提交 2937f5ef 编写于 作者: L Linus Torvalds

Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86

Pull x86 platform driver updates from Matthew Garrett:
 "Very little of excitement here - the most significant is a new driver
  for detecting device freefall on Dells, other than that it's pretty
  much entirely minor fixes for specific machines"

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
  hp-wmi: Enable hotkeys on some systems
  thinkpad_acpi: Add mappings for F9 - F12 hotkeys on X240 / T440 / T540
  platform: x86: dell-smo8800: Dell Latitude freefall driver (ACPI SMO8800/SMO8810)
  ideapad_laptop: Introduce the use of the managed version of kzalloc
  platform/x86: Fix run-time dependencies of OLPC drivers
  platform: x86: asus-wmi.c: Cleaning up uninitialized variables
  ix86/mid/thermal: Introduce the use of the managed version of kzalloc
  platform x86 Kconfig: Refer to the laptop list in the Compal driver help
  Documentation: Add list of laptop models supported by the Compal driver
  ideapad-laptop: Blacklist rfkill control on the Lenovo Yoga 2 11
  asus-wmi: Set WAPF to 4 for Asus X550CA
  alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status
  alienware-wmi: Update WMAX brightness method limit to 15
  pvpanic: Set high notifier priority
  platform/x86: samsung-laptop: Add support for Samsung's NP7[34]0U3E models.
  toshiba_acpi: Add alternative keymap support for Satellite M840
  platform-drivers-x86: intel_pmic_gpio: Fix off-by-one valid offset range check
compal-laptop
=============
List of supported hardware:
by Compal:
Compal FL90/IFL90
Compal FL91/IFL91
Compal FL92/JFL92
Compal FT00/IFT00
by Dell:
Dell Vostro 1200
Dell Mini 9 (Inspiron 910)
Dell Mini 10 (Inspiron 1010)
Dell Mini 10v (Inspiron 1011)
Dell Mini 1012 (Inspiron 1012)
Dell Inspiron 11z (Inspiron 1110)
Dell Mini 12 (Inspiron 1210)
......@@ -102,7 +102,7 @@ config DELL_LAPTOP
default n
---help---
This driver adds support for rfkill and backlight control to Dell
laptops.
laptops (except for some models covered by the Compal driver).
config DELL_WMI
tristate "Dell WMI extras"
......@@ -127,6 +127,16 @@ config DELL_WMI_AIO
To compile this driver as a module, choose M here: the module will
be called dell-wmi-aio.
config DELL_SMO8800
tristate "Dell Latitude freefall driver (ACPI SMO8800/SMO8810)"
depends on ACPI
---help---
Say Y here if you want to support SMO8800/SMO8810 freefall device
on Dell Latitude laptops.
To compile this driver as a module, choose M here: the module will
be called dell-smo8800.
config FUJITSU_LAPTOP
tristate "Fujitsu Laptop Extras"
......@@ -265,23 +275,21 @@ config PANASONIC_LAPTOP
R2, R3, R5, T2, W2 and Y2 series), say Y.
config COMPAL_LAPTOP
tristate "Compal Laptop Extras"
tristate "Compal (and others) Laptop Extras"
depends on ACPI
depends on BACKLIGHT_CLASS_DEVICE
depends on RFKILL
depends on HWMON
depends on POWER_SUPPLY
---help---
This is a driver for laptops built by Compal:
Compal FL90/IFL90
Compal FL91/IFL91
Compal FL92/JFL92
Compal FT00/IFT00
This is a driver for laptops built by Compal, and some models by
other brands (e.g. Dell, Toshiba).
It adds support for Bluetooth, WLAN and LCD brightness control.
It adds support for rfkill, Bluetooth, WLAN and LCD brightness
control.
If you have an Compal FL9x/IFL9x/FT00 laptop, say Y or M here.
