There is no need to perform an INV for each interrupt when updating
multiple interrupts.  Instead, we can rely on the final VINVALL that
gets sent to the ITS to do the work for all of them.
Acked-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Upon updating a property, we propagate it all the way to the physical
ITS, and ask for an INV command to be executed there.
Acked-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

The current implementation of MOVALL doesn't allow us to call
into the core ITS code as we hold a number of spinlocks.

Let's try a method used in other parts of the code, were we copy
the intids of the candicate interrupts, and then do whatever
we need to do with them outside of the critical section.

This allows us to move the interrupts one by one, at the expense
of a bit of CPU time. Who cares? MOVALL is such a stupid command
anyway...
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Handling CLEAR is pretty easy. Just ask the ITS driver to clear
the corresponding pending bit (which will turn into a CLEAR
command on the physical side).
Acked-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

When the guest issues an affinity change, we need to tell the physical
ITS that we're now targetting a new vcpu.  This is done by extracting
the current mapping, updating the target, and reapplying the mapping.
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

When freeing an LPI (on a DISCARD command, for example), we need
to unmap the VLPI down to the physical ITS level.
Acked-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

If the guest issues an INT command targetting a VLPI, let's
call into the irq_set_irqchip_state() helper to make it pending
on the physical side.

This works just as well if userspace decides to inject an interrupt
using the normal userspace API...
Acked-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

In order to control the GICv4 view of virtual CPUs, we rely
on an irqdomain allocated for that purpose. Let's add a couple
of helpers to that effect.

At the same time, the vgic data structures gain new fields to
track all this... erm... wonderful stuff.

The way we hook into the vgic init is slightly convoluted. We
need the vgic to be initialized (in order to guarantee that
the number of vcpus is now fixed), and we must have a vITS
(otherwise this is all very pointless). So we end-up calling
the init from both vgic_init and vgic_its_create.
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

In order to help integrating the vITS code with GICv4, let's add
a new helper that deals with updating the affinity of an LPI,
which will later be augmented with super duper extra GICv4
goodness.
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

The whole MSI injection process is fairly monolithic. An MSI write
gets turned into an injected LPI in one swift go. But this is actually
a more fine-grained process:

- First, a virtual ITS gets selected using the doorbell address
- Then the DevID/EventID pair gets translated into an LPI
- Finally the LPI is injected

Since the GICv4 code needs the first two steps in order to match
an IRQ routing entry to an LPI, let's expose them as helpers,
and refactor the existing code to use them
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

On reset we clear the valid bits of GITS_CBASER and GITS_BASER<n>.
We also clear command queue registers and free the cache (device,
collection, and lpi lists).

As we need to take the same locks as save/restore functions, we
create a vgic_its_ctrl() wrapper that handles KVM_DEV_ARM_VGIC_GRP_CTRL
group functions.
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

When the GITS_BASER<n>.Valid gets cleared, the data structures in
guest RAM are not valid anymore. The device, collection
and LPI lists stored in the in-kernel ITS represent the same
information in some form of cache. So let's void the cache.
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

We create two new functions that free the device and
collection lists. They are currently called by vgic_its_destroy()
and other callers will be added in subsequent patches.

We also remove the check on its->device_list.next.
Lists are initialized in vgic_create_its() and the device
is added to the device list only if this latter succeeds.

vgic_its_destroy is the device destroy ops. This latter is called
by kvm_destroy_devices() which loops on all created devices. So
at this point the list is initialized.
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Nwanghaibin <wanghaibin.wang@huawei.com>
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Let's remove kvm_its_unmap_device and use kvm_its_free_device
as both functions are identical.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

We are about to optimize our timer handling logic which involves
injecting irqs to the vgic directly from the irq handler.

Unfortunately, the injection path can take any AP list lock and irq lock
and we must therefore make sure to use spin_lock_irqsave where ever
interrupts are enabled and we are taking any of those locks, to avoid
deadlocking between process context and the ISR.

This changes a lot of the VGIC code, but the good news are that the
changes are mostly mechanical.
Acked-by: NMarc Zyngier <marc,zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

For unknown reasons, the its_ite data structure carries an "lpi" field
which contains the intid of the LPI. This is an obvious duplication
of the vgic_irq->intid field, so let's fix the only user and remove
the now useless field.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Commit 0e4e82f1 ("KVM: arm64: vgic-its: Enable ITS emulation as
a virtual MSI controller") tried to advertise KVM_CAP_MSI_DEVID, but
the code logic was not updating the dist->msis_require_devid field
correctly. If hypervisor tool creates the ITS device after VGIC
initialization then we don't advertise KVM_CAP_MSI_DEVID capability.

Update the field msis_require_devid to true inside vgic_its_create()
to fix the issue.

Fixes: 0e4e82f1 ("vgic-its: Enable ITS emulation as a virtual MSI controller")
Signed-off-by: NShanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When failing to restore the ITT for a DTE, we should remove the failed
device entry from the list and free the object.

We slightly refactor vgic_its_destroy to be able to reuse the now
separate vgic_its_free_dte() function.
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>

The only reason we called kvm_vgic_map_resources() when restoring the
ITS tables was because we wanted to have the KVM iodevs registered in
the KVM IO bus framework at the time when the ITS was restored such that
a restored and active device can inject MSIs prior to otherwise calling
kvm_vgic_map_resources() from the first run of a VCPU.

Since we now register the KVM iodevs for the redestributors and ITS as
soon as possible (when setting the base addresses), we no longer need
this call and kvm_vgic_map_resources() is again called only when first
running a VCPU.
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>

We have to register the ITS iodevice before running the VM, because in
migration scenarios, we may be restoring a live device that wishes to
inject MSIs before the VCPUs have started.

