Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 10 3月, 2017 3 次提交
    • Z
      rds: ib: add error handle · 3b12f73a
      由 Zhu Yanjun 提交于 
      In the function rds_ib_setup_qp, the error handle is missing. When some
error occurs, it is possible that memory leak occurs. As such, error
handle is added.

Cc: Joe Jin <joe.jin@oracle.com>
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NGuanglei Li <guanglei.li@oracle.com>
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3b12f73a
    • V
      liquidio: improve UDP TX performance · 67e303e0
      由 VSR Burru 提交于 
      Improve UDP TX performance by:
* reducing the ring size from 2K to 512
* replacing the numerous streaming DMA allocations for info buffers and
  gather lists with one large consistent DMA allocation per ring

BQL is not effective here.  We reduced the ring size because there is heavy
overhead with dma_map_single every so often.  With iommu=on, dma_map_single
in PF Tx data path was taking longer time (~700usec) for every ~250
packets.  Debugged intel_iommu code, and found that PF driver is utilizing
too many static IO virtual address mapping entries (for gather list entries
and info buffers): about 100K entries for two PF's each using 8 rings.
Also, finding an empty entry (in rbtree of device domain's iova mapping in
kernel) during Tx path becomes a bottleneck every so often; the loop to
find the empty entry goes through over 40K iterations; this is too costly
and was the major overhead.  Overhead is low when this loop quits quickly.

Netperf benchmark numbers before and after patch:

PF UDP TX
+--------+--------+------------+------------+---------+
|        |        |  Before    |  After     |         |
| Number |        |  Patch     |  Patch     |         |
|  of    | Packet | Throughput | Throughput | Percent |
| Flows  |  Size  |  (Gbps)    |  (Gbps)    | Change  |
+--------+--------+------------+------------+---------+
|        |   360  |   0.52     |   0.93     |  +78.9  |
|   1    |  1024  |   1.62     |   2.84     |  +75.3  |
|        |  1518  |   2.44     |   4.21     |  +72.5  |
+--------+--------+------------+------------+---------+
|        |   360  |   0.45     |   1.59     | +253.3  |
|   4    |  1024  |   1.34     |   5.48     | +308.9  |
|        |  1518  |   2.27     |   8.31     | +266.1  |
+--------+--------+------------+------------+---------+
|        |   360  |   0.40     |   1.61     | +302.5  |
|   8    |  1024  |   1.64     |   4.24     | +158.5  |
|        |  1518  |   2.87     |   6.52     | +127.2  |
+--------+--------+------------+------------+---------+

VF UDP TX
+--------+--------+------------+------------+---------+
|        |        |  Before    |  After     |         |
| Number |        |  Patch     |  Patch     |         |
|  of    | Packet | Throughput | Throughput | Percent |
| Flows  |  Size  |  (Gbps)    |  (Gbps)    | Change  |
+--------+--------+------------+------------+---------+
|        |   360  |   1.28     |   1.49     |  +16.4  |
|   1    |  1024  |   4.44     |   4.39     |   -1.1  |
|        |  1518  |   6.08     |   6.51     |   +7.1  |
+--------+--------+------------+------------+---------+
|        |   360  |   2.35     |   2.35     |    0.0  |
|   4    |  1024  |   6.41     |   8.07     |  +25.9  |
|        |  1518  |   9.56     |   9.54     |   -0.2  |
+--------+--------+------------+------------+---------+
|        |   360  |   3.41     |   3.65     |   +7.0  |
|   8    |  1024  |   9.35     |   9.34     |   -0.1  |
|        |  1518  |   9.56     |   9.57     |   +0.1  |
+--------+--------+------------+------------+---------+
Signed-off-by: NVSR Burru <veerasenareddy.burru@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDerek Chickles <derek.chickles@cavium.com>
Signed-off-by: NRaghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      67e303e0
    • D
      net: ipv6: Remove redundant RTA_OIF in multipath routes · 5be083ce
      由 David Ahern 提交于 
      Dinesh reported that RTA_MULTIPATH nexthops are 8-bytes larger with IPv6
than IPv4. The recent refactoring for multipath support in netlink
messages does discriminate between non-multipath which needs the OIF
and multipath which adds a rtnexthop struct for each hop making the
RTA_OIF attribute redundant. Resolve by adding a flag to the info
function to skip the oif for multipath.

