Using ifconfig command to delete the ipv6 address will cause
the i40e network card driver to delete its internal mac_filter and
i40e_service_task kernel thread will concurrently access the mac_filter.
These two processes are not protected by lock
so causing the following use-after-free problems.

 print_address_description+0x70/0x360
 ? vprintk_func+0x5e/0xf0
 kasan_report+0x1b2/0x330
 i40e_sync_vsi_filters+0x4f0/0x1850 [i40e]
 i40e_sync_filters_subtask+0xe3/0x130 [i40e]
 i40e_service_task+0x195/0x24c0 [i40e]
 process_one_work+0x3f5/0x7d0
 worker_thread+0x61/0x6c0
 ? process_one_work+0x7d0/0x7d0
 kthread+0x1c3/0x1f0
 ? kthread_park+0xc0/0xc0
 ret_from_fork+0x35/0x40

Allocated by task 2279810:
 kasan_kmalloc+0xa0/0xd0
 kmem_cache_alloc_trace+0xf3/0x1e0
 i40e_add_filter+0x127/0x2b0 [i40e]
 i40e_add_mac_filter+0x156/0x190 [i40e]
 i40e_addr_sync+0x2d/0x40 [i40e]
 __hw_addr_sync_dev+0x154/0x210
 i40e_set_rx_mode+0x6d/0xf0 [i40e]
 __dev_set_rx_mode+0xfb/0x1f0
 __dev_mc_add+0x6c/0x90
 igmp6_group_added+0x214/0x230
 __ipv6_dev_mc_inc+0x338/0x4f0
 addrconf_join_solict.part.7+0xa2/0xd0
 addrconf_dad_work+0x500/0x980
 process_one_work+0x3f5/0x7d0
 worker_thread+0x61/0x6c0
 kthread+0x1c3/0x1f0
 ret_from_fork+0x35/0x40

Freed by task 2547073:
 __kasan_slab_free+0x130/0x180
 kfree+0x90/0x1b0
 __i40e_del_filter+0xa3/0xf0 [i40e]
 i40e_del_mac_filter+0xf3/0x130 [i40e]
 i40e_addr_unsync+0x85/0xa0 [i40e]
 __hw_addr_sync_dev+0x9d/0x210
 i40e_set_rx_mode+0x6d/0xf0 [i40e]
 __dev_set_rx_mode+0xfb/0x1f0
 __dev_mc_del+0x69/0x80
 igmp6_group_dropped+0x279/0x510
 __ipv6_dev_mc_dec+0x174/0x220
 addrconf_leave_solict.part.8+0xa2/0xd0
 __ipv6_ifa_notify+0x4cd/0x570
 ipv6_ifa_notify+0x58/0x80
 ipv6_del_addr+0x259/0x4a0
 inet6_addr_del+0x188/0x260
 addrconf_del_ifaddr+0xcc/0x130
 inet6_ioctl+0x152/0x190
 sock_do_ioctl+0xd8/0x2b0
 sock_ioctl+0x2e5/0x4c0
 do_vfs_ioctl+0x14e/0xa80
 ksys_ioctl+0x7c/0xa0
 __x64_sys_ioctl+0x42/0x50
 do_syscall_64+0x98/0x2c0
 entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: 41c445ff ("i40e: main driver core")
Signed-off-by: NDi Zhu <zhudi2@huawei.com>
Signed-off-by: NRui Zhang <zhangrui182@huawei.com>
Tested-by: NGurucharan G <gurucharanx.g@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Hide i40e opcode information sent during response to VF in case when
untrusted VF tried to change MAC on the VF interface.

This is implemented by adding an additional parameter 'hide' to the
response sent to VF function that hides the display of error
information, but forwards the error code to VF.

Previously it was not possible to send response with some error code
to VF without displaying opcode information.

Fixes: 5c3c48ac ("i40e: implement virtual device interface")
Signed-off-by: NGrzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: NMateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: NPaul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: NAleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: NTony Brelinski <tony.brelinski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Time synchronization was not properly enabled on non-MSI-X platforms.

