Commit 7c051267 ("mm, fork: make dup_mmap wait for mmap_sem for
write killable") made it possible to kill a forking task while it is
waiting to acquire its ->mmap_sem for write, in dup_mmap().

However, it was overlooked that this introduced an new error path before
the new mm_struct's ->uprobes_state.xol_area has been set to NULL after
being copied from the old mm_struct by the memcpy in dup_mm().  For a
task that has previously hit a uprobe tracepoint, this resulted in the
'struct xol_area' being freed multiple times if the task was killed at
just the right time while forking.

Fix it by setting ->uprobes_state.xol_area to NULL in mm_init() rather
than in uprobe_dup_mmap().

With CONFIG_UPROBE_EVENTS=y, the bug can be reproduced by the same C
program given by commit 2b7e8665 ("fork: fix incorrect fput of
->exe_file causing use-after-free"), provided that a uprobe tracepoint
has been set on the fork_thread() function.  For example:

    $ gcc reproducer.c -o reproducer -lpthread
    $ nm reproducer | grep fork_thread
    0000000000400719 t fork_thread
    $ echo "p $PWD/reproducer:0x719" > /sys/kernel/debug/tracing/uprobe_events
    $ echo 1 > /sys/kernel/debug/tracing/events/uprobes/enable
    $ ./reproducer

Here is the use-after-free reported by KASAN:

    BUG: KASAN: use-after-free in uprobe_clear_state+0x1c4/0x200
    Read of size 8 at addr ffff8800320a8b88 by task reproducer/198

    CPU: 1 PID: 198 Comm: reproducer Not tainted 4.13.0-rc7-00015-g36fde05f #255
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014
    Call Trace:
     dump_stack+0xdb/0x185
     print_address_description+0x7e/0x290
     kasan_report+0x23b/0x350
     __asan_report_load8_noabort+0x19/0x20
     uprobe_clear_state+0x1c4/0x200
     mmput+0xd6/0x360
     do_exit+0x740/0x1670
     do_group_exit+0x13f/0x380
     get_signal+0x597/0x17d0
     do_signal+0x99/0x1df0
     exit_to_usermode_loop+0x166/0x1e0
     syscall_return_slowpath+0x258/0x2c0
     entry_SYSCALL_64_fastpath+0xbc/0xbe

    ...

    Allocated by task 199:
     save_stack_trace+0x1b/0x20
     kasan_kmalloc+0xfc/0x180
     kmem_cache_alloc_trace+0xf3/0x330
     __create_xol_area+0x10f/0x780
     uprobe_notify_resume+0x1674/0x2210
     exit_to_usermode_loop+0x150/0x1e0
     prepare_exit_to_usermode+0x14b/0x180
     retint_user+0x8/0x20

    Freed by task 199:
     save_stack_trace+0x1b/0x20
     kasan_slab_free+0xa8/0x1a0
     kfree+0xba/0x210
     uprobe_clear_state+0x151/0x200
     mmput+0xd6/0x360
     copy_process.part.8+0x605f/0x65d0
     _do_fork+0x1a5/0xbd0
     SyS_clone+0x19/0x20
     do_syscall_64+0x22f/0x660
     return_from_SYSCALL_64+0x0/0x7a

Note: without KASAN, you may instead see a "Bad page state" message, or
simply a general protection fault.

Link: http://lkml.kernel.org/r/20170830033303.17927-1-ebiggers3@gmail.com
Fixes: 7c051267 ("mm, fork: make dup_mmap wait for mmap_sem for write killable")
Signed-off-by: NEric Biggers <ebiggers@google.com>
Reported-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>    [4.7+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the worker thread continues getting work, it will hog the cpu and rcu
stall complains.  Make it a good citizen.  This is triggered in a loop
block device test.

Link: http://lkml.kernel.org/r/5de0a179b3184e1a2183fc503448b0269f24d75b.1503697127.git.shli@fb.comSigned-off-by: NShaohua Li <shli@fb.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We are doing a last second memory allocation attempt before calling
out_of_memory().  But since slab shrinker functions might indirectly
wait for other thread's __GFP_DIRECT_RECLAIM && !__GFP_NORETRY memory
allocations via sleeping locks, calling slab shrinker functions from
node_reclaim() from get_page_from_freelist() with oom_lock held has
possibility of deadlock.  Therefore, make sure that last second memory
allocation attempt does not call slab shrinker functions.