For a (possibly incomplete) list of supported laptops, please refer
to: Documentation/platform/x86-laptop-drivers.txt
config SONY_LAPTOP
tristate "Sony Laptop Extras"
......@@ -724,7 +732,7 @@ config IBM_RTL
config XO1_RFKILL
tristate "OLPC XO-1 software RF kill switch"
depends on OLPC
depends on OLPC || COMPILE_TEST
depends on RFKILL
---help---
Support for enabling/disabling the WLAN interface on the OLPC XO-1
......@@ -732,6 +740,7 @@ config XO1_RFKILL
config XO15_EBOOK
tristate "OLPC XO-1.5 ebook switch"
depends on OLPC || COMPILE_TEST
depends on ACPI && INPUT
---help---
Support for the ebook switch on the OLPC XO-1.5 laptop.
......
......@@ -13,6 +13,7 @@ obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o
obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_DELL_WMI) += dell-wmi.o
obj-$(CONFIG_DELL_WMI_AIO) += dell-wmi-aio.o
obj-$(CONFIG_DELL_SMO8800) += dell-smo8800.o
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
obj-$(CONFIG_ACERHDF) += acerhdf.o
obj-$(CONFIG_HP_ACCEL) += hp_accel.o
......
......@@ -32,6 +32,7 @@
#define WMAX_METHOD_HDMI_STATUS 0x2
#define WMAX_METHOD_BRIGHTNESS 0x3
#define WMAX_METHOD_ZONE_CONTROL 0x4
#define WMAX_METHOD_HDMI_CABLE 0x5
MODULE_AUTHOR("Mario Limonciello <mario_limonciello@dell.com>");
MODULE_DESCRIPTION("Alienware special feature control");
......@@ -350,12 +351,11 @@ static int alienware_zone_init(struct platform_device *dev)
char *name;
if (interface == WMAX) {
global_led.max_brightness = 100;
lighting_control_state = WMAX_RUNNING;
} else if (interface == LEGACY) {
global_led.max_brightness = 0x0F;
lighting_control_state = LEGACY_RUNNING;
}
global_led.max_brightness = 0x0F;
global_brightness = global_led.max_brightness;
/*
......@@ -423,41 +423,85 @@ static void alienware_zone_exit(struct platform_device *dev)
The HDMI mux sysfs node indicates the status of the HDMI input mux.
It can toggle between standard system GPU output and HDMI input.
*/
static ssize_t show_hdmi(struct device *dev, struct device_attribute *attr,
char *buf)
static acpi_status alienware_hdmi_command(struct hdmi_args *in_args,
u32 command, int *out_data)
{
acpi_status status;
struct acpi_buffer input;
union acpi_object *obj;
u32 tmp = 0;
struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_buffer input;
struct acpi_buffer output;
input.length = (acpi_size) sizeof(*in_args);
input.pointer = in_args;
if (out_data != NULL) {
output.length = ACPI_ALLOCATE_BUFFER;
output.pointer = NULL;
status = wmi_evaluate_method(WMAX_CONTROL_GUID, 1,
command, &input, &output);
} else
status = wmi_evaluate_method(WMAX_CONTROL_GUID, 1,
command, &input, NULL);
if (ACPI_SUCCESS(status) && out_data != NULL) {
obj = (union acpi_object *)output.pointer;
if (obj && obj->type == ACPI_TYPE_INTEGER)
*out_data = (u32) obj->integer.value;
}
return status;
}
static ssize_t show_hdmi_cable(struct device *dev,
struct device_attribute *attr, char *buf)
{
acpi_status status;
u32 out_data;
struct hdmi_args in_args = {
.arg = 0,
};
input.length = (acpi_size) sizeof(in_args);
input.pointer = &in_args;
status = wmi_evaluate_method(WMAX_CONTROL_GUID, 1,
WMAX_METHOD_HDMI_STATUS, &input, &output);
status =
alienware_hdmi_command(&in_args, WMAX_METHOD_HDMI_CABLE,
