virtchnl: finish conversion to virtchnl interface

This patch implements the complete version of the virtchnl.h file
with final renames, and fixes the related code in i40e and i40evf.

It also expands comments, and adds details on the usage of
certain fields.

In addition, due to the changes a couple of casts are needed
to prevent errors found by sparse after renaming some fields.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c

@@ -77,7 +77,7 @@ static void i40e_vc_notify_vf_link_state(struct i40e_vf *vf)
 	int abs_vf_id = vf->vf_id + (int)hw->func_caps.vf_base_id;
 
 	pfe.event = VIRTCHNL_EVENT_LINK_CHANGE;
-	pfe.severity = I40E_PF_EVENT_SEVERITY_INFO;
+	pfe.severity = PF_EVENT_SEVERITY_INFO;
 	if (vf->link_forced) {
 		pfe.event_data.link_event.link_status = vf->link_up;
 		pfe.event_data.link_event.link_speed =
@@ -85,7 +85,8 @@ static void i40e_vc_notify_vf_link_state(struct i40e_vf *vf)
 	} else {
 		pfe.event_data.link_event.link_status =
 			ls->link_info & I40E_AQ_LINK_UP;
-		pfe.event_data.link_event.link_speed = ls->link_speed;
+		pfe.event_data.link_event.link_speed =
+			(enum virtchnl_link_speed)ls->link_speed;
 	}
 	i40e_aq_send_msg_to_vf(hw, abs_vf_id, VIRTCHNL_OP_EVENT,
 			       0, (u8 *)&pfe, sizeof(pfe), NULL);
@@ -116,7 +117,7 @@ void i40e_vc_notify_reset(struct i40e_pf *pf)
 	struct virtchnl_pf_event pfe;
 
 	pfe.event = VIRTCHNL_EVENT_RESET_IMPENDING;
-	pfe.severity = I40E_PF_EVENT_SEVERITY_CERTAIN_DOOM;
+	pfe.severity = PF_EVENT_SEVERITY_CERTAIN_DOOM;
 	i40e_vc_vf_broadcast(pf, VIRTCHNL_OP_EVENT, 0,
 			     (u8 *)&pfe, sizeof(struct virtchnl_pf_event));
 }
@@ -144,7 +145,7 @@ void i40e_vc_notify_vf_reset(struct i40e_vf *vf)
 	abs_vf_id = vf->vf_id + (int)vf->pf->hw.func_caps.vf_base_id;
 
 	pfe.event = VIRTCHNL_EVENT_RESET_IMPENDING;
-	pfe.severity = I40E_PF_EVENT_SEVERITY_CERTAIN_DOOM;
+	pfe.severity = PF_EVENT_SEVERITY_CERTAIN_DOOM;
 	i40e_aq_send_msg_to_vf(&vf->pf->hw, abs_vf_id, VIRTCHNL_OP_EVENT,
 			       0, (u8 *)&pfe,
 			       sizeof(struct virtchnl_pf_event), NULL);
@@ -1586,7 +1587,7 @@ static int i40e_vc_get_vf_resources_msg(struct i40e_vf *vf, u8 *msg)
 
 	if (vf->lan_vsi_idx) {
 		vfres->vsi_res[0].vsi_id = vf->lan_vsi_id;
-		vfres->vsi_res[0].vsi_type = I40E_VSI_SRIOV;
+		vfres->vsi_res[0].vsi_type = VIRTCHNL_VSI_SRIOV;
 		vfres->vsi_res[0].num_queue_pairs = vsi->alloc_queue_pairs;
 		/* VFs only use TC 0 */
 		vfres->vsi_res[0].qset_handle
@@ -1680,7 +1681,7 @@ static int i40e_vc_config_promiscuous_mode_msg(struct i40e_vf *vf,
 		goto error_param;
 	}
 	/* Multicast promiscuous handling*/
-	if (info->flags & I40E_FLAG_VF_MULTICAST_PROMISC)
+	if (info->flags & FLAG_VF_MULTICAST_PROMISC)
 		allmulti = true;
 
 	if (vf->port_vlan_id) {
@@ -1731,7 +1732,7 @@ static int i40e_vc_config_promiscuous_mode_msg(struct i40e_vf *vf,
 			clear_bit(I40E_VF_STATE_MC_PROMISC, &vf->vf_states);
 	}
 