Fixes: 2c344ae2 ("igc: Add support for TX timestamping")
Signed-off-by: NJames McLaughlin <james.mclaughlin@qsc.com>
Reviewed-by: NVinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: NNechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

It was reported that when PCIe PTM is enabled, some lockups could
be observed with some integrated i225-V models.

While the issue is investigated, we can disable crosstimestamp for
those models and see no loss of functionality, because those models
don't have any support for time synchronization.

Fixes: a90ec848 ("igc: Add support for PTP getcrosststamp()")
Link: https://lore.kernel.org/all/924175a188159f4e03bd69908a91e606b574139b.camel@gmx.de/Reported-by: NStefan Dietrich <roots@gmx.de>
Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: NNechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Recent net core changes caused an issue with few Intel drivers
(reportedly igb), where taking RTNL in RPM resume path results in a
deadlock. See [0] for a bug report. I don't think the core changes
are wrong, but taking RTNL in RPM resume path isn't needed.
The Intel drivers are the only ones doing this. See [1] for a
discussion on the issue. Following patch changes the RPM resume path
to not take RTNL.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=215129
[1] https://lore.kernel.org/netdev/20211125074949.5f897431@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/t/

Fixes: bd869245 ("net: core: try to runtime-resume detached device in __dev_open")
Fixes: f32a2137 ("ethtool: runtime-resume netdev parent before ethtool ioctl ops")
Tested-by: NMartin Stolpe <martin.stolpe@gmail.com>
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20211220201844.2714498-1-anthony.l.nguyen@intel.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Currently cleaned_count is initialized to ICE_DESC_UNUSED(rx_ring) and
later on during the Rx processing it is incremented per each frame that
driver consumed. This can result in excessive buffers requested from xsk
pool based on that value.

To address this, just drop cleaned_count and pass
ICE_DESC_UNUSED(rx_ring) directly as a function argument to
ice_alloc_rx_bufs_zc(). Idea is to ask for buffers as many as consumed.

Let us also call ice_alloc_rx_bufs_zc unconditionally at the end of
ice_clean_rx_irq_zc. This has been changed in that way for corresponding
ice_clean_rx_irq, but not here.

Fixes: 2d4238f5 ("ice: Add support for AF_XDP")
Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: NKiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Commit ac6f733a ("ice: allow empty Rx descriptors") stated that ice
HW can produce empty descriptors that are valid and they should be
processed.

Add this support to xsk ZC path to avoid potential processing problems.

Fixes: 2d4238f5 ("ice: Add support for AF_XDP")
Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: NKiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The descriptor that ntu is pointing at when we exit
ice_alloc_rx_bufs_zc() should not have its corresponding DD bit cleared
as descriptor is not allocated in there and it is not valid for HW
usage.

The allocation routine at the entry will fill the descriptor that ntu
points to after it was set to ntu + nb_buffs on previous call.

Even the spec says:
"The tail pointer should be set to one descriptor beyond the last empty
descriptor in host descriptor ring."

Therefore, step away from clearing the status_error0 on ntu + nb_buffs
descriptor.

Fixes: db804cfc ("ice: Use the xsk batched rx allocation interface")
Reported-by: NElza Mathew <elza.mathew@intel.com>
Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: NKiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The 'if (ntu == rx_ring->count)' block in ice_alloc_rx_buffers_zc()
was previously residing in the loop, but after introducing the
batched interface it is used only to wrap-around the NTU descriptor,
thus no more need to assign 'xdp'.

Fixes: db804cfc ("ice: Use the xsk batched rx allocation interface")
Signed-off-by: NAlexander Lobakin <alexandr.lobakin@intel.com>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: NKiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Currently, the zero-copy data path is reusing the memory region that was
initially allocated for an array of struct ice_rx_buf for its own
purposes. This is error prone as it is based on the ice_rx_buf struct
always being the same size or bigger than what the zero-copy path needs.
There can also be old values present in that array giving rise to errors
when the zero-copy path uses it.