(u32 *) &out_data);
if (ACPI_SUCCESS(status)) {
if (out_data == 0)
return scnprintf(buf, PAGE_SIZE,
"[unconnected] connected unknown\n");
else if (out_data == 1)
return scnprintf(buf, PAGE_SIZE,
"unconnected [connected] unknown\n");
}
pr_err("alienware-wmi: unknown HDMI cable status: %d\n", status);
return scnprintf(buf, PAGE_SIZE, "unconnected connected [unknown]\n");
}
static ssize_t show_hdmi_source(struct device *dev,
struct device_attribute *attr, char *buf)
{
acpi_status status;
u32 out_data;
struct hdmi_args in_args = {
.arg = 0,
};
status =
alienware_hdmi_command(&in_args, WMAX_METHOD_HDMI_STATUS,
(u32 *) &out_data);
if (ACPI_SUCCESS(status)) {
obj = (union acpi_object *)output.pointer;
if (obj && obj->type == ACPI_TYPE_INTEGER)
tmp = (u32) obj->integer.value;
if (tmp == 1)
if (out_data == 1)
return scnprintf(buf, PAGE_SIZE,
"[input] gpu unknown\n");
else if (tmp == 2)
else if (out_data == 2)
return scnprintf(buf, PAGE_SIZE,
"input [gpu] unknown\n");
}
pr_err("alienware-wmi: unknown HDMI status: %d\n", status);
pr_err("alienware-wmi: unknown HDMI source status: %d\n", out_data);
return scnprintf(buf, PAGE_SIZE, "input gpu [unknown]\n");
}
static ssize_t toggle_hdmi(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
static ssize_t toggle_hdmi_source(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct acpi_buffer input;
acpi_status status;
struct hdmi_args args;
if (strcmp(buf, "gpu\n") == 0)
......@@ -467,33 +511,46 @@ static ssize_t toggle_hdmi(struct device *dev, struct device_attribute *attr,
else
args.arg = 3;
pr_debug("alienware-wmi: setting hdmi to %d : %s", args.arg, buf);
input.length = (acpi_size) sizeof(args);
input.pointer = &args;
status = wmi_evaluate_method(WMAX_CONTROL_GUID, 1,
WMAX_METHOD_HDMI_SOURCE, &input, NULL);
status = alienware_hdmi_command(&args, WMAX_METHOD_HDMI_SOURCE, NULL);
if (ACPI_FAILURE(status))
pr_err("alienware-wmi: HDMI toggle failed: results: %u\n",
status);
return count;
}
static DEVICE_ATTR(hdmi, S_IRUGO | S_IWUSR, show_hdmi, toggle_hdmi);
static DEVICE_ATTR(cable, S_IRUGO, show_hdmi_cable, NULL);
static DEVICE_ATTR(source, S_IRUGO | S_IWUSR, show_hdmi_source,
toggle_hdmi_source);
static struct attribute *hdmi_attrs[] = {
&dev_attr_cable.attr,
&dev_attr_source.attr,
NULL,
};
static void remove_hdmi(struct platform_device *device)
static struct attribute_group hdmi_attribute_group = {
.name = "hdmi",
.attrs = hdmi_attrs,
};
static void remove_hdmi(struct platform_device *dev)
{
device_remove_file(&device->dev, &dev_attr_hdmi);
sysfs_remove_group(&dev->dev.kobj, &hdmi_attribute_group);
}
static int create_hdmi(void)
static int create_hdmi(struct platform_device *dev)
{
int ret = -ENOMEM;
ret = device_create_file(&platform_device->dev, &dev_attr_hdmi);
int ret;
ret = sysfs_create_group(&dev->dev.kobj, &hdmi_attribute_group);
if (ret)
goto error_create_hdmi;
return 0;
error_create_hdmi:
remove_hdmi(platform_device);
remove_hdmi(dev);
return ret;
}
......@@ -527,7 +584,7 @@ static int __init alienware_wmi_init(void)
goto fail_platform_device2;
if (interface == WMAX) {
ret = create_hdmi();
ret = create_hdmi(platform_device);
if (ret)
goto fail_prep_hdmi;
}
......
