Skip to content

K
Kernel

openeuler / Kernel
11 个月 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 17 12月, 2009 4 次提交
    • Y
      x86: Fix checking of SRAT when node 0 ram is not from 0 · 32996250
      由 Yinghai Lu 提交于 
      Found one system that boot from socket1 instead of socket0, SRAT get rejected...

[    0.000000] SRAT: Node 1 PXM 0 0-a0000
[    0.000000] SRAT: Node 1 PXM 0 100000-80000000
[    0.000000] SRAT: Node 1 PXM 0 100000000-2080000000
[    0.000000] SRAT: Node 0 PXM 1 2080000000-4080000000
[    0.000000] SRAT: Node 2 PXM 2 4080000000-6080000000
[    0.000000] SRAT: Node 3 PXM 3 6080000000-8080000000
[    0.000000] SRAT: Node 4 PXM 4 8080000000-a080000000
[    0.000000] SRAT: Node 5 PXM 5 a080000000-c080000000
[    0.000000] SRAT: Node 6 PXM 6 c080000000-e080000000
[    0.000000] SRAT: Node 7 PXM 7 e080000000-10080000000
...
[    0.000000] NUMA: Allocated memnodemap from 500000 - 701040
[    0.000000] NUMA: Using 20 for the hash shift.
[    0.000000] Adding active range (0, 0x2080000, 0x4080000) 0 entries of 3200 used
[    0.000000] Adding active range (1, 0x0, 0x96) 1 entries of 3200 used
[    0.000000] Adding active range (1, 0x100, 0x7f750) 2 entries of 3200 used
[    0.000000] Adding active range (1, 0x100000, 0x2080000) 3 entries of 3200 used
[    0.000000] Adding active range (2, 0x4080000, 0x6080000) 4 entries of 3200 used
[    0.000000] Adding active range (3, 0x6080000, 0x8080000) 5 entries of 3200 used
[    0.000000] Adding active range (4, 0x8080000, 0xa080000) 6 entries of 3200 used
[    0.000000] Adding active range (5, 0xa080000, 0xc080000) 7 entries of 3200 used
[    0.000000] Adding active range (6, 0xc080000, 0xe080000) 8 entries of 3200 used
[    0.000000] Adding active range (7, 0xe080000, 0x10080000) 9 entries of 3200 used
[    0.000000] SRAT: PXMs only cover 917504MB of your 1048566MB e820 RAM. Not used.
[    0.000000] SRAT: SRAT not used.

the early_node_map is not sorted because node0 with non zero start come first.

so try to sort it right away after all regions are registered.

also fixs refression by 8716273c (x86: Export srat physical topology)

-v2: make it more solid to handle cross node case like node0 [0,4g), [8,12g) and node1 [4g, 8g), [12g, 16g)
-v3: update comments.
Reported-and-tested-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B2579D2.3010201@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      32996250
    • S
      x86, cpuid: Add "volatile" to asm in native_cpuid() · 45a94d7c
      由 Suresh Siddha 提交于 
      xsave_cntxt_init() does something like:

	cpuid(0xd, ..);	// find out what features FP/SSE/.. etc are supported

	xsetbv();	// enable the features known to OS

	cpuid(0xd, ..);	// find out the size of the context for features enabled

Depending on what features get enabled in xsetbv(), value of the
cpuid.eax=0xd.ecx=0.ebx changes correspondingly (representing the
size of the context that is enabled).

As we don't have volatile keyword for native_cpuid(), gcc 4.1.2
optimizes away the second cpuid and the kernel continues to use
the cpuid information obtained before xsetbv(), ultimately leading to kernel
crash on processors supporting more state than the legacy FP/SSE.

Add "volatile" for native_cpuid().
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1261009542.2745.55.camel@sbs-t61.sc.intel.com>
Cc: stable@kernel.org
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      45a94d7c
    • B
      x86, msr: msrs_alloc/free for CONFIG_SMP=n · 6ede31e0
      由 Borislav Petkov 提交于 
      Randy Dunlap reported the following build error:

"When CONFIG_SMP=n, CONFIG_X86_MSR=m:

ERROR: "msrs_free" [drivers/edac/amd64_edac_mod.ko] undefined!
ERROR: "msrs_alloc" [drivers/edac/amd64_edac_mod.ko] undefined!"