Fix this by freeing the ice_rx_buf region and allocating a new array for
the zero-copy path that has the right length and is initialized to zero.

Fixes: 57f7f8b6 ("ice: Use xdp_buf instead of rx_buf for xsk zero-copy")
Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: NKiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Currently we only NULL the xdp_buff pointer in the internal SW ring but
we never give it back to the xsk buffer pool. This means that buffers
can be leaked out of the buff pool and never be used again.

Add missing xsk_buff_free() call to the routine that is supposed to
clean the entries that are left in the ring so that these buffers in the
umem can be used by other sockets.

Also, only go through the space that is actually left to be cleaned
instead of a whole ring.

Fixes: 2d4238f5 ("ice: Add support for AF_XDP")
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: NKiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The MDIO bus speed must be initialized before talking to the PHY the first
time in order to avoid talking to it using a speed that the PHY doesn't
support.

This fixes HW initialization error -17 (IXGBE_ERR_PHY_ADDR_INVALID) on
Denverton CPUs (a.k.a. the Atom C3000 family) on ports with a 10Gb network
plugged in. On those devices, HLREG0[MDCSPD] resets to 1, which combined
with the 10Gb network results in a 24MHz MDIO speed, which is apparently
too fast for the connected PHY. PHY register reads over MDIO bus return
garbage, leading to initialization failure.

Reproduced with Linux kernel 4.19 and 5.15-rc7. Can be reproduced using
the following setup:

* Use an Atom C3000 family system with at least one X552 LAN on the SoC
* Disable PXE or other BIOS network initialization if possible
  (the interface must not be initialized before Linux boots)
* Connect a live 10Gb Ethernet cable to an X550 port
* Power cycle (not reset, doesn't always work) the system and boot Linux
* Observe: ixgbe interfaces w/ 10GbE cables plugged in fail with error -17

Fixes: e84db727 ("ixgbe: Introduce function to control MDIO speed")
Signed-off-by: NCyril Novikov <cnovikov@lynx.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Commit a296d665 ("ixgbe: Add ethtool support to enable 2.5 and 5.0
Gbps support") introduced suppression of the advertisement of NBASE-T
speeds by default, according to Todd Fujinaka to accommodate customers
with network switches which could not cope with advertised NBASE-T
speeds, as posted in the E1000-devel mailing list:

https://sourceforge.net/p/e1000/mailman/message/37106269/

However, the suppression was not documented at all, nor was how to
enable NBASE-T support.

Properly document the NBASE-T suppression and how to enable NBASE-T
support.

Fixes: a296d665 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support")
Reported-by: NRobert Schlabbach <robert_s@gmx.net>
Signed-off-by: NRobert Schlabbach <robert_s@gmx.net>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The LTR maximum value was incorrectly written using the scale from
the LTR minimum value. This would cause incorrect values to be sent,
in cases where the initial calculation lead to different min/max scales.

Fixes: 707abf06 ("igc: Add initial LTR support")
Suggested-by: NDima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: NSasha Neftin <sasha.neftin@intel.com>
Tested-by: NNechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

In `igbvf_probe`, if register_netdev() fails, the program will go to
label err_hw_init, and then to label err_ioremap. In free_netdev() which
is just below label err_ioremap, there is `list_for_each_entry_safe` and
`netif_napi_del` which aims to delete all entries in `dev->napi_list`.
The program has added an entry `adapter->rx_ring->napi` which is added by
`netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has
been freed below label err_hw_init. So this a UAF.

In terms of how to patch the problem, we can refer to igbvf_remove() and
delete the entry before `adapter->rx_ring`.

