- 25 6月, 2014 1 次提交
-
-
由 Aneesh Kumar K.V 提交于
With guests supporting Multiple page size per segment (MPSS), hpte_page_size returns the actual page size used. Add a new function to return base page size and use that to compare against the the page size calculated from SLB. Without this patch a hpte lookup can fail since we are comparing wrong page size in kvmppc_hv_find_lock_hpte. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 24 6月, 2014 1 次提交
-
-
由 Mihai Caraman 提交于
The patch 08c9a188 kvm: powerpc: use caching attributes as per linux pte do not handle properly the error case, letting mmu_lock locked. The lock will further generate a RCU stall from kvmppc_e500_emul_tlbwe() caller. In case of an error go to out label. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 12 6月, 2014 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull virtio updates from Rusty Russell: "Main excitement is a virtio_scsi fix for alloc holding spinlock on the abort path, which I refuse to CC stable since (1) I discovered it myself, and (2) it's been there forever with no reports" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_scsi: don't call virtqueue_add_sgs(... GFP_NOIO) holding spinlock. virtio-rng: fixes for device registration/unregistration virtio-rng: fix boot with virtio-rng device virtio-rng: support multiple virtio-rng devices virtio_ccw: introduce device_lost in virtio_ccw_device virtio: virtio_break_device() to mark all virtqueues broken.
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull vhost infrastructure updates from Michael S. Tsirkin: "This reworks vhost core dropping unnecessary RCU uses in favor of VQ mutexes which are used on fast path anyway. This fixes worst-case latency for users which change the memory mappings a lot. Memory allocation for vhost-net now supports fallback on vmalloc (same as for vhost-scsi) this makes it possible to create the device on systems where memory is very fragmented, with slightly lower performance" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: move memory pointer to VQs vhost: move acked_features to VQs vhost: replace rcu with mutex vhost-net: extend device allocation to vmalloc
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
Pull arch/tile changes from Chris Metcalf: "These mostly just address smaller issues reported to me" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch: tile: kernel: unaligned.c: Cleaning up uninitialized variables drivers/tty/hvc/hvc_tile.c: use PTR_ERR_OR_ZERO replace strict_strto* call with kstrto* tile: Update comments for generic idle conversion tile: cleanup the comment in init_pgprot tile: use BOOTMEM_DEFAULT instead of magic number 0 for reserve_bootmem flags
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull module updates from Rusty Russell: "Most of this is cleaning up various driver sysfs permissions so we can re-add the perm check (we unified the module param and sysfs checks, but the module ones were stronger so we weakened them temporarily). Param parsing gets documented, and also "--" now forces args to be handed to init (and ignored by the kernel). Module NX/RO protections get tightened: we now set them before calling parse_args()" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: set nx before marking module MODULE_STATE_COMING. samples/kobject/: avoid world-writable sysfs files. drivers/hid/hid-picolcd_fb: avoid world-writable sysfs files. drivers/staging/speakup/: avoid world-writable sysfs files. drivers/regulator/virtual: avoid world-writable sysfs files. drivers/scsi/pm8001/pm8001_ctl.c: avoid world-writable sysfs files. drivers/hid/hid-lg4ff.c: avoid world-writable sysfs files. drivers/video/fbdev/sm501fb.c: avoid world-writable sysfs files. drivers/mtd/devices/docg3.c: avoid world-writable sysfs files. speakup: fix incorrect perms on speakup_acntsa.c cpumask.h: silence warning with -Wsign-compare Documentation: Update kernel-parameters.tx param: hand arguments after -- straight to init modpost: Fix resource leak in read_dump()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux由 Linus Torvalds 提交于
Pull thermal management update from Zhang Rui: "Specifics: - fix a bug in Exynos thermal driver, which overwrites the hardware trip point threshold when updating software trigger levels and results in emergency shutdown. From: Tushar Behera. - add thermal sensor support for Armada 375 and 38x SoCs. From Ezequiel Garcia. - add TMU (Thermal Management Unit) support for Exynos5260 and Exynos5420 SoCs. From Naveen Krishna Chatradhi. - add support for the additional digital temperature sensors in the Intel SoCs like Bay Trail. From: Srinivas Pandruvada. - a couple of cleanups and small fixes from Jingoo Han, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven, Jacob Pan, Paul Walmsley and Lan,Tianyu" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (21 commits) thermal: spear: remove unnecessary OOM messages thermal: exynos: remove unnecessary OOM messages thermal: rcar: remove unnecessary OOM messages thermal: armada: Support Armada 380 SoC thermal: armada: Support Armada 375 SoC thermal: armada: Allow to specify an 'inverted readout' sensor thermal: armada: Pass the platform_device to init_sensor() thermal: armada: Add generic infrastructure to handle the sensor thermal: armada: Add infrastructure to support generic formulas thermal: armada: Rename armada_thermal_ops struct thermal/intel_powerclamp: add newer cpu ids thermal: rcar: Use pm_runtime_put() i.s.o. pm_runtime_put_sync() thermal: samsung: Only update available threshold limits Thermal/int3403: Fix thermal hysteresis unit conversion thermal: Intel SoC DTS thermal thermal: samsung: Add TMU support for Exynos5260 SoCs thermal: samsung: Add TMU support for Exynos5420 SoCs thermal: samsung: change base_common to more meaningful base_second thermal: samsung: replace inten_ bit fields with intclr_ thermal: offer Samsung thermal support only when ARCH_EXYNOS is defined ...