Fixes: beb1afac ("net: ipv6: Add support to dump multipath routes
       via RTA_MULTIPATH attribute")
Reported-by: NDinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5be083ce
  3. 09 3月, 2017 13 次提交
  5. 08 3月, 2017 24 次提交
    • D
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec · 8474c8ca
      由 David S. Miller 提交于 
      Steffen Klassert says:

====================
pull request (net): ipsec 2017-03-06

1) Fix lockdep splat on xfrm policy subsystem initialization.
   From Florian Westphal.

2) When using socket policies on IPv4-mapped IPv6 addresses,
   we access the flow informations of the wrong address family
   what leads to an out of bounds access. Fix this by using
   the family we get with the dst_entry, like we do it for the
   standard policy lookup.

3) vti6 can report a PMTU below IPV6_MIN_MTU. Fix this by
   adding a check for that before sending a ICMPV6_PKT_TOOBIG
   message.

Please pull or let me know if there are problems.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8474c8ca
    • W
      ipv6: reorder icmpv6_init() and ip6_mr_init() · 15e66807
      由 WANG Cong 提交于 
      Andrey reported the following kernel crash:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 14446 Comm: syz-executor6 Not tainted 4.10.0+ #82
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff88001f311700 task.stack: ffff88001f6e8000
RIP: 0010:ip6mr_sk_done+0x15a/0x3d0 net/ipv6/ip6mr.c:1618
RSP: 0018:ffff88001f6ef418 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 1ffff10003edde8c RCX: ffffc900043ee000
RDX: 0000000000000004 RSI: ffffffff83e3b3f8 RDI: 0000000000000020
RBP: ffff88001f6ef508 R08: fffffbfff0dcc5d8 R09: 0000000000000000
R10: ffffffff86e62ec0 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: ffff88001f6ef4e0 R15: ffff8800380a0040
FS:  00007f7a52cec700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000061c500 CR3: 000000001f1ae000 CR4: 00000000000006f0
DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Call Trace:
 rawv6_close+0x4c/0x80 net/ipv6/raw.c:1217
 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425
 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:432
 sock_release+0x8d/0x1e0 net/socket.c:597
 __sock_create+0x39d/0x880 net/socket.c:1226
 sock_create_kern+0x3f/0x50 net/socket.c:1243
 inet_ctl_sock_create+0xbb/0x280 net/ipv4/af_inet.c:1526
 icmpv6_sk_init+0x163/0x500 net/ipv6/icmp.c:954
 ops_init+0x10a/0x550 net/core/net_namespace.c:115
 setup_net+0x261/0x660 net/core/net_namespace.c:291
 copy_net_ns+0x27e/0x540 net/core/net_namespace.c:396
9pnet_virtio: no channels available for device ./file1
 create_new_namespaces+0x437/0x9b0 kernel/nsproxy.c:106
 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205
 SYSC_unshare kernel/fork.c:2281 [inline]
 SyS_unshare+0x64e/0x1000 kernel/fork.c:2231
 entry_SYSCALL_64_fastpath+0x1f/0xc2

This is because net->ipv6.mr6_tables is not initialized at that point,
ip6mr_rules_init() is not called yet, therefore on the error path when
we iterator the list, we trigger this oops. Fix this by reordering
ip6mr_rules_init() before icmpv6_sk_init().
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      15e66807
    • E
      dccp: fix use-after-free in dccp_feat_activate_values · 62f8f4d9
      由 Eric Dumazet 提交于 
      Dmitry reported crashes in DCCP stack [1]

Problem here is that when I got rid of listener spinlock, I missed the
fact that DCCP stores a complex state in struct dccp_request_sock,
while TCP does not.

Since multiple cpus could access it at the same time, we need to add
protection.