The KASAN logs are as follows:

[   35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450
[   35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366
[   35.128360]
[   35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14
[   35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[   35.131749] Call Trace:
[   35.132199]  dump_stack_lvl+0x59/0x7b
[   35.132865]  print_address_description+0x7c/0x3b0
[   35.133707]  ? free_netdev+0x1fd/0x450
[   35.134378]  __kasan_report+0x160/0x1c0
[   35.135063]  ? free_netdev+0x1fd/0x450
[   35.135738]  kasan_report+0x4b/0x70
[   35.136367]  free_netdev+0x1fd/0x450
[   35.137006]  igbvf_probe+0x121d/0x1a10 [igbvf]
[   35.137808]  ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf]
[   35.138751]  local_pci_probe+0x13c/0x1f0
[   35.139461]  pci_device_probe+0x37e/0x6c0
[   35.165526]
[   35.165806] Allocated by task 366:
[   35.166414]  ____kasan_kmalloc+0xc4/0xf0
[   35.167117]  foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf]
[   35.168078]  igbvf_probe+0x9c5/0x1a10 [igbvf]
[   35.168866]  local_pci_probe+0x13c/0x1f0
[   35.169565]  pci_device_probe+0x37e/0x6c0
[   35.179713]
[   35.179993] Freed by task 366:
[   35.180539]  kasan_set_track+0x4c/0x80
[   35.181211]  kasan_set_free_info+0x1f/0x40
[   35.181942]  ____kasan_slab_free+0x103/0x140
[   35.182703]  kfree+0xe3/0x250
[   35.183239]  igbvf_probe+0x1173/0x1a10 [igbvf]
[   35.184040]  local_pci_probe+0x13c/0x1f0

Fixes: d4e0fe01 (igbvf: add new driver to support 82576 virtual functions)
Reported-by: NZheyu Ma <zheyuma97@gmail.com>
Signed-off-by: NLetu Ren <fantasquex@gmail.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Move checking condition of VF MAC filter before clearing
or adding MAC filter to VF to prevent potential blackout caused
by removal of necessary and working VF's MAC filter.

Fixes: 1b8b062a ("igb: add VF trust infrastructure")
Signed-off-by: NKaren Sornek <karen.sornek@intel.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The driver has to check if it does not accidentally put the timestamp in
the SKB before previous timestamp gets overwritten.
Timestamp values in the PHY are read only and do not get cleared except
at hardware reset or when a new timestamp value is captured.
The cached_tstamp field is used to detect the case where a new timestamp
has not yet been captured, ensuring that we avoid sending stale
timestamp data to the stack.

Fixes: ea9b847c ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: NKarol Kolacinski <karol.kolacinski@intel.com>
Tested-by: NGurucharan G <gurucharanx.g@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Change the division in ice_ptp_adjfine from div_u64 to div64_u64.
div_u64 is used when the divisor is 32 bit but in this case incval is
64 bit and it caused incorrect calculations and incval adjustments.

Fixes: 06c16d89 ("ice: register 1588 PTP clock device object for E810 devices")
Signed-off-by: NKarol Kolacinski <karol.kolacinski@intel.com>
Tested-by: NGurucharan G <gurucharanx.g@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The watchdog task incorrectly changes the state to __IAVF_RESETTING,
instead of letting the reset task take care of that. This was already
resolved by commit 22c8fd71 ("iavf: do not override the adapter
state in the watchdog task") but the problem was reintroduced by the
recent code refactoring in commit 45eebd62 ("iavf: Refactor iavf
state machine tracking").

Fixes: 45eebd62 ("iavf: Refactor iavf state machine tracking")
Signed-off-by: NStefan Assmann <sassmann@kpanic.de>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

This code was re-organized and there some unlocks missing now.

Fixes: 898ef1cb ("iavf: Combine init and watchdog state machines")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The driver was zeroing live stats that could be fetched by
ndo_get_stats64 at any time. This could result in inconsistent
statistics, and the telltale sign was when reading stats frequently from
/proc/net/dev, the stats would go backwards.

Fix by collecting stats into a local, and delaying when we write to the
structure so it's not incremental.

Fixes: fcea6f3d ("ice: Add stats and ethtool support")
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NGurucharan G <gurucharanx.g@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Adding filters with the same values inside for VXLAN and Geneve causes HW
error, because it looks exactly the same. To choose between different
type of tunnels new recipe is needed. Add storing tunnel types in
creating recipes function and start checking it in finding function.