-	if (info->flags & I40E_FLAG_VF_UNICAST_PROMISC)
+	if (info->flags & FLAG_VF_UNICAST_PROMISC)
 		alluni = true;
 	if (vf->port_vlan_id) {
 		aq_ret = i40e_aq_set_vsi_uc_promisc_on_vlan(hw, vsi->seid,
@@ -3241,7 +3242,7 @@ int i40e_ndo_set_vf_link_state(struct net_device *netdev, int vf_id, int link)
 	abs_vf_id = vf->vf_id + hw->func_caps.vf_base_id;
 
 	pfe.event = VIRTCHNL_EVENT_LINK_CHANGE;
-	pfe.severity = I40E_PF_EVENT_SEVERITY_INFO;
+	pfe.severity = PF_EVENT_SEVERITY_INFO;
 
 	switch (link) {
 	case IFLA_VF_LINK_STATE_AUTO:
@@ -3249,6 +3250,7 @@ int i40e_ndo_set_vf_link_state(struct net_device *netdev, int vf_id, int link)
 		pfe.event_data.link_event.link_status =
 			pf->hw.phy.link_info.link_info & I40E_AQ_LINK_UP;
 		pfe.event_data.link_event.link_speed =
+			(enum virtchnl_link_speed)
 			pf->hw.phy.link_info.link_speed;
 		break;
 	case IFLA_VF_LINK_STATE_ENABLE:

drivers/net/ethernet/intel/i40evf/i40e_common.c

@@ -1107,7 +1107,7 @@ void i40e_vf_parse_hw_config(struct i40e_hw *hw,
 			   VIRTCHNL_VF_OFFLOAD_L2;
 	hw->dev_caps.fcoe = 0;
 	for (i = 0; i < msg->num_vsis; i++) {
-		if (vsi_res->vsi_type == I40E_VSI_SRIOV) {
+		if (vsi_res->vsi_type == VIRTCHNL_VSI_SRIOV) {
 			ether_addr_copy(hw->mac.perm_addr,
 					vsi_res->default_mac_addr);
 			ether_addr_copy(hw->mac.addr,

drivers/net/ethernet/intel/i40evf/i40evf.h

@@ -263,7 +263,7 @@ struct i40evf_adapter {
 	struct work_struct watchdog_task;
 	bool netdev_registered;
 	bool link_up;
-	enum i40e_aq_link_speed link_speed;
+	enum virtchnl_link_speed link_speed;
 	enum virtchnl_ops current_op;
 #define CLIENT_ALLOWED(_a) ((_a)->vf_res ? \
 			    (_a)->vf_res->vf_offload_flags & \

drivers/net/ethernet/intel/i40evf/i40evf_main.c

@@ -1707,13 +1707,13 @@ static void i40evf_watchdog_task(struct work_struct *work)
 	}
 
 	if (adapter->aq_required & I40EVF_FLAG_AQ_REQUEST_PROMISC) {
-		i40evf_set_promiscuous(adapter, I40E_FLAG_VF_UNICAST_PROMISC |
-				       I40E_FLAG_VF_MULTICAST_PROMISC);
+		i40evf_set_promiscuous(adapter, FLAG_VF_UNICAST_PROMISC |
+				       FLAG_VF_MULTICAST_PROMISC);
 		goto watchdog_done;
 	}
 
 	if (adapter->aq_required & I40EVF_FLAG_AQ_REQUEST_ALLMULTI) {
-		i40evf_set_promiscuous(adapter, I40E_FLAG_VF_MULTICAST_PROMISC);
+		i40evf_set_promiscuous(adapter, FLAG_VF_MULTICAST_PROMISC);
 		goto watchdog_done;
 	}
 