[1]
BUG: KASAN: use-after-free in dccp_feat_activate_values+0x967/0xab0
net/dccp/feat.c:1541 at addr ffff88003713be68
Read of size 8 by task syz-executor2/8457
CPU: 2 PID: 8457 Comm: syz-executor2 Not tainted 4.10.0-rc7+ #127
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:15 [inline]
 dump_stack+0x292/0x398 lib/dump_stack.c:51
 kasan_object_err+0x1c/0x70 mm/kasan/report.c:162
 print_address_description mm/kasan/report.c:200 [inline]
 kasan_report_error mm/kasan/report.c:289 [inline]
 kasan_report.part.1+0x20e/0x4e0 mm/kasan/report.c:311
 kasan_report mm/kasan/report.c:332 [inline]
 __asan_report_load8_noabort+0x29/0x30 mm/kasan/report.c:332
 dccp_feat_activate_values+0x967/0xab0 net/dccp/feat.c:1541
 dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121
 dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457
 dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186
 dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711
 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322
 dst_input include/net/dst.h:507 [inline]
 ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203
 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190
 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228
 process_backlog+0xe5/0x6c0 net/core/dev.c:4839
 napi_poll net/core/dev.c:5202 [inline]
 net_rx_action+0xe70/0x1900 net/core/dev.c:5267
 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284
 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902
 </IRQ>
 do_softirq.part.17+0x1e8/0x230 kernel/softirq.c:328
 do_softirq kernel/softirq.c:176 [inline]
 __local_bh_enable_ip+0x1f2/0x200 kernel/softirq.c:181
 local_bh_enable include/linux/bottom_half.h:31 [inline]
 rcu_read_unlock_bh include/linux/rcupdate.h:971 [inline]
 ip6_finish_output2+0xbb0/0x23d0 net/ipv6/ip6_output.c:123
 ip6_finish_output+0x302/0x960 net/ipv6/ip6_output.c:148
 NF_HOOK_COND include/linux/netfilter.h:246 [inline]
 ip6_output+0x1cb/0x8d0 net/ipv6/ip6_output.c:162
 ip6_xmit+0xcdf/0x20d0 include/net/dst.h:501
 inet6_csk_xmit+0x320/0x5f0 net/ipv6/inet6_connection_sock.c:179
 dccp_transmit_skb+0xb09/0x1120 net/dccp/output.c:141
 dccp_xmit_packet+0x215/0x760 net/dccp/output.c:280
 dccp_write_xmit+0x168/0x1d0 net/dccp/output.c:362
 dccp_sendmsg+0x79c/0xb10 net/dccp/proto.c:796
 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
 sock_sendmsg_nosec net/socket.c:635 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:645
 SYSC_sendto+0x660/0x810 net/socket.c:1687
 SyS_sendto+0x40/0x50 net/socket.c:1655
 entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: 0033:0x4458b9
RSP: 002b:00007f8ceb77bb58 EFLAGS: 00000282 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000017 RCX: 00000000004458b9
RDX: 0000000000000023 RSI: 0000000020e60000 RDI: 0000000000000017
RBP: 00000000006e1b90 R08: 00000000200f9fe1 R09: 0000000000000020
R10: 0000000000008010 R11: 0000000000000282 R12: 00000000007080a8
R13: 0000000000000000 R14: 00007f8ceb77c9c0 R15: 00007f8ceb77c700
Object at ffff88003713be50, in cache kmalloc-64 size: 64
Allocated:
PID = 8446
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
 save_stack+0x43/0xd0 mm/kasan/kasan.c:502
 set_track mm/kasan/kasan.c:514 [inline]
 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:605
 kmem_cache_alloc_trace+0x82/0x270 mm/slub.c:2738
 kmalloc include/linux/slab.h:490 [inline]
 dccp_feat_entry_new+0x214/0x410 net/dccp/feat.c:467
 dccp_feat_push_change+0x38/0x220 net/dccp/feat.c:487
 __feat_register_sp+0x223/0x2f0 net/dccp/feat.c:741
 dccp_feat_propagate_ccid+0x22b/0x2b0 net/dccp/feat.c:949
 dccp_feat_server_ccid_dependencies+0x1b3/0x250 net/dccp/feat.c:1012
 dccp_make_response+0x1f1/0xc90 net/dccp/output.c:423
 dccp_v6_send_response+0x4ec/0xc20 net/dccp/ipv6.c:217
 dccp_v6_conn_request+0xaba/0x11b0 net/dccp/ipv6.c:377
 dccp_rcv_state_process+0x51e/0x1650 net/dccp/input.c:606
 dccp_v6_do_rcv+0x213/0x350 net/dccp/ipv6.c:632
 sk_backlog_rcv include/net/sock.h:893 [inline]
 __sk_receive_skb+0x36f/0xcc0 net/core/sock.c:479
 dccp_v6_rcv+0xba5/0x1d00 net/dccp/ipv6.c:742
 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322
 dst_input include/net/dst.h:507 [inline]
 ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203
 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190
 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228
 process_backlog+0xe5/0x6c0 net/core/dev.c:4839
 napi_poll net/core/dev.c:5202 [inline]
 net_rx_action+0xe70/0x1900 net/core/dev.c:5267
 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284
Freed:
PID = 15
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
 save_stack+0x43/0xd0 mm/kasan/kasan.c:502
 set_track mm/kasan/kasan.c:514 [inline]
 kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:578
 slab_free_hook mm/slub.c:1355 [inline]
 slab_free_freelist_hook mm/slub.c:1377 [inline]
 slab_free mm/slub.c:2954 [inline]
 kfree+0xe8/0x2b0 mm/slub.c:3874
 dccp_feat_entry_destructor.part.4+0x48/0x60 net/dccp/feat.c:418
 dccp_feat_entry_destructor net/dccp/feat.c:416 [inline]
 dccp_feat_list_pop net/dccp/feat.c:541 [inline]
 dccp_feat_activate_values+0x57f/0xab0 net/dccp/feat.c:1543
 dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121
 dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457
 dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186
 dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711
 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322
 dst_input include/net/dst.h:507 [inline]
 ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203
 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190
 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228
 process_backlog+0xe5/0x6c0 net/core/dev.c:4839
 napi_poll net/core/dev.c:5202 [inline]
 net_rx_action+0xe70/0x1900 net/core/dev.c:5267
 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284
Memory state around the buggy address:
 ffff88003713bd00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88003713bd80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88003713be00: fc fc fc fc fc fc fc fc fc fc fb fb fb fb fb fb
                                                          ^

Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Tested-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      62f8f4d9
    • T
      ibmvnic: Allocate number of rx/tx buffers agreed on by firmware · 068d9f90
      由 Thomas Falcon 提交于 
      The amount of TX/RX buffers that the vNIC driver currently allocates
is different from the amount agreed upon in negotiation with firmware.
Correct that by allocating the requested number of buffers confirmed
by firmware.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      068d9f90
    • T
      ibmvnic: Fix overflowing firmware/hardware TX queue · 142c0ac4
      由 Thomas Falcon 提交于 
      Use a counter to track the number of outstanding transmissions sent
that have not received completions. If the counter reaches the maximum
number of queue entries, stop transmissions on that queue. As we receive
more completions from firmware, wake the queue once the counter reaches
an acceptable level.

This patch prevents hardware/firmware TX queue from filling up and
and generating errors.  Since incorporating this fix, internal testing
has reported that these firmware errors have stopped.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      142c0ac4
    • A
      net/sched: act_skbmod: remove unneeded rcu_read_unlock in tcf_skbmod_dump · 6c4dc75c
      由 Alexey Khoroshilov 提交于 
      Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6c4dc75c
    • D
      Merge branch 'rds-fixes' · 72c3fbf8
      由 David S. Miller 提交于 
      Sowmini Varadhan says:

====================
rds: tcp: fix various rds-tcp issues during netns create/delete sequences

Dmitry Vyukov reported some syszkaller panics during netns deletion.

While I have not been able to reproduce those exact panics, my attempts
to do so uncovered a few other problems, which are fixed patch 2 and
patch 3 of this patch series. In addition, as mentioned in,
 https://www.spinics.net/lists/netdev/msg422997.html
code-inspection points that the rds_connection needs to take an explicit
refcnt on the struct net so that it is held down until all cleanup is
completed for netns removal, and this is fixed by patch1.

The following scripts were run concurrently to uncover/test patch{2, 3}
while simultaneously running rds-ping to 12.0.0.18 from another system:

