The struct_size macro does the same calculation and is safe regarding
overflows. Though we're not expecting them to happen, use the helper for
clarity.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There are temporary variables tracking the index of P and Q stripes, but
none of them is really used as such, merely for determining if the Q
stripe is present. This leads to compiler warnings with
-Wunused-but-set-variable and has been reported several times.

fs/btrfs/raid56.c: In function ‘finish_rmw’:
fs/btrfs/raid56.c:1199:6: warning: variable ‘p_stripe’ set but not used [-Wunused-but-set-variable]
 1199 |  int p_stripe = -1;
      |      ^~~~~~~~
fs/btrfs/raid56.c: In function ‘finish_parity_scrub’:
fs/btrfs/raid56.c:2356:6: warning: variable ‘p_stripe’ set but not used [-Wunused-but-set-variable]
 2356 |  int p_stripe = -1;
      |      ^~~~~~~~

Replace the two variables with one that has a clear meaning and also get
rid of the warnings. The logic that verifies that there are only 2
valid cases is unchanged.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In lock_stripe_add() we're caching the bucket for the stripe hash table
just for a single call to dereference the stripe hash.

If we just directly call rbio_bucket() we can safe the pointless local
variable.

Also move the dereferencing of the stripe hash outside of the variable
declaration block to not break over the 80 characters limit.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In lock_stripe_add() we're traversing the stripe hash list and check if
the current list element's raid_map equals is equal to the raid bio's
raid_map. If both are equal we continue processing.

If we'd check for inequality instead of equality we can reduce one level
of indentation.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Commit 9e0af237 ("Btrfs: fix task hang under heavy compressed
write") worked around the issue that a recycled work item could get a
false dependency on the original work item due to how the workqueue code
guarantees non-reentrancy. It did so by giving different work functions
to different types of work.

However, the fixes in the previous few patches are more complete, as
they prevent a work item from being recycled at all (except for a tiny
window that the kernel workqueue code handles for us). This obsoletes
the previous fix, so we don't need the unique helpers for correctness.
The only other reason to keep them would be so they show up in stack
traces, but they always seem to be optimized to a tail call, so they
don't show up anyways. So, let's just get rid of the extra indirection.

While we're here, rename normal_work_helper() to the more informative
btrfs_work_helper().
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We only have two callers that need the integer loop iterator, and they
can easily maintain it themselves.
Suggested-by: NMatthew Wilcox <willy@infradead.org>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NDavid Sterba <dsterba@suse.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Acked-by: NColy Li <colyli@suse.de>
Reviewed-by: NMatthew Wilcox <willy@infradead.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Parity page is incorrectly unmapped in finish_parity_scrub(), triggering
a reference counter bug on i386, i.e.:

 [ 157.662401] kernel BUG at mm/highmem.c:349!
 [ 157.666725] invalid opcode: 0000 [#1] SMP PTI

The reason is that kunmap(p_page) was completely left out, so we never
did an unmap for the p_page and the loop unmapping the rbio page was
iterating over the wrong number of stripes: unmapping should be done
with nr_data instead of rbio->real_stripes.

Test case to reproduce the bug:

 - create a raid5 btrfs filesystem:
   # mkfs.btrfs -m raid5 -d raid5 /dev/sdb /dev/sdc /dev/sdd /dev/sde

 - mount it:
   # mount /dev/sdb /mnt

 - run btrfs scrub in a loop:
   # while :; do btrfs scrub start -BR /mnt; done

BugLink: https://bugs.launchpad.net/bugs/1812845
Fixes: 5a6ac9ea ("Btrfs, raid56: support parity scrub on raid56")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NAndrea Righi <andrea.righi@canonical.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This patch introduces one extra iterator variable to bio_for_each_segment_all(),
then we can allow bio_for_each_segment_all() to iterate over multi-page bvec.