Link: http://lkml.kernel.org/r/1503577106-9196-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull libnvdimm fix from Dan Williams:
 "A single patch removing some structure definitions from a uapi header
  file. These payloads are never processed directly by the kernel they
  are simply passed through an ioctl as opaque blobs to the ACPI _DSM
  (Device Specific Method) interface.

  Userspace should not be depending on the kernel to define these
  payloads. We will instead provide these definitions via the existing
  libndctl (https://github.com/pmem/ndctl) project that has NVDIMM
  command helpers and other definitions"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm: clean up command definitions

Pull drm fixes from Dave Airlie:
 "Two fixes (a vmwgfx and core drm fix) in the queue for 4.13 final,
  hopefully that is it"

* tag 'drm-fixes-for-v4.13-rc8' of git://people.freedesktop.org/~airlied/linux:
  drm/vmwgfx: Fix F26 Wayland screen update issue
  drm/bridge/sii8620: Fix memory corruption

Pull SCSI fixes from James Bottomley:
 "Three minor fixes: a NULL deref in qedf, an off by one in sg and a fix
  to IPR to prevent an error on initialisation"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qedf: Fix a potential NULL pointer dereference
  scsi: sg: off by one in sg_ioctl()
  scsi: ipr: Set no_report_opcodes for RAID arrays

Pull UML fix from Richard Weinberger:
 "This contains a single fix for a regression which was introduced while
  the merge window"

* 'for-linus-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Fix check for _xstate for older hosts

Pull alpha update from Matt Turner:
 "A few fixes and wires up some additional syscalls."

[ Some of this is technically not really rc7 material, but it's alpha,
  and it all looks safe anyway. Matt explains: "My alpha has been
  offline, hence the very late-in-cycle pull request" and hasn't caused
  problems before, so he gets to slide.   - Linus ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: uapi: Add support for __SANE_USERSPACE_TYPES__
  alpha: Define ioremap_wc
  alpha: Fix section mismatches
  alpha: support R_ALPHA_REFLONG relocations for module loading
  alpha: Fix typo in ev6-copy_user.S
  alpha: Package string routines together
  alpha: Update for new syscalls
  alpha: Fix build error without CONFIG_VGA_HOSE.

Single vmwgfx fix.

* 'drm-vmwgfx-fixes' of git://people.freedesktop.org/~syeh/repos_linux:
  drm/vmwgfx: Fix F26 Wayland screen update issue

vmwgfx currently cannot support non-blocking commit because when
vmw_*_crtc_page_flip is called, drm_atomic_nonblocking_commit()
schedules the update on a thread.  This means vmw_*_crtc_page_flip
cannot rely on the new surface being bound before the subsequent
dirty and flush operations happen.

Cc: <stable@vger.kernel.org> # 4.12.x
Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NCharmaine Lee <charmainel@vmware.com>

Driver Changes:
- bridge/sii8620: Fix out-of-bounds write to incorrect register

Cc: Maciej Purski <m.purski@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>

* tag 'drm-misc-fixes-2017-08-28' of git://anongit.freedesktop.org/git/drm-misc:
  drm/bridge/sii8620: Fix memory corruption

This fixes compiler errors in perf such as:

tests/attr.c: In function 'store_event':
tests/attr.c:66:27: error: format '%llu' expects argument of type 'long long unsigned int', but argument 6 has type '__u64 {aka long unsigned int}' [-Werror=format=]
  snprintf(path, PATH_MAX, "%s/event-%d-%llu-%d", dir,
                           ^
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Cc: stable@vger.kernel.org
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Commit 3cc2dac5 ("drivers/video/fbdev/atyfb: Replace MTRR UC hole
with strong UC") introduces calls to ioremap_wc and ioremap_uc. This
causes build failures with alpha:allmodconfig. Map the missing functions
to ioremap_nocache.

Fixes: 3cc2dac5 ("drivers/video/fbdev/atyfb:
        Replace MTRR UC hole with strong UC")
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NMatt Turner <mattst88@gmail.com>

Since commit 71810db2 (modversions: treat symbol CRCs
as 32 bit quantities) R_ALPHA_REFLONG relocations can be required
to load modules. This implements it.
Tested-by: NBob Tracy <rct@gherkin.frus.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Patch 85250231 introduced a typo.

