Analogous to the gso_segs selftests introduced in commit d9ff286a
("bpf: allow BPF programs access skb_shared_info->gso_segs field").
Signed-off-by: NVadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210909220409.8804-3-vfedorenko@novek.ru

BPF programs may want to know hardware timestamps if NIC supports
such timestamping.

Expose this data as hwtstamp field of __sk_buff the same way as
gso_segs/gso_size. This field could be accessed from the same
programs as tstamp field, but it's read-only field. Explicit test
to deny access to padding data is added to bpf_skb_is_valid_access.

Also update BPF_PROG_TEST_RUN tests of the feature.
Signed-off-by: NVadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210909220409.8804-2-vfedorenko@novek.ru

Magnus Karlsson says:

====================
This patch set facilitates adding new tests as well as describing
existing ones in the xsk selftests suite and adds 3 new test suites at
the end. The idea is to isolate the run-time that executes the test
from the actual implementation of the test. Today, implementing a test
amounts to adding test specific if-statements all around the run-time,
which is not scalable or amenable for reuse. This patch set instead
introduces a test specification that is the only thing that a test
fills in. The run-time then gets this specification and acts upon it
completely unaware of what test it is executing. This way, we can get
rid of all test specific if-statements from the run-time and the
implementation of the test can be contained in a single function. This
hopefully makes it easier to add tests and for users to understand
what the test accomplishes.

As a recap of what the run-time does: each test is based on the
run-time launching two threads and connecting a veth link between the
two threads. Each thread opens an AF_XDP socket on that veth interface
and one of them sends traffic that the other one receives and
validates. Each thread has its own umem. Note that this behavior is
not changed by this patch set.

A test specification consists of several items. Most importantly:

* Two packet streams. One for Tx thread that specifies what traffic to
  send and one for the Rx thread that specifies what that thread
  should receive. If it receives exactly what is specified, the test
  passes, otherwise it fails. A packet stream can also specify what
  buffers in the umem that should be used by the Rx and Tx threads.

* What kind of AF_XDP sockets it should create and bind to what
  interfaces

* How many times it should repeat the socket creation and destruction

* The name of the test

The interface for the test spec is the following:

void test_spec_init(struct test_spec *test, struct ifobject *ifobj_tx,
                    struct ifobject *ifobj_rx, enum test_mode mode);

/* Reset everything but the interface specifications and the mode */
void test_spec_reset(struct test_spec *test);

void test_spec_set_name(struct test_spec *test, const char *name);

Packet streams have the following interfaces:

struct pkt *pkt_stream_get_pkt(struct pkt_stream *pkt_stream, u32 pkt_nb)

struct pkt *pkt_stream_get_next_rx_pkt(struct pkt_stream *pkt_stream)

struct pkt_stream *pkt_stream_generate(struct xsk_umem_info *umem,
                                       u32 nb_pkts, u32 pkt_len);

void pkt_stream_delete(struct pkt_stream *pkt_stream);

struct pkt_stream *pkt_stream_clone(struct xsk_umem_info *umem,
                                    struct pkt_stream *pkt_stream);

/* Replaces all packets in the stream*/
void pkt_stream_replace(struct test_spec *test, u32 nb_pkts, u32 pkt_len);

/* Replaces every other packet in the stream */
void pkt_stream_replace_half(struct test_spec *test, u32 pkt_len, u32 offset);

/* For creating custom made packet streams */
void pkt_stream_generate_custom(struct test_spec *test, struct pkt *pkts,
                                u32 nb_pkts);

/* Restores the default packet stream */
void pkt_stream_restore_default(struct test_spec *test);

A test can then then in the most basic case described like this
(provided the test specification has been created before calling the
function):

static bool testapp_aligned(struct test_spec *test)
{
        test_spec_set_name(test, "RUN_TO_COMPLETION");
        testapp_validate_traffic(test);
}

Running the same test in unaligned mode would then look like this:

static bool testapp_unaligned(struct test_spec *test)
{
        if (!hugepages_present(test->ifobj_tx)) {
                ksft_test_result_skip("No 2M huge pages present.\n");
                return false;
        }

        test_spec_set_name(test, "UNALIGNED_MODE");
        test->ifobj_tx->umem->unaligned_mode = true;
        test->ifobj_rx->umem->unaligned_mode = true;
        /* Let half of the packets straddle a buffer boundrary */
        pkt_stream_replace_half(test, PKT_SIZE,
                                XSK_UMEM__DEFAULT_FRAME_SIZE - 32);
	/* Populate fill ring with addresses in the packet stream */
        test->ifobj_rx->pkt_stream->use_addr_for_fill = true;
        testapp_validate_traffic(test);

        pkt_stream_restore_default(test);
	return true;
}

3 of the last 4 patches in the set add 3 new test suites, one for
unaligned mode, one for testing the rejection of tricky invalid
descriptors plus the acceptance of some valid ones in the Tx ring, and
one for testing 2K frame sizes (the default is 4K).