  # cat del.rds
  while [ 1 ]; do
          modprobe rds_tcp
          modprobe -r rds-tcp
  done

  # cat del.netns
  while [ 1 ]; do
          ip netns delete blue
          ip netns add blue
          ip link add link eth1 address a:b:c:d:e:f blue0 type macvlan
          ip link set blue0 netns blue
          ip netns exec blue ip addr add 12.0.0.18/24 dev blue0
          ip netns exec blue ifconfig blue0 up
          sleep 3;
  done
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      72c3fbf8
    • S
      rds: tcp: Sequence teardown of listen and acceptor sockets to avoid races · b21dd450
      由 Sowmini Varadhan 提交于 
      Commit a93d01f5 ("RDS: TCP: avoid bad page reference in
rds_tcp_listen_data_ready") added the function
rds_tcp_listen_sock_def_readable()  to handle the case when a
partially set-up acceptor socket drops into rds_tcp_listen_data_ready().
However, if the listen socket (rtn->rds_tcp_listen_sock) is itself going
through a tear-down via rds_tcp_listen_stop(), the (*ready)() will be
null and we would hit a panic  of the form
  BUG: unable to handle kernel NULL pointer dereference at   (null)
  IP:           (null)
   :
  ? rds_tcp_listen_data_ready+0x59/0xb0 [rds_tcp]
  tcp_data_queue+0x39d/0x5b0
  tcp_rcv_established+0x2e5/0x660
  tcp_v4_do_rcv+0x122/0x220
  tcp_v4_rcv+0x8b7/0x980
    :
In the above case, it is not fatal to encounter a NULL value for
ready- we should just drop the packet and let the flush of the
acceptor thread finish gracefully.

In general, the tear-down sequence for listen() and accept() socket
that is ensured by this commit is:
     rtn->rds_tcp_listen_sock = NULL; /* prevent any new accepts */
     In rds_tcp_listen_stop():
         serialize with, and prevent, further callbacks using lock_sock()
         flush rds_wq
         flush acceptor workq
         sock_release(listen socket)
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b21dd450
    • S
      rds: tcp: Reorder initialization sequence in rds_tcp_init to avoid races · 16c09b1c
      由 Sowmini Varadhan 提交于 
      Order of initialization in rds_tcp_init needs to be done so
that resources are set up and destroyed in the correct synchronization
sequence with both the data path, as well as netns create/destroy
path. Specifically,

- we must call register_pernet_subsys and get the rds_tcp_netid
  before calling register_netdevice_notifier, otherwise we risk
  the sequence
    1. register_netdevice_notifier sets up netdev notifier callback
    2. rds_tcp_dev_event -> rds_tcp_kill_sock uses netid 0, and finds
       the wrong rtn, resulting in a panic with string that is of the form:

  BUG: unable to handle kernel NULL pointer dereference at 000000000000000d
  IP: rds_tcp_kill_sock+0x3a/0x1d0 [rds_tcp]
         :

- the rds_tcp_incoming_slab kmem_cache must be initialized before the
  datapath starts up. The latter can happen any time after the
  pernet_subsys registration of rds_tcp_net_ops, whose -> init
  function sets up the listen socket. If the rds_tcp_incoming_slab has
  not been set up at that time, a panic of the form below may be
  encountered

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000014
  IP: kmem_cache_alloc+0x90/0x1c0
     :
  rds_tcp_data_recv+0x1e7/0x370 [rds_tcp]
  tcp_read_sock+0x96/0x1c0
  rds_tcp_recv_path+0x65/0x80 [rds_tcp]
     :
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      16c09b1c
    • S
      rds: tcp: Take explicit refcounts on struct net · 8edc3aff
      由 Sowmini Varadhan 提交于 
      It is incorrect for the rds_connection to piggyback on the
sock_net() refcount for the netns because this gives rise to
a chicken-and-egg problem during rds_conn_destroy. Instead explicitly
take a ref on the net, and hold the netns down till the connection
tear-down is complete.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8edc3aff
    • D
      Merge branch 'sock_hold-misuses' · fa4c7fb2
      由 David S. Miller 提交于 
      Eric Dumazet says:

====================
net: fix possible sock_hold() misuses

skb_complete_wifi_ack() and skb_complete_tx_timestamp() currently
call sock_hold() on sockets that might have transitioned their sk_refcnt
to zero already.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fa4c7fb2
    • E
      net: fix socket refcounting in skb_complete_tx_timestamp() · 9ac25fc0
      由 Eric Dumazet 提交于 
      TX skbs do not necessarily hold a reference on skb->sk->sk_refcnt
By the time TX completion happens, sk_refcnt might be already 0.

sock_hold()/sock_put() would then corrupt critical state, like
sk_wmem_alloc and lead to leaks or use after free.

Fixes: 62bccb8c ("net-timestamp: Make the clone operation stand-alone from phy timestamping")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9ac25fc0
    • E
      net: fix socket refcounting in skb_complete_wifi_ack() · dd4f1072
      由 Eric Dumazet 提交于 
      TX skbs do not necessarily hold a reference on skb->sk->sk_refcnt
By the time TX completion happens, sk_refcnt might be already 0.

sock_hold()/sock_put() would then corrupt critical state, like
sk_wmem_alloc.

