- 10 3月, 2017 1 次提交
-
-
由 VSR Burru 提交于
Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: NVSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com> Signed-off-by: NDerek Chickles <derek.chickles@cavium.com> Signed-off-by: NRaghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 3月, 2017 13 次提交
-
-
由 Jiri Pirko 提交于
This warnings may be hit even in case they should not - in case user puts a TC-flower rule which failed to be offloaded. So just remove them. Reported-by: NPetr Machata <petrm@mellanox.com> Reported-by: NIdo Schimmel <idosch@mellanox.com> Fixes: commit 7aa0f5aa ("mlxsw: spectrum: Implement TC flower offload") Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
KASAN detected a use-after-free: [ 269.467067] BUG: KASAN: use-after-free in vrf_xmit+0x7f1/0x827 [vrf] at addr ffff8800350a21c0 [ 269.467067] Read of size 4 by task ssh/1879 [ 269.467067] CPU: 1 PID: 1879 Comm: ssh Not tainted 4.10.0+ #249 [ 269.467067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 269.467067] Call Trace: [ 269.467067] dump_stack+0x81/0xb6 [ 269.467067] kasan_object_err+0x21/0x78 [ 269.467067] kasan_report+0x2f7/0x450 [ 269.467067] ? vrf_xmit+0x7f1/0x827 [vrf] [ 269.467067] ? ip_output+0xa4/0xdb [ 269.467067] __asan_load4+0x6b/0x6d [ 269.467067] vrf_xmit+0x7f1/0x827 [vrf] ... Which corresponds to the skb access after xmit handling. Fix by saving skb->len and using the saved value to update stats. Fixes: 193125db ("net: Introduce VRF device driver") Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarod Wilson 提交于
This restores the ability to set a team device's mtu to anything higher than 1500. Similar to the reported issue with bonding, the team driver calls ether_setup(), which sets an initial max_mtu of 1500, while the underlying hardware can handle something much larger. Just set it to ETH_MAX_MTU to support all possible values, and the limitations of the underlying devices will prevent setting anything too large. Fixes: 91572088 ("net: use core MTU range checking in core net infra") CC: Cong Wang <xiyou.wangcong@gmail.com> CC: Jiri Pirko <jiri@resnulli.us> CC: netdev@vger.kernel.org Signed-off-by: NJarod Wilson <jarod@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Those were supposed to go into the net-next tree not the net tree. Oops... Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christian Lamparter 提交于
Julian Margetson reported a panic on his SAM460EX with Kernel 4.11-rc1: | Unable to handle kernel paging request for data at address 0x00000014 | Oops: Kernel access of bad area, sig: 11 [#1] | PREEMPT | Canyonlands | Modules linked in: | CPU: 0 PID: 1 Comm: swapper Not tainted [...] | task: ea838000 task.stack: ea836000 | NIP: c0599f5c LR: c0599dd8 CTR: 00000000 | REGS: ea837c80 TRAP: 0300 Not tainted [...] | MSR: 00029000 <CE,EE,ME> | CR: 24371242 XER: 20000000 | DEAR: 00000014 ESR: 00000000 | GPR00: c0599ce8 ea837d30 ea838000 c0e52dcc c0d56ffb [...] | NIP [c0599f5c] emac_probe+0xfb4/0x1304 | LR [c0599dd8] emac_probe+0xe30/0x1304 | Call Trace: | [ea837d30] [c0599ce8] emac_probe+0xd40/0x1304 (unreliable) | [ea837d80] [c0533504] platform_drv_probe+0x48/0x90 | [ea837da0] [c0531c14] driver_probe_device+0x15c/0x2c4 | [ea837dd0] [c0531e04] __driver_attach+0x88/0xb0 | ---[ end trace ... ]--- The problem is caused by emac_dt_phy_probe() returing success (0) for existing device-trees configurations that do not specify a "phy-handle" property. This caused the code to skip the existing phy probe and setup. Which led to essential phy related data-structures being uninitialized. This patch also removes the unused variable in emac_dt_phy_connect(). Fixes: a577ca6b ("net: emac: add support for device-tree based PHY discovery and setup") Reported-by: NJulian Margetson <runaway@candw.ms> Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Tested-by: NGeoff Levand <geoff@infradead.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 3月, 2017 12 次提交
-
-
由 Thomas Falcon 提交于
The amount of TX/RX buffers that the vNIC driver currently allocates is different from the amount agreed upon in negotiation with firmware. Correct that by allocating the requested number of buffers confirmed by firmware. Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Falcon 提交于
Use a counter to track the number of outstanding transmissions sent that have not received completions. If the counter reaches the maximum number of queue entries, stop transmissions on that queue. As we receive more completions from firmware, wake the queue once the counter reaches an acceptable level. This patch prevents hardware/firmware TX queue from filling up and and generating errors. Since incorporating this fix, internal testing has reported that these firmware errors have stopped. Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
Configuring VLANs from the VF side had no effect, because the PF ignored filters of type VFPF_VLAN_FILTER in the VF-PF message. Add the missing filter type to configure. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