What is left to do for follow-up patches:

* Convert the statistics tests to the new framework.

* Implement a way of registering new tests without having the enum
  test_type. Once this has been done (together with the previous
  bullet), all the test types can be dropped from the header
  file. This means that we should be able to add tests by just writing
  a single function with a new test specification, which is one of the
  goals.

* Introduce functions for manipulating parts of the test or interface
  spec instead of direct manipulations such as
  test->ifobj_rx->pkt_stream->use_addr_for_fill = true; which is kind
  of awkward.

* Move the run-time and its interface to its own .c and .h files. Then
  we can have all the tests in a separate file.

* Better error reporting if a test fails. Today it does not state what
  test fails and might not continue execute the rest of the tests due
  to this failure. Failures are not propagated upwards through the
  functions so a failed test will also be a passed test, which messes
  up the stats counting. This needs to be changed.

* Add option to run specific test instead of all of them

* Introduce pacing of sent packets so that they are never dropped
  by the receiver even if it is stalled for some reason. If you run
  the current tests on a heavily loaded system, they might fail in SKB
  mode due to packets being dropped by the driver on Tx. Though I have
  never seen it, it might happen.

v1 -> v2:

* Fixed a number of spelling errors [Maciej]
* Fixed use after free bug in pkt_stream_replace() [Maciej]
* pkt_stream_set -> pkt_stream_generate_custom [Maciej]
* Fixed formatting problem in testapp_invalid_desc() [Maciej]
====================
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add tests for 2K frame size. Both a standard send and receive test and
one testing for invalid descriptors when the frame size is 2K.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-21-magnus.karlsson@gmail.com

Add tests for invalid xsk descriptors in the Tx ring. A number of
handcrafted nasty invalid descriptors are created and submitted to the
tx ring to check that they are validated correctly. Corner case valid
ones are also sent. The tests are run for both aligned and unaligned
mode.

pkt_stream_set() is introduced to be able to create a hand-crafted
packet stream where every single packet is specified in detail.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-20-magnus.karlsson@gmail.com

Eliminate a test specific if-statement for the RX_FILL_EMTPY stats
test that is present in the test runner. We can do this as we now have
the use_addr_for_fill option. Just create and empty Rx packet stream
and indicated that the test runner should use the addresses in that to
populate the fill ring. As there are no packets in the stream, the
fill ring will be empty and we will get the error stats that we want
to test.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-19-magnus.karlsson@gmail.com

Add a test for unaligned mode in which packet buffers can be placed
anywhere within the umem. Some packets are made to straddle page
boundaries in order to check for correctness. On the Tx side, buffers
are now allocated according to the addresses found in the packet
stream. Thus, the placement of buffers can be controlled with the
boolean use_addr_for_fill in the packet stream.

One new pkt_stream interface is introduced: pkt_stream_replace_half()
that replaces every other packet in the default packet stream with the
specified new packet. The constant DEFAULT_OFFSET is also
introduced. It specifies at what offset from the start of a chunk a Tx
packet is placed by the sending thread. This is just to be able to
test that it is possible to send packets at an offset not equal to
zero.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-18-magnus.karlsson@gmail.com

Introduce the concept of a default packet stream that is the set of
packets sent by most tests. Then add the ability to replace it for a
test that would like to send or receive something else through the use
of the function pkt_stream_replace() and then restored with
pkt_stream_restore_default(). These are then used to convert the
STAT_TEST_TX_INVALID to use these new APIs.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-17-magnus.karlsson@gmail.com

Allow for invalid packets to be sent. These are verified by the Rx
thread not to be received. Or put in another way, if they are
received, the test will fail. This feature will be used to eliminate
an if statement for a stats test and will also be used by other tests
in later patches. The previous code could only deal with valid
packets.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-16-magnus.karlsson@gmail.com