-
由 Linus Torvalds 提交于
Merge tag 'pwm/for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "The majority of these changes are cleanups and fixes across all drivers. Redundant error messages are removed and more PWM controllers set the .can_sleep flag to signal that they can't be used in atomic context. Support is added for the Broadcom Kona family of SoCs and the Intel LPSS driver can now probe PCI devices in addition to ACPI devices. Upon shutdown, the pwm-backlight driver will now power off the backlight. It also uses the new descriptor-based GPIO API for more concise GPIO handling. A large chunk of these changes also converts platforms to use the lookup mechanism rather than relying on the global number space to reference PWM devices. This is largely in preparation for more unification and cleanups in future patches. Eventually it will allow the legacy PWM API to be removed" * tag 'pwm/for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (38 commits) pwm: fsl-ftm: set pwm_chip can_sleep flag pwm: ab8500: Fix wrong value shift for disable/enable PWM pwm: samsung: do not set manual update bit in pwm_samsung_config pwm: lp3943: Set pwm_chip can_sleep flag pwm: atmel: set pwm_chip can_sleep flag pwm: mxs: set pwm_chip can_sleep flag pwm: tiehrpwm: inline accessor functions pwm: tiehrpwm: don't build PM related functions when not needed pwm-backlight: retrieve configured PWM period leds: leds-pwm: retrieve configured PWM period ARM: pxa: hx4700: use PWM_LOOKUP to initialize struct pwm_lookup ARM: shmobile: armadillo: use PWM_LOOKUP to initialize struct pwm_lookup ARM: OMAP3: Beagle: use PWM_LOOKUP to initialize struct pwm_lookup pwm: modify PWM_LOOKUP to initialize all struct pwm_lookup members ARM: pxa: hx4700: initialize all the struct pwm_lookup members ARM: OMAP3: Beagle: initialize all the struct pwm_lookup members pwm: renesas-tpu: remove unused struct tpu_pwm_platform_data ARM: shmobile: armadillo: initialize all struct pwm_lookup members pwm: add period and polarity to struct pwm_lookup pwm: twl: Really disable twl6030 PWMs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull part two of ARM SoC updates from Arnd Bergmann: "This is a small follow-up to the larger ARM SoC updates merged last week, almost entirely for the keystone platform. The main change here is to use the new dma-ranges parsing code that came in through Russell's ARM tree. This allows the keystone platform to do cache-coherent DMA and to finally support all the available physical memory when LPAE is enabled. Aside from this, the keystone reset driver has been rewritten, and there is a small bug fix to allow building the orion5x platform again" * tag 'soc2-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: keystone: Drop use of meminfo since its not available anymore ARM: orion5x: fix mvebu_mbus_dt_init call ARM: configs: keystone: enable reset driver support ARM: dts: keystone: update reset node to work with reset driver ARM: keystone: remove redundant reset stuff ARM: keystone: Update the dma offset for non-dt platform devices ARM: keystone: Switch over to coherent memory address space ARM: configs: keystone: add MTD_SPI_NOR (new dependency for M25P80) ARM: configs: keystone: drop CONFIG_COMMON_CLK_DEBUG
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs由 Linus Torvalds 提交于
