 0xFFFFFF80088CBD88, [NSD:0xFFFFFF80088CBBC8] get_new_p -002|__read_once_size(inline) -002|static_key_count(inline) -002|static_key_false(inline) -002|trace_mm_compaction_migratepages(inline) -002|compact_zone(?, [NSD:0xFFFFFF80088CBCB0] capc = 0x0) -003|kcompactd_do_work(inline) -003|kcompactd([X19] p = 0xFFFFFF93227FBC40) -004|kthread([X20] _create = 0xFFFFFFE1AFB26380) -005|ret_from_fork(asm) The issue was reported on an smart phone product with 6GB ram and 3GB zram as swap device. This patch fixes the issue by reset high_pfn before searching each free area, which ensure freepage and freelist match when call move_freelist_head in fast_isolate_freepages(). Link: http://lkml.kernel.org/r/20190118175136.31341-12-mgorman@techsingularity.net Link: https://lkml.kernel.org/r/20210112094720.1238444-1-wu-yan@tcl.com Fixes: 5a811889 ("mm, compaction: use free lists to quickly locate a migration target") Signed-off-by: NRokudo Yan <wu-yan@tcl.com> Acked-by: NMel Gorman <mgorman@techsingularity.net> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Muchun Song 提交于
stable inclusion from stable-5.10.15 commit eca84ebef17f1564f2f25201f5c7ac173d54e32d bugzilla: 48167 -------------------------------- commit ecbf4724 upstream. The page_huge_active() can be called from scan_movable_pages() which do not hold a reference count to the HugeTLB page. So when we call page_huge_active() from scan_movable_pages(), the HugeTLB page can be freed parallel. Then we will trigger a BUG_ON which is in the page_huge_active() when CONFIG_DEBUG_VM is enabled. Just remove the VM_BUG_ON_PAGE. Link: https://lkml.kernel.org/r/20210115124942.46403-6-songmuchun@bytedance.com Fixes: 7e1f049e ("mm: hugetlb: cleanup using paeg_huge_active()") Signed-off-by: NMuchun Song <songmuchun@bytedance.com> Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com> Acked-by: NMichal Hocko <mhocko@suse.com> Reviewed-by: NOscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Muchun Song 提交于
stable inclusion from stable-5.10.15 commit 5b9631cb6f3493408c26fcbbf8b90bf49f31bfed bugzilla: 48167 -------------------------------- commit 0eb2df2b upstream. There is a race between isolate_huge_page() and __free_huge_page(). CPU0: CPU1: if (PageHuge(page)) put_page(page) __free_huge_page(page) spin_lock(&hugetlb_lock) update_and_free_page(page) set_compound_page_dtor(page, NULL_COMPOUND_DTOR) spin_unlock(&hugetlb_lock) isolate_huge_page(page) // trigger BUG_ON VM_BUG_ON_PAGE(!PageHead(page), page) spin_lock(&hugetlb_lock) page_huge_active(page) // trigger BUG_ON VM_BUG_ON_PAGE(!PageHuge(page), page) spin_unlock(&hugetlb_lock) When we isolate a HugeTLB page on CPU0. Meanwhile, we free it to the buddy allocator on CPU1. Then, we can trigger a BUG_ON on CPU0, because it is already freed to the buddy allocator. Link: https://lkml.kernel.org/r/20210115124942.46403-5-songmuchun@bytedance.com Fixes: c8721bbb ("mm: memory-hotplug: enable memory hotplug to handle hugepage") Signed-off-by: NMuchun Song <songmuchun@bytedance.com> Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com> Acked-by: NMichal Hocko <mhocko@suse.com> Reviewed-by: NOscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Muchun Song 提交于
stable inclusion from stable-5.10.15 commit e334b1fec6f426ce47967f390fd7c9c94c56dd5b bugzilla: 48167 -------------------------------- commit 7ffddd49 upstream. There is a race condition between __free_huge_page() and dissolve_free_huge_page(). CPU0: CPU1: // page_count(page) == 1 put_page(page) __free_huge_page(page) dissolve_free_huge_page(page) spin_lock(&hugetlb_lock) // PageHuge(page) && !page_count(page) update_and_free_page(page) // page is freed to the buddy spin_unlock(&hugetlb_lock) spin_lock(&hugetlb_lock) clear_page_huge_active(page) enqueue_huge_page(page) // It is wrong, the page is already freed spin_unlock(&hugetlb_lock) The race window is between put_page() and dissolve_free_huge_page(). We should make sure that the page is already on the free list when it is dissolved. As a result __free_huge_page would corrupt page(s) already in the buddy allocator. Link: https://lkml.kernel.org/r/20210115124942.46403-4-songmuchun@bytedance.com Fixes: c8721bbb ("mm: memory-hotplug: enable memory hotplug to handle hugepage") Signed-off-by: NMuchun Song <songmuchun@bytedance.com> Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com> Reviewed-by: NOscar Salvador <osalvador@suse.de> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Muchun Song 提交于