That said, the identity AND insns added by that patch are more
clearly written as MOV.  At the same time, re-schedule the ev6
version so that the first dispatch can execute in parallel.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

There are direct branches between {str*cpy,str*cat} and stx*cpy.
Ensure the branches are within range by merging these objects.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

pci_vga_hose is #defined to 0 in include/asm/vga.h if CONFIG_VGA_HOSE is
not set.
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Pull cgroup fix from Tejun Heo:
 "A late but obvious fix for cgroup.

  I broke the 'cpuset.memory_pressure' file a long time ago (v4.4) by
  accidentally deleting its file index, which made it a duplicate of the
  'cpuset.memory_migrate' file. Spotted and fixed by Waiman"

* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: Fix incorrect memory_pressure control file mapping

Pull libata fixes from Tejun Heo:
 "Late fixes for libata. There's a minor platform driver fix but the
  important one is READ LOG PAGE.

  This is a new ATA command which is used to test some optional features
  but it broke probing of some devices - they locked up instead of
  failing the unknown command.

  Christoph tried blacklisting, but, after finding out there are
  multiple devices which fail this way, backed off to testing feature
  bit in IDENTIFY data first, which is a bit lossy (we can miss features
  on some devices) but should be a lot safer"

* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  Revert "libata: quirk read log on no-name M.2 SSD"
  libata: check for trusted computing in IDENTIFY DEVICE data
  libata: quirk read log on no-name M.2 SSD
  sata: ahci-da850: Fix some error handling paths in 'ahci_da850_probe()'

This reverts commit aac2fea9.

It turns out that that patch was complete and utter garbage, and broke
KVM, resulting in odd oopses.

Quoting Andrea Arcangeli:
 "The aforementioned commit has 3 bugs.

  1) mmu_notifier_invalidate_range cannot be used in replacement of
     mmu_notifier_invalidate_range_start/end.

     For KVM mmu_notifier_invalidate_range is a noop and rightfully so.

     A MMU notifier implementation has to implement either
     ->invalidate_range method or the invalidate_range_start/end
     methods, not both. And if you implement invalidate_range_start/end
     like KVM is forced to do, calling mmu_notifier_invalidate_range in
     common code is a noop for KVM.

     For those MMU notifiers that can get away only implementing
     ->invalidate_range, the ->invalidate_range is implicitly called by
     mmu_notifier_invalidate_range_end(). And only those secondary MMUs
     that share the same pagetable with the primary MMU (like AMD
     iommuv2) can get away only implementing ->invalidate_range.

     So all cases (THP on/off) are broken right now.

     To fix this is enough to replace mmu_notifier_invalidate_range with
     mmu_notifier_invalidate_range_start;mmu_notifier_invalidate_range_end.
     Either that or call multiple mmu_notifier_invalidate_page like
     before.

  2) address + (1UL << compound_order(page) is buggy, it should be
     PAGE_SIZE << compound_order(page), it's bytes not pages, 2M not
     512.

  3) The whole invalidate_range thing was an attempt to call a single
     invalidate while walking multiple 4k ptes that maps the same THP
     (after a pmd virtual split without physical compound page THP
     split).

     It's unclear if the rmap_walk will always provide an address that
     is 2M aligned as parameter to try_to_unmap_one, in presence of THP.
     I think it needs also an address &= (PAGE_SIZE <<
     compound_order(page)) - 1 to be safe"

In general, we should stop making excuses for horrible MMU notifier
users.  It's much more important that the core VM is sane and safe, than
letting MMU notifiers sleep.

So if some MMU notifier is sleeping under a spinlock, we need to fix the
notifier, not try to make excuses for that garbage in the core VM.
Reported-and-tested-by: NBernhard Held <berny156@gmx.de>
Reported-and-tested-by: NAdam Borowski <kilobyte@angband.pl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: axie <axie@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 35f0b6a7.