Remove the MAX_SOCKS define as it always will be one for the forseable
future and the code does not work for any other case anyway.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-15-magnus.karlsson@gmail.com

Make the pthread_t variables local scope instead of global. No reason
for them to be global.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-14-magnus.karlsson@gmail.com

Make xdp_flags and bind_flags local instead of global by moving them
into the interface object. These flags decide if the socket should be
created in SKB mode or in DRV mode and therefore they are sticky and
will survive a test_spec_reset. Since every test is first run in SKB
mode then in DRV mode, this change only happens once. With this
change, the configured_mode global variable can also be
erradicated. The first test_spec_init() also becomes superfluous and
can be eliminated.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-13-magnus.karlsson@gmail.com

Add the ability in the test specification to specify numbers of
sockets to create. The default is one socket. This is then used to
remove test specific if-statements around the bpf_res tests.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-12-magnus.karlsson@gmail.com

Replace the second_step global variable with a test specification
variable called total_steps that a test can be set to indicate how
many times the packet stream should be sent without reinitializing any
sockets. This eliminates test specific code in the test runner around
the bidirectional test.

The total_steps variable is 1 by default as most tests only need a
single round of packets.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-11-magnus.karlsson@gmail.com

Introduce rx_on and tx_on in the ifobject so that we can describe if
the thread should create a socket with only tx, rx, or both. This
eliminates some test specific if statements from the code. We can also
eliminate the flow vector structure now as this is fully specified
by the tx_on and rx_on variables.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-10-magnus.karlsson@gmail.com

Add a use_poll option to the ifobject so that we do not need to use a
test specific if-statement in the test runner.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-9-magnus.karlsson@gmail.com

Introduce the test name in the test specification. This so we can set
the name locally in the test function and simplify the logic for
printing out test results.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-8-magnus.karlsson@gmail.com

Make the frame size configurable instead of it being hard coded to a
default. This is a property of the umem and will make it possible to
implement tests for different umem frame sizes in a later patch.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-7-magnus.karlsson@gmail.com

Move the global variable rxqsize to struct xsk_socket_info as it
describes the size of a ring in that struct. By default, it is set to
the size dictated by libbpf.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-6-magnus.karlsson@gmail.com

Move the global variables num_frames and frame_headroom to struct
xsk_umem_info. They describe properties of the umem so no reason for
them to be global.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-5-magnus.karlsson@gmail.com

Introduce a test specification to be able to concisely describe a
test. Currently, a test is implemented by sprinkling test specific if
statements here and there, which is not scalable or easy to
understand. The end goal with this patch set is to come to the point
in which a test is completely specified by a test specification that
can easily be constructed in a single function so that new tests can
be added without too much trouble. This test specification will be run
by a test runner that has no idea about tests. It just executes the
what test specification states.

This patch introduces the test specification and, as a start, puts the
two interface objects in there, one containing the packet stream to be
sent and the other one the packet stream that is supposed to be
received for a test to pass. The global variables containing these can
then be eliminated. The following patches will convert each existing
test into a test specification and add the needed fields into it and
the functionality in the test runner that act on the test
specification. At the end, the test runner should contain no test
specific code and each test should be described in a single simple
function.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-4-magnus.karlsson@gmail.com

Introduce a typedef of the thread function so this can be passed to
init_iface() in order to simplify that function.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-3-magnus.karlsson@gmail.com

Simplify the xsk_info and umem_info allocation by allocating them
upfront in an array, instead of allocating an array of pointers to
future creations of these. Allocating them upfront also has the
advantage that configuration information can be stored in these
structures instead of relying on global variables. With the previous
structure, xsk_info and umem_info were created too late to be able to
store most configuration information. This will be used to eliminate
most global variables in later patches in this series.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-2-magnus.karlsson@gmail.com

Introduce a macro LIBBPF_DEPRECATED_SINCE(major, minor, message) to prepare
the deprecation of two API functions. This macro marks functions as deprecated
when libbpf's version reaches the values passed as an argument.

As part of this change libbpf_version.h header is added with recorded major
(LIBBPF_MAJOR_VERSION) and minor (LIBBPF_MINOR_VERSION) libbpf version macros.
They are now part of libbpf public API and can be relied upon by user code.
libbpf_version.h is installed system-wide along other libbpf public headers.