Given it is just one mechannical & simple change on all bio_for_each_segment_all()
users, this patch does tree-wide change in one single patch, so that we can
avoid to use a temporary helper for this conversion.
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The typos accumulate over time so once in a while time they get fixed in
a large patch.
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Add fall-back code to catch failure of full_stripe_write. Proper error
handling from inside run_plug would need more code restructuring as it's
called at arbitrary points by io scheduler.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There's only one call site of the unlocked helper so it can be folded
into the caller.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NDavid Sterba <dsterba@suse.com>

Add helper that schedules a given function to run on the rmw workqueue.
This will replace several standalone helpers.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The helper is trivial and marked as deprecated.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Remove includes if none of the interfaces and exports is used in the
given source file.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Use the helper that's possibly optimized for full page copies.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In the quest to remove all stack VLA usage from the kernel[1], this
allocates the working buffers during regular init, instead of using stack
space. This refactors the allocation code a bit to make it easier
to review.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Remove GPL boilerplate text (long, short, one-line) and keep the rest,
ie. personal, company or original source copyright statements. Add the
SPDX header.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Rebuild on missing device is as same as recover, after it's done, rbio
has data which is consistent with on-disk data, so it can be cached to
avoid further reads.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NLiu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

async_missing_raid56() is identical to async_read_rebuild().
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

On detaching of a disk which is a part of a RAID6 filesystem, the
following kernel OOPS may happen:

[63122.680461] BTRFS error (device sdo): bdev /dev/sdo errs: wr 0, rd 0, flush 1, corrupt 0, gen 0
[63122.719584] BTRFS warning (device sdo): lost page write due to IO error on /dev/sdo
[63122.719587] BTRFS error (device sdo): bdev /dev/sdo errs: wr 1, rd 0, flush 1, corrupt 0, gen 0
[63122.803516] BTRFS warning (device sdo): lost page write due to IO error on /dev/sdo
[63122.803519] BTRFS error (device sdo): bdev /dev/sdo errs: wr 2, rd 0, flush 1, corrupt 0, gen 0
[63122.863902] BTRFS critical (device sdo): fatal error on device /dev/sdo
[63122.935338] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
[63122.946554] IP: fail_bio_stripe+0x58/0xa0 [btrfs]
[63122.958185] PGD 9ecda067 P4D 9ecda067 PUD b2b37067 PMD 0
[63122.971202] Oops: 0000 [#1] SMP
[63123.006760] CPU: 0 PID: 3979 Comm: kworker/u8:9 Tainted: G W 4.14.2-16-scst34x+ #8
[63123.007091] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[63123.007402] Workqueue: btrfs-worker btrfs_worker_helper [btrfs]
[63123.007595] task: ffff880036ea4040 task.stack: ffffc90006384000
[63123.007796] RIP: 0010:fail_bio_stripe+0x58/0xa0 [btrfs]
[63123.007968] RSP: 0018:ffffc90006387ad8 EFLAGS: 00010287
[63123.008140] RAX: 0000000000000002 RBX: ffff88004beaa0b8 RCX: ffff8800b2bd5690
[63123.008359] RDX: 0000000000000000 RSI: ffff88007bb43500 RDI: ffff88004beaa000
[63123.008621] RBP: ffffc90006387ae8 R08: 0000000099100000 R09: ffff8800b2bd5600
[63123.008840] R10: 0000000000000004 R11: 0000000000010000 R12: ffff88007bb43500
[63123.009059] R13: 00000000fffffffb R14: ffff880036fc5180 R15: 0000000000000004
[63123.009278] FS: 0000000000000000(0000) GS:ffff8800b7000000(0000) knlGS:0000000000000000
[63123.009564] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[63123.009748] CR2: 0000000000000080 CR3: 00000000b0866000 CR4: 00000000000406f0
[63123.009969] Call Trace:
[63123.010085] raid_write_end_io+0x7e/0x80 [btrfs]
[63123.010251] bio_endio+0xa1/0x120
[63123.010378] generic_make_request+0x218/0x270
[63123.010921] submit_bio+0x66/0x130
[63123.011073] finish_rmw+0x3fc/0x5b0 [btrfs]
[63123.011245] full_stripe_write+0x96/0xc0 [btrfs]
[63123.011428] raid56_parity_write+0x117/0x170 [btrfs]
[63123.011604] btrfs_map_bio+0x2ec/0x320 [btrfs]
[63123.011759] ? ___cache_free+0x1c5/0x300
[63123.011909] __btrfs_submit_bio_done+0x26/0x50 [btrfs]
[63123.012087] run_one_async_done+0x9c/0xc0 [btrfs]
[63123.012257] normal_work_helper+0x19e/0x300 [btrfs]
[63123.012429] btrfs_worker_helper+0x12/0x20 [btrfs]
[63123.012656] process_one_work+0x14d/0x350
[63123.012888] worker_thread+0x4d/0x3a0
[63123.013026] ? _raw_spin_unlock_irqrestore+0x15/0x20
[63123.013192] kthread+0x109/0x140
[63123.013315] ? process_scheduled_works+0x40/0x40
[63123.013472] ? kthread_stop+0x110/0x110
[63123.013610] ret_from_fork+0x25/0x30
[63123.014469] RIP: fail_bio_stripe+0x58/0xa0 [btrfs] RSP: ffffc90006387ad8
[63123.014678] CR2: 0000000000000080
[63123.016590] ---[ end trace a295ea7259c17880 ]—