filters->count is the number of filters we were supposed to configure. There is no reason to increase it by +1 when printing the count in an error message. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
On failure to configure a VF MAC/VLAN filter we should not attempt to rollback filters that we failed to configure with -EEXIST. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
VFs are currently missing the VLAN filtering feature, because we were checking the PF's acquire response before actually performing the acquire. Fix it by setting the feature flag later when we have the PF response. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
It is too late to check for the limit of the number of VF multicast addresses after they have already been copied to the req->multicast[] array, possibly overflowing it. Do the check before copying. Also fix the error path to not skip unlocking vf2pf_mutex. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
When BNX2X_MSG_IOV is enabled, the driver produces too many VF statistics messages. Lower the verbosity of the VF stats messages similarly as in commit 76ca70fa ("bnx2x: [Debug] change verbosity of some prints"). Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
It is possible to crash the kernel by accessing a PTP device while its associated bnx2x interface is down. Before the interface is brought up, the timecounter is not initialized, so accessing it results in NULL dereference. Fix it by checking if the interface is up. Use -ENETDOWN as the error code when the interface is down. -EFAULT in bnx2x_ptp_adjfreq() did not seem right. Tested using phc_ctl get/set/adj/freq commands. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Blomme, Maarten 提交于
Signed-off-by: NMaarten Blomme <Maarten.Blomme@flir.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Blomme, Maarten 提交于
Signed-off-by: NMaarten Blomme <Maarten.Blomme@flir.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
The ethernet support now calls directly into the ipv6 core code, which fails if IPV6 is a loadable module but mlx5 is built-in: drivers/net/ethernet/mellanox/mlx5/core/en_tc.o: In function `mlx5e_create_encap_header_ipv6': en_tc.c:(.text.mlx5e_create_encap_header_ipv6+0x110): undefined reference to `ip6_route_output_flags' This adds a dependency to ensure that MLX5_CORE_EN can only be built if we are able link the kernel successfully. The downside is that the ethernet option can be hidden. Alternatively we could make MLX5_CORE depend on "IPV6 || !IPV6", which would force MLX5_CORE to be a module when IPV6 is, including in configurations where we don't use the ethernet support at all. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 3月, 2017 1 次提交
-
-
由 Florian Fainelli 提交于
The Generic PHY driver is a catch-all PHY driver and it should preserve whatever prior initialization has been done by boot loader or firmware agents. For specific PHY device configuration it is expected that a specialized PHY driver would take over that role. Resetting the generic PHY was a bad idea that has lead to several complaints and downstream workarounds e.g: in OpenWrt/LEDE so restore the behavior prior to 87aa9f9c ("net: phy: consolidate PHY reset in phy_init_hw()"). Reported-by: NFelix Fietkau <nbd@nbd.name> Fixes: 87aa9f9c ("net: phy: consolidate PHY reset in phy_init_hw()") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2017 8 次提交
-
-
由 Edward Cree 提交于
The value we read from the header is in network byte order, whereas EFX_POPULATE_QWORD_* takes values in host byte order (which it then converts to little-endian, as MCDI is little-endian). Fixes: e9117e50 ("sfc: Firmware-Assisted TSO version 2") Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edward Cree 提交于
It confuses sparse, which thinks the size isn't constant. Let's achieve the same thing with a BUILD_BUG_ON, since we know which one should be bigger and don't expect them ever to change. Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
dma_sync_single_for_*() takes the direction in which the buffer was mapped, not the direction of the sync. We should sync XDP buffers bidirectionally. Fixes: ecd63a02 ("nfp: add XDP support in the driver") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Since commit c0f031bc ("nfp_net: use alloc_frag() and build_skb()") we are allocating buffers which have to hold both the data and skb to be created in place by build_skb(). FW should only be told about the buffer space it can DMA to, that is without the build_skb() headroom and tailroom. Note: firmware applications should validate the buffers against both MTU and free list buffer size so oversized packets would not pass through the NIC anyway. Fixes: c0f031bc ("nfp: use alloc_frag() and build_skb()") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hari Vyas 提交于