@@ -1969,7 +1969,8 @@ static void i40evf_adminq_task(struct work_struct *work)
 			break; /* No event to process or error cleaning ARQ */
 
 		i40evf_virtchnl_completion(adapter, v_msg->v_opcode,
-					   v_msg->v_retval, event.msg_buf,
+					   (i40e_status)v_msg->v_retval,
+					   event.msg_buf,
 					   event.msg_len);
 		if (pending != 0)
 			memset(event.msg_buf, 0, I40EVF_MAX_AQ_BUF_SIZE);
@@ -2410,7 +2411,7 @@ int i40evf_process_config(struct i40evf_adapter *adapter)
 
 	/* got VF config message back from PF, now we can parse it */
 	for (i = 0; i < vfres->num_vsis; i++) {
-		if (vfres->vsi_res[i].vsi_type == I40E_VSI_SRIOV)
+		if (vfres->vsi_res[i].vsi_type == VIRTCHNL_VSI_SRIOV)
 			adapter->vsi_res = &vfres->vsi_res[i];
 	}
 	if (!adapter->vsi_res) {

drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c

@@ -662,15 +662,15 @@ void i40evf_set_promiscuous(struct i40evf_adapter *adapter, int flags)
 		return;
 	}
 
-	promisc_all = I40E_FLAG_VF_UNICAST_PROMISC |
-		      I40E_FLAG_VF_MULTICAST_PROMISC;
+	promisc_all = FLAG_VF_UNICAST_PROMISC |
+		      FLAG_VF_MULTICAST_PROMISC;
 	if ((flags & promisc_all) == promisc_all) {
 		adapter->flags |= I40EVF_FLAG_PROMISC_ON;
 		adapter->aq_required &= ~I40EVF_FLAG_AQ_REQUEST_PROMISC;
 		dev_info(&adapter->pdev->dev, "Entering promiscuous mode\n");
 	}
 
-	if (flags & I40E_FLAG_VF_MULTICAST_PROMISC) {
+	if (flags & FLAG_VF_MULTICAST_PROMISC) {
 		adapter->flags |= I40EVF_FLAG_ALLMULTI_ON;
 		adapter->aq_required &= ~I40EVF_FLAG_AQ_REQUEST_ALLMULTI;
 		dev_info(&adapter->pdev->dev, "Entering multicast promiscuous mode\n");

include/linux/avf/virtchnl.h

@@ -29,28 +29,29 @@
 
 /* Description:
  * This header file describes the VF-PF communication protocol used
- * by the various i40e drivers.
+ * by the drivers for all devices starting from our 40G product line
  *
  * Admin queue buffer usage:
- * desc->opcode is always i40e_aqc_opc_send_msg_to_pf
+ * desc->opcode is always aqc_opc_send_msg_to_pf
  * flags, retval, datalen, and data addr are all used normally.
- * Firmware copies the cookie fields when sending messages between the PF and
- * VF, but uses all other fields internally. Due to this limitation, we
- * must send all messages as "indirect", i.e. using an external buffer.
+ * The Firmware copies the cookie fields when sending messages between the
+ * PF and VF, but uses all other fields internally. Due to this limitation,
+ * we must send all messages as "indirect", i.e. using an external buffer.
  *
- * All the vsi indexes are relative to the VF. Each VF can have maximum of
+ * All the VSI indexes are relative to the VF. Each VF can have maximum of
  * three VSIs. All the queue indexes are relative to the VSI.  Each VF can
  * have a maximum of sixteen queues for all of its VSIs.
  *
  * The PF is required to return a status code in v_retval for all messages
- * except RESET_VF, which does not require any response. The return value is of
- * i40e_status_code type, defined in the i40e_type.h.
+ * except RESET_VF, which does not require any response. The return value
+ * is of status_code type, defined in the shared type.h.
  *
- * In general, VF driver initialization should roughly follow the order of these
- * opcodes. The VF driver must first validate the API version of the PF driver,
- * then request a reset, then get resources, then configure queues and
- * interrupts. After these operations are complete, the VF driver may start
- * its queues, optionally add MAC and VLAN filters, and process traffic.
+ * In general, VF driver initialization should roughly follow the order of
+ * these opcodes. The VF driver must first validate the API version of the
+ * PF driver, then request a reset, then get resources, then configure
+ * queues and interrupts. After these operations are complete, the VF
+ * driver may start its queues, optionally add MAC and VLAN filters, and
+ * process traffic.
  */
 