This is reproducible in a cycle, where a series of writes is followed by
SCSI device delete command. The test may take up to few minutes.

Fixes: 74d46992 ("block: replace bi_bdev with a gendisk pointer and partitions index")
[ no signed-off-by provided ]
Author: Dmitriy Gorokh <Dmitriy.Gorokh@wdc.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Before rbio_orig_end_io() goes to free rbio, rbio may get merged with
more bios from other rbios and rbio->bio_list becomes non-empty,
in that case, these newly merged bios don't end properly.

Once unlock_stripe() is done, rbio->bio_list will not be updated any
more and we can call bio_endio() on all queued bios.

It should only happen in error-out cases, the normal path of recover
and full stripe write have already set RBIO_RMW_LOCKED_BIT to disable
merge before doing IO, so rbio_orig_end_io() called by them doesn't
have the above issue.
Reported-by: NJérôme Carretero <cJ-ko@zougloub.eu>
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since raid6 recover tries all possible combinations of failed stripes,

- when raid6 rebuild algorithm is used, i.e. raid6_datap_recov() and
  raid6_2data_recov(), it may change the in-memory content of failed
  stripes, if such a raid bio is cached, a later raid write rmw or recover
  can steal @stripe_pages from it instead of reading from disks, such that
  it carries the wrong content to do write rmw or recovery and ends up
  with corruption or recovery failures.

- when raid5 rebuild algorithm is used, i.e. xor, raid bio can be cached
  because the only failed stripe which contains @rbio->bio_pages gets
  modified, others remain the same so that their in-memory content is
  consistent with their on-disk content.

This adds a check to skip caching rbio if using raid6 recover.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Bio iterated by set_bio_pages_uptodate() is raid56 internal one, so it
will never be a BIO_CLONED bio, and since this is called by end_io
functions, bio->bi_iter.bi_size is zero, we mustn't use
bio_for_each_segment() as that is a no-op if bi_size is zero.

Fixes: 6592e58c ("Btrfs: fix write corruption due to bio cloning on raid5/6")
Cc: <stable@vger.kernel.org> # v4.12-rc6+
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since fail stripe index in rbio would be used to decide which
algorithm reconstruction would be run, we cannot merge rbios if
their's fail striped indexes are different, otherwise, one of the two
reconstructions would fail.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Given the above
'
if (last->operation != cur->operation)
	return 0;
',
it's guaranteed that two operations are same.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There is a scenario that can end up with rebuild process failing to
return good content, i.e.
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,

- the 1st retry is to rebuild with all other stripes, it'll eventually
  be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
  that it will do raid6 style rebuild,

however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content, and users will think of this as data loss.
More seriouly, if the loss happens on some important internal btree
roots, it could refuse to mount.