......@@ -135,6 +135,15 @@ static struct dmi_system_id asus_quirks[] = {
},
.driver_data = &quirk_asus_x401u,
},
{
.callback = dmi_matched,
.ident = "ASUSTeK COMPUTER INC. X550CA",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X550CA"),
},
.driver_data = &quirk_asus_x401u,
},
{
.callback = dmi_matched,
.ident = "ASUSTeK COMPUTER INC. X55A",
......
......@@ -266,7 +266,7 @@ static int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1,
struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
acpi_status status;
union acpi_object *obj;
u32 tmp;
u32 tmp = 0;
status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 1, method_id,
&input, &output);
......@@ -277,8 +277,6 @@ static int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1,
obj = (union acpi_object *)output.pointer;
if (obj && obj->type == ACPI_TYPE_INTEGER)
tmp = (u32) obj->integer.value;
else
tmp = 0;
if (retval)
*retval = tmp;
......
/*
* dell-smo8800.c - Dell Latitude ACPI SMO8800/SMO8810 freefall sensor driver
*
* Copyright (C) 2012 Sonal Santan <sonal.santan@gmail.com>
* Copyright (C) 2014 Pali Rohár <pali.rohar@gmail.com>
*
* This is loosely based on lis3lv02d driver.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#define DRIVER_NAME "smo8800"
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/interrupt.h>
#include <linux/miscdevice.h>
struct smo8800_device {
u32 irq; /* acpi device irq */
atomic_t counter; /* count after last read */
struct miscdevice miscdev; /* for /dev/freefall */
unsigned long misc_opened; /* whether the device is open */
wait_queue_head_t misc_wait; /* Wait queue for the misc dev */
struct device *dev; /* acpi device */
};
static irqreturn_t smo8800_interrupt_quick(int irq, void *data)
{
struct smo8800_device *smo8800 = data;
atomic_inc(&smo8800->counter);
wake_up_interruptible(&smo8800->misc_wait);
return IRQ_WAKE_THREAD;
}
static irqreturn_t smo8800_interrupt_thread(int irq, void *data)
{
struct smo8800_device *smo8800 = data;
dev_info(smo8800->dev, "detected free fall\n");
return IRQ_HANDLED;
}
static acpi_status smo8800_get_resource(struct acpi_resource *resource,
void *context)
{
struct acpi_resource_extended_irq *irq;
if (resource->type != ACPI_RESOURCE_TYPE_EXTENDED_IRQ)
return AE_OK;
irq = &resource->data.extended_irq;
if (!irq || !irq->interrupt_count)
return AE_OK;
*((u32 *)context) = irq->interrupts[0];
return AE_CTRL_TERMINATE;
}
static u32 smo8800_get_irq(struct acpi_device *device)
{
u32 irq = 0;
acpi_status status;
status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
smo8800_get_resource, &irq);
if (ACPI_FAILURE(status)) {
dev_err(&device->dev, "acpi_walk_resources failed\n");
return 0;
}
return irq;
}
static ssize_t smo8800_misc_read(struct file *file, char __user *buf,
size_t count, loff_t *pos)
{
struct smo8800_device *smo8800 = container_of(file->private_data,
struct smo8800_device, miscdev);
u32 data = 0;
unsigned char byte_data = 0;
ssize_t retval = 1;
if (count < 1)
return -EINVAL;
atomic_set(&smo8800->counter, 0);
retval = wait_event_interruptible(smo8800->misc_wait,