stable inclusion from stable-5.10.15 commit afe6c31b84f6f27ea54d5424af1ff186f01144e4 bugzilla: 48167 -------------------------------- commit 585fc0d2 upstream. If a new hugetlb page is allocated during fallocate it will not be marked as active (set_page_huge_active) which will result in a later isolate_huge_page failure when the page migration code would like to move that page. Such a failure would be unexpected and wrong. Only export set_page_huge_active, just leave clear_page_huge_active as static. Because there are no external users. Link: https://lkml.kernel.org/r/20210115124942.46403-3-songmuchun@bytedance.com Fixes: 70c3547e (hugetlbfs: add hugetlbfs_fallocate()) Signed-off-by: NMuchun Song <songmuchun@bytedance.com> Acked-by: NMichal Hocko <mhocko@suse.com> Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com> Reviewed-by: NOscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Dmitry Osipenko 提交于
stable inclusion from stable-5.10.15 commit 2de0745463e328d6f3f3f727011dd5767c4b5efa bugzilla: 48167 -------------------------------- commit 538eea53 upstream. The tegra_uart_config of the DEBUG_LL code is now placed right at the start of the .text section after commit which enabled debug output in the decompressor. Tegra devices are not booting anymore if DEBUG_LL is enabled since tegra_uart_config data is executes as a code. Fix the misplaced tegra_uart_config storage by embedding it into the code. Cc: stable@vger.kernel.org Fixes: 2596a72d ("ARM: 9009/1: uncompress: Enable debug in head.S") Reviewed-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Russell King 提交于
stable inclusion from stable-5.10.15 commit 384cddbee46f07b029c7b44622d504e6ec4b3e22 bugzilla: 48167 -------------------------------- commit 39d3454c upstream. Building with gcc 4.9.2 reveals a latent bug in the PCI accessors for Footbridge platforms, which causes a fatal alignment fault while accessing IO memory. Fix this by making the assembly volatile. Cc: stable@vger.kernel.org Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 H. Nikolaus Schaller 提交于
stable inclusion from stable-5.10.15 commit cc7b2fc9091626be615a938aa18c697e95ee0a97 bugzilla: 48167 -------------------------------- commit 18173982 upstream. With the arrival of commit 2fee9583 ("spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors") it was clarified what the proper state for cs-gpios should be, even if the flag is ignored. The driver code is doing the right thing since 766c6b63 ("spi: fix client driver breakages when using GPIO descriptors") The chip-select of the td028ttec1 panel is active-low, so we must omit spi-cs-high; attribute (already removed by separate patch) and should now use GPIO_ACTIVE_LOW for the client device description to be fully consistent. Fixes: 766c6b63 ("spi: fix client driver breakages when using GPIO descriptors") CC: stable@vger.kernel.org Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 H. Nikolaus Schaller 提交于
stable inclusion from stable-5.10.15 commit 160237c192c4b75f42c5971a66e88e822ae8fa9a bugzilla: 48167 -------------------------------- commit 07af7810 upstream. This reverts commit f1f028ff ("DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again") which had to be intruduced after commit 6953c57a ("gpio: of: Handle SPI chipselect legacy bindings") broke the GTA04 display. This contradicted the data sheet but was the only way to get it as an spi client operational again. The panel data sheet defines the chip-select to be active low. Now, with the arrival of commit 766c6b63 ("spi: fix client driver breakages when using GPIO descriptors") the logic of interaction between spi-cs-high and the gpio descriptor flags has been changed a second time, making the display broken again. So we have to remove the original fix which in retrospect was a workaround of a bug in the spi subsystem and not a feature of the panel or bug in the device tree. With this fix the device tree is back in sync with the data sheet and spi subsystem code. Fixes: 766c6b63 ("spi: fix client driver breakages when using GPIO descriptors") CC: stable@vger.kernel.org Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Sean Christopherson 提交于
