- 27 12月, 2019 40 次提交
-
-
由 Tristram Ha 提交于
[ Upstream commit 899ecaed ] Socket buffer is not re-created when headroom is 2 and tailroom is 1. Signed-off-by: NTristram Ha <Tristram.Ha@microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Masahisa Kojima 提交于
[ Upstream commit 8e850f25 ] In ndo_stop, driver resets the netsec ethernet controller IP. When the netsec IP is reset, HW running mode turns to NRM mode and driver has to wait until this mode transition completes. But mode transition to NRM will not complete if the PHY is in normal operation state. Netsec IP requires PHY is in power down state when it is reset. This modification stops the PHY before resetting netsec. Together with this modification, phy_addr is stored in netsec_priv structure because ndev->phydev is not yet ready in ndo_init. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: NMasahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: NYoshitoyo Osaki <osaki.yoshitoyo@socionext.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Ivan Khoronzhuk 提交于
[ Upstream commit 9737cc99 ] After flushing all mcast entries from the table, the ones contained in mc list of ndev are not restored when promisc mode is toggled off, because they are considered as synched with ALE, thus, in order to restore them after promisc mode - reset syncing info. This fix touches only switch mode devices, including single port boards like Beagle Bone. Fixes: commit 5da19489 ("net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update") Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: NGrygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Dan Carpenter 提交于
[ Upstream commit c94f026f ] These functions are supposed to return one on failure and zero on success. Returning a zero here could cause uninitialized variable bugs in several of the callers. For example: drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:1660 get_iscsi_dcb_priority() error: uninitialized symbol 'caps'. Fixes: 48365e48 ("qlcnic: dcb: Add support for CEE Netlink interface.") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Netanel Belgazal 提交于
[ Upstream commit 8c590f97 ] The Kconfig limitation of X86 is to too wide. The ENA driver only requires a little endian dependency. Change the dependency to be on little endian CPU. Signed-off-by: NNetanel Belgazal <netanel@amazon.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Jakub Kicinski 提交于
[ Upstream commit 527db74b ] Atomic operations on the NFP are currently always in big endian. The driver keeps track of regions of memory storing atomic values and byte swaps them accordingly. There are corner cases where the map values may be initialized before the driver knows they are used as atomic counters. This can happen either when the datapath is performing the update and the stack contents are unknown or when map is updated before the program which will use it for atomic values is loaded. To avoid situation where user initializes the value to 0 1 2 3 and then after loading a program which uses the word as an atomic counter starts reading 3 2 1 0 - only allow atomic counters to be initialized to endian-neutral values. For updates from the datapath the stack information may not be as precise, so just allow initializing such values to 0. Example code which would break: struct bpf_map_def SEC("maps") rxcnt = { .type = BPF_MAP_TYPE_HASH, .key_size = sizeof(__u32), .value_size = sizeof(__u64), .max_entries = 1, }; int xdp_prog1() { __u64 nonzeroval = 3; __u32 key = 0; __u64 *value; value = bpf_map_lookup_elem(&rxcnt, &key); if (!value) bpf_map_update_elem(&rxcnt, &key, &nonzeroval, BPF_ANY); else __sync_fetch_and_add(value, 1); return XDP_PASS; } $ offload bpftool map dump key: 00 00 00 00 value: 00 00 00 03 00 00 00 00 should be: $ offload bpftool map dump key: 00 00 00 00 value: 03 00 00 00 00 00 00 00 Reported-by: NDavid Beckett <david.beckett@netronome.com> Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Rahul Verma 提交于
[ Upstream commit 706d0891 ] Align the use of local PTT to propagate through the qed_mcp* API's. Global ptt should not be used. Register access should be done through layers. Register address is mapped into a PTT, PF translation table. Several interface functions require a PTT to direct read/write into register. There is a pool of PTT maintained, and several PTT are used simultaneously to access device registers in different flows. Same PTT should not be used in flows that can run concurrently. To avoid running out of PTT resources, too many PTT should not be acquired without releasing them. Every PF has a global PTT, which is used throughout the life of PF, in most important flows for register access. Generic functions acquire the PTT locally and release after the use. This patch aligns the use of Global PTT and Local PTT accordingly. Signed-off-by: NRahul Verma <rahul.verma@cavium.com> Signed-off-by: NAriel Elior <ariel.elior@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Maor Gottlieb 提交于
[ Upstream commit 97fd8da2 ] Once all the large flow groups (defined by the user when the flow table is created - max_num_groups) were created, then all the following new flow groups will have only one flow table entry, even though the flow table has place to larger groups. Fix the condition to prefer large flow group. Fixes: f0d22d18 ("net/mlx5_core: Introduce flow steering autogrouped flow table") Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Eran Ben Elisha 提交于
[ Upstream commit 30e9e055 ] Array mlxfw_fsm_state_err_str contains value to string translation, when values are provided by mlxfw_dev. If value is larger than MLXFW_FSM_STATE_ERR_MAX, return "unknown error" as expected instead of reading an address than exceed array size. Fixes: 410ed13c ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Roi Dayan 提交于