(data = atomic_xchg(&smo8800->counter, 0)));
if (retval)
return retval;
byte_data = 1;
retval = 1;
if (data < 255)
byte_data = data;
else
byte_data = 255;
if (put_user(byte_data, buf))
retval = -EFAULT;
return retval;
}
static int smo8800_misc_open(struct inode *inode, struct file *file)
{
struct smo8800_device *smo8800 = container_of(file->private_data,
struct smo8800_device, miscdev);
if (test_and_set_bit(0, &smo8800->misc_opened))
return -EBUSY; /* already open */
atomic_set(&smo8800->counter, 0);
return 0;
}
static int smo8800_misc_release(struct inode *inode, struct file *file)
{
struct smo8800_device *smo8800 = container_of(file->private_data,
struct smo8800_device, miscdev);
clear_bit(0, &smo8800->misc_opened); /* release the device */
return 0;
}
static const struct file_operations smo8800_misc_fops = {
.owner = THIS_MODULE,
.read = smo8800_misc_read,
.open = smo8800_misc_open,
.release = smo8800_misc_release,
};
static int smo8800_add(struct acpi_device *device)
{
int err;
struct smo8800_device *smo8800;
smo8800 = devm_kzalloc(&device->dev, sizeof(*smo8800), GFP_KERNEL);
if (!smo8800) {
dev_err(&device->dev, "failed to allocate device data\n");
return -ENOMEM;
}
smo8800->dev = &device->dev;
smo8800->miscdev.minor = MISC_DYNAMIC_MINOR;
smo8800->miscdev.name = "freefall";
smo8800->miscdev.fops = &smo8800_misc_fops;
init_waitqueue_head(&smo8800->misc_wait);
err = misc_register(&smo8800->miscdev);
if (err) {
dev_err(&device->dev, "failed to register misc dev: %d\n", err);
return err;
}
device->driver_data = smo8800;
smo8800->irq = smo8800_get_irq(device);
if (!smo8800->irq) {
dev_err(&device->dev, "failed to obtain IRQ\n");
err = -EINVAL;
goto error;
}
err = request_threaded_irq(smo8800->irq, smo8800_interrupt_quick,
smo8800_interrupt_thread,
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
DRIVER_NAME, smo8800);
if (err) {
dev_err(&device->dev,
"failed to request thread for IRQ %d: %d\n",
smo8800->irq, err);
goto error;
}
dev_dbg(&device->dev, "device /dev/freefall registered with IRQ %d\n",
smo8800->irq);
return 0;
error:
misc_deregister(&smo8800->miscdev);
return err;
}
static int smo8800_remove(struct acpi_device *device)
{
struct smo8800_device *smo8800 = device->driver_data;
free_irq(smo8800->irq, smo8800);
misc_deregister(&smo8800->miscdev);
dev_dbg(&device->dev, "device /dev/freefall unregistered\n");
return 0;
}
static const struct acpi_device_id smo8800_ids[] = {
{ "SMO8800", 0 },
{ "SMO8810", 0 },
{ "", 0 },
};
MODULE_DEVICE_TABLE(acpi, smo8800_ids);
static struct acpi_driver smo8800_driver = {
.name = DRIVER_NAME,
.class = "Latitude",
.ids = smo8800_ids,
.ops = {
.add = smo8800_add,
.remove = smo8800_remove,
},
.owner = THIS_MODULE,
};
module_acpi_driver(smo8800_driver);
MODULE_DESCRIPTION("Dell Latitude freefall driver (ACPI SMO8800/SMO8810)");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Sonal Santan, Pali Rohár");
......@@ -53,6 +53,7 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
#define HPWMI_ALS_QUERY 0x3
#define HPWMI_HARDWARE_QUERY 0x4
#define HPWMI_WIRELESS_QUERY 0x5