stable inclusion from stable-5.10.15 commit 7159239d2de1eea77b322e661141a36c6a909b05 bugzilla: 48167 -------------------------------- commit 031b91a5 upstream. Set cr3_lm_rsvd_bits, which is effectively an invalid GPA mask, at vCPU reset. The reserved bits check needs to be done even if userspace never configures the guest's CPUID model. Cc: stable@vger.kernel.org Fixes: 0107973a ("KVM: x86: Introduce cr3_lm_rsvd_bits in kvm_vcpu_arch") Signed-off-by: NSean Christopherson <seanjc@google.com> Message-Id: <20210204000117.3303214-2-seanjc@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Sean Christopherson 提交于
stable inclusion from stable-5.10.15 commit d73af5ae22d419264208a5411cfaf5b3ccb1bd48 bugzilla: 48167 -------------------------------- commit 943dea8a upstream. Set the emulator context to PROT64 if SYSENTER transitions from 32-bit userspace (compat mode) to a 64-bit kernel, otherwise the RIP update at the end of x86_emulate_insn() will incorrectly truncate the new RIP. Note, this bug is mostly limited to running an Intel virtual CPU model on an AMD physical CPU, as other combinations of virtual and physical CPUs do not trigger full emulation. On Intel CPUs, SYSENTER in compatibility mode is legal, and unconditionally transitions to 64-bit mode. On AMD CPUs, SYSENTER is illegal in compatibility mode and #UDs. If the vCPU is AMD, KVM injects a #UD on SYSENTER in compat mode. If the pCPU is Intel, SYSENTER will execute natively and not trigger #UD->VM-Exit (ignoring guest TLB shenanigans). Fixes: fede8076 ("KVM: x86: handle wrap around 32-bit address space") Cc: stable@vger.kernel.org Signed-off-by: NJonny Barker <jonny@jonnybarker.com> [sean: wrote changelog] Signed-off-by: NSean Christopherson <seanjc@google.com> Message-Id: <20210202165546.2390296-1-seanjc@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Michael Roth 提交于
stable inclusion from stable-5.10.15 commit 46add0349ba3a9be96d3f1dd202bb589770798cc bugzilla: 48167 -------------------------------- commit 181f4948 upstream. Recent commit 255cbecf modified struct kvm_vcpu_arch to make 'cpuid_entries' a pointer to an array of kvm_cpuid_entry2 entries rather than embedding the array in the struct. KVM_SET_CPUID and KVM_SET_CPUID2 were updated accordingly, but KVM_GET_CPUID2 was missed. As a result, KVM_GET_CPUID2 currently returns random fields from struct kvm_vcpu_arch to userspace rather than the expected CPUID values. Fix this by treating 'cpuid_entries' as a pointer when copying its contents to userspace buffer. Fixes: 255cbecf ("KVM: x86: allocate vcpu->arch.cpuid_entries dynamically") Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NMichael Roth <michael.roth@amd.com.com> Message-Id: <20210128024451.1816770-1-michael.roth@amd.com> Cc: stable@vger.kernel.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Paolo Bonzini 提交于
stable inclusion from stable-5.10.15 commit 6c0e069ac6e8db0c49dcc90d37ede5b1da08fe0b bugzilla: 48167 -------------------------------- commit 7131636e upstream. Userspace that does not know about KVM_GET_MSR_FEATURE_INDEX_LIST will generally use the default value for MSR_IA32_ARCH_CAPABILITIES. When this happens and the host has tsx=on, it is possible to end up with virtual machines that have HLE and RTM disabled, but TSX_CTRL available. If the fleet is then switched to tsx=off, kvm_get_arch_capabilities() will clear the ARCH_CAP_TSX_CTRL_MSR bit and it will not be possible to use the tsx=off hosts as migration destinations, even though the guests do not have TSX enabled. To allow this migration, allow guests to write to their TSX_CTRL MSR, while keeping the host MSR unchanged for the entire life of the guests. This ensures that TSX remains disabled and also saves MSR reads and writes, and it's okay to do because with tsx=off we know that guests will not have the HLE and RTM features in their CPUID. (If userspace sets bogus CPUID data, we do not expect HLE and RTM to work in guests anyway). Cc: stable@vger.kernel.org Fixes: cbbaa272 ("KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES") Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Ben Gardon 提交于