Change getting open tunnels function to return port on correct tunnel
type. This is needed to copy correct port to dummy packet.

Block user from adding enc_dst_port via tc flower, because VXLAN and
Geneve filters can be created only with destination port which was
previously opened.

Fixes: 8b032a55 ("ice: low level support for tunnels")
Signed-off-by: NMichal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: NSandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

In tunnels packet there can be two UDP headers:
- outer which for hw should be mark as ICE_UDP_OF
- inner which for hw should be mark as ICE_UDP_ILOS or as ICE_TCP_IL if
  inner header is of TCP type

In none tunnels packet header can be:
- UDP, which for hw should be mark as ICE_UDP_ILOS
- TCP, which for hw should be mark as ICE_TCP_IL

Change incorrect ICE_UDP_OF for none tunnel packets to ICE_UDP_ILOS.
ICE_UDP_OF is incorrect for none tunnel packets and setting it leads to
error from hw while adding this kind of recipe.

In summary, for tunnel outer port type should always be set to
ICE_UDP_OF, for none tunnel outer and tunnel inner it should always be
set to ICE_UDP_ILOS.

Fixes: 9e300987 ("ice: VXLAN and Geneve TC support")
Signed-off-by: NMichal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: NSandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

If the hardware is constantly receiving unicast or broadcast packets
during driver load, the device previously counted many GLV_RDPC (VSI
dropped packets) events during init. This causes confusing dropped
packet statistics during driver load. The dropped packets counter
incrementing does stop once the driver finishes loading.

Avoid this problem by baselining our statistics at the end of driver
open instead of the end of probe.

Fixes: cdedef59 ("ice: Configure VSIs for Tx/Rx")
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NGurucharan G <gurucharanx.g@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The patch that implemented DSCP QoS implementation removed a
bandwidth check that was used to check for a specific condition
caused by some corner cases.  This check should not of been
removed.

The same patch also added a check for when the DCBx state could
be changed in relation to DSCP, but the check was erroneously
added nested in a check for CEE mode, which made the check useless.

Fix these problems by re-adding the bandwidth check and relocating
the DSCP mode check earlier in the function that changes DCBx state
in the driver.

Fixes: 2a87bd73 ("ice: Add DSCP support")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NDave Ertman <david.m.ertman@intel.com>
Tested-by: NGurucharan G <gurucharanx.g@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The other interrupt cause register (OICR), global interrupt 0, is
disabled when enabling VFs to prevent handling VFLR. If the OICR is
not rearmed then the VF cannot communicate with the PF.

Rearm the OICR after enabling VFs.

Fixes: 916c7fdf ("ice: Separate VF VSI initialization/creation from reset flow")
Signed-off-by: NPaul Greenwalt <paul.greenwalt@intel.com>
Tested-by: NTony Brelinski <tony.brelinski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

When VF is being reset, ice_reset_vf() will be called and FDIR
resource should be released and initialized again.

Fixes: 1f7ea1cd ("ice: Enable FDIR Configure for AVF")
Signed-off-by: NYahui Cao <yahui.cao@intel.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

When trying to dump VFs VSI RX/TX descriptors
using debugfs there was a crash
due to NULL pointer dereference in i40e_dbg_dump_desc.
Added a check to i40e_dbg_dump_desc that checks if
VSI type is correct for dumping RX/TX descriptors.

Fixes: 02e9c290 ("i40e: debugfs interface")
Signed-off-by: NSylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: NNorbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: NMateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: NGurucharan G <gurucharanx.g@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

After setting pre-set combined to 16 queues and reserving 16 queues by
tc qdisc, pre-set maximum combined queues returned to default value
after VF reset being 4 and this generated errors during removing tc.
Fixed by removing clear num_req_queues before reset VF.