Pull reiserfs and ext3 changes from Jan Kara: "Big reiserfs cleanup from Jeff, an ext3 deadlock fix, and some small cleanups" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (34 commits) reiserfs: Fix compilation breakage with CONFIG_REISERFS_CHECK ext3: Fix deadlock in data=journal mode when fs is frozen reiserfs: call truncate_setsize under tailpack mutex fs/jbd/revoke.c: replace shift loop by ilog2 reiserfs: remove obsolete __constant_cpu_to_le32 reiserfs: balance_leaf refactor, split up balance_leaf_when_delete reiserfs: balance_leaf refactor, format balance_leaf_finish_node reiserfs: balance_leaf refactor, format balance_leaf_new_nodes_paste reiserfs: balance_leaf refactor, format balance_leaf_paste_right reiserfs: balance_leaf refactor, format balance_leaf_insert_right reiserfs: balance_leaf refactor, format balance_leaf_paste_left reiserfs: balance_leaf refactor, format balance_leaf_insert_left reiserfs: balance_leaf refactor, pull out balance_leaf{left, right, new_nodes, finish_node} reiserfs: balance_leaf refactor, pull out balance_leaf_finish_node_paste reiserfs: balance_leaf refactor pull out balance_leaf_finish_node_insert reiserfs: balance_leaf refactor, pull out balance_leaf_new_nodes_paste reiserfs: balance_leaf refactor, pull out balance_leaf_new_nodes_insert reiserfs: balance_leaf refactor, pull out balance_leaf_paste_right reiserfs: balance_leaf refactor, pull out balance_leaf_insert_right reiserfs: balance_leaf refactor, pull out balance_leaf_paste_left ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs updates from Chris Mason: "The biggest change here is Josef's rework of the btrfs quota accounting, which improves the in-memory tracking of delayed extent operations. I had been working on Btrfs stack usage for a while, mostly because it had become impossible to do long stress runs with slab, lockdep and pagealloc debugging turned on without blowing the stack. Even though you upgraded us to a nice king sized stack, I kept most of the patches. We also have some very hard to find corruption fixes, an awesome sysfs use after free, and the usual assortment of optimizations, cleanups and other fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (80 commits) Btrfs: convert smp_mb__{before,after}_clear_bit Btrfs: fix scrub_print_warning to handle skinny metadata extents Btrfs: make fsync work after cloning into a file Btrfs: use right type to get real comparison Btrfs: don't check nodes for extent items Btrfs: don't release invalid page in btrfs_page_exists_in_range() Btrfs: make sure we retry if page is a retriable exception Btrfs: make sure we retry if we couldn't get the page btrfs: replace EINVAL with EOPNOTSUPP for dev_replace raid56 trivial: fs/btrfs/ioctl.c: fix typo s/substract/subtract/ Btrfs: fix leaf corruption after __btrfs_drop_extents Btrfs: ensure btrfs_prev_leaf doesn't miss 1 item Btrfs: fix clone to deal with holes when NO_HOLES feature is enabled btrfs: free delayed node outside of root->inode_lock btrfs: replace EINVAL with ERANGE for resize when ULLONG_MAX Btrfs: fix transaction leak during fsync call btrfs: Avoid trucating page or punching hole in a already existed hole. Btrfs: update commit root on snapshot creation after orphan cleanup Btrfs: ioctl, don't re-lock extent range when not necessary Btrfs: avoid visiting all extent items when cloning a range ...