This extends btrfs to do more retries and each retry fails only one
stripe.  Since raid6 can tolerate 2 disk failures, if there is one
more failure besides the failure on which we're recovering, this can
always work.

The worst case is to retry as many times as the number of raid6 disks,
but given the fact that such a scenario is really rare in practice,
it's still acceptable.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In fact nobody is waiting on @wait's waitqueue, it can be safely
removed.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The defined wait is not used anywhere.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The local bio_list may have pending bios when doing cleanup, it can
end up with memory leak if they don't get freed.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

After mapping block with BTRFS_MAP_WRITE, parities have been sorted to
the end position, so this search can start from the first parity
stripe.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ copied changelog as a comment ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This fixes several instances of blk_status_t and bare errno ints being
mixed up, some of which are real bugs.

In the normal case, 0 matches BLK_STS_OK, so we don't observe any
effects of the missing conversion, but in case of errors or passes
through the repair/retry paths, the errors get mixed up.

The changes were identified using 'sparse', we don't have reports of the
buggy behaviour.

Fixes: 4e4cbee9 ("block: switch bios to blk_status_t")
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This way we don't need a block_device structure to submit I/O.  The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open.  Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).

For the actual I/O path all that we need is the gendisk, which exists
once per block device.  But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.

Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The recent changes to make bio cloning faster (added in the 4.13 merge
window) by using the bio_clone_fast() API introduced a regression on
raid5/6 modes, because cloned bios have an invalid bi_vcnt field
(therefore it can not be used) and the raid5/6 code uses the
bio_for_each_segment_all() API to iterate the segments of a bio, and this
API uses a bio's bi_vcnt field.

The issue is very simple to trigger by doing for example a direct IO write
against a raid5 or raid6 filesystem and then attempting to read what we
wrote before:

  $ mkfs.btrfs -m raid5 -d raid5 -f /dev/sdc /dev/sdd /dev/sde /dev/sdf
  $ mount /dev/sdc /mnt
  $ xfs_io -f -d -c "pwrite -S 0xab 0 1M" /mnt/foobar
  $ od -t x1 /mnt/foobar
  od: /mnt/foobar: read error: Input/output error

For that example, the following is also reported in dmesg/syslog:

  [18274.985557] btrfs_print_data_csum_error: 18 callbacks suppressed
  [18274.995277] BTRFS warning (device sdf): csum failed root 5 ino 257 off 0 csum 0x98f94189 expected csum 0x94374193 mirror 1
  [18274.997205] BTRFS warning (device sdf): csum failed root 5 ino 257 off 4096 csum 0x98f94189 expected csum 0x94374193 mirror 1
  [18275.025221] BTRFS warning (device sdf): csum failed root 5 ino 257 off 8192 csum 0x98f94189 expected csum 0x94374193 mirror 1
  [18275.047422] BTRFS warning (device sdf): csum failed root 5 ino 257 off 12288 csum 0x98f94189 expected csum 0x94374193 mirror 1
  [18275.054818] BTRFS warning (device sdf): csum failed root 5 ino 257 off 4096 csum 0x98f94189 expected csum 0x94374193 mirror 1
  [18275.054834] BTRFS warning (device sdf): csum failed root 5 ino 257 off 8192 csum 0x98f94189 expected csum 0x94374193 mirror 1
  [18275.054943] BTRFS warning (device sdf): csum failed root 5 ino 257 off 8192 csum 0x98f94189 expected csum 0x94374193 mirror 2
  [18275.055207] BTRFS warning (device sdf): csum failed root 5 ino 257 off 8192 csum 0x98f94189 expected csum 0x94374193 mirror 3
  [18275.055571] BTRFS warning (device sdf): csum failed root 5 ino 257 off 0 csum 0x98f94189 expected csum 0x94374193 mirror 1
  [18275.062171] BTRFS warning (device sdf): csum failed root 5 ino 257 off 12288 csum 0x98f94189 expected csum 0x94374193 mirror 1

