media: smiapp: Use the BIT macro where appropriate, remove useless definition

The BIT macro is a better way to define register bits, for 1 << bit is
risky for 32-bit registers.

Also remove the definition of SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN which
has a value of zero.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/media/i2c/smiapp/smiapp-core.c

@@ -986,8 +986,7 @@ static int smiapp_read_nvm(struct smiapp_sensor *sensor,
 
 		rval = smiapp_write(sensor,
 				    SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL,
-				    SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN |
-				    SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN);
+				    SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN);
 		if (rval)
 			goto out;
 

drivers/media/i2c/smiapp/smiapp-reg.h

@@ -11,25 +11,26 @@
 #ifndef __SMIAPP_REG_H_
 #define __SMIAPP_REG_H_
 
+#include <linux/bits.h>
+
 #include "smiapp-reg-defs.h"
 
 /* Bits for above register */
-#define SMIAPP_IMAGE_ORIENTATION_HFLIP		(1 << 0)
-#define SMIAPP_IMAGE_ORIENTATION_VFLIP		(1 << 1)
-
-#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN		(1 << 0)
-#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN		(0 << 1)
-#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_WR_EN		(1 << 1)
-#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_ERR_CLEAR	(1 << 2)
-#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY	(1 << 0)
-#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_WR_READY	(1 << 1)
-#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EDATA		(1 << 2)
-#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EUSAGE		(1 << 3)
-
-#define SMIAPP_SOFTWARE_RESET				(1 << 0)
-
-#define SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE	(1 << 0)
-#define SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE	(1 << 1)
+#define SMIAPP_IMAGE_ORIENTATION_HFLIP			BIT(0)
+#define SMIAPP_IMAGE_ORIENTATION_VFLIP			BIT(1)
+
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN		BIT(0)
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_WR_EN		BIT(1)
+#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_ERR_CLEAR	BIT(2)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY	BIT(0)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_WR_READY	BIT(1)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EDATA		BIT(2)
+#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EUSAGE		BIT(3)
+
+#define SMIAPP_SOFTWARE_RESET				BIT(0)
+
+#define SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE	BIT(0)
+#define SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE	BIT(1)
 
 #define SMIAPP_DPHY_CTRL_AUTOMATIC			0
 /* DPHY control based on REQUESTED_LINK_BIT_RATE_MBPS */