This is due to the fact that <arch/x86/lib/msr.c> is conditioned on
CONFIG_SMP and in the UP case we have only the stubs in the header.
Fork off SMP functionality into a new file (msr-smp.c) and build
msrs_{alloc,free} unconditionally.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
LKML-Reference: <20091216231625.GD27228@liondog.tnic>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      6ede31e0
    • A
      x86, amd: Get multi-node CPU info from NodeId MSR instead of PCI config space · 9d260ebc
      由 Andreas Herrmann 提交于 
      Use NodeId MSR to get NodeId and number of nodes per processor.
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20091216144355.GB28798@alberich.amd.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      9d260ebc
  3. 16 12月, 2009 8 次提交
  5. 15 12月, 2009 3 次提交
    • F
      x86: Split swiotlb initialization into two stages · 186a2502
      由 FUJITA Tomonori 提交于 
      The commit f4780ca0 moves
swiotlb initialization before dma32_free_bootmem(). It's
supposed to fix a bug that the commit
75f1cdf1 introduced, we
initialize SWIOTLB right after dma32_free_bootmem so we wrongly
steal memory area allocated for GART with broken BIOS earlier.

However, the above commit introduced another problem, which
likely breaks machines with huge amount of memory. Such a box
use the majority of DMA32_ZONE so there is no memory for
swiotlb.

With this patch, the x86 IOMMU initialization sequence are:

1. We set swiotlb to 1 in the case of (max_pfn > MAX_DMA32_PFN
   && !no_iommu). If swiotlb usage is forced by the boot option,
   we go to the step 3 and finish (we don't try to detect IOMMUs).

2. We call the detection functions of all the IOMMUs. The
   detection function sets x86_init.iommu.iommu_init to the IOMMU
   initialization function (so we can avoid calling the
   initialization functions of all the IOMMUs needlessly).

3. We initialize swiotlb (and set dma_ops to swiotlb_dma_ops) if
   swiotlb is set to 1.

4. If the IOMMU initialization function doesn't need swiotlb
   (e.g. the initialization is sucessful) then sets swiotlb to zero.

5. If we find that swiotlb is set to zero, we free swiotlb
   resource.
Reported-by: NYinghai Lu <yinghai@kernel.org>
Reported-by: NRoland Dreier <rdreier@cisco.com>
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
LKML-Reference: <20091215204729A.fujita.tomonori@lab.ntt.co.jp>
Tested-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      186a2502
    • H
      x86: Regex support and known-movable symbols for relocs, fix _end · 873b5271
      由 H. Peter Anvin 提交于 
      This adds a new category of symbols to the relocs program: symbols
which are known to be relative, even though the linker emits them as
absolute; this is the case for symbols that live in the linker script,
which currently applies to _end.

Unfortunately the previous workaround of putting _end in its own empty
section was defeated by newer binutils, which remove empty sections
completely.

This patch also changes the symbol matching to use regular expressions
instead of hardcoded C for specific patterns.

This is a decidedly non-minimal patch: a modified version of the
relocs program is used as part of the Syslinux build, and this 	is
basically a backport to Linux of some of those changes; they have
thus been well tested.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
LKML-Reference: <4AF86211.3070103@zytor.com>
Acked-by: NMichal Marek <mmarek@suse.cz>
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
      873b5271
    • H
      x86, msr: Remove incorrect, duplicated code in the MSR driver · 494c2ebf
      由 H. Peter Anvin 提交于 
      The MSR driver would compute the values for cpu and c at declaration,
and then again in the body of the function.  This isn't merely
redundant, but unsafe, since cpu might not refer to a valid CPU at
that point.

Remove the unnecessary and dangerous references in the declarations.
This code now matches the equivalent code in the CPUID driver.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      494c2ebf
  7. 14 12月, 2009 6 次提交
  9. 13 12月, 2009 1 次提交
  11. 12 12月, 2009 7 次提交
    • H
      nvram: Fix write beyond end condition; prove to gcc copy is safe · a01c7800
      由 H. Peter Anvin 提交于 
      In nvram_write, first of all, correctly handle the case where the file
pointer is already beyond the end; we should return EOF in that case.

