- 15 1月, 2019 1 次提交
-
-
由 Ken Chalmers 提交于
[Why] Users would like more accurate pixel clocks, especially for fractional "TV" frame rates like 59.94 Hz. [How] Store and communicate pixel clocks with 100 Hz accuracy from dc_crtc_timing through to BIOS command table setpixelclock call. Signed-off-by: NKen Chalmers <ken.chalmers@amd.com> Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 01 12月, 2018 1 次提交
-
-
由 Harmanprit Tatla 提交于
* Use provided infopacket in stream (if valid) instead of reconstructing in set_vendor_info_packet() * Use proper format for enums * Use dc info packet struct instead Signed-off-by: NHarmanprit Tatla <Harmanprit.Tatla@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Acked-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 06 11月, 2018 1 次提交
-
-
由 Harmanprit Tatla 提交于
[Why] Current render margin time is not sufficient to compute exit frame time for most monitors. [How] Declared render margin in FPS to compute a exit frame rate that is 4 FPS above the minimum FPS required to engage FreeSync. Also did code clean-up to remove redundancies. Signed-off-by: NHarmanprit Tatla <htatla@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 27 9月, 2018 1 次提交
-
-
由 SivapiriyanKumarasamy 提交于
Parse the native color bit and send it to freesync module for future use Signed-off-by: NSivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 28 8月, 2018 9 次提交
-
-
由 Anthony Koo 提交于
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com> Reviewed-by: NAric Cyr <Aric.Cyr@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Anthony Koo 提交于
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com> Reviewed-by: NAric Cyr <Aric.Cyr@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Anthony Koo 提交于
We only need to register once OS calls the interrupt control. Also, if we are entering static screen mode, disable after ramping is done. Disable shall be done via timer of 2 seconds regardless of ramping complete or not, just to simplify. Also, ramp to mid instead of min, due to better flicker performance... Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com> Reviewed-by: NAric Cyr <Aric.Cyr@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Anthony Koo 提交于
Tearing occurred because new VTOTAL MIN/MAX was being programmed too early. The flip can happen within the VUPDATE high region, and the new min/max would take effect immediately. But this means that frame is not variable anymore, and tearing would occur when the flip actually happens. The fixed insert duration should be programmed on the first VUPDATE interrupt instead. Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com> Reviewed-by: NAric Cyr <Aric.Cyr@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Anthony Koo 提交于
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com> Reviewed-by: NAric Cyr <Aric.Cyr@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Anthony Koo 提交于
Ignore MSA bit on DP display is usually set during SetTimings, but there was a case where the module thought refresh rate was not valid and ignore MSA bit was not set. Later, a valid refresh rate range was requested but since ignore MSA bit not set, it caused black screen. Issue if with how the module checked for VRR support. Fix up that logic. DM should call new valid_range function to determine if timing is supported. Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com> Reviewed-by: NAric Cyr <Aric.Cyr@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Anthony Koo 提交于
This issue occurs if refresh rate range is very small and lfc is not used. When frame spikes occur, refresh rate becomes fixed and will not restore properly Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com> Reviewed-by: NAric Cyr <Aric.Cyr@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Anthony Koo 提交于
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com> Reviewed-by: NAric Cyr <Aric.Cyr@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Anthony Koo 提交于
Remove dependency on internal sink map and instead use existing stream and plane state Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com> Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 13 6月, 2018 1 次提交
-
-
由 Kees Cook 提交于
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 15 3月, 2018 2 次提交
-
-
由 Samson Tam 提交于
Signed-off-by: NSamson Tam <Samson.Tam@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Anthony Koo 提交于
Stats will be used for debug purposes Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 07 12月, 2017 1 次提交
-
-
由 Harry Wentland 提交于
There's no need to have this as a vtable. The vtable was initially used for stream_adjust_vmin_vmax but the condition checked here (set_drr) is always true, hence we don't need to assign this dynamically anymore. Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 29 9月, 2017 1 次提交
-
-
由 Harry Wentland 提交于
Abstractions are frowned upon. cocci script: virtual context virtual patch virtual org virtual report @@ expression ptr; @@ - dm_alloc(ptr) + kzalloc(ptr, GFP_KERNEL) @@ expression ptr, size; @@ - dm_realloc(ptr, size) + krealloc(ptr, size, GFP_KERNEL) @@ expression ptr; @@ - dm_free(ptr) + kfree(ptr) v2: use GFP_KERNEL, not GFP_ATOMIC. add cocci script Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 27 9月, 2017 22 次提交
-
-
由 Bhawanpreet Lakha 提交于
Clean up some code related to flattening core_dc commit (Remove redundent dc = dc, which was the result of removing DC_TO_CORE() macro) Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Bhawanpreet Lakha 提交于
-Flattening core_dc to dc Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Harry Wentland 提交于
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \ -o -name "*.cpp" -o -name "*.hpp" | \ xargs sed -i 's/struct dc_stream/struct dc_stream_state/g' find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \ -o -name "*.cpp" -o -name "*.hpp" | \ xargs sed -i 's/struct dc_stream_state_update/struct dc_stream_update/g' find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \ -o -name "*.cpp" -o -name "*.hpp" | \ xargs sed -i 's/struct dc_stream_state_status/struct dc_stream_status/g' Plus some manual changes Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Leo (Sunpeng) Li 提交于
Signed-off-by: NLeo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Anthony Koo 提交于
Also need to change default to off Signed-off-by: NAnthony Koo <anthony.koo@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Amy Zhang 提交于
- Make sure Vsync interrupts are disabled in static screen case and enabled when not to save power - Create no_static_for_external_dp debug option Signed-off-by: NAmy Zhang <Amy.Zhang@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Anthony Koo 提交于
Signed-off-by: NAnthony Koo <anthony.koo@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Anthony Koo 提交于
Reduce timer tick interval for the static screen Signed-off-by: NAnthony Koo <anthony.koo@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Amy Zhang 提交于
- Block PSR in Full screen apps to prevent incorrect static screen curser events - Reprogram static screen events when update freesync state - Program static ramp variable active after other values are programmed - Correct wrong assigning of the nominal and current vcount Signed-off-by: NAmy Zhang <Amy.Zhang@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Corbin McElhanney 提交于
Signed-off-by: NCorbin McElhanney <corbin.mcelhanney@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmytro Laktyushkin 提交于
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Harry Wentland 提交于
Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Cook 提交于
Signed-off-by: NEric <eric.cook@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Cook 提交于
-check for min/max range in freesync calculation and handle it accordingly Signed-off-by: NEric <eric.cook@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmytro Laktyushkin 提交于
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Cook 提交于
Implement core support to allow for FreeSync Auto Sweep to work Signed-off-by: NEric Cook <Eric.Cook@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Sylvia Tsai 提交于
- Refacotr PSR to follow correct module pattern - fix eDP only working on sink index 0. Signed-off-by: NSylvia Tsai <sylvia.tsai@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Yongqiang Sun 提交于
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Cook 提交于
- Update BTR/LFC logic so that V_TOTAL_MIN/MAX will take affect on current frame - Add in FreeSync update to MPO code path Signed-off-by: NEric Cook <Eric.Cook@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Charlene Liu 提交于
Signed-off-by: NCharlene Liu <charlene.liu@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Reviewed-by: NJordan Lazare <Jordan.Lazare@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Harry Wentland 提交于
Also make the code somewhat more readable. Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Sylvia Tsai 提交于
- Set ignore_msa_timing_param to 1 only for modes that can support freesync Signed-off-by: NSylvia Tsai <sylvia.tsai@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-