All we need to register the ITS io device is the base address of the
ITS, so we can simply register that when the base address of the ITS is
set.

  [ Code to fix concurrency issues when setting the ITS base address and
    to fix the undef base address check written by Marc Zyngier ]
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>

The its->initialized doesn't bring much to the table, and creates
unnecessary ordering between setting the address and initializing it
(which amounts to exactly nothing).

Let's kill it altogether, making KVM_DEV_ARM_VGIC_CTRL_INIT the no-op
it deserves to be.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>

In its_sync_lpi_pending_table() we currently ignore the
target_vcpu of the LPIs. We sync the pending bit found in
the vcpu pending table even if the LPI is not targeting it.

Also in vgic_its_cmd_handle_invall() we are supposed to
read the config table data for the LPIs associated to the
collection ID. At the moment we refresh all LPI config
information.

This patch passes a vpcu to vgic_copy_lpi_list() so that
this latter returns a snapshot of the LPIs targeting this
CPU and only those.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>

Implement routines to save and restore device ITT and their
interrupt table entries (ITE).
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>

This patch saves the device table entries into guest RAM.
Both flat table and 2 stage tables are supported. DeviceId
indexing is used.

For each device listed in the device table, we also save
the translation table using the vgic_its_save/restore_itt
routines. Those functions will be implemented in a subsequent
patch.

On restore, devices are re-allocated and their itt are
re-built.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>

As vgic_its_check_id() computes the device/collection entry's
GPA, let's return it so that new callers can retrieve it easily.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Acked-by: NChristoffer Dall <cdall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>

The save path copies the collection entries into guest RAM
at the GPA specified in the BASER register. This obviously
requires the BASER to be set. The last written element is a
dummy collection table entry.

We do not index by collection ID as the collection entry
can fit into 8 bytes while containing the collection ID.

On restore path we re-allocate the collection objects.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>

Add a generic scan_its_table() helper whose role consists in
scanning a contiguous table located in guest RAM and applying
a callback on each entry. Entries can be handled as linked lists
since the callback may return an id offset to the next entry and
also indicate whether the entry is the last one.

Helper functions also are added to compute the device/event ID
offset to the next DTE/ITE.

compute_next_devid_offset, compute_next_eventid_offset and
scan_table will become static in subsequent patches
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>

Add two new helpers to allocate an its ite and an its device.
This will avoid duplication on restore path.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>

Introduce new attributes in KVM_DEV_ARM_VGIC_GRP_CTRL group:
- KVM_DEV_ARM_ITS_SAVE_TABLES: saves the ITS tables into guest RAM
- KVM_DEV_ARM_ITS_RESTORE_TABLES: restores them into VGIC internal
  structures.

We hold the vcpus lock during the save and restore to make
sure no vcpu is running.

At this stage the functionality is not yet implemented. Only
the skeleton is put in place.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
[Given we will move the iodev register until setting the base addr]
Reviewed-by: NChristoffer Dall <cdall@linaro.org>

When creating the lpi we now ask the redistributor what is the state
of the LPI (priority, enabled, pending).
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>

this new helper synchronizes the irq pending_latch
with the LPI pending bit status found in rdist pending table.
As the status is consumed, we reset the bit in pending table.

As we need the PENDBASER_ADDRESS() in vgic-v3, let's move its
definition in the irqchip header. We restore the full length
of the field, ie [51:16]. Same for PROPBASER_ADDRESS with full
field length of [51:12].
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>

On MAPD we currently check the device id can be stored in the device table.
Let's first check it can be encoded within the range defined by TYPER
DEVBITS.

Also check the collection ID belongs to the 16 bit range as GITS_TYPER
CIL field equals to 0.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>

Up to now the MAPD ITT_addr had been ignored. We will need it
for save/restore. Let's record it in the its_device struct.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>

Up to now the MAPD's ITT size field has been ignored. It encodes
the number of eventid bit minus 1. It should be used to check
the eventid when a MAPTI command is issued on a device. Let's
store the number of eventid bits in the its_device and do the
check on MAPTI. Also make sure the ITT size field does
not exceed the GITS_TYPER IDBITS field.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>

The GITS_IIDR revision field is used to encode the migration ABI
revision. So we need to restore it to check the table layout is
readable by the destination.

By writing the IIDR, userspace thus forces the ABI revision to be
used and this must be less than or equal to the max revision KVM
supports.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>

We plan to support different migration ABIs, ie. characterizing
the ITS table layout format in guest RAM. For example, a new ABI
will be needed if vLPIs get supported for nested use case.

So let's introduce an array of supported ABIs (at the moment a single
ABI is supported though). The following characteristics are foreseen
to vary with the ABI: size of table entries, save/restore operation,
the way abi settings are applied.

By default the MAX_ABI_REV is applied on its creation. In subsequent
patches we will introduce a way for the userspace to change the ABI
in use.

The entry sizes now are set according to the ABI version and not
hardcoded anymore.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>

GITS_CREADR needs to be restored so let's implement the associated
uaccess_write_its callback. The write only is allowed if the its
is disabled.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>

This patch implements vgic_its_has_attr_regs and vgic_its_attr_regs_access
upon the MMIO framework. VGIC ITS KVM device KVM_DEV_ARM_VGIC_GRP_ITS_REGS
group becomes functional.

At least GITS_CREADR and GITS_IIDR require to differentiate a guest write
action from a user access. As such let's introduce a new uaccess_its_write
vgic_register_region callback.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>

The ITS KVM device exposes a new KVM_DEV_ARM_VGIC_GRP_ITS_REGS
group which allows the userspace to save/restore ITS registers.

At this stage the get/set/has operations are not yet implemented.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>

The actual abbreviation for the interrupt translation table entry
is ITE. Let's rename all itte instances by ite.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NChristoffer Dall <cdall@linaro.org>