ndo_set_mac_address() passes struct sockaddr * as 2nd parameter to bgmac_set_mac_address() but code assumed u8 *. This caused two bytes chopping and the wrong mac address was configured. Signed-off-by: NHari Vyas <hariv@broadcom.com> Signed-off-by: NJon Mason <jon.mason@broadcom.com> Fixes: 4e209001 ("bgmac: write mac address to hardware in ndo_set_mac_address") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Fix a bug in the 'bgmac' driver init sequence that blind writes for init sequence where it should preserve most bits other than the ones it is deliberately manipulating. The code now checks to see if the adapter needs to be brought out of reset (where as before it was doing an IDM write to bring it out of reset regardless of whether it was in reset or not). Also, removed unnecessary usleeps (as there is already a read present to flush the IDM writes). Signed-off-by: NZac Schroff <zschroff@broadcom.com> Signed-off-by: NJon Mason <jon.mason@broadcom.com> Fixes: f6a95a24 ("net: ethernet: bgmac: Add platform device support") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
This leads to a BUG of the following form: [ 174.512861] switch: port 2(vif3.0) entered disabled state [ 174.522735] BUG: sleeping function called from invalid context at /home/build/linux-linus/mm/vmalloc.c:1441 [ 174.523451] in_atomic(): 1, irqs_disabled(): 0, pid: 28, name: xenwatch [ 174.524131] CPU: 1 PID: 28 Comm: xenwatch Tainted: G W 4.10.0upstream-11073-g4977ab6e-dirty #1 [ 174.524819] Hardware name: MSI MS-7680/H61M-P23 (MS-7680), BIOS V17.0 03/14/2011 [ 174.525517] Call Trace: [ 174.526217] show_stack+0x23/0x60 [ 174.526899] dump_stack+0x5b/0x88 [ 174.527562] ___might_sleep+0xde/0x130 [ 174.528208] __might_sleep+0x35/0xa0 [ 174.528840] ? _raw_spin_unlock_irqrestore+0x13/0x20 [ 174.529463] ? __wake_up+0x40/0x50 [ 174.530089] remove_vm_area+0x20/0x90 [ 174.530724] __vunmap+0x1d/0xc0 [ 174.531346] ? delete_object_full+0x13/0x20 [ 174.531973] vfree+0x40/0x80 [ 174.532594] set_backend_state+0x18a/0xa90 [ 174.533221] ? dwc_scan_descriptors+0x24d/0x430 [ 174.533850] ? kfree+0x5b/0xc0 [ 174.534476] ? xenbus_read+0x3d/0x50 [ 174.535101] ? xenbus_read+0x3d/0x50 [ 174.535718] ? xenbus_gather+0x31/0x90 [ 174.536332] ? ___might_sleep+0xf6/0x130 [ 174.536945] frontend_changed+0x6b/0xd0 [ 174.537565] xenbus_otherend_changed+0x7d/0x80 [ 174.538185] frontend_changed+0x12/0x20 [ 174.538803] xenwatch_thread+0x74/0x110 [ 174.539417] ? woken_wake_function+0x20/0x20 [ 174.540049] kthread+0xe5/0x120 [ 174.540663] ? xenbus_printf+0x50/0x50 [ 174.541278] ? __kthread_init_worker+0x40/0x40 [ 174.541898] ret_from_fork+0x21/0x2c [ 174.548635] switch: port 2(vif3.0) entered disabled state This patch defers the vfree() until after the spinlock is released. Reported-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
This patch replaces use of 'be->vif' with 'vif' and hence generally makes the function look tidier. No semantic change. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 3月, 2017 5 次提交
-
-
由 Marc Kleine-Budde 提交于
This patch fixes the typo "Disble" -> "Disable". Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Marc Kleine-Budde 提交于
The priv->cmd_msg_buffer is allocated in the probe function, but never kfree()ed. This patch converts the kzalloc() to resource-managed kzalloc. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ethan Zonca 提交于
This patch fixes five minor style issues, spaces are between bitwise OR operators. Signed-off-by: NEthan Zonca <e@ethanzonca.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ethan Zonca 提交于
Fixes: 05ca5270 can: gs_usb: add ethtool set_phys_id callback to locate physical device The gs_usb driver is performing USB transfers using buffers allocated on the stack. This causes the driver to not function with vmapped stacks. Instead, allocate memory for the transfer buffers. Signed-off-by: NEthan Zonca <e@ethanzonca.com> Cc: linux-stable <stable@vger.kernel.org> # >= v4.8 Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Alexander Duyck 提交于
On architectures that have a cache line size larger than 64 Bytes we start running into issues where the amount of headroom for the frame starts shrinking. The size of skb_shared_info on a system with a 64B L1 cache line size is 320. This increases to 384 with a 128B cache line, and 512 with a 256B cache line. In addition the NET_SKB_PAD value increases as well consistent with the cache line size. As a result when we get to a 256B cache line as seen on the s390 we end up 768 bytes used by padding and shared info leaving us with only 1280 bytes to use for data storage. On architectures such as this we should default to using 3K Rx buffers out of a 8K page instead of trying to do 1.5K buffers out of a 4K page. To take all of this into account I have added one small check so that we compare the max_frame to the amount of actual data we can store. This was already occurring for igb, but I had overlooked it for ixgbe as it doesn't have strict limits for 82599 once we enable jumbo frames. By adding this check we will automatically enable 3K Rx buffers as soon as the maximum frame size we can handle drops below the standard Ethernet MTU. I also went through and fixed one small typo that I found where I had left an IGB in a variable name due to a copy/paste error. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-