stable inclusion from stable-5.10.15 commit dd7f10523b19c809b908be8b11da35c8e13e15f2 bugzilla: 48167 -------------------------------- commit 87aa9ec9 upstream. There is a bug in the TDP MMU function to zap SPTEs which could be replaced with a larger mapping which prevents the function from doing anything. Fix this by correctly zapping the last level SPTEs. Cc: stable@vger.kernel.org Fixes: 14881998 ("kvm: x86/mmu: Support disabling dirty logging for the tdp MMU") Signed-off-by: NBen Gardon <bgardon@google.com> Message-Id: <20210202185734.1680553-11-bgardon@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Sean Christopherson 提交于
stable inclusion from stable-5.10.15 commit ff0c437a0e02eb9ecc71f3907ca611ac57fdbcc6 bugzilla: 48167 -------------------------------- commit ccd85d90 upstream. Don't let KVM load when running as an SEV guest, regardless of what CPUID says. Memory is encrypted with a key that is not accessible to the host (L0), thus it's impossible for L0 to emulate SVM, e.g. it'll see garbage when reading the VMCB. Technically, KVM could decrypt all memory that needs to be accessible to the L0 and use shadow paging so that L0 does not need to shadow NPT, but exposing such information to L0 largely defeats the purpose of running as an SEV guest. This can always be revisited if someone comes up with a use case for running VMs inside SEV guests. Note, VMLOAD, VMRUN, etc... will also #GP on GPAs with C-bit set, i.e. KVM is doomed even if the SEV guest is debuggable and the hypervisor is willing to decrypt the VMCB. This may or may not be fixed on CPUs that have the SVME_ADDR_CHK fix. Cc: stable@vger.kernel.org Signed-off-by: NSean Christopherson <seanjc@google.com> Message-Id: <20210202212017.2486595-1-seanjc@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Thorsten Leemhuis 提交于
stable inclusion from stable-5.10.15 commit 720639ef01f5caf9090515ed45b4cd7f37a4cede bugzilla: 48167 -------------------------------- commit 538e4a8c upstream. Some Kingston A2000 NVMe SSDs sooner or later get confused and stop working when they use the deepest APST sleep while running Linux. The system then crashes and one has to cold boot it to get the SSD working again. Kingston seems to known about this since at least mid-September 2020: https://bbs.archlinux.org/viewtopic.php?pid=1926994#p1926994 Someone working for a German company representing Kingston to the German press confirmed to me Kingston engineering is aware of the issue and investigating; the person stated that to their current knowledge only the deepest APST sleep state causes trouble. Therefore, make Linux avoid it for now by applying the NVME_QUIRK_NO_DEEPEST_PS to this SSD. I have two such SSDs, but it seems the problem doesn't occur with them. I hence couldn't verify if this patch really fixes the problem, but all the data in front of me suggests it should. This patch can easily be reverted or improved upon if a better solution surfaces. FWIW, there are many reports about the issue scattered around the web; most of the users disabled APST completely to make things work, some just made Linux avoid the deepest sleep state: https://bugzilla.kernel.org/show_bug.cgi?id=195039#c65 https://bugzilla.kernel.org/show_bug.cgi?id=195039#c73 https://bugzilla.kernel.org/show_bug.cgi?id=195039#c74 https://bugzilla.kernel.org/show_bug.cgi?id=195039#c78 https://bugzilla.kernel.org/show_bug.cgi?id=195039#c79 https://bugzilla.kernel.org/show_bug.cgi?id=195039#c80 https://askubuntu.com/questions/1222049/nvmekingston-a2000-sometimes-stops-giving-response-in-ubuntu-18-04dell-inspir https://community.acer.com/en/discussion/604326/m-2-nvme-ssd-aspire-517-51g-issue-compatibility-kingston-a2000-linux-ubuntu For the record, some data from 'nvme id-ctrl /dev/nvme0' NVME Identify Controller: vid : 0x2646 ssvid : 0x2646 mn : KINGSTON SA2000M81000G fr : S5Z42105 [...] ps 0 : mp:9.00W operational enlat:0 exlat:0 rrt:0 rrl:0 rwt:0 rwl:0 idle_power:- active_power:- ps 1 : mp:4.60W operational enlat:0 exlat:0 rrt:1 rrl:1 rwt:1 rwl:1 idle_power:- active_power:- ps 2 : mp:3.80W operational enlat:0 exlat:0 rrt:2 rrl:2 rwt:2 rwl:2 idle_power:- active_power:- ps 3 : mp:0.0450W non-operational enlat:2000 exlat:2000 rrt:3 rrl:3 rwt:3 rwl:3 idle_power:- active_power:- ps 4 : mp:0.0040W non-operational enlat:15000 exlat:15000 rrt:4 rrl:4 rwt:4 rwl:4 idle_power:- active_power:- Cc: stable@vger.kernel.org # 4.14+ Signed-off-by: NThorsten Leemhuis <linux@leemhuis.info> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Xiaoguang Wang 提交于