 /* START GENERIC DEFINES
@@ -68,6 +69,33 @@ enum virtchnl_status_code {
 	VIRTCHNL_STATUS_NOT_SUPPORTED			= -64,
 };
 
+#define VIRTCHNL_LINK_SPEED_100MB_SHIFT		0x1
+#define VIRTCHNL_LINK_SPEED_1000MB_SHIFT	0x2
+#define VIRTCHNL_LINK_SPEED_10GB_SHIFT		0x3
+#define VIRTCHNL_LINK_SPEED_40GB_SHIFT		0x4
+#define VIRTCHNL_LINK_SPEED_20GB_SHIFT		0x5
+#define VIRTCHNL_LINK_SPEED_25GB_SHIFT		0x6
+
+enum virtchnl_link_speed {
+	VIRTCHNL_LINK_SPEED_UNKNOWN	= 0,
+	VIRTCHNL_LINK_SPEED_100MB	= BIT(VIRTCHNL_LINK_SPEED_100MB_SHIFT),
+	VIRTCHNL_LINK_SPEED_1GB		= BIT(VIRTCHNL_LINK_SPEED_1000MB_SHIFT),
+	VIRTCHNL_LINK_SPEED_10GB	= BIT(VIRTCHNL_LINK_SPEED_10GB_SHIFT),
+	VIRTCHNL_LINK_SPEED_40GB	= BIT(VIRTCHNL_LINK_SPEED_40GB_SHIFT),
+	VIRTCHNL_LINK_SPEED_20GB	= BIT(VIRTCHNL_LINK_SPEED_20GB_SHIFT),
+	VIRTCHNL_LINK_SPEED_25GB	= BIT(VIRTCHNL_LINK_SPEED_25GB_SHIFT),
+};
+
+/* for hsplit_0 field of Rx HMC context */
+/* deprecated with AVF 1.0 */
+enum virtchnl_rx_hsplit {
+	VIRTCHNL_RX_HSPLIT_NO_SPLIT      = 0,
+	VIRTCHNL_RX_HSPLIT_SPLIT_L2      = 1,
+	VIRTCHNL_RX_HSPLIT_SPLIT_IP      = 2,
+	VIRTCHNL_RX_HSPLIT_SPLIT_TCP_UDP = 4,
+	VIRTCHNL_RX_HSPLIT_SPLIT_SCTP    = 8,
+};
+
 /* END GENERIC DEFINES */
 
 /* Opcodes for VF-PF communication. These are placed in the v_opcode field
@@ -77,6 +105,8 @@ enum virtchnl_ops {
 /* The PF sends status change events to VFs using
  * the VIRTCHNL_OP_EVENT opcode.
  * VFs send requests to the PF using the other ops.
+ * Use of "advanced opcode" features must be negotiated as part of capabilities
+ * exchange and are not considered part of base mode feature set.
  */
 	VIRTCHNL_OP_UNKNOWN = 0,
 	VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */
@@ -96,14 +126,13 @@ enum virtchnl_ops {
 	VIRTCHNL_OP_GET_STATS = 15,
 	VIRTCHNL_OP_RSVD = 16,
 	VIRTCHNL_OP_EVENT = 17, /* must ALWAYS be 17 */
-	VIRTCHNL_OP_IWARP = 20,
-	VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP = 21,
-	VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP = 22,
+	VIRTCHNL_OP_IWARP = 20, /* advanced opcode */
+	VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP = 21, /* advanced opcode */
+	VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP = 22, /* advanced opcode */
 	VIRTCHNL_OP_CONFIG_RSS_KEY = 23,
 	VIRTCHNL_OP_CONFIG_RSS_LUT = 24,
 	VIRTCHNL_OP_GET_RSS_HENA_CAPS = 25,
 	VIRTCHNL_OP_SET_RSS_HENA = 26,
-
 };
 