We now conditionalize issuing of READ LOG PAGE on the TRUSTED
COMPUTING SUPPORTED bit in the identity data and this shouldn't be
necessary.
Signed-off-by: NTejun Heo <tj@kernel.org>

ATA-8 and later mirrors the TRUSTED COMPUTING SUPPORTED bit in word 48 of
the IDENTIFY DEVICE data.  Check this before issuing a READ LOG PAGE
command to avoid issues with buggy devices.  The only downside is that
we can't support Security Send / Receive for a device with an older
revision due to the conflicting use of this field in earlier
specifications.

tj: The reason we need this is because some devices which don't
    support READ LOG PAGE lock up after getting issued that command.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Commit 3510ca20 ("Minor page waitqueue cleanups") made the page
queue code always add new waiters to the back of the queue, which helps
upcoming patches to batch the wakeups for some horrid loads where the
wait queues grow to thousands of entries.

However, I forgot about the nasrt add_page_wait_queue() special case
code that is only used by the cachefiles code.  That one still continued
to add the new wait queue entries at the beginning of the list.

Fix it, because any sane batched wakeup will require that we don't
suddenly start getting new entries at the beginning of the list that we
already handled in a previous batch.

[ The current code always does the whole list while holding the lock, so
  wait queue ordering doesn't matter for correctness, but even then it's
  better to add later entries at the end from a fairness standpoint ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When !NUMA, cpumask_of_node(@node) equals cpu_online_mask regardless of
@node.  The assumption seems that if !NUMA, there shouldn't be more than
one node and thus reporting cpu_online_mask regardless of @node is
correct.  However, that assumption was broken years ago to support
DISCONTIGMEM and whether a system has multiple nodes or not is
separately controlled by NEED_MULTIPLE_NODES.

This means that, on a system with !NUMA && NEED_MULTIPLE_NODES,
cpumask_of_node() will report cpu_online_mask for all possible nodes,
indicating that the CPUs are associated with multiple nodes which is an
impossible configuration.

This bug has been around forever but doesn't look like it has caused any
noticeable symptoms.  However, it triggers a WARN recently added to
workqueue to verify NUMA affinity configuration.

Fix it by reporting empty cpumask on non-zero nodes if !NUMA.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-and-tested-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recent commit a8ec3ee8 "arc: Mask individual IRQ lines during core
INTC init" breaks interrupt handling on ARCv2 SMP systems.

That commit masked all interrupts at onset, as some controllers on some
boards (customer as well as internal), would assert interrutps early
before any handlers were installed.  For SMP systems, the masking was
done at each cpu's core-intc.  Later, when the IRQ was actually
requested, it was unmasked, but only on the requesting cpu.

For "common" interrupts, which were wired up from the 2nd level IDU
intc, this was as issue as they needed to be enabled on ALL the cpus
(given that IDU IRQs are by default served Round Robin across cpus)

So fix that by NOT masking "common" interrupts at core-intc, but instead
at the 2nd level IDU intc (latter already being done in idu_of_init())

Fixes: a8ec3ee8 ("arc: Mask individual IRQ lines during core INTC init")
Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
[vgupta: reworked changelog, removed the extraneous idu_irq_mask_raw()]
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 464d6242 ("select: switch compat_{get,put}_fd_set() to
compat_{get,put}_bitmap()") changed the calculation on how many bytes
need to be zeroed when userspace handed over a NULL pointer for a fdset
array in the select syscall.

The calculation was changed in compat_get_fd_set() wrongly from
	memset(fdset, 0, ((nr + 1) & ~1)*sizeof(compat_ulong_t));
to
	memset(fdset, 0, ALIGN(nr, BITS_PER_LONG));

The ALIGN(nr, BITS_PER_LONG) calculates the number of _bits_ which need
to be zeroed in the target fdset array (rounded up to the next full bits
for an unsigned long).

But the memset() call expects the number of _bytes_ to be zeroed.

This leads to clearing more memory than wanted (on the stack area or
even at kmalloc()ed memory areas) and to random kernel crashes as we
have seen them on the parisc platform.

The correct change should have been

	memset(fdset, 0, (ALIGN(nr, BITS_PER_LONG) / BITS_PER_LONG) * BYTES_PER_LONG);

which is the same as can be archieved with a call to

	zero_fd_set(nr, fdset).

Fixes: 464d6242 ("select: switch compat_{get,put}_fd_set() to compat_{get,put}_bitmap()"
Acked-by: N: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull c6x tweaks from Mark Salter.