stable inclusion from stable-5.10.15 commit 4f25d448d947fcf3afd288acb842dc4abeb4134c bugzilla: 48167 -------------------------------- commit d7e10d47 upstream. Abaci Robot reported following panic: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 800000010ef3f067 P4D 800000010ef3f067 PUD 10d9df067 PMD 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 1869 Comm: io_wqe_worker-0 Not tainted 5.11.0-rc3+ #1 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:put_files_struct+0x1b/0x120 Code: 24 18 c7 00 f4 ff ff ff e9 4d fd ff ff 66 90 0f 1f 44 00 00 41 57 41 56 49 89 fe 41 55 41 54 55 53 48 83 ec 08 e8 b5 6b db ff 41 ff 0e 74 13 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f e9 9c RSP: 0000:ffffc90002147d48 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88810d9a5300 RCX: 0000000000000000 RDX: ffff88810d87c280 RSI: ffffffff8144ba6b RDI: 0000000000000000 RBP: 0000000000000080 R08: 0000000000000001 R09: ffffffff81431500 R10: ffff8881001be000 R11: 0000000000000000 R12: ffff88810ac2f800 R13: ffff88810af38a00 R14: 0000000000000000 R15: ffff8881057130c0 FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010dbaa002 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __io_clean_op+0x10c/0x2a0 io_dismantle_req+0x3c7/0x600 __io_free_req+0x34/0x280 io_put_req+0x63/0xb0 io_worker_handle_work+0x60e/0x830 ? io_wqe_worker+0x135/0x520 io_wqe_worker+0x158/0x520 ? __kthread_parkme+0x96/0xc0 ? io_worker_handle_work+0x830/0x830 kthread+0x134/0x180 ? kthread_create_worker_on_cpu+0x90/0x90 ret_from_fork+0x1f/0x30 Modules linked in: CR2: 0000000000000000 ---[ end trace c358ca86af95b1e7 ]--- I guess case below can trigger above panic: there're two threads which operates different io_uring ctxs and share same sqthread identity, and later one thread exits, io_uring_cancel_task_requests() will clear task->io_uring->identity->files to be NULL in sqpoll mode, then another ctx that uses same identity will panic. Indeed we don't need to clear task->io_uring->identity->files here, io_grab_identity() should handle identity->files changes well, if task->io_uring->identity->files is not equal to current->files, io_cow_identity() should handle this changes well. Cc: stable@vger.kernel.org # 5.5+ Reported-by: NAbaci Robot <abaci@linux.alibaba.com> Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Reviewed-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Stylon Wang 提交于
stable inclusion from stable-5.10.15 commit 2fd938741a792a7fc3aaef6f7bccb2f08a0f1b3d bugzilla: 48167 -------------------------------- commit 1a10e524 upstream. This reverts commit b24bdc37. It caused memory leak after S3 on 4K HDMI displays. Signed-off-by: NStylon Wang <stylon.wang@amd.com> Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: NAnson Jacob <Anson.Jacob@amd.com> Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Ville Syrjälä 提交于
stable inclusion from stable-5.10.15 commit 09c6d51b16efc425d79d9a4c8db47706691d9605 bugzilla: 48167 -------------------------------- commit fad9bae9 upstream. Currently we only explicitly power up the combo PHY lanes for DP. The spec says we should do it for HDMI as well. Cc: stable@vger.kernel.org Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-3-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com> (cherry picked from commit 1e0cb7be) Signed-off-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Ville Syrjälä 提交于
stable inclusion from stable-5.10.15 commit 24946da51ce79557dbb7e42e360c57539b0a6566 bugzilla: 48167 -------------------------------- commit 425cbd1f upstream. Reduce the copypasta by pulling the combo PHY lane power up stuff into a helper. We'll have a third user soon. Cc: stable@vger.kernel.org Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-2-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com> (cherry picked from commit 5cdf706f) Signed-off-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