 /* Virtual channel message descriptor. This overlays the admin queue
@@ -113,7 +142,7 @@ enum virtchnl_ops {
 struct virtchnl_msg {
 	u8 pad[8];			 /* AQ flags/opcode/len/retval fields */
 	enum virtchnl_ops v_opcode; /* avoid confusion with desc->opcode */
-	i40e_status v_retval;  /* ditto for desc->retval */
+	enum virtchnl_status_code v_retval;  /* ditto for desc->retval */
 	u32 vfid;			 /* used by PF when sending to VF */
 };
 
@@ -155,6 +184,15 @@ struct virtchnl_version_info {
  * are cleared.
  */
 
+/* VSI types that use VIRTCHNL interface for VF-PF communication. VSI_SRIOV
+ * vsi_type should always be 6 for backward compatibility. Add other fields
+ * as needed.
+ */
+enum virtchnl_vsi_type {
+	VIRTCHNL_VSI_TYPE_INVALID = 0,
+	VIRTCHNL_VSI_SRIOV = 6,
+};
+
 /* VIRTCHNL_OP_GET_VF_RESOURCES
  * Version 1.0 VF sends this request to PF with no parameters
  * Version 1.1 VF sends this request to PF with u32 bitmap of its capabilities
@@ -166,14 +204,18 @@ struct virtchnl_version_info {
 struct virtchnl_vsi_resource {
 	u16 vsi_id;
 	u16 num_queue_pairs;
-	enum i40e_vsi_type vsi_type;
+	enum virtchnl_vsi_type vsi_type;
 	u16 qset_handle;
 	u8 default_mac_addr[ETH_ALEN];
 };
-/* VF offload flags */
-#define VIRTCHNL_VF_OFFLOAD_L2		0x00000001
+
+/* VF offload flags
+ * VIRTCHNL_VF_OFFLOAD_L2 flag is inclusive of base mode L2 offloads including
+ * TX/RX Checksum offloading and TSO for non-tunnelled packets.
+ */
+#define VIRTCHNL_VF_OFFLOAD_L2			0x00000001
 #define VIRTCHNL_VF_OFFLOAD_IWARP		0x00000002
-#define VIRTCHNL_VF_OFFLOAD_FCOE		0x00000004
+#define VIRTCHNL_VF_OFFLOAD_RSVD		0x00000004
 #define VIRTCHNL_VF_OFFLOAD_RSS_AQ		0x00000008
 #define VIRTCHNL_VF_OFFLOAD_RSS_REG		0x00000010
 #define VIRTCHNL_VF_OFFLOAD_WB_ON_ITR		0x00000020
@@ -182,11 +224,12 @@ struct virtchnl_vsi_resource {
 #define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2	0x00040000
 #define VIRTCHNL_VF_OFFLOAD_RSS_PF		0X00080000
 #define VIRTCHNL_VF_OFFLOAD_ENCAP		0X00100000
-#define VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM	0X00200000
+#define VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM		0X00200000
+#define VIRTCHNL_VF_OFFLOAD_RX_ENCAP_CSUM	0X00400000
 
-#define I40E_VF_BASE_MODE_OFFLOADS (VIRTCHNL_VF_OFFLOAD_L2 | \
-				    VIRTCHNL_VF_OFFLOAD_VLAN | \
-				    VIRTCHNL_VF_OFFLOAD_RSS_PF)
+#define VF_BASE_MODE_OFFLOADS (VIRTCHNL_VF_OFFLOAD_L2 | \
+			       VIRTCHNL_VF_OFFLOAD_VLAN | \
+			       VIRTCHNL_VF_OFFLOAD_RSS_PF)
 
 struct virtchnl_vf_resource {
 	u16 num_vsis;
@@ -212,9 +255,9 @@ struct virtchnl_txq_info {
 	u16 vsi_id;
 	u16 queue_id;
 	u16 ring_len;		/* number of descriptors, multiple of 8 */
-	u16 headwb_enabled;
+	u16 headwb_enabled; /* deprecated with AVF 1.0 */
 	u64 dma_ring_addr;
-	u64 dma_headwb_addr;
+	u64 dma_headwb_addr; /* deprecated with AVF 1.0 */
 };
 