A scrub will also fail correcting bad copies, mentioning the following in
dmesg/syslog:

  [18276.128696] scrub_handle_errored_block: 498 callbacks suppressed
  [18276.129617] BTRFS warning (device sdf): checksum error at logical 2186346496 on dev /dev/sde, sector 2116608, root 5, inode 257, offset 65536, length 4096, links $
  [18276.149235] btrfs_dev_stat_print_on_error: 498 callbacks suppressed
  [18276.157897] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
  [18276.206059] BTRFS warning (device sdf): checksum error at logical 2186477568 on dev /dev/sdd, sector 2116736, root 5, inode 257, offset 196608, length 4096, links$
  [18276.206059] BTRFS error (device sdf): bdev /dev/sdd errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
  [18276.306552] BTRFS warning (device sdf): checksum error at logical 2186543104 on dev /dev/sdd, sector 2116864, root 5, inode 257, offset 262144, length 4096, links$
  [18276.319152] BTRFS error (device sdf): bdev /dev/sdd errs: wr 0, rd 0, flush 0, corrupt 2, gen 0
  [18276.394316] BTRFS warning (device sdf): checksum error at logical 2186739712 on dev /dev/sdf, sector 2116992, root 5, inode 257, offset 458752, length 4096, links$
  [18276.396348] BTRFS error (device sdf): bdev /dev/sdf errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
  [18276.434127] BTRFS warning (device sdf): checksum error at logical 2186870784 on dev /dev/sde, sector 2117120, root 5, inode 257, offset 589824, length 4096, links$
  [18276.434127] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 2, gen 0
  [18276.500504] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186477568 on dev /dev/sdd
  [18276.538400] BTRFS warning (device sdf): checksum error at logical 2186481664 on dev /dev/sdd, sector 2116744, root 5, inode 257, offset 200704, length 4096, links$
  [18276.540452] BTRFS error (device sdf): bdev /dev/sdd errs: wr 0, rd 0, flush 0, corrupt 3, gen 0
  [18276.542012] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186481664 on dev /dev/sdd
  [18276.585030] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186346496 on dev /dev/sde
  [18276.598306] BTRFS warning (device sdf): checksum error at logical 2186412032 on dev /dev/sde, sector 2116736, root 5, inode 257, offset 131072, length 4096, links$
  [18276.598310] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 3, gen 0
  [18276.598582] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186350592 on dev /dev/sde
  [18276.603455] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 4, gen 0
  [18276.638362] BTRFS warning (device sdf): checksum error at logical 2186354688 on dev /dev/sde, sector 2116624, root 5, inode 257, offset 73728, length 4096, links $
  [18276.640445] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 5, gen 0
  [18276.645942] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186354688 on dev /dev/sde
  [18276.657204] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186412032 on dev /dev/sde
  [18276.660563] BTRFS warning (device sdf): checksum error at logical 2186416128 on dev /dev/sde, sector 2116744, root 5, inode 257, offset 135168, length 4096, links$
  [18276.664609] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 6, gen 0
  [18276.664609] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186358784 on dev /dev/sde

So fix this by using the bio_for_each_segment() API and setting before
the bio's bi_iter field to the value of the corresponding btrfs bio
container's saved iterator if we are processing a cloned bio in the
raid5/6 code (the same code processes both cloned and non-cloned bios).