[ Upstream commit 75102121 ] Before this commit the ndo always returned success. Fix that. Fixes: 1ab2068a ("net/mlx5: Implement vports admin state backup/restore") Signed-off-by: NRoi Dayan <roid@mellanox.com> Reviewed-by: NVlad Buslov <vladbu@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Martin Habets 提交于
[ Upstream commit 723eb536 ] The workqueue only exists for the primary PF. For other functions we hit a WARN_ON in kernel/workqueue.c. Fixes: 7c236c43 ("sfc: Add support for IEEE-1588 PTP") Signed-off-by: NMartin Habets <mhabets@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Tariq Toukan 提交于
[ Upstream commit 2744bf42 ] XDP_TX rings should not be limited by max_num_tx_rings_p_up. To make sure total number of TX rings never exceed MAX_TX_RINGS, add similar check in mlx4_en_alloc_tx_queue_per_tc(), where a new value is assigned for num_up. Fixes: 7e1dc5e9 ("net/mlx4_en: Limit the number of TX rings") Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Luigi Rizzo 提交于
[ Upstream commit 34e59836 ] ethtool expects ETHTOOL_GRXCLSRLALL to set ethtool_rxnfc->data with the total number of entries in the rx classifier table. Surprisingly, mlx4 is missing this part (in principle ethtool could still move forward and try the insert). Tested: compiled and run command: phh13:~# ethtool -N eth1 flow-type udp4 queue 4 Added rule with ID 255 Signed-off-by: NLuigi Rizzo <lrizzo@google.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Petr Machata 提交于
[ Upstream commit 1fc16577 ] The helper mlxsw_sp_ipip_dev_ul_tb_id() determines the underlay VRF of a GRE tunnel. For a tunnel without a bound device, it uses the same VRF that the tunnel is in. However in Linux, a GRE tunnel without a bound device uses the main VRF as the underlay. Fix the function accordingly. mlxsw further assumed that moving a tunnel to a different VRF could cause conflict in local tunnel endpoint address, which cannot be offloaded. However, the only way that an underlay could be changed by moving the tunnel device itself is if the tunnel device does not have a bound device. But in that case the underlay is always the main VRF, so there is no opportunity to introduce a conflict by moving such device. Thus this check constitutes a dead code, and can be removed, which do. Fixes: 6ddb7426 ("mlxsw: spectrum_router: Introduce loopback RIFs") Signed-off-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Ido Schimmel 提交于
[ Upstream commit 5050f6ae ] VxLAN FDB updates are sent with the VxLAN device which is not our upper and will therefore be ignored by current code. Solve this by checking whether the upper device (bridge) is our upper. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Reviewed-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Vasundhara Volam 提交于
[ Upstream commit 3a1d52a5 ] Return proper error code when Firmware returns HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED for HWRM_NVM_GET/SET_VARIABLE commands. Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Nathan Chancellor 提交于
[ Upstream commit 8fa74e3c ] Clang warns when one enumerated type is implicitly converted to another. drivers/net/ethernet/qlogic/qed/qed_ll2.c:799:32: warning: implicit conversion from enumeration type 'enum core_tx_dest' to different enumeration type 'enum qed_ll2_tx_dest' [-Wenum-conversion] tx_pkt.tx_dest = p_ll2_conn->tx_dest; ~ ~~~~~~~~~~~~^~~~~~~ 1 warning generated. Fix this by using a switch statement to convert between the enumerated values since they are not 1 to 1, which matches how the rest of the driver handles this conversion. Link: https://github.com/ClangBuiltLinux/linux/issues/125Suggested-by: NTomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Acked-by: NTomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Radoslaw Tyl 提交于
[ Upstream commit 5d826d20 ] This patch fix crash when we have restore flow director filters after reset adapter. In ixgbe_fdir_filter_restore() filter->action is outside of the rx_ring array, as it has a VF identifier in the upper 32 bits. Signed-off-by: NRadoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Nathan Chancellor 提交于
[ Upstream commit 43ade6ad ] Clang warns when one enumerated type is converted implicitly to another. drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4214:42: warning: implicit conversion from enumeration type 'enum i40e_aq_link_speed' to different enumeration type 'enum virtchnl_link_speed' [-Wenum-conversion] pfe.event_data.link_event.link_speed = I40E_LINK_SPEED_40GB; ~ ^~~~~~~~~~~~~~~~~~~~ 1 warning generated. Use the proper enum from virtchnl_link_speed, which has the same value as I40E_LINK_SPEED_40GB, VIRTCHNL_LINK_SPEED_40GB. This appears to be missed by commit ff3f4cc2 ("virtchnl: finish conversion to virtchnl interface"). Link: https://github.com/ClangBuiltLinux/linux/issues/81Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Radoslaw Tyl 提交于
[ Upstream commit 8d7179b1 ] We have Tx hang when number Tx and XDP queues are more than 64. In XDP always is MTQC == 0x0 (64TxQs). We need more space for Tx queues. Signed-off-by: NRadoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Anirudh Venkataramanan 提交于
[ Upstream commit be8ff000 ] When adding a rule, queue region size needs to be provided as log base 2 of the number of queues in region. Fix that. Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Nathan Chancellor 提交于