Due to this new build-time auto-generated header, in-kernel applications
relying on libbpf (resolve_btfids, bpftool, bpf_preload) are updated to
include libbpf's output directory as part of a list of include search paths.
Better fix would be to use libbpf's make_install target to install public API
headers, but that clean up is left out as a future improvement. The build
changes were tested by building kernel (with KBUILD_OUTPUT and O= specified
explicitly), bpftool, libbpf, selftests/bpf, and resolve_btfids builds. No
problems were detected.

Note that because of the constraints of the C preprocessor we have to write
a few lines of macro magic for each version used to prepare deprecation (0.6
for now).

Also, use LIBBPF_DEPRECATED_SINCE() to schedule deprecation of
btf__get_from_id() and btf__load(), which are replaced by
btf__load_from_kernel_by_id() and btf__load_into_kernel(), respectively,
starting from future libbpf v0.6. This is part of libbpf 1.0 effort ([0]).

  [0] Closes: https://github.com/libbpf/libbpf/issues/278Co-developed-by: NQuentin Monnet <quentin@isovalent.com>
Co-developed-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NQuentin Monnet <quentin@isovalent.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210908213226.1871016-1-andrii@kernel.org

After updating to binutils 2.35, the build began to fail with an
assembler error. A bug was opened on the Red Hat Bugzilla a few days
later for the same issue.

Work around the problem by using the new `symver` attribute (introduced
in GCC 10) as needed instead of assembler directives.

This addresses Red Hat ([0]) and OpenSUSE ([1]) bug reports, as well as libbpf
issue ([2]).

  [0]: https://bugzilla.redhat.com/show_bug.cgi?id=1863059
  [1]: https://bugzilla.opensuse.org/show_bug.cgi?id=1188749
  [2]: Closes: https://github.com/libbpf/libbpf/issues/338Co-developed-by: NPatrick McCarty <patrick.mccarty@intel.com>
Co-developed-by: NMichal Suchanek <msuchanek@suse.de>
Signed-off-by: NPatrick McCarty <patrick.mccarty@intel.com>
Signed-off-by: NMichal Suchanek <msuchanek@suse.de>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210907221023.2660953-1-andrii@kernel.org

Matt Smith says:

====================

This patch series changes the type of bpf_object_skeleton->data
to const void * and provides a helper method X__elf_bytes(size_t *sz)
for accessing the raw binary data of the compiled embedded BPF object.

The type change enforces the previously implied behavior of immutability
for this field while casting it to (void *) before assignment allows
for compiling with previous versions of the libbpf headers without
compiler warnings.

The helper method allows easier access to the BPF binary object data
and is leveraged to populate the skeleton field.  The inclusion of
this helper method will allow users to get access to the data without
needing to populate an entire skeleton first.

Checks are added in the third patch to validate the behavior of the
added method
====================
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>

This patch adds two checks for the X__elf_bytes BPF skeleton helper
method. The first asserts that the pointer returned from the helper
method is valid, the second asserts that the provided size pointer is
set.
Signed-off-by: NMatt Smith <alastorze@fb.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210901194439.3853238-4-alastorze@fb.com

This adds a skeleton method X__elf_bytes() which returns the binary data of
the compiled and embedded BPF object file. It additionally sets the size of
the return data to the provided size_t pointer argument.

The assignment to s->data is cast to void * to ensure no warning is issued if
compiled with a previous version of libbpf where the bpf_object_skeleton field
is void * instead of const void *
Signed-off-by: NMatt Smith <alastorze@fb.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210901194439.3853238-3-alastorze@fb.com

This change was necessary to enforce the implied contract
that bpf_object_skeleton->data should not be mutated.  The data
will be cast to `void *` during assignment to handle the case
where a user is compiling with older libbpf headers to avoid
a compiler warning of `const void *` data being cast to `void *`
Signed-off-by: NMatt Smith <alastorze@fb.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210901194439.3853238-2-alastorze@fb.com

If libbpf encounters an ELF file that has been stripped of its symbol
table, it will crash in bpf_object__add_programs() when trying to
dereference the obj->efile.symbols pointer.

Fix this by erroring out of bpf_object__elf_collect() if it is not able
able to find the symbol table.

v2:
  - Move check into bpf_object__elf_collect() and add nice error message

Fixes: 6245947c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210901114812.204720-1-toke@redhat.com

bpf_prog_test_run_xattr takes a struct __sk_buff, but did not permit
that __skbuff to include an nonzero ingress_ifindex.