Second, make the logic a bit more explicit so that gcc can statically
prove that the copy_from_user() is safe.  Once the condition of the
beyond-end filepointer is eliminated, the copy is safe but gcc can't
prove it, causing build failures for i386 allyesconfig.

Third, eliminate the entirely superfluous variable "len", and just use
the passed-in variable "count" instead.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <tip-*@git.kernel.org>
      a01c7800
    • H
      mm: Adjust do_pages_stat() so gcc can see copy_from_user() is safe · b9255850
      由 H. Peter Anvin 提交于 
      Slightly adjust the logic for determining the size of the
copy_form_user() in do_pages_stat(); with this change, gcc can see
that the copying is safe.

Without this, we get a build error for i386 allyesconfig:

/home/hpa/kernel/linux-2.6-tip.urgent/arch/x86/include/asm/uaccess_32.h:213:
error: call to ‘copy_from_user_overflow’ declared with attribute
error: copy_from_user() buffer size is not provably correct

Unlike an earlier patch from Arjan, this doesn't introduce new
variables; merely reshuffles the compare so that gcc can see that an
overflow cannot happen.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
LKML-Reference: <20090926205406.30d55b08@infradead.org>
      b9255850
    • M
      x86: Limit the number of processor bootup messages · 2eaad1fd
      由 Mike Travis 提交于 
      When there are a large number of processors in a system, there
is an excessive amount of messages sent to the system console.
It's estimated that with 4096 processors in a system, and the
console baudrate set to 56K, the startup messages will take
about 84 minutes to clear the serial port.

This set of patches limits the number of repetitious messages
which contain no additional information.  Much of this information
is obtainable from the /proc and /sysfs.   Some of the messages
are also sent to the kernel log buffer as KERN_DEBUG messages so
dmesg can be used to examine more closely any details specific to
a problem.

The new cpu bootup sequence for system_state == SYSTEM_BOOTING:

Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
Booting Node   1, Processors  #8 #9 #10 #11 #12 #13 #14 #15 Ok.
...
Booting Node   3, Processors  #56 #57 #58 #59 #60 #61 #62 #63 Ok.
Brought up 64 CPUs

After the system is running, a single line boot message is displayed
when CPU's are hotplugged on:

    Booting Node %d Processor %d APIC 0x%x

Status of the following lines:

    CPU: Physical Processor ID:		printed once (for boot cpu)
    CPU: Processor Core ID:		printed once (for boot cpu)
    CPU: Hyper-Threading is disabled	printed once (for boot cpu)
    CPU: Thermal monitoring enabled	printed once (for boot cpu)
    CPU %d/0x%x -> Node %d:		removed
    CPU %d is now offline:		only if system_state == RUNNING
    Initializing CPU#%d:		KERN_DEBUG
Signed-off-by: NMike Travis <travis@sgi.com>
LKML-Reference: <4B219E28.8080601@sgi.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      2eaad1fd
    • M
      x86: Remove enabling x2apic message for every CPU · 450b1e8d
      由 Mike Travis 提交于 
      Print only once that the system is supporting x2apic mode.
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <4B226E92.5080904@sgi.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      450b1e8d
    • H
      doc: Add documentation for bootloader_{type,version} · d75757ab
      由 H. Peter Anvin 提交于 
      Add documentation for kernel/bootloader_type and
kernel/bootloader_version to sysctl/kernel.txt.  This should really
have been done a long time ago.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Shen Feng <shen@cn.fujitsu.com>
      d75757ab
    • B
      x86, msr: Add support for non-contiguous cpumasks · 50542251
      由 Borislav Petkov 提交于 
      The current rd/wrmsr_on_cpus helpers assume that the supplied
cpumasks are contiguous. However, there are machines out there
like some K8 multinode Opterons which have a non-contiguous core
enumeration on each node (e.g. cores 0,2 on node 0 instead of 0,1), see
http://www.gossamer-threads.com/lists/linux/kernel/1160268.

This patch fixes out-of-bounds writes (see URL above) by adding per-CPU
msr structs which are used on the respective cores.

Additionally, two helpers, msrs_{alloc,free}, are provided for use by
the callers of the MSR accessors.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20091211171440.GD31998@aftab>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      50542251
    • H
      Merge commit 'linus/master' into x86/urgent · 5c6baba8
      由 H. Peter Anvin 提交于
      5c6baba8
  13. 11 12月, 2009 11 次提交