vimc is a single kernel module and does not need to
export any symbols therefore there is no need for these
declarations.
Signed-off-by: NDafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

since this function only calls v4l2_device_unregister_subdev,
it is pointless.
Signed-off-by: NDafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: NHelen Koike <helen.koike@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

according to the docs, this function must be called during
the cleanup phase after unregistering the entity.
Signed-off-by: NDafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: NHelen Koike <helen.koike@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

vimc_sen_add function first registers the subdevice and then
calls tpg_alloc. If tpg_alloc fails it unregisters the subdevice
and then frees vsen, this cause double free since the release
callback that follows subdevice unregistration also frees vsen.
Signed-off-by: NDafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: NHelen Koike <helen.koike@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Since the add callback returns NULL on failure and the array
is initialized to NULLs, there is no need for the intermediate
assignment to local var.
Signed-off-by: NDafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: NHelen Koike <helen.koike@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

since NULL value for vimc entity pointer indicates
that entity creation failed and this is tested, the
pointers should be initialized to NULL.
Signed-off-by: NDafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: NHelen Koike <helen.koike@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The touch timer is set up in intf1. If the second interface does not exist,
the timer and touch input device are not setup and we get the following
error, when touch events are reported via intf0.

kernel BUG at kernel/time/timer.c:956!
invalid opcode: 0000 [#1] SMP KASAN
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc1+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__mod_timer kernel/time/timer.c:956 [inline]
RIP: 0010:__mod_timer kernel/time/timer.c:949 [inline]
RIP: 0010:mod_timer+0x5a2/0xb50 kernel/time/timer.c:1100
Code: 45 10 c7 44 24 14 ff ff ff ff 48 89 44 24 08 48 8d 45 20 48 c7 44 24 18 00 00 00 00 48 89 04 24 e9 5a fc ff ff e8 ae ce 0e 00 <0f> 0b e8 a7 ce 0e 00 4c 89 74 24 20 e9 37 fe ff ff e8 98 ce 0e 00
RSP: 0018:ffff8881db209930 EFLAGS: 00010006
RAX: ffffffff86c2b200 RBX: 00000000ffffa688 RCX: ffffffff83efc583
RDX: 0000000000000100 RSI: ffffffff812f4d82 RDI: ffff8881d2356200
RBP: ffff8881d23561e8 R08: ffffffff86c2b200 R09: ffffed103a46abeb
R10: ffffed103a46abea R11: ffff8881d2355f53 R12: dffffc0000000000
R13: 1ffff1103b64132d R14: ffff8881d2355f50 R15: 0000000000000006
FS:  0000000000000000(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f75e2799000 CR3: 00000001d3b07000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 imon_touch_event drivers/media/rc/imon.c:1348 [inline]
 imon_incoming_packet.isra.0+0x2546/0x2f10 drivers/media/rc/imon.c:1603
 usb_rx_callback_intf0+0x151/0x1e0 drivers/media/rc/imon.c:1734
 __usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1654
 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1719
 dummy_timer+0x120f/0x2fa2 drivers/usb/gadget/udc/dummy_hcd.c:1965
 call_timer_fn+0x179/0x650 kernel/time/timer.c:1404
 expire_timers kernel/time/timer.c:1449 [inline]
 __run_timers kernel/time/timer.c:1773 [inline]
 __run_timers kernel/time/timer.c:1740 [inline]
 run_timer_softirq+0x5e3/0x1490 kernel/time/timer.c:1786
 __do_softirq+0x221/0x912 kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0x178/0x1a0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x12f/0x500 arch/x86/kernel/apic/apic.c:1137
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
 </IRQ>
RIP: 0010:default_idle+0x28/0x2e0 arch/x86/kernel/process.c:581
Code: 90 90 41 56 41 55 65 44 8b 2d 44 3a 8f 7a 41 54 55 53 0f 1f 44 00 00 e8 36 ee d0 fb e9 07 00 00 00 0f 00 2d fa dd 4f 00 fb f4 <65> 44 8b 2d 20 3a 8f 7a 0f 1f 44 00 00 5b 5d 41 5c 41 5d 41 5e c3
RSP: 0018:ffffffff86c07da8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000007 RBX: ffffffff86c2b200 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffffff86c2ba4c
RBP: fffffbfff0d85640 R08: ffffffff86c2b200 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 cpuidle_idle_call kernel/sched/idle.c:154 [inline]
 do_idle+0x3b6/0x500 kernel/sched/idle.c:263
 cpu_startup_entry+0x14/0x20 kernel/sched/idle.c:355
 start_kernel+0x82a/0x864 init/main.c:784
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241
Modules linked in:

Reported-by: syzbot+f49d12d34f2321cf4df2@syzkaller.appspotmail.com
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This patch corrects the SPDX License Identifier style
in header file related to media Drivers for Analog TV Tuners.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: NJoe Perches <joe@perches.com>
Signed-off-by: NNishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Rename the confusingly named smiapp_update_mode() function as
smiapp_pll_blanking_update(). The function is used to calculate new PLL
and blanking configuration after binning or scaling configuration has been
changed.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Earlier it was possible that the parts of the driver that assumed runtime
PM was enabled were being called before runtime PM was enabled in the
driver's probe function. So enable runtime PM before registering the
sub-device.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Use non-binned limits when binning is disabled and binned when they're
enabled.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The sensor configuration since it was previously powered off was not
changed, so no need to update the PLL configuration etc. What is necessary
though is to re-apply the configuration to the sensor's registers.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Only write the binning configuration at stream start. It has no effect
otherwise.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The driver implementation assumed the binning limits could change
dynamically based on the binning configuration. This is not actually the
case; these limits are static and suitable to be used with all binning
configurations but possibly not optimal limit for many of those
configurations.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Destroy the mutex initialised by the driver in probe.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The nokia,nvm-size property was used to tell the size of the NVM memory
accessible through the sensor's register interface. However, while the
size isn't directly readable through the sensor's register interface, it
can be detected reading the NVM memory until the selected page is no
longer available.