#define HPWMI_BIOS_QUERY 0x9
#define HPWMI_HOTKEY_QUERY 0xc
#define HPWMI_FEATURE_QUERY 0xd
#define HPWMI_WIRELESS2_QUERY 0x1b
......@@ -144,6 +145,7 @@ static const struct key_entry hp_wmi_keymap[] = {
{ KE_KEY, 0x2142, { KEY_MEDIA } },
{ KE_KEY, 0x213b, { KEY_INFO } },
{ KE_KEY, 0x2169, { KEY_DIRECTION } },
{ KE_KEY, 0x216a, { KEY_SETUP } },
{ KE_KEY, 0x231b, { KEY_HELP } },
{ KE_END, 0 }
};
......@@ -304,6 +306,19 @@ static int hp_wmi_bios_2009_later(void)
return (state & 0x10) ? 1 : 0;
}
static int hp_wmi_enable_hotkeys(void)
{
int ret;
int query = 0x6e;
ret = hp_wmi_perform_query(HPWMI_BIOS_QUERY, 1, &query, sizeof(query),
0);
if (ret)
return -EINVAL;
return 0;
}
static int hp_wmi_set_block(void *data, bool blocked)
{
enum hp_wmi_radio r = (enum hp_wmi_radio) data;
......@@ -648,6 +663,9 @@ static int __init hp_wmi_input_setup(void)
hp_wmi_tablet_state());
input_sync(hp_wmi_input_dev);
if (hp_wmi_bios_2009_later() == 4)
hp_wmi_enable_hotkeys();
status = wmi_install_notify_handler(HPWMI_EVENT_GUID, hp_wmi_notify, NULL);
if (ACPI_FAILURE(status)) {
err = -EIO;
......
......@@ -36,6 +36,8 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/i8042.h>
#include <linux/dmi.h>
#include <linux/device.h>
#define IDEAPAD_RFKILL_DEV_NUM (3)
......@@ -819,6 +821,19 @@ static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data)
}
}
/* Blacklist for devices where the ideapad rfkill interface does not work */
static struct dmi_system_id rfkill_blacklist[] = {
/* The Lenovo Yoga 2 11 always reports everything as blocked */
{
.ident = "Lenovo Yoga 2 11",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 2 11"),
},
},
{}
};
static int ideapad_acpi_add(struct platform_device *pdev)
{
int ret, i;
......@@ -833,7 +848,7 @@ static int ideapad_acpi_add(struct platform_device *pdev)
if (read_method_int(adev->handle, "_CFG", &cfg))
return -ENODEV;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
......@@ -844,7 +859,7 @@ static int ideapad_acpi_add(struct platform_device *pdev)
ret = ideapad_sysfs_init(priv);
if (ret)
goto sysfs_failed;
return ret;
ret = ideapad_debugfs_init(priv);
if (ret)
......@@ -854,11 +869,10 @@ static int ideapad_acpi_add(struct platform_device *pdev)
if (ret)
goto input_failed;
for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) {
if (test_bit(ideapad_rfk_data[i].cfgbit, &priv->cfg))
ideapad_register_rfkill(priv, i);
else
priv->rfk[i] = NULL;
if (!dmi_check_system(rfkill_blacklist)) {
for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
if (test_bit(ideapad_rfk_data[i].cfgbit, &priv->cfg))
ideapad_register_rfkill(priv, i);
}
ideapad_sync_rfk_state(priv);
ideapad_sync_touchpad_state(priv);
......@@ -884,8 +898,6 @@ static int ideapad_acpi_add(struct platform_device *pdev)
ideapad_debugfs_exit(priv);
debugfs_failed:
ideapad_sysfs_exit(priv);
sysfs_failed:
kfree(priv);
return ret;
}
......@@ -903,7 +915,6 @@ static int ideapad_acpi_remove(struct platform_device *pdev)
ideapad_debugfs_exit(priv);
ideapad_sysfs_exit(priv);
dev_set_drvdata(&pdev->dev, NULL);
kfree(priv);
return 0;
}
......