This incorrect iteration of cloned bios was also causing some occasional
BUG_ONs when running fstest btrfs/064, which have a trace like the
following:

  [ 6674.416156] ------------[ cut here ]------------
  [ 6674.416157] kernel BUG at fs/btrfs/raid56.c:1897!
  [ 6674.416159] invalid opcode: 0000 [#1] PREEMPT SMP
  [ 6674.416160] Modules linked in: dm_flakey dm_mod dax ppdev tpm_tis parport_pc tpm_tis_core evdev tpm psmouse sg i2c_piix4 pcspkr parport i2c_core serio_raw button s
  [ 6674.416184] CPU: 3 PID: 19236 Comm: kworker/u32:10 Not tainted 4.12.0-rc6-btrfs-next-44+ #1
  [ 6674.416185] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
  [ 6674.416210] Workqueue: btrfs-endio btrfs_endio_helper [btrfs]
  [ 6674.416211] task: ffff880147f6c740 task.stack: ffffc90001fb8000
  [ 6674.416229] RIP: 0010:__raid_recover_end_io+0x1ac/0x370 [btrfs]
  [ 6674.416230] RSP: 0018:ffffc90001fbbb90 EFLAGS: 00010217
  [ 6674.416231] RAX: ffff8801ff4b4f00 RBX: 0000000000000002 RCX: 0000000000000001
  [ 6674.416232] RDX: ffff880099b045d8 RSI: ffffffff81a5f6e0 RDI: 0000000000000004
  [ 6674.416232] RBP: ffffc90001fbbbc8 R08: 0000000000000001 R09: 0000000000000001
  [ 6674.416233] R10: ffffc90001fbbac8 R11: 0000000000001000 R12: 0000000000000002
  [ 6674.416234] R13: ffff880099b045c0 R14: 0000000000000004 R15: ffff88012bff2000
  [ 6674.416235] FS:  0000000000000000(0000) GS:ffff88023f2c0000(0000) knlGS:0000000000000000
  [ 6674.416235] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 6674.416236] CR2: 00007f28cf282000 CR3: 00000001000c6000 CR4: 00000000000006e0
  [ 6674.416239] Call Trace:
  [ 6674.416259]  __raid56_parity_recover+0xfc/0x16e [btrfs]
  [ 6674.416276]  raid56_parity_recover+0x157/0x16b [btrfs]
  [ 6674.416293]  btrfs_map_bio+0xe0/0x259 [btrfs]
  [ 6674.416310]  btrfs_submit_bio_hook+0xbf/0x147 [btrfs]
  [ 6674.416327]  end_bio_extent_readpage+0x27b/0x4a0 [btrfs]
  [ 6674.416331]  bio_endio+0x17d/0x1b3
  [ 6674.416346]  end_workqueue_fn+0x3c/0x3f [btrfs]
  [ 6674.416362]  btrfs_scrubparity_helper+0x1aa/0x3b8 [btrfs]
  [ 6674.416379]  btrfs_endio_helper+0xe/0x10 [btrfs]
  [ 6674.416381]  process_one_work+0x276/0x4b6
  [ 6674.416384]  worker_thread+0x1ac/0x266
  [ 6674.416386]  ? rescuer_thread+0x278/0x278
  [ 6674.416387]  kthread+0x106/0x10e
  [ 6674.416389]  ? __list_del_entry+0x22/0x22
  [ 6674.416391]  ret_from_fork+0x27/0x40
  [ 6674.416395] Code: 44 89 e2 be 00 10 00 00 ff 15 b0 ab ef ff eb 72 4d 89 e8 89 d9 44 89 e2 be 00 10 00 00 ff 15 a3 ab ef ff eb 5d 41 83 fc ff 74 02 <0f> 0b 49 63 97
  [ 6674.416432] RIP: __raid_recover_end_io+0x1ac/0x370 [btrfs] RSP: ffffc90001fbbb90
  [ 6674.416434] ---[ end trace 74d56ebe7489dd6a ]---
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>

We can hardcode GFP_NOFS to btrfs_io_bio_alloc, although it means we
change it back from GFP_KERNEL in scrub. I'd rather save a few stack
bytes from not passing the gfp flags in the remaining, more imporatant,
contexts and the bio allocating API now looks more consistent.
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Update direct callers of btrfs_io_bio_alloc that do error handling, that
we can now remove.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The logic of kmalloc and vmalloc fallback is opencoded in
several places, we can now use the existing helper.
Signed-off-by: NDavid Sterba <dsterba@suse.com>