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
Pull xfs updates from Dave Chinner: "This update contains: - cleanup removing unused function args - rework of the filestreams allocator to use dentry cache parent lookups - new on-disk free inode btree and optimised inode allocator - various bug fixes - rework of internal attribute API - cleanup of superblock feature bit support to remove historic cruft - more fixes and minor cleanups - added a new directory/attribute geometry abstraction - yet more fixes and minor cleanups" * tag 'xfs-for-linus-3.16-rc1' of git://oss.sgi.com/xfs/xfs: (86 commits) xfs: fix xfs_da_args sparse warning in xfs_readdir xfs: Fix rounding in xfs_alloc_fix_len() xfs: tone down writepage/releasepage WARN_ONs xfs: small cleanup in xfs_lowbit64() xfs: kill xfs_buf_geterror() xfs: xfs_readsb needs to check for magic numbers xfs: block allocation work needs to be kswapd aware xfs: remove redundant geometry information from xfs_da_state xfs: replace attr LBSIZE with xfs_da_geometry xfs: pass xfs_da_args to xfs_attr_leaf_newentsize xfs: use xfs_da_geometry for block size in attr code xfs: remove mp->m_dir_geo from directory logging xfs: reduce direct usage of mp->m_dir_geo xfs: move node entry counts to xfs_da_geometry xfs: convert dir/attr btree threshold to xfs_da_geometry xfs: convert m_dirblksize to xfs_da_geometry xfs: convert m_dirblkfsbs to xfs_da_geometry xfs: convert directory segment limits to xfs_da_geometry xfs: convert directory db conversion to xfs_da_geometry xfs: convert directory dablk conversion to xfs_da_geometry ...
-
- 11 6月, 2014 28 次提交
-
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block layer fixes from Jens Axboe: "Final small batch of fixes to be included before -rc1. Some general cleanups in here as well, but some of the blk-mq fixes we need for the NVMe conversion and/or scsi-mq. The pull request contains: - Support for not merging across a specified "chunk size", if set by the driver. Some NVMe devices perform poorly for IO that crosses such a chunk, so we need to support it generically as part of request merging avoid having to do complicated split logic. From me. - Bump max tag depth to 10Ki tags. Some scsi devices have a huge shared tag space. Before we failed with EINVAL if a too large tag depth was specified, now we truncate it and pass back the actual value. From me. - Various blk-mq rq init fixes from me and others. - A fix for enter on a dying queue for blk-mq from Keith. This is needed to prevent oopsing on hot device removal. - Fixup for blk-mq timer addition from Ming Lei. - Small round of performance fixes for mtip32xx from Sam Bradshaw. - Minor stack leak fix from Rickard Strandqvist. - Two __init annotations from Fabian Frederick" * 'for-linus' of git://git.kernel.dk/linux-block: block: add __init to blkcg_policy_register block: add __init to elv_register block: ensure that bio_add_page() always accepts a page for an empty bio blk-mq: add timer in blk_mq_start_request blk-mq: always initialize request->start_time block: blk-exec.c: Cleaning up local variable address returnd mtip32xx: minor performance enhancements blk-mq: ->timeout should be cleared in blk_mq_rq_ctx_init() blk-mq: don't allow queue entering for a dying queue blk-mq: bump max tag depth to 10K tags block: add blk_rq_set_block_pc() block: add notion of a chunk size for request merging
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD updates from Brian Norris: - refactor m25p80.c driver for use as a general SPI NOR framework for other drivers which may speak to SPI NOR flash without providing full SPI support (i.e., not part of drivers/spi/) - new Freescale QuadSPI driver (utilizing new SPI NOR framework) - updates for the STMicro "FSM" SPI NOR driver - fix sync/flush behavior on mtd_blkdevs - fixup subpage write support on a few NAND drivers - correct the MTD OOB test for odd-sized OOB areas - add BCH-16 support for OMAP NAND - fix warnings and trivial refactoring - utilize new ECC DT bindings in pxa3xx NAND driver - new LPDDR NVM driver - address a few assorted bugs caught by Coverity - add new imx6sx support for GPMI NAND - use a bounce buffer for NAND when non-DMA-able buffers are used * tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits) mtd: gpmi: add gpmi support for imx6sx mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE mtd: bf5xx_nand: use the managed version of kzalloc mtd: pxa3xx_nand: make the driver work on big-endian systems mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error mtd: nand: r852: correct write_buf loop bounds mtd: nand_bbt: handle error case for nand_create_badblock_pattern() mtd: nand_bbt: remove unused variable mtd: maps: sc520cdp: fix warnings mtd: slram: fix unused variable warning mtd: pfow: remove unused variable mtd: lpddr: fix Kconfig dependency, for I/O accessors mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling mtd: nand: Warn the user if the selected ECC strength is too weak mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ? mtd: nand: omap: add support for BCH16_ECC - NAND driver updates mtd: nand: omap: add support for BCH16_ECC - ELM driver updates mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates ...