......@@ -481,7 +481,8 @@ static int mid_thermal_probe(struct platform_device *pdev)
int i;
struct platform_info *pinfo;
pinfo = kzalloc(sizeof(struct platform_info), GFP_KERNEL);
pinfo = devm_kzalloc(&pdev->dev, sizeof(struct platform_info),
GFP_KERNEL);
if (!pinfo)
return -ENOMEM;
......@@ -489,7 +490,6 @@ static int mid_thermal_probe(struct platform_device *pdev)
ret = mid_initialize_adc(&pdev->dev);
if (ret) {
dev_err(&pdev->dev, "ADC init failed");
kfree(pinfo);
return ret;
}
......@@ -520,7 +520,6 @@ static int mid_thermal_probe(struct platform_device *pdev)
thermal_zone_device_unregister(pinfo->tzd[i]);
}
configure_adc(0);
kfree(pinfo);
return ret;
}
......@@ -541,8 +540,6 @@ static int mid_thermal_remove(struct platform_device *pdev)
thermal_zone_device_unregister(pinfo->tzd[i]);
}
kfree(pinfo);
/* Stop the ADC */
return configure_adc(0);
}
......
......@@ -91,7 +91,7 @@ static void pmic_program_irqtype(int gpio, int type)
static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
if (offset > 8) {
if (offset >= 8) {
pr_err("only pin 0-7 support input\n");
return -1;/* we only have 8 GPIO can use as input */
}
......@@ -130,7 +130,7 @@ static int pmic_gpio_get(struct gpio_chip *chip, unsigned offset)
int ret;
/* we only have 8 GPIO pins we can use as input */
if (offset > 8)
if (offset >= 8)
return -EOPNOTSUPP;
ret = intel_scu_ipc_ioread8(GPIO0 + offset, &r);
if (ret < 0)
......
......@@ -70,6 +70,7 @@ pvpanic_panic_notify(struct notifier_block *nb, unsigned long code,
static struct notifier_block pvpanic_panic_nb = {
.notifier_call = pvpanic_panic_notify,
.priority = 1, /* let this called before broken drm_fb_helper */
};
......
......@@ -27,6 +27,7 @@
#include <linux/debugfs.h>
#include <linux/ctype.h>
#include <linux/efi.h>
#include <linux/suspend.h>
#include <acpi/video.h>
/*
......@@ -340,6 +341,8 @@ struct samsung_laptop {
struct samsung_laptop_debug debug;
struct samsung_quirks *quirks;
struct notifier_block pm_nb;
bool handle_backlight;
bool has_stepping_quirk;
......@@ -348,6 +351,8 @@ struct samsung_laptop {
struct samsung_quirks {
bool broken_acpi_video;
bool four_kbd_backlight_levels;
bool enable_kbd_backlight;
};
static struct samsung_quirks samsung_unknown = {};
......@@ -356,6 +361,11 @@ static struct samsung_quirks samsung_broken_acpi_video = {
.broken_acpi_video = true,
};
static struct samsung_quirks samsung_np740u3e = {
.four_kbd_backlight_levels = true,
.enable_kbd_backlight = true,
};
static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force,
......@@ -1051,6 +1061,8 @@ static int __init samsung_leds_init(struct samsung_laptop *samsung)
samsung->kbd_led.brightness_set = kbd_led_set;
samsung->kbd_led.brightness_get = kbd_led_get;
samsung->kbd_led.max_brightness = 8;
if (samsung->quirks->four_kbd_backlight_levels)
samsung->kbd_led.max_brightness = 4;
ret = led_classdev_register(&samsung->platform_device->dev,
&samsung->kbd_led);
......@@ -1414,6 +1426,19 @@ static void samsung_platform_exit(struct samsung_laptop *samsung)
}
}
static int samsung_pm_notification(struct notifier_block *nb,
unsigned long val, void *ptr)
{
struct samsung_laptop *samsung;