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  c6x: Convert to using %pOF instead of full_name
  c6x: defconfig: Cleanup from old Kconfig options

Ido reported that reading the log page on his systems fails,
so quirk it as it won't support ZBC or security protocols.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NIdo Schimmel <idosch@mellanox.com>
Tested-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Remove the command payloads that do not have an associated libnvdimm
ioctl. I.e. remove the payloads that would only ever be carried in the
ND_CMD_CALL envelope. This prevents userspace from growing unnecessary
dependencies on this kernel header when userspace already has everything
it needs to craft and send these commands.

Cc: Jerry Hoemann <jerry.hoemann@hpe.com>
Reported-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Pull IOMMU fix from Joerg Roedel:
 "Another fix, this time in common IOMMU sysfs code.

  In the conversion from the old iommu sysfs-code to the
  iommu_device_register interface, I missed to update the release path
  for the struct device associated with an IOMMU. It freed the 'struct
  device', which was a pointer before, but is now embedded in another
  struct.

  Freeing from the middle of allocated memory had all kinds of nasty
  side effects when an IOMMU was unplugged. Unfortunatly nobody
  unplugged and IOMMU until now, so this was not discovered earlier. The
  fix is to make the 'struct device' a pointer again"

* tag 'iommu-fixes-v4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Fix wrong freeing of iommu_device->dev

Pull char/misc fix from Greg KH:
 "Here is a single misc driver fix for 4.13-rc7. It resolves a reported
  problem in the Android binder driver due to previous patches in
  4.13-rc.

  It's been in linux-next with no reported issues"

* tag 'char-misc-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  ANDROID: binder: fix proc->tsk check.

Pull staging/iio fixes from Greg KH:
 "Here are few small staging driver fixes, and some more IIO driver
  fixes for 4.13-rc7. Nothing major, just resolutions for some reported
  problems.

  All of these have been in linux-next with no reported problems"

* tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: magnetometer: st_magn: remove ihl property for LSM303AGR
  iio: magnetometer: st_magn: fix status register address for LSM303AGR
  iio: hid-sensor-trigger: Fix the race with user space powering up sensors
  iio: trigger: stm32-timer: fix get trigger mode
  iio: imu: adis16480: Fix acceleration scale factor for adis16480
  PATCH] iio: Fix some documentation warnings
  staging: rtl8188eu: add RNX-N150NUB support
  Revert "staging: fsl-mc: be consistent when checking strcmp() return"
  iio: adc: stm32: fix common clock rate
  iio: adc: ina219: Avoid underflow for sleeping time
  iio: trigger: stm32-timer: add enable attribute
  iio: trigger: stm32-timer: fix get/set down count direction
  iio: trigger: stm32-timer: fix write_raw return value
  iio: trigger: stm32-timer: fix quadrature mode get routine
  iio: bmp280: properly initialize device for humidity reading

Pull NTB fixes from Jon Mason:
 "NTB bug fixes to address an incorrect ntb_mw_count reference in the
  NTB transport, improperly bringing down the link if SPADs are
  corrupted, and an out-of-order issue regarding link negotiation and
  data passing"

* tag 'ntb-4.13-bugfixes' of git://github.com/jonmason/ntb:
  ntb: ntb_test: ensure the link is up before trying to configure the mws
  ntb: transport shouldn't disable link due to bogus values in SPADs
  ntb: use correct mw_count function in ntb_tool and ntb_transport

The "lock_page_killable()" function waits for exclusive access to the
page lock bit using the WQ_FLAG_EXCLUSIVE bit in the waitqueue entry
set.

That means that if it gets woken up, other waiters may have been
skipped.

That, in turn, means that if it sees the page being unlocked, it *must*
take that lock and return success, even if a lethal signal is also
pending.

So instead of checking for lethal signals first, we need to check for
them after we've checked the actual bit that we were waiting for.  Even
if that might then delay the killing of the process.

This matches the order of the old "wait_on_bit_lock()" infrastructure
that the page locking used to use (and is still used in a few other
areas).

Note that if we still return an error after having unsuccessfully tried
to acquire the page lock, that is ok: that means that some other thread
was able to get ahead of us and lock the page, and when that other
thread then unlocks the page, the wakeup event will be repeated.  So any
other pending waiters will now get properly woken up.

Fixes: 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit")
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tim Chen and Kan Liang have been battling a customer load that shows
extremely long page wakeup lists.  The cause seems to be constant NUMA
migration of a hot page that is shared across a lot of threads, but the
actual root cause for the exact behavior has not been found.