This patch updates to allow ingress_ifindex, convert the __sk_buff field to
sk_buff (skb_iif) and back, and tests that the value is present from on BPF
program side. The test sets an unlikely distinct value for ingress_ifindex
(11) from ifindex (1), which is in line with the rest of the synthetic field
tests.

Adding this support allows testing BPF that operates differently on
incoming and outgoing skbs by discriminating on this field.
Signed-off-by: NNeil Spring <ntspring@fb.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210831033356.1459316-1-ntspring@fb.com

Merge tag 'perf-tools-for-v5.15-2021-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool updates from Arnaldo Carvalho de Melo:
 "New features:

   - Improvements for the flamegraph python script, including:
       - Display perf.data header
       - Display PIDs of user stacks
       - Added option to change color scheme
       - Default to blue/green color scheme to improve accessibility
       - Correctly identify kernel stacks when debuginfo is available

   - Improvements for 'perf bench futex':
       - Add --mlockall parameter
       - Add --broadcast and --pi to the 'requeue' sub benchmark

   - Add support for PMU aliases.

   - Introduce an ARM Coresight ETE decoder.

   - Add a 'perf bench' entry for evlist open/close operations, to help
     quantify improvements with multithreading 'perf record'.

   - Allow reporting the [un]throttle PERF_RECORD_ meta event in 'perf
     script's python scripting.

   - Add a 'perf test' entry for PMU aliases.

   - Add a 'perf test' entry for 'perf record/perf report/perf script'
     pipe mode.

  Fixes:

   - perf script dlfilter (API for filtering via dynamically loaded
     shared object introduced in v5.14) fixes and a 'perf test' entry
     for it.

   - Fix get_current_dir_name() compilation on Android.

   - Fix issues with asciidoc and double dashes uses.

   - Fix memory leaks in the BTF handling code.

   - Fix leftover problems in the Documentation from the infrastructure
     originally lifted from the git codebase.

   - Fix *probe_vfs_getname.sh 'perf test' failures.

   - Handle fd gaps in 'perf test's test__dso_data_reopen().

   - Make sure to show disasembly warnings for 'perf annotate --stdio'.

   - Fix output from pipe to file and vice-versa in 'perf
     record/report/script'.

   - Correct 'perf data -h' output.

   - Fix wrong comm in system-wide mode with 'perf record --delay'.

   - Do not allow --for-each-cgroup without cpu in 'perf stat'

   - Make 'perf test --skip' work on shell tests.

   - Fix libperf's verbose printing.

  Misc improvements:

   - Preparatory patches for multithreading various 'perf record' phases
     (synthesizing, opening, recording, etc).

   - Add sparse context/locking annotations in compiler-types.h, also to
     help with the multithreading effort.

   - Optimize the generation of the arch specific erno tables used in
     'perf trace'.

   - Optimize libperf's perf_cpu_map__max().

   - Improve ARM's CoreSight warnings.

   - Report collisions in AUX records.

   - Improve warnings for the LLVM 'perf test' entry.

   - Improve the PMU events 'perf test' codebase.

   - perf test: Do not compare overheads in the zstd comp test

   - Better support annotation on ARM.

   - Update 'perf trace's cmd string table to decode sys_bpf() first
     arg.

  Vendor events:

   - Add JSON events and metrics for Intel's Ice Lake, Tiger Lake and
     Elhart Lake.

   - Update JSON eventsand metrics for Intel's Cascade Lake and Sky Lake
     servers.

  Hardware tracing:

   - Improvements for the ARM hardware tracing auxtrace support"

* tag 'perf-tools-for-v5.15-2021-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (130 commits)
  perf tests: Add test for PMU aliases
  perf pmu: Add PMU alias support
  perf session: Report collisions in AUX records
  perf script python: Allow reporting the [un]throttle PERF_RECORD_ meta event
  perf build: Report failure for testing feature libopencsd
  perf cs-etm: Show a warning for an unknown magic number
  perf cs-etm: Print the decoder name
  perf cs-etm: Create ETE decoder
  perf cs-etm: Update OpenCSD decoder for ETE
  perf cs-etm: Fix typo
  perf cs-etm: Save TRCDEVARCH register
  perf cs-etm: Refactor out ETMv4 header saving
  perf cs-etm: Initialise architecture based on TRCIDR1
  perf cs-etm: Refactor initialisation of decoder params.
  tools build: Fix feature detect clean for out of source builds
  perf evlist: Add evlist__for_each_entry_from() macro
  perf evsel: Handle precise_ip fallback in evsel__open_cpu()
  perf evsel: Move bpf_counter__install_pe() to success path in evsel__open_cpu()
  perf evsel: Move test_attr__open() to success path in evsel__open_cpu()
  perf evsel: Move ignore_missing_thread() to fallback code
  ...