Thus remove this property.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The interface supports probing for the NVM size but this was not
implemented in the driver. Do that now.

This will also make nokia,nvm-size property redundant.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Only some devices require polling for NVM ready. Do the polling only on
devices that need it.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The data transfer capability register was defined but its bits were not.
Do that now.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Split out reading a single NVM page into a separate function.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

If NVM reading failed, the device was left powered on. Fix that.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The BIT macro is a better way to define register bits, for 1 << bit is
risky for 32-bit registers.

Also remove the definition of SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN which
has a value of zero.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

devm_regulator_get may return an error but mipi_csis_phy_init misses
a check for it.
This may lead to problems when regulator_set_voltage uses the unchecked
pointer.
This patch adds a check for devm_regulator_get to avoid potential risk.
Signed-off-by: NChuhong Yuan <hslester96@gmail.com>
Reviewed-by: NRui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

mipid02_probe misses a check for devm_gpiod_get_optional and may miss
the failure.
Add a check to fix the problem.
Signed-off-by: NChuhong Yuan <hslester96@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add driver for Sony IMX290 CMOS image sensor driver. The driver only
supports I2C interface for programming and MIPI CSI-2 for sensor output.

[Sakari Ailus: Rewrapped a few lines over 80 chars a little.]
Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add devicetree binding for IMX290 CMOS image sensor. Let's also
add MAINTAINERS entry for the binding and driver.
Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

If VIDEO_OV5695 is y and V4L2_FWNODE is m, building fails:

drivers/media/i2c/ov5695.o: In function `ov5695_probe':
ov5695.c:(.text+0xf4c): undefined reference to `v4l2_async_register_subdev_sensor_common'

Select V4L2_FWNODE like OV5675 does.

Fixes: 623df5d7 ("media: i2c: ov5695: Modify the function of async register subdev related devices")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

According to the datasheet, both AD5821 and AD5820 share a compatible
register-set:
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5821.pdf

Some camera modules also refer that AD5823 is a replacement of AD5820:
https://download.kamami.com/p564094-OV8865_DS.pdfSuggested-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRicardo Ribalda Delgado <ribalda@kernel.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Document new compatible devices.

Cc: devicetree@vger.kernel.org
Signed-off-by: NRicardo Ribalda Delgado <ribalda@kernel.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Since kernel 4.16, i2c devices with DT compatible tag are modprobed
using their DT modalias.
Without this patch, if this driver is build as module it would never
be autoprobed.

There is no need to mask it with CONFIG_OF to allow ACPI loading, this
also builds find with CONFIG_OF=n.
Signed-off-by: NRicardo Ribalda Delgado <ribalda@kernel.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This patch adds support for a programmable enable pin. It can be used in
situations where the ANA-vcc is not configurable (dummy-regulator), or
just to have a more fine control of the power saving.

The use of the enable pin is optional.
Signed-off-by: NRicardo Ribalda Delgado <ribalda@kernel.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Document new enable-gpio field. It can be used to disable the part
without turning down its regulator.

Cc: devicetree@vger.kernel.org
Signed-off-by: NRicardo Ribalda Delgado <ribalda@kernel.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Without this patch, media_device_register_entity throws a warning:

dev_warn(mdev->dev,
	 "Entity type for entity %s was not initialized!\n",
	 entity->name);
Signed-off-by: NRicardo Ribalda Delgado <ribalda@kernel.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The sensor data sheet clearly state that 2592x1944 only works at 15 fps
make sure we don't try to miss configure the pll out of acceptable
range.
Signed-off-by: NBenoit Parrot <bparrot@ti.com>
Reviewed-by: NJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

In the 1920x1080 register array an extra pair of reset ctrl disable
re-enable was causing unwanted init delays.
Signed-off-by: NBenoit Parrot <bparrot@ti.com>
Reviewed-by: NJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add v4l2 controls to report the pixel rates of each mode. This is
needed by some CSI2 receiver in order to perform proper DPHY
configuration.
Signed-off-by: NBenoit Parrot <bparrot@ti.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The variable rval is being initialized with a value that
is never read and is being re-assigned a little later on. The
assignment is redundant and hence can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

A hardcoded 12 MHz master clock frequency has been assumed since
conversion of the driver from soc_camera sensor to a standalone V4L2
subdevice by commit 23a52386 ("media: ov6650: convert to standalone
v4l2 subdevice").  Fix it.

Define a static table of supported master clock rates (fix misnamed
symbol while being at it), then use v4l2_clk_get/set_rate() to obtain
a clock rate matching one of those supported.  On success, apply
respective master clock hardware divisor provided by the matching
element of the table.

[Sakari Ailus: Initialize xclk to NULL.]
Signed-off-by: NJanusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This field of the driver private structure is no longer used, drop it.
Signed-off-by: NJanusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

As calculation of pixel clock hardware divisor no longer depends on
mbus format specific maximum pixel clock, there is no need to reapply
the divisor on format change.  Drop related code from ov6650_s_fmt()
helper.

Since a master clock hardware divisor, so far applied only together
with the pixel clock divisor in a single operation, will no longer be
applied from ov6650_s_fmt(), apply it, still using a hardcoded value
for now, from  ov6650_prog_dflt() helper so hardware is still
initialised correctly on device probe.
Signed-off-by: NJanusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>