Tim has a patch that batches the wait list traversal at wakeup time, so
that we at least don't get long uninterruptible cases where we traverse
and wake up thousands of processes and get nasty latency spikes.  That
is likely 4.14 material, but we're still discussing the page waitqueue
specific parts of it.

In the meantime, I've tried to look at making the page wait queues less
expensive, and failing miserably.  If you have thousands of threads
waiting for the same page, it will be painful.  We'll need to try to
figure out the NUMA balancing issue some day, in addition to avoiding
the excessive spinlock hold times.

That said, having tried to rewrite the page wait queues, I can at least
fix up some of the braindamage in the current situation. In particular:

 (a) we don't want to continue walking the page wait list if the bit
     we're waiting for already got set again (which seems to be one of
     the patterns of the bad load).  That makes no progress and just
     causes pointless cache pollution chasing the pointers.

 (b) we don't want to put the non-locking waiters always on the front of
     the queue, and the locking waiters always on the back.  Not only is
     that unfair, it means that we wake up thousands of reading threads
     that will just end up being blocked by the writer later anyway.

Also add a comment about the layout of 'struct wait_page_key' - there is
an external user of it in the cachefiles code that means that it has to
match the layout of 'struct wait_bit_key' in the two first members.  It
so happens to match, because 'struct page *' and 'unsigned long *' end
up having the same values simply because the page flags are the first
member in struct page.

Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Christopher Lameter <cl@linux.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have a MAX_LFS_FILESIZE macro that is meant to be filled in by
filesystems (and other IO targets) that know they are 64-bit clean and
don't have any 32-bit limits in their IO path.

It turns out that our 32-bit value for that limit was bogus.  On 32-bit,
the VM layer is limited by the page cache to only 32-bit index values,
but our logic for that was confusing and actually wrong.  We used to
define that value to

	(((loff_t)PAGE_SIZE << (BITS_PER_LONG-1))-1)

which is actually odd in several ways: it limits the index to 31 bits,
and then it limits files so that they can't have data in that last byte
of a page that has the highest 31-bit index (ie page index 0x7fffffff).

Neither of those limitations make sense.  The index is actually the full
32 bit unsigned value, and we can use that whole full page.  So the
maximum size of the file would logically be "PAGE_SIZE << BITS_PER_LONG".

However, we do wan tto avoid the maximum index, because we have code
that iterates over the page indexes, and we don't want that code to
overflow.  So the maximum size of a file on a 32-bit host should
actually be one page less than the full 32-bit index.

So the actual limit is ULONG_MAX << PAGE_SHIFT.  That means that we will
not actually be using the page of that last index (ULONG_MAX), but we
can grow a file up to that limit.

The wrong value of MAX_LFS_FILESIZE actually caused problems for Doug
Nazar, who was still using a 32-bit host, but with a 9.7TB 2 x RAID5
volume.  It turns out that our old MAX_LFS_FILESIZE was 8TiB (well, one
byte less), but the actual true VM limit is one page less than 16TiB.

This was invisible until commit c2a9737f ("vfs,mm: fix a dead loop
in truncate_inode_pages_range()"), which started applying that
MAX_LFS_FILESIZE limit to block devices too.

NOTE! On 64-bit, the page index isn't a limiter at all, and the limit is
actually just the offset type itself (loff_t), which is signed.  But for
clarity, on 64-bit, just use the maximum signed value, and don't make
people have to count the number of 'f' characters in the hex constant.

So just use LLONG_MAX for the 64-bit case.  That was what the value had
been before too, just written out as a hex constant.

Fixes: c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()")
Reported-and-tested-by: NDoug Nazar <nazard@nazar.ca>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull input fixes from Dmitry Torokhov:

 - a tweak to the IBM Trackpoint driver that helps recognizing
   trackpoints on never Lenovo Carbons

 - a fix to the ALPS driver solving scroll issues on some Dells

 - yet another ACPI ID has been added to Elan I2C toucpad driver

 - quieted diagnostic message in soc_button_array driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad
  Input: soc_button_array - silence -ENOENT error on Dell XPS13 9365
  Input: trackpoint - add new trackpoint firmware ID
  Input: elan_i2c - add ELAN0602 ACPI ID to support Lenovo Yoga310