Fixes: bf7fa551 ("mac80211: Resolve sk_refcnt/sk_wmem_alloc issue in wifi ack path")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      dd4f1072
    • D
      rxrpc: Call state should be read with READ_ONCE() under some circumstances · 146d8fef
      由 David Howells 提交于 
      The call state may be changed at any time by the data-ready routine in
response to received packets, so if the call state is to be read and acted
upon several times in a function, READ_ONCE() must be used unless the call
state lock is held.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      146d8fef
    • E
      tcp: fix various issues for sockets morphing to listen state · 02b2faaf
      由 Eric Dumazet 提交于 
      Dmitry Vyukov reported a divide by 0 triggered by syzkaller, exploiting
tcp_disconnect() path that was never really considered and/or used
before syzkaller ;)

I was not able to reproduce the bug, but it seems issues here are the
three possible actions that assumed they would never trigger on a
listener.

1) tcp_write_timer_handler
2) tcp_delack_timer_handler
3) MTU reduction

Only IPv6 MTU reduction was properly testing TCP_CLOSE and TCP_LISTEN
 states from tcp_v6_mtu_reduced()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      02b2faaf
    • D
      Merge branch 'bnx2x-fixes' · b73d2da8
      由 David S. Miller 提交于 
      Michal Schmidt says:

====================
bnx2x: PTP crash, VF VLAN fixes

here are fixes for a crash with PTP, a crash in setting of VF multicast
addresses, and non-working VLAN filters configuration from the VF side.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b73d2da8
    • M
      bnx2x: add missing configuration of VF VLAN filters · e3951325
      由 Michal Schmidt 提交于 
      Configuring VLANs from the VF side had no effect, because the PF ignored
filters of type VFPF_VLAN_FILTER in the VF-PF message.

Add the missing filter type to configure.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e3951325
    • M
      bnx2x: fix incorrect filter count in an error message · 74bcbeb7
      由 Michal Schmidt 提交于 
      filters->count is the number of filters we were supposed to configure.
There is no reason to increase it by +1 when printing the count in an error
message.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      74bcbeb7
    • M
      bnx2x: do not rollback VF MAC/VLAN filters we did not configure · 78d55054
      由 Michal Schmidt 提交于 
      On failure to configure a VF MAC/VLAN filter we should not attempt to
rollback filters that we failed to configure with -EEXIST.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      78d55054
    • M
      bnx2x: fix detection of VLAN filtering feature for VF · 83bd9eb8
      由 Michal Schmidt 提交于 
      VFs are currently missing the VLAN filtering feature, because we were
checking the PF's acquire response before actually performing the acquire.

Fix it by setting the feature flag later when we have the PF response.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      83bd9eb8
    • M
      bnx2x: fix possible overrun of VFPF multicast addresses array · 22118d86
      由 Michal Schmidt 提交于 
      It is too late to check for the limit of the number of VF multicast
addresses after they have already been copied to the req->multicast[]
array, possibly overflowing it.

Do the check before copying.

Also fix the error path to not skip unlocking vf2pf_mutex.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      22118d86
    • M
      bnx2x: lower verbosity of VF stats debug messages · 850268d3
      由 Michal Schmidt 提交于 
      When BNX2X_MSG_IOV is enabled, the driver produces too many VF statistics
messages. Lower the verbosity of the VF stats messages similarly as in
commit 76ca70fa ("bnx2x: [Debug] change verbosity of some prints").
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      850268d3
    • M
      bnx2x: prevent crash when accessing PTP with interface down · 466e8bf1
      由 Michal Schmidt 提交于 
      It is possible to crash the kernel by accessing a PTP device while its
associated bnx2x interface is down. Before the interface is brought up,
the timecounter is not initialized, so accessing it results in NULL
dereference.

Fix it by checking if the interface is up.

Use -ENETDOWN as the error code when the interface is down.
 -EFAULT in bnx2x_ptp_adjfreq() did not seem right.

Tested using phc_ctl get/set/adj/freq commands.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      466e8bf1
    • B
      spi_ks8995: regs_size incorrect for some devices · 239870f2
      由 Blomme, Maarten 提交于 
      Signed-off-by: NMaarten Blomme <Maarten.Blomme@flir.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      239870f2