Pull tracing updates from Steven Rostedt:

 - simplify the Kconfig use of FTRACE and TRACE_IRQFLAGS_SUPPORT

 - bootconfig can now start histograms

 - bootconfig supports group/all enabling

 - histograms now can put values in linear size buckets

 - execnames can be passed to synthetic events

 - introduce "event probes" that attach to other events and can retrieve
   data from pointers of fields, or record fields as different types (a
   pointer to a string as a string instead of just a hex number)

 - various fixes and clean ups

* tag 'trace-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (35 commits)
  tracing/doc: Fix table format in histogram code
  selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes
  selftests/ftrace: Add selftest for testing eprobe events on synthetic events
  selftests/ftrace: Add test case to test adding and removing of event probe
  selftests/ftrace: Fix requirement check of README file
  selftests/ftrace: Add clear_dynamic_events() to test cases
  tracing: Add a probe that attaches to trace events
  tracing/probes: Reject events which have the same name of existing one
  tracing/probes: Have process_fetch_insn() take a void * instead of pt_regs
  tracing/probe: Change traceprobe_set_print_fmt() to take a type
  tracing/probes: Use struct_size() instead of defining custom macros
  tracing/probes: Allow for dot delimiter as well as slash for system names
  tracing/probe: Have traceprobe_parse_probe_arg() take a const arg
  tracing: Have dynamic events have a ref counter
  tracing: Add DYNAMIC flag for dynamic events
  tracing: Replace deprecated CPU-hotplug functions.
  MAINTAINERS: Add an entry for os noise/latency
  tracepoint: Fix kerneldoc comments
  bootconfig/tracing/ktest: Update ktest example for boot-time tracing
  tools/bootconfig: Use per-group/all enable option in ftrace2bconf script
  ...

Pull ARC updates from Vineet Gupta:
 "Finally a big pile of changes for ARC (atomics/mm). These are from our
  internal arc64 tree, preparing mainline for eventual arc64 support.
  I'm spreading them out to avoid tsunami of patches in one release.

   - MM rework:
       - Implement up to 4 paging levels
       - Enable STRICT_MM_TYPECHECK
       - switch pgtable_t back to 'struct page *'

   - Atomics rework / implement relaxed accessors

   - Retire legacy MMUv1,v2; ARC750 cores

   - A few other build errors, typos"

* tag 'arc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (33 commits)
  ARC: mm: vmalloc sync from kernel to user table to update PMD ...
  ARC: mm: support 4 levels of page tables
  ARC: mm: support 3 levels of page tables
  ARC: mm: switch to asm-generic/pgalloc.h
  ARC: mm: switch pgtable_t back to struct page *
  ARC: mm: hack to allow 2 level build with 4 level code
  ARC: mm: disintegrate pgtable.h into levels and flags
  ARC: mm: disintegrate mmu.h (arcv2 bits out)
  ARC: mm: move MMU specific bits out of entry code ...
  ARC: mm: move MMU specific bits out of ASID allocator
  ARC: mm: non-functional code movement/cleanup
  ARC: mm: pmd_populate* to use the canonical set_pmd (and drop pmd_set)
  ARC: ioremap: use more commonly used PAGE_KERNEL based uncached flag
  ARC: mm: Enable STRICT_MM_TYPECHECKS
  ARC: mm: Fixes to allow STRICT_MM_TYPECHECKS
  ARC: mm: move mmu/cache externs out to setup.h
  ARC: mm: remove tlb paranoid code
  ARC: mm: use SCRATCH_DATA0 register for caching pgdir in ARCv2 only
  ARC: retire MMUv1 and MMUv2 support
  ARC: retire ARC750 support
  ...