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md updates from Neil Brown: "Assorted md fixes for 3.16 Mostly performance improvements with a few corner-case bug fixes" * tag 'md/3.16' of git://neil.brown.name/md: raid5: speedup sync_request processing md/raid5: deadlock between retry_aligned_read with barrier io raid5: add an option to avoid copy data from bio to stripe cache md/bitmap: remove confusing code from filemap_get_page. raid5: avoid release list until last reference of the stripe md: md_clear_badblocks should return an error code on failure. md/raid56: Don't perform reads to support writes until stripe is ready. md: refuse to change shape of array if it is active but read-only
-
由 Jan Kara 提交于
There was a bug in debug printout when CONFIG_REISERFS_CHECK was enabled so one of the assertions in do_balan.c didn't compile. Fix it. Fixes: 0080e9f9Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Brian Norris 提交于
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog updates from Wim Van Sebroeck: "This contains: - addition of the Intel MID watchdog - removal of W83697HF and W83697UG drivers (code was merged into w83627hf_wdt driver) - addition of Armada 375/380 SoC support - conversion of imx2_wdt to regmap API and to watchdog core API - lots of other small improvements and fixes" [ Wim was also tagged by gmail as a spammer, but not delayed by days unlike Ben ] * git://www.linux-watchdog.org/linux-watchdog: (25 commits) x86: intel-mid: add watchdog platform code for Merrifield watchdog: add Intel MID watchdog driver support watchdog: sp805: Set watchdog_device->timeout from ->set_timeout() booke/watchdog: refine and clean up the codes watchdog: iop_wdt only builds for mach-iop13xx watchdog: Remove drivers for W83697HF and W83697UG watchdog: w83627hf_wdt: Add early_disable module parameter ARM: mvebu: Add A375/A380 watchdog binding documentation watchdog: orion: Add Armada 375/380 SoC support watchdog: orion: Introduce per-SoC enabled() function watchdog: orion: Introduce per-SoC stop() function watchdog: orion: Remove unneeded atomic access watchdog: orion: Introduce a SoC-specific RSTOUT mapping watchdog: orion: Move the register ioremap'ing to its own function watchdog: xilinx: Make of_device_id array const watchdog: imx2_wdt: convert to watchdog core api watchdog: imx2_wdt: convert to use regmap API. watchdog: imx2_wdt: Sort the header files alphabetically watchdog: ath79_wdt: switch to clk_prepare/clk_disable watchdog: ath79_wdt: avoid spurious restarts on AR934x ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc updates from Ben Herrenschmidt: "Here is the bulk of the powerpc changes for this merge window. It got a bit delayed in part because I wasn't paying attention, and in part because I discovered I had a core PCI change without a PCI maintainer ack in it. Bjorn eventually agreed it was ok to merge it though we'll probably improve it later and I didn't want to rebase to add his ack. There is going to be a bit more next week, essentially fixes that I still want to sort through and test. The biggest item this time is the support to build the ppc64 LE kernel with our new v2 ABI. We previously supported v2 userspace but the kernel itself was a tougher nut to crack. This is now sorted mostly thanks to Anton and Rusty. We also have a fairly big series from Cedric that add support for 64-bit LE zImage boot wrapper. This was made harder by the fact that traditionally our zImage wrapper was always 32-bit, but our new LE toolchains don't really support 32-bit anymore (it's somewhat there but not really "supported") so we didn't want to rely on it. This meant more churn that just endian fixes. This brings some more LE bits as well, such as the ability to run in LE mode without a hypervisor (ie. under OPAL firmware) by doing the right OPAL call to reinitialize the CPU to take HV interrupts in the right mode and the usual pile of endian fixes. There's another series from Gavin adding EEH improvements (one day we *will* have a release with less than 20 EEH patches, I promise!). Another highlight is the support for the "Split core" functionality on P8 by Michael. This allows a P8 core to be split into "sub cores" of 4 threads which allows the subcores to run different guests under KVM (the HW still doesn't support a partition per thread). And then the usual misc bits and fixes ..." [ Further delayed by gmail deciding that BenH is a dirty spammer. Google knows. ] * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits) powerpc/powernv: Add missing include to LPC code selftests/powerpc: Test the THP bug we fixed in the previous commit powerpc/mm: Check paca psize is up to date for huge mappings powerpc/powernv: Pass buffer size to OPAL validate flash call powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC() powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC() powerpc/powernv: Set memory_block_size_bytes to 256MB powerpc: Allow ppc_md platform hook to override memory_block_size_bytes powerpc/powernv: Fix endian issues in memory error handling code powerpc/eeh: Skip eeh sysfs when eeh is disabled powerpc: 64bit sendfile is capped at 2GB powerpc/powernv: Provide debugfs access to the LPC bus via OPAL powerpc/serial: Use saner flags when creating legacy ports powerpc: Add cpu family documentation powerpc/xmon: Fix up xmon format strings powerpc/powernv: Add calls to support little endian host powerpc: Document sysfs DSCR interface powerpc: Fix regression of per-CPU DSCR setting powerpc: Split __SYSFS_SPRSETUP macro arch: powerpc/fadump: Cleaning up inconsistent NULL checks ...