stable inclusion from stable-5.10.15 commit 1f27c7362e2b8967a494f1bfa911a8d79f4c4c5b bugzilla: 48167 -------------------------------- commit 00f9a08f upstream. Prevent the ICL HDR plane pipeline from performing YUV color range correction twice when the input is in limited range. This is done by removing the limited-range code from icl_program_input_csc(). Before this patch the following could happen: user space gives us a YUV buffer in limited range; per the pipeline in [1], the plane would first go through a "YUV Range correct" stage that expands the range; the plane would then go through the "Input CSC" stage which would also expand the range because icl_program_input_csc() would use a matrix and an offset that assume limited-range input; this would ultimately cause dark and light colors to appear darker and lighter than they should respectively. This is an issue because if a buffer switches between being scanned out and being composited with the GPU, the user will see a color difference. If this switching happens quickly and frequently, the user will perceive this as a flickering. [1] https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-icllp-vol12-displayengine_0.pdf#page=281 Cc: stable@vger.kernel.org Signed-off-by: NAndres Calderon Jaramillo <andrescj@chromium.org> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215224219.3896256-1-andrescj@google.com (cherry picked from commit fed38757) Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210202084553.30691-1-ville.syrjala@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Chris Wilson 提交于
stable inclusion from stable-5.10.15 commit 2545b18b98348da5c8f35b27327a6e1c154268e4 bugzilla: 48167 -------------------------------- commit e4747cb3 upstream. If we enable_breadcrumbs for a request while that request is being removed from HW; we may see that the request is active as we take the ce->signal_lock and proceed to attach the request to ce->signals. However, during unsubmission after marking the request as inactive, we see that the request has not yet been added to ce->signals and so skip the removal. Pull the check during cancel_breadcrumbs under the same spinlock as enabling so that we the two tests are consistent in enable/cancel. Otherwise, we may insert a request onto ce->signals that we expect should not be there: intel_context_remove_breadcrumbs:488 GEM_BUG_ON(!__i915_request_is_complete(rq)) While updating, we can note that we are always called with irqs-disabled, due to the engine->active.lock being held at the single caller, and so remove the irqsave/restore making it symmetric to enable_breadcrumbs. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2931 Fixes: c18636f7 ("drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Cc: <stable@vger.kernel.org> # v5.10+ Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210119162057.31097-1-chris@chris-wilson.co.uk (cherry picked from commit e7004ea4) Signed-off-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Chris Wilson 提交于
stable inclusion from stable-5.10.15 commit 1cd8e3ef7f68319c7108c9cd5a7f4f62d0ac1758 bugzilla: 48167 -------------------------------- commit 761c70a5 upstream. Simplify the frontbuffer unpin by removing the lock requirement. The LRU bumping was primarily to protect the GTT from being evicted and from frontbuffers being eagerly shrunk. Now we protect frontbuffers from the shrinker, and we avoid accidentally evicting from the GTT, so the benefit from bumping LRU is no more, and we can save more time by not. Reported-and-tested-by: NMatti Hämäläinen <ccr@tnsp.org> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2905 Fixes: c1793ba8 ("drm/i915: Add ww locking to pin_to_display_plane, v2.") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-6-chris@chris-wilson.co.uk (cherry picked from commit 14ca83ee) Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Imre Deak 提交于