Pull RISC-V updates from Palmer Dabbelt:

 - support PC-relative instructions (auipc and branches) in kprobes

 - support for forced IRQ threading

 - support for the hlt/nohlt kernel command line options, via the
   generic idle loop

 - show the edge/level triggered behavior of interrupts
   in /proc/interrupts

 - a handful of cleanups to our address mapping mechanisms

 - support for allocating gigantic hugepages via CMA

 - support for the undefined behavior sanitizer (UBSAN)

 - a handful of cleanups to the VDSO that allow the kernel to build with
   LLD.

 - support for hugepage migration

* tag 'riscv-for-linus-5.15-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
  riscv: add support for hugepage migration
  RISC-V: Fix VDSO build for !MMU
  riscv: use strscpy to replace strlcpy
  riscv: explicitly use symbol offsets for VDSO
  riscv: Enable Undefined Behavior Sanitizer UBSAN
  riscv: Keep the riscv Kconfig selects sorted
  riscv: Support allocating gigantic hugepages using CMA
  riscv: fix the global name pfn_base confliction error
  riscv: Move early fdt mapping creation in its own function
  riscv: Simplify BUILTIN_DTB device tree mapping handling
  riscv: Use __maybe_unused instead of #ifdefs around variable declarations
  riscv: Get rid of map_size parameter to create_kernel_page_table
  riscv: Introduce va_kernel_pa_offset for 32-bit kernel
  riscv: Optimize kernel virtual address conversion macro
  dt-bindings: riscv: add starfive jh7100 bindings
  riscv: Enable GENERIC_IRQ_SHOW_LEVEL
  riscv: Enable idle generic idle loop
  riscv: Allow forced irq threading
  riscv: Implement thread_struct whitelist for hardened usercopy
  riscv: kprobes: implement the branch instructions
  ...

... but make it a config option so that broken environments can disable
it when required.

We really should always have a clean build, and will disable specific
over-eager warnings as required, if we can't fix them.  But while I
fairly religiously enforce that in my own tree, it doesn't get enforced
by various build robots that don't necessarily report warnings.

So this just makes '-Werror' a default compiler flag, but allows people
to disable it for their configuration if they have some particular
issues.

Occasionally, new compiler versions end up enabling new warnings, and it
can take a while before we have them fixed (or the warnings disabled if
that is what it takes), so the config option allows for that situation.

Hopefully this will mean that I get fewer pull requests that have new
warnings that were not noticed by various automation we have in place.

Knock wood.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull more USB updates from Greg KH:
 "Here are some straggler USB-serial changes for 5.15-rc1.

  These were not included in the first pull request as they came in
  "late" from Johan and I had missed them in my pull request earlier
  this week.

  Nothing big in here, just some USB to serial driver updates and fixes.
  All of these were in linux-next before I pulled them into my tree, and
  have been in linux-next all this week from my tree with no reported
  problems"

* tag 'usb-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: pl2303: fix GL type detection
  USB: serial: replace symbolic permissions by octal permissions
  USB: serial: cp210x: determine fw version for CP2105 and CP2108
  USB: serial: cp210x: clean up type detection
  USB: serial: cp210x: clean up set-chars request
  USB: serial: cp210x: clean up control-request timeout
  USB: serial: cp210x: fix flow-control error handling
  USB: serial: cp210x: fix control-characters error handling
  USB: serial: io_edgeport: drop unused descriptor helper

Pull MTD updates from Miquel Raynal:
 "MTD changes:
   - blkdevs:
       - Simplify the refcounting in blktrans_{open, release}
       - Simplify blktrans_getgeo
       - Remove blktrans_ref_mutex
       - Simplify blktrans_dev_get
       - Use lockdep_assert_held
       - Don't hold del_mtd_blktrans_dev in blktrans_{open, release}
   - ftl:
       - Don't cast away the type when calling add_mtd_blktrans_dev
       - Don't cast away the type when calling add_mtd_blktrans_dev
       - Use container_of() rather than cast
       - Fix use-after-free
       - Add discard support
       - Allow use of MTD_RAM for testing purposes
   - concat:
       - Check _read, _write callbacks existence before assignment
       - Judge callback existence based on the master
   - maps:
       - Maps: remove dead MTD map driver for PMC-Sierra MSP boards
   - mtdblock:
       - Warn if added for a NAND device
       - Add comment about UBI block devices
       - Update old JFFS2 mention in Kconfig
   - partitions:
       - Redboot: convert to YAML