-
git://cavan.codon.org.uk/platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform driver updates from Matthew Garrett: "Very little of excitement here - the most significant is a new driver for detecting device freefall on Dells, other than that it's pretty much entirely minor fixes for specific machines" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: hp-wmi: Enable hotkeys on some systems thinkpad_acpi: Add mappings for F9 - F12 hotkeys on X240 / T440 / T540 platform: x86: dell-smo8800: Dell Latitude freefall driver (ACPI SMO8800/SMO8810) ideapad_laptop: Introduce the use of the managed version of kzalloc platform/x86: Fix run-time dependencies of OLPC drivers platform: x86: asus-wmi.c: Cleaning up uninitialized variables ix86/mid/thermal: Introduce the use of the managed version of kzalloc platform x86 Kconfig: Refer to the laptop list in the Compal driver help Documentation: Add list of laptop models supported by the Compal driver ideapad-laptop: Blacklist rfkill control on the Lenovo Yoga 2 11 asus-wmi: Set WAPF to 4 for Asus X550CA alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status alienware-wmi: Update WMAX brightness method limit to 15 pvpanic: Set high notifier priority platform/x86: samsung-laptop: Add support for Samsung's NP7[34]0U3E models. toshiba_acpi: Add alternative keymap support for Satellite M840 platform-drivers-x86: intel_pmic_gpio: Fix off-by-one valid offset range check
-
由 Kyle Evans 提交于
This is a third attempt to enable these buttons. The new variable being commit 997daa1b (i.e. hp-wmi: detect "2009 BIOS or later"). Older systems that do not have the 2009 BIOS query method respond with a dummy value, in this case 4. Using that, we can target a fairly narrow group of systems. i.e. old enough to not have HPWMI_FEATURE_QUERY 0xd, but new enough to have HPWMI_BIOS_QUERY 0x9. This group may be further limited if some systems respond with something other than 4 to non-existant feature queries. Signed-off-by: NKyle Evans <kvans32@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Hans de Goede 提交于
The T440s user guide says that when Fn-lock is not active, the *40s' F9 - F12 keys should be mapped to: control-panel, search, show-all-windows and Computer. These keys generate the sofar unused 28 - 31 hotkey scancodes. For the first 2 this nicely matches the icons on the keys, for the latter 2 the icons are somewhat creative, which is why I ended up looking them up in the user manual. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Pali Rohár 提交于
This acpi driver provide supports for freefall sensors SMO8800/SMO8810 which can be found on Dell Latitude laptops. Driver register /dev/freefall misc device which has same interface as driver hp_accel freefall driver. So any existing applications for HP freefall sensor /dev/freefall will work for with this new driver for Dell Latitude laptops too. Signed-off-by: NPali Rohár <pali.rohar@gmail.com> Cc: Sonal Santan <sonal.santan@gmail.com> Tested-By: NValdis Kletnieks <valdis.kletnieks@vt.edu> Acked-By: NValdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Himangi Saraogi 提交于
This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. The label sysfs_failed is removed as it is no longer required. Also, linux/device.h is added to make sure the devm_*() routine declarations are unambiguously available. The following Coccinelle semantic patch was used for making the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by: NHimangi Saraogi <himangi774@gmail.com> Acked-by: NJulia Lawall <julia.lawall@lip6.fr> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Jean Delvare 提交于
Let the xo15-ebook driver depend on OLPC as all other OLPC drivers already do. Add COMPILE_TEST as an alternative for both xo1-rfkill and xo15-ebook, to increase the build testing coverage. Signed-off-by: NJean Delvare <jdelvare@suse.de> Cc: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Rickard Strandqvist 提交于
There is a risk that the variable will be used without being initialized. This was largely found by using a static code analysis program called cppcheck. Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Himangi Saraogi 提交于
This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. The following Coccinelle semantic patch was used for making the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by: NHimangi Saraogi <himangi774@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Ismael Luceno 提交于