 /* VIRTCHNL_OP_CONFIG_RX_QUEUE
@@ -229,11 +272,11 @@ struct virtchnl_rxq_info {
 	u16 queue_id;
 	u32 ring_len;		/* number of descriptors, multiple of 32 */
 	u16 hdr_size;
-	u16 splithdr_enabled;
+	u16 splithdr_enabled; /* deprecated with AVF 1.0 */
 	u32 databuffer_size;
 	u32 max_pkt_size;
 	u64 dma_ring_addr;
-	enum i40e_hmc_obj_rx_hsplit_0 rx_split_pos;
+	enum virtchnl_rx_hsplit rx_split_pos; /* deprecated with AVF 1.0 */
 };
 
 /* VIRTCHNL_OP_CONFIG_VSI_QUEUES
@@ -344,15 +387,15 @@ struct virtchnl_promisc_info {
 	u16 flags;
 };
 
-#define I40E_FLAG_VF_UNICAST_PROMISC	0x00000001
-#define I40E_FLAG_VF_MULTICAST_PROMISC	0x00000002
+#define FLAG_VF_UNICAST_PROMISC	0x00000001
+#define FLAG_VF_MULTICAST_PROMISC	0x00000002
 
 /* VIRTCHNL_OP_GET_STATS
  * VF sends this message to request stats for the selected VSI. VF uses
  * the virtchnl_queue_select struct to specify the VSI. The queue_id
  * field is ignored by the PF.
  *
- * PF replies with struct i40e_eth_stats in an external buffer.
+ * PF replies with struct eth_stats in an external buffer.
  */
 
 /* VIRTCHNL_OP_CONFIG_RSS_KEY
@@ -382,7 +425,6 @@ struct virtchnl_rss_lut {
  * By default, the PF sets these to all possible traffic types that the
  * hardware supports. The VF can query this value if it wants to change the
  * traffic types that are hashed by the hardware.
- * Traffic types are defined in the i40e_filter_pctype enum in i40e_type.h
  */
 struct virtchnl_rss_hena {
 	u64 hena;
@@ -399,14 +441,15 @@ enum virtchnl_event_codes {
 	VIRTCHNL_EVENT_RESET_IMPENDING,
 	VIRTCHNL_EVENT_PF_DRIVER_CLOSE,
 };
-#define I40E_PF_EVENT_SEVERITY_INFO		0
-#define I40E_PF_EVENT_SEVERITY_CERTAIN_DOOM	255
+
+#define PF_EVENT_SEVERITY_INFO		0
+#define PF_EVENT_SEVERITY_CERTAIN_DOOM	255
 
 struct virtchnl_pf_event {
 	enum virtchnl_event_codes event;
 	union {
 		struct {
-			enum i40e_aq_link_speed link_speed;
+			enum virtchnl_link_speed link_speed;
 			bool link_status;
 		} link_event;
 	} event_data;
@@ -426,13 +469,6 @@ struct virtchnl_pf_event {
  * PF configures interrupt mapping and returns status.
  */
 
-/* HW does not define a type value for AEQ; only for RX/TX and CEQ.
- * In order for us to keep the interface simple, SW will define a
- * unique type value for AEQ.
- */
-#define I40E_QUEUE_TYPE_PE_AEQ  0x80
-#define I40E_QUEUE_INVALID_IDX  0xFFFF
-
 struct virtchnl_iwarp_qv_info {
 	u32 v_idx; /* msix_vector */
 	u16 ceq_idx;
@@ -446,8 +482,7 @@ struct virtchnl_iwarp_qvlist_info {
 };
 
 /* VF reset states - these are written into the RSTAT register:
- * I40E_VFGEN_RSTAT1 on the PF
- * I40E_VFGEN_RSTAT on the VF
+ * VFGEN_RSTAT on the VF
  * When the PF initiates a reset, it writes 0
  * When the reset is complete, it writes 1
  * When the PF detects that the VF has recovered, it writes 2
@@ -461,7 +496,6 @@ enum virtchnl_vfr_states {
 	VIRTCHNL_VFR_INPROGRESS = 0,
 	VIRTCHNL_VFR_COMPLETED,
 	VIRTCHNL_VFR_VFACTIVE,
-	VIRTCHNL_VFR_UNKNOWN,
 };
 
 #endif /* _VIRTCHNL_H_ */