stable inclusion from stable-5.10.15 commit 0fe98e455784a6c11e0dd48612acd343f4a46fce bugzilla: 48167 -------------------------------- commit 88255404 upstream. Atm the driver will calculate a wrong MST timeslots/MTP (aka time unit) value for MST streams if the link parameters (link rate or lane count) are limited in a way independent of the sink capabilities (reported by DPCD). One example of such a limitation is when a MUX between the sink and source connects only a limited number of lanes to the display and connects the rest of the lanes to other peripherals (USB). Another issue is that atm MST core calculates the divider based on the backwards compatible DPCD (at address 0x0000) vs. the extended capability info (at address 0x2200). This can result in leaving some part of the MST BW unused (For instance in case of the WD19TB dock). Fix the above two issues by calculating the PBN divider value based on the rate and lane count link parameters that the driver uses for all other computation. Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/2977 Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NVille Syrjala <ville.syrjala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-2-imre.deak@intel.com (cherry picked from commit b59c27ca) Signed-off-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Imre Deak 提交于
stable inclusion from stable-5.10.15 commit 8ef4cf6abaa7772c3f75f7bbe8bef2a8f5978de7 bugzilla: 48167 -------------------------------- commit 83404d58 upstream. This function will be needed by the next patch where the driver calculates the BW based on driver specific parameters, so export it. At the same time sanitize the function params, passing the more natural link rate instead of the encoding of the same rate. v2: - Fix function documentation. (Lyude) Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: <stable@vger.kernel.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NLyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-1-imre.deak@intel.com (cherry picked from commit a321fc2b) Signed-off-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Peter Gonda 提交于
stable inclusion from stable-5.10.15 commit 4f627ecde7329e476a077bb0590db8f27bb8f912 bugzilla: 48167 -------------------------------- commit 19a23da5 upstream. Grab kvm->lock before pinning memory when registering an encrypted region; sev_pin_memory() relies on kvm->lock being held to ensure correctness when checking and updating the number of pinned pages. Add a lockdep assertion to help prevent future regressions. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Sean Christopherson <seanjc@google.com> Cc: x86@kernel.org Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org Fixes: 1e80fdc0 ("KVM: SVM: Pin guest memory when SEV is active") Signed-off-by: NPeter Gonda <pgonda@google.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> V2 - Fix up patch description - Correct file paths svm.c -> sev.c - Add unlock of kvm->lock on sev_pin_memory error V1 - https://lore.kernel.org/kvm/20210126185431.1824530-1-pgonda@google.com/ Message-Id: <20210127161524.2832400-1-pgonda@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Fengnan Chang 提交于
stable inclusion from stable-5.10.15 commit a03a8693b1a26a3ea435fd4b9607de00c573c60b bugzilla: 48167 -------------------------------- commit f92e04f7 upstream. When analysing tuples fails we may loop indefinitely to retry. Let's avoid this by using a 10s timeout and bail if not completed earlier. Signed-off-by: NFengnan Chang <fengnanchang@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210123033230.36442-1-fengnanchang@gmail.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Ulf Hansson 提交于
stable inclusion from stable-5.10.15 commit 57b452c5ab1e0b3126e14856939170d7a9bc72ef bugzilla: 48167 -------------------------------- commit d7fb9c24 upstream. The implementation of sdhci_pltfm_suspend() is only available when CONFIG_PM_SLEEP is set, which triggers a linking error: "undefined symbol: sdhci_pltfm_suspend" when building sdhci-brcmstb.c. Fix this by implementing the missing stubs when CONFIG_PM_SLEEP is unset. Reported-by: NArnd Bergmann <arnd@arndb.de> Suggested-by: NFlorian Fainelli <f.fainelli@gmail.com> Fixes: 5b191dcb ("mmc: sdhci-brcmstb: Fix mmc timeout errors on S5 suspend") Cc: stable@vger.kernel.org Tested-By: NNicolas Schichan <nschichan@freeebox.fr> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Pavel Shilovsky 提交于