[ Upstream commit 258b6d14 ] Clang warns when one enumerated type is implicitly converted to another. drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:390:4: warning: implicit conversion from enumeration type 'enum cxgb4_dcb_state' to different enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion] IEEE_FAUX_SYNC(dev, dcb); ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h:70:10: note: expanded from macro 'IEEE_FAUX_SYNC' CXGB4_DCB_STATE_FW_ALLSYNCED); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ Use the equivalent value of the expected type to silence Clang while resulting in no functional change. CXGB4_DCB_STATE_FW_ALLSYNCED = CXGB4_DCB_INPUT_FW_ALLSYNCED = 3 Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Reviewed-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Nathan Chancellor 提交于
[ Upstream commit 3b0b8f0d ] Clang warns when one enumerated type is implicitly converted to another. drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:303:7: warning: implicit conversion from enumeration type 'enum cxgb4_dcb_state' to different enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion] ? CXGB4_DCB_STATE_FW_ALLSYNCED ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:304:7: warning: implicit conversion from enumeration type 'enum cxgb4_dcb_state' to different enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion] : CXGB4_DCB_STATE_FW_INCOMPLETE); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2 warnings generated. Use the equivalent value of the expected type to silence Clang while resulting in no functional change. CXGB4_DCB_STATE_FW_INCOMPLETE = CXGB4_DCB_INPUT_FW_INCOMPLETE = 2 CXGB4_DCB_STATE_FW_ALLSYNCED = CXGB4_DCB_INPUT_FW_ALLSYNCED = 3 Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Reviewed-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 YueHaibing 提交于
[ Upstream commit 0a715156 ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 YueHaibing 提交于
[ Upstream commit 6323d57f ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Petr Machata 提交于
[ Upstream commit 12ba7e10 ] Up until now, mlxsw tolerated firmware versions that weren't exactly matching the required version, if the branch number matched. That allowed the users to test various firmware versions as long as they were on the right branch. On the other hand, it made it impossible for mlxsw to put a hard lower bound on a version that fixes all problems known to date. If a user had a somewhat older FW version installed, mlxsw would start up just fine, possibly performing non-optimally as it would use features that trigger problematic behavior. Therefore tweak the check to accept any FW version that is: - on the same branch as the preferred version, and - the same as or newer than the preferred version. Signed-off-by: NPetr Machata <petrm@mellanox.com> Reviewed-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 YueHaibing 提交于
[ Upstream commit 06983aa5 ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 YueHaibing 提交于
[ Upstream commit 2b49117a ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Shahed Shaikh 提交于
[ Upstream commit 75a110a1 ] This is a workaround for FW bug - MFW generates bandwidth attention in single function mode, which is only expected to be generated in multi function mode. This undesired attention in SF mode results in incorrect HW configuration and resulting into Tx timeout. Signed-off-by: NShahed Shaikh <Shahed.Shaikh@cavium.com> Signed-off-by: NAriel Elior <ariel.elior@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Petr Machata 提交于
[ Upstream commit a9f36656 ] With introduction of MC-aware mode to mlxsw, it became necessary to configure TCs above 7 as well. There is now code in mlxsw to disable ETS for these higher classes, but disablement of max shaper was neglected. By default, max shaper is currently disabled to begin with, so the problem is just cosmetic. However, for symmetry, do like we do for ETS configuration, and call mlxsw_sp_port_ets_maxrate_set() for both TC i and i + 8. Signed-off-by: NPetr Machata <petrm@mellanox.com> Reviewed-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Jakub Kicinski 提交于
[ Upstream commit 23d9f553 ] NFP supports fairly enormous ring sizes (up to 256k descriptors). In commit 46627170 ("nfp: use kvcalloc() to allocate SW buffer descriptor arrays") we have started using kvcalloc() functions to make sure the allocation of software state arrays doesn't hit the MAX_ORDER limit. Unfortunately, we can't use virtual mappings for the DMA region holding HW descriptors. In case this allocation fails instead of the generic (and fairly scary) warning/splat in the logs print a helpful message explaining what happened and suggesting how to fix it. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 YueHaibing 提交于
[ Upstream commit 0e0cc31f ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Acked-by: NShannon Nelson <shannon.nelson@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 YueHaibing 提交于
[ Upstream commit fe72352e ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 YueHaibing 提交于
[ Upstream commit 0c13b8d1 ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 YueHaibing 提交于
[ Upstream commit 81255af8 ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 YueHaibing 提交于
[ Upstream commit bacade82 ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 YueHaibing 提交于
[ Upstream commit f03508ce ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Antoine Tenart 提交于
[ Upstream commit 70afb58e ] The Marvell PPv2.2 engine only has 8 Rx queues per CPU, while PPv2.1 has 16 of them. This patch updates the code so that the Rx queues mask width is selected given the version of the network controller used. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 YueHaibing 提交于
[ Upstream commit 94b2bb28 ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 YueHaibing 提交于
[ Upstream commit ac1172de ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-