  NAND core changes:
   - Repair Miquel Raynal's email address in MAINTAINERS
   - Fix a couple of spelling mistakes in Kconfig
   - bbt: Skip bad blocks when searching for the BBT in NAND
   - Remove never changed ret variable

  Raw NAND changes:
   - cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
   - intel: Fix error handling in probe
   - omap: Fix kernel doc warning on 'calcuate' typo
   - gpmc: Fix the ECC bytes vs. OOB bytes equation

  SPI-NAND core changes:
   - Properly fill the OOB area.
   - Fix comment

  SPI-NAND drivers changes:
   - macronix: Add Quad support for serial NAND flash"

* tag 'mtd/for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (30 commits)
  mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
  mtd_blkdevs: simplify the refcounting in blktrans_{open, release}
  mtd_blkdevs: simplify blktrans_getgeo
  mtd_blkdevs: remove blktrans_ref_mutex
  mtd_blkdevs: simplify blktrans_dev_get
  mtd/rfd_ftl: don't cast away the type when calling add_mtd_blktrans_dev
  mtd/ftl: don't cast away the type when calling add_mtd_blktrans_dev
  mtd_blkdevs: use lockdep_assert_held
  mtd_blkdevs: don't hold del_mtd_blktrans_dev in blktrans_{open, release}
  mtd: rawnand: intel: Fix error handling in probe
  mtd: mtdconcat: Check _read, _write callbacks existence before assignment
  mtd: mtdconcat: Judge callback existence based on the master
  mtd: maps: remove dead MTD map driver for PMC-Sierra MSP boards
  mtd: rfd_ftl: use container_of() rather than cast
  mtd: rfd_ftl: fix use-after-free
  mtd: rfd_ftl: add discard support
  mtd: rfd_ftl: allow use of MTD_RAM for testing purposes
  mtdblock: Warn if added for a NAND device
  mtd: spinand: macronix: Add Quad support for serial NAND flash
  mtdblock: Add comment about UBI block devices
  ...

    fs/binfmt_aout.c: In function ‘load_aout_library’:
    fs/binfmt_aout.c:311:27: error: expected ‘)’ before ‘;’ token
      311 |    MAP_FIXED | MAP_PRIVATE;
	  |                           ^
    fs/binfmt_aout.c:309:10: error: too few arguments to function ‘vm_mmap’
      309 |  error = vm_mmap(file, start_addr, ex.a_text + ex.a_data,
	  |          ^~~~~~~
    In file included from fs/binfmt_aout.c:12:
    include/linux/mm.h:2626:35: note: declared here
     2626 | extern unsigned long __must_check vm_mmap(struct file *, unsigned long,
	  |                                   ^~~~~~~

Fix this by reverting the accidental replacement of a comma by a
semicolon.

Fixes: 42be8b42 ("binfmt: don't use MAP_DENYWRITE when loading shared libraries via uselib()")
Reported-by: noreply@ellerman.id.au
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull MAP_DENYWRITE removal from David Hildenbrand:
 "Remove all in-tree usage of MAP_DENYWRITE from the kernel and remove
  VM_DENYWRITE.

  There are some (minor) user-visible changes:

   - We no longer deny write access to shared libaries loaded via legacy
     uselib(); this behavior matches modern user space e.g. dlopen().

   - We no longer deny write access to the elf interpreter after exec
     completed, treating it just like shared libraries (which it often
     is).

   - We always deny write access to the file linked via /proc/pid/exe:
     sys_prctl(PR_SET_MM_MAP/EXE_FILE) will fail if write access to the
     file cannot be denied, and write access to the file will remain
     denied until the link is effectivel gone (exec, termination,
     sys_prctl(PR_SET_MM_MAP/EXE_FILE)) -- just as if exec'ing the file.

  Cross-compiled for a bunch of architectures (alpha, microblaze, i386,
  s390x, ...) and verified via ltp that especially the relevant tests
  (i.e., creat07 and execve04) continue working as expected"

* tag 'denywrite-for-5.15' of git://github.com/davidhildenbrand/linux:
  fs: update documentation of get_write_access() and friends
  mm: ignore MAP_DENYWRITE in ksys_mmap_pgoff()
  mm: remove VM_DENYWRITE
  binfmt: remove in-tree usage of MAP_DENYWRITE
  kernel/fork: always deny write access to current MM exe_file
  kernel/fork: factor out replacing the current MM exe_file
  binfmt: don't use MAP_DENYWRITE when loading shared libraries via uselib()