stable inclusion from stable-5.10.15 commit 2502610927ee51c11f3208c7a11a5661a7c78fa3 bugzilla: 48167 -------------------------------- commit 91792bb8 upstream. Currently we try to guess if a compound request is going to succeed waiting for credits or not based on the number of requests in flight. This approach doesn't work correctly all the time because there may be only one request in flight which is going to bring multiple credits satisfying the compound request. Change the behavior to fail a request only if there are no requests in flight at all and proceed waiting for credits otherwise. Cc: <stable@vger.kernel.org> # 5.1+ Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com> Reviewed-by: NTom Talpey <tom@talpey.com> Reviewed-by: NShyam Prasad N <nspmangalore@gmail.com> Signed-off-by: NSteve French <stfrench@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Gustavo A. R. Silva 提交于
stable inclusion from stable-5.10.15 commit b793e9fca6337841ca6ede9594f5c1c7e8ec3f1d bugzilla: 48167 -------------------------------- commit 8d8d1dbe upstream. While addressing some warnings generated by -Warray-bounds, I found this bug that was introduced back in 2017: CC [M] fs/cifs/smb2pdu.o fs/cifs/smb2pdu.c: In function ‘SMB2_negotiate’: fs/cifs/smb2pdu.c:822:16: warning: array subscript 1 is above array bounds of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds] 822 | req->Dialects[1] = cpu_to_le16(SMB30_PROT_ID); | ~~~~~~~~~~~~~^~~ fs/cifs/smb2pdu.c:823:16: warning: array subscript 2 is above array bounds of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds] 823 | req->Dialects[2] = cpu_to_le16(SMB302_PROT_ID); | ~~~~~~~~~~~~~^~~ fs/cifs/smb2pdu.c:824:16: warning: array subscript 3 is above array bounds of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds] 824 | req->Dialects[3] = cpu_to_le16(SMB311_PROT_ID); | ~~~~~~~~~~~~~^~~ fs/cifs/smb2pdu.c:816:16: warning: array subscript 1 is above array bounds of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds] 816 | req->Dialects[1] = cpu_to_le16(SMB302_PROT_ID); | ~~~~~~~~~~~~~^~~ At the time, the size of array _Dialects_ was changed from 1 to 3 in struct validate_negotiate_info_req, and then in 2019 it was changed from 3 to 4, but those changes were never made in struct smb2_negotiate_req, which has led to a 3 and a half years old out-of-bounds bug in function SMB2_negotiate() (fs/cifs/smb2pdu.c). Fix this by increasing the size of array _Dialects_ in struct smb2_negotiate_req to 4. Fixes: 9764c02f ("SMB3: Add support for multidialect negotiate (SMB2.1 and later)") Fixes: d5c7076b ("smb3: add smb3.1.1 to default dialect list") Cc: stable@vger.kernel.org Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: NSteve French <stfrench@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Joerg Roedel 提交于
stable inclusion from stable-5.10.15 commit e2bb221a16ac90a98c4fd2a6a4e0e096cba3bd45 bugzilla: 48167 -------------------------------- commit 4c9fb5d9 upstream. The dev_iommu_priv_get() needs a similar check to dev_iommu_fwspec_get() to make sure no NULL-ptr is dereferenced. Fixes: 05a0542b ("iommu/amd: Store dev_data as device iommu private data") Cc: stable@vger.kernel.org # v5.8+ Link: https://lore.kernel.org/r/20210202145419.29143-1-joro@8bytes.org Reference: https://bugzilla.kernel.org/show_bug.cgi?id=211241Signed-off-by: NJoerg Roedel <jroedel@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-
由 Aurelien Aptel 提交于
stable inclusion from stable-5.10.15 commit 7a3361e5ecf16c072609bfae898d1e9061552ed9 bugzilla: 48167 -------------------------------- commit 21b200d0 upstream. Assuming - //HOST/a is mounted on /mnt - //HOST/b is mounted on /mnt/b On a slow connection, running 'df' and killing it while it's processing /mnt/b can make cifs_get_inode_info() returns -ERESTARTSYS. This triggers the following chain of events: => the dentry revalidation fail => dentry is put and released => superblock associated with the dentry is put => /mnt/b is unmounted This patch makes cifs_d_revalidate() return the error instead of 0 (invalid) when cifs_revalidate_dentry() fails, except for ENOENT (file deleted) and ESTALE (file recreated). Signed-off-by: NAurelien Aptel <aaptel@suse.com> Suggested-by: NShyam Prasad N <nspmangalore@gmail.com> Reviewed-by: NShyam Prasad N <nspmangalore@gmail.com> CC: stable@vger.kernel.org Signed-off-by: NSteve French <stfrench@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com> Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
-