samsung = container_of(nb, struct samsung_laptop, pm_nb);
if (val == PM_POST_HIBERNATION &&
samsung->quirks->enable_kbd_backlight)
kbd_backlight_enable(samsung);
return 0;
}
static int __init samsung_platform_init(struct samsung_laptop *samsung)
{
struct platform_device *pdev;
......@@ -1534,6 +1559,15 @@ static struct dmi_system_id __initdata samsung_dmi_table[] = {
},
.driver_data = &samsung_broken_acpi_video,
},
{
.callback = samsung_dmi_matched,
.ident = "730U3E/740U3E",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "730U3E/740U3E"),
},
.driver_data = &samsung_np740u3e,
},
{ },
};
MODULE_DEVICE_TABLE(dmi, samsung_dmi_table);
......@@ -1608,6 +1642,9 @@ static int __init samsung_init(void)
if (ret)
goto error_debugfs;
samsung->pm_nb.notifier_call = samsung_pm_notification;
register_pm_notifier(&samsung->pm_nb);
samsung_platform_device = samsung->platform_device;
return ret;
......@@ -1633,6 +1670,7 @@ static void __exit samsung_exit(void)
struct samsung_laptop *samsung;
samsung = platform_get_drvdata(samsung_platform_device);
unregister_pm_notifier(&samsung->pm_nb);
samsung_debugfs_exit(samsung);
samsung_leds_exit(samsung);
......
......@@ -3171,8 +3171,10 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
KEY_MICMUTE, /* 0x1a: Mic mute (since ?400 or so) */
/* (assignments unknown, please report if found) */
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
KEY_UNKNOWN,
/* Extra keys in use since the X240 / T440 / T540 */
KEY_CONFIG, KEY_SEARCH, KEY_SCALE, KEY_COMPUTER,
},
};
......
......@@ -56,6 +56,7 @@
#include <linux/workqueue.h>
#include <linux/i8042.h>
#include <linux/acpi.h>
#include <linux/dmi.h>
#include <asm/uaccess.h>
MODULE_AUTHOR("John Belmonte");
......@@ -213,6 +214,30 @@ static const struct key_entry toshiba_acpi_keymap[] = {
{ KE_END, 0 },
};
/* alternative keymap */
static const struct dmi_system_id toshiba_alt_keymap_dmi[] = {
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "Satellite M840"),
},
},
{}
};
static const struct key_entry toshiba_acpi_alt_keymap[] = {
{ KE_KEY, 0x157, { KEY_MUTE } },
{ KE_KEY, 0x102, { KEY_ZOOMOUT } },
{ KE_KEY, 0x103, { KEY_ZOOMIN } },
{ KE_KEY, 0x139, { KEY_ZOOMRESET } },
{ KE_KEY, 0x13e, { KEY_SWITCHVIDEOMODE } },
{ KE_KEY, 0x13c, { KEY_BRIGHTNESSDOWN } },
{ KE_KEY, 0x13d, { KEY_BRIGHTNESSUP } },
{ KE_KEY, 0x158, { KEY_WLAN } },
{ KE_KEY, 0x13f, { KEY_TOUCHPAD_TOGGLE } },
{ KE_END, 0 },
};
/* utility
*/
......@@ -1440,6 +1465,7 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
acpi_handle ec_handle;
int error;
u32 hci_result;
const struct key_entry *keymap = toshiba_acpi_keymap;
dev->hotkey_dev = input_allocate_device();
if (!dev->hotkey_dev)
......@@ -1449,7 +1475,9 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
dev->hotkey_dev->phys = "toshiba_acpi/input0";
dev->hotkey_dev->id.bustype = BUS_HOST;
error = sparse_keymap_setup(dev->hotkey_dev, toshiba_acpi_keymap, NULL);
if (dmi_check_system(toshiba_alt_keymap_dmi))
keymap = toshiba_acpi_alt_keymap;
error = sparse_keymap_setup(dev->hotkey_dev, keymap, NULL);
if (error)
goto err_free_dev;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册