Signed-off-by: NIsmael Luceno <ismael.luceno@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Ismael Luceno 提交于
Signed-off-by: NIsmael Luceno <ismael.luceno@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Hans de Goede 提交于
The Lenovo Yoga 2 11 always reports everything as blocked, causing userspace to not even try to use the wlan / bluetooth even though they work fine. Note this patch also removes the "else priv->rfk[i] = NULL;" bit of the rfkill initialization, it is not necessary as the priv struct is allocated with kzalloc. Reported-and-tested-by: NVincent Gerris <vgerris@gmail.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Andreas Utterberg 提交于
The 'asus-nb-wmi' WAPF parameter must be set to 4, so the internal Wireless LAN device is operational. Signed-off-by: NAndreas Utterberg <andreas.utterberg@thundera.se> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mario Limonciello 提交于
Since there are now multiple HDMI attributes associated with the WMAX method, create a sysfs group for them instead. Signed-off-by: NMario Limonciello <mario_limonciello@dell.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Linus Torvalds 提交于
Merge leftovers from Andrew Morton: "A few leftovers: ocfs2, gcov, RTC" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: rtc: s5m: consolidate two device type switch statements rtc: s5m: add support for S2MPS14 RTC rtc: s5m: support different register layout rtc: s5m: use shorter time of register update rtc: s5m: remove undocumented time init on first boot mfd/rtc: sec/s5m: rename SEC* symbols to S5M gcov: add support for GCC 4.9 ocfs2/o2net: incorrect to terminate accepting connections loop upon rejecting an invalid one
-
由 Krzysztof Kozlowski 提交于
In probe the configuration of driver for different chipsets was done in two switch (pdata->device_type) statements. Consolidate them into one switch statement to increase code readability. Additionally check the return value of regmap_irq_get_virq and exit probe on error. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Kozlowski 提交于
Add support for S2MPS14 to the rtc-s5m driver. Differences in S2MPS14 (in comparison to S5M8767): - Layout of registers - Lack of century support for time and alarms (7 registers used for storing time/alarm) - Two buffer control registers: WUDR and RUDR - No register for enabling writing time - RTC interrupts are reported in main PMIC I2C device Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Kozlowski 提交于
Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver: 1. Add a map of registers used by the driver which differ between the chipsets (S5M876X and S2MPS14). 2. Move code of checking for alarm pending to separate function. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Kozlowski 提交于
Set the time needed for updating alarm and time registers to 0.45 ms. The default is 7.32 ms which is too long and leads to warnings when setting alarm or time: s5m-rtc: waiting for UDR update, reached max number of retries Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Kozlowski 提交于
Remove the code for initializing time if this is first boot. The code for detecting first boot uses undocumented field RTC_TCON in RTC_UDR_CON register. According to S5M8767's datasheet this field is reserved. On S2MPS14 it is not documented at all. On device first boot the registers will be initialized with reset value (2000-01-01 00:00:00). The code might work on S5M8763 but still this does not look like a task for RTC driver. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Kozlowski 提交于
Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver: 1. Rename SEC* symbols to S5M. 2. Add S5M prefix to some of defines which are different between S5M876X and S2MPS14. This is only a rename-like patch, new code is not added. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: NLee Jones <lee.jones@linaro.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yuan Pengfei 提交于
This patch handles the gcov-related changes in GCC 4.9: A new counter (time profile) is added. The total number is 9 now. A new profile merge function __gcov_merge_time_profile is added. See gcc/gcov-io.h and libgcc/libgcov-merge.c For the first change, the layout of struct gcov_info is affected. For the second one, a dummy function is added to kernel/gcov/base.c similarly. Signed-off-by: NYuan Pengfei <coolypf@qq.com> Acked-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-