Fixes: e284fc28 (i40e: Add and delete cloud filter)
Signed-off-by: NGrzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: NMateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: NBindushree P <Bindushree.p@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Fix failed operation code appearing if handling messages from VF.
Implemented by waiting for VF appropriate state if request starts
handle while VF reset.
Without this patch the message handling request while VF is in
a reset state ends with error -5 (I40E_ERR_PARAM).

Fixes: 5c3c48ac ("i40e: implement virtual device interface")
Signed-off-by: NGrzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: NKaren Sornek <karen.sornek@intel.com>
Tested-by: NTony Brelinski <tony.brelinski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

iavf_set_ringparams doesn't communicate to the user that

1. The user requested descriptor count is out of range. Instead it
   just quietly sets descriptors to the "clamped" value and calls it
   done. This makes it look an invalid value was successfully set as
   the descriptor count when this isn't actually true.

2. The user provided descriptor count needs to be inflated for alignment
   reasons.

This behavior is confusing. The ice driver has already addressed this
by rejecting invalid values for descriptor count and
messaging for alignment adjustments.
Do the same thing here by adding the error and info messages.

Fixes: fbb7ddfe ("i40evf: core ethtool functionality")
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: NMichal Maloszewski <michal.maloszewski@intel.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

If the PF experiences an FLR, the VF's MSI and MSI-X configuration will
be conveniently and silently removed in the process. When this happens,
reset recovery will appear to complete normally but no traffic will
pass. The netdev watchdog will helpfully notify everyone of this issue.

To prevent such public embarrassment, restore MSI configuration at every
reset. For normal resets, this will do no harm, but for VF resets
resulting from a PF FLR, this will keep the VF working.

Fixes: 5eae00c5 ("i40evf: main driver core")
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NGeorge Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Fix a bug in which the receiving of packets can stop in the zero-copy
driver. Ice HW ignores 3 lower bits from QRX_TAIL register, which means
that tail is bumped only on intervals of 8. Currently with XSK RX
batching in place, ice_alloc_rx_bufs_zc() clears the status_error0 only
of the last descriptor that has been allocated/taken from the XSK buffer
pool. status_error0 includes DD bit that is looked upon by the
ice_clean_rx_irq_zc() to tell if a descriptor can be processed.

The bug can be triggered when driver updates the ntu but not the
QRX_TAIL, so HW wouldn't have a chance to write to the ready
descriptors. Later on driver moves the ntc to the mentioned set of
descriptors and interprets them as a ready to be processed, since
corresponding DD bits were not cleared nor any writeback has happened
that would clear it. This can then lead to ntc == ntu case which means
that ring is empty and no further packet processing.

Fix the XSK traffic hang that can be observed when l2fwd scenario from
xdpsock is used by making sure that status_error0 is cleared for each
descriptor that is fed to HW and therefore we are sure that driver will
not processed non-valid DD bits. This will also prevent the driver from
processing the descriptors that were allocated in favor of the
previously processed ones, but writeback didn't happen yet.

Fixes: db804cfc ("ice: Use the xsk batched rx allocation interface")
Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: NAlexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Oleksandr brought a bug report where netpoll causes trace
messages in the log on igb.

Danielle brought this back up as still occurring, so we'll try
again.

[22038.710800] ------------[ cut here ]------------
[22038.710801] igb_poll+0x0/0x1440 [igb] exceeded budget in poll
[22038.710802] WARNING: CPU: 12 PID: 40362 at net/core/netpoll.c:155 netpoll_poll_dev+0x18a/0x1a0

As Alex suggested, change the driver to return work_done at the
exit of napi_poll, which should be safe to do in this driver
because it is not polling multiple queues in this single napi
context (multiple queues attached to one MSI-X vector). Several
other drivers contain the same simple sequence, so I hope
this will not create new problems.

Fixes: 16eb8815 ("igb: Refactor clean_rx_irq to reduce overhead and improve performance")
Reported-by: NOleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: NDanielle Ratson <danieller@nvidia.com>
Suggested-by: NAlexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NOleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: NDanielle Ratson <danieller@nvidia.com>
Link: https://lore.kernel.org/r/20211123204000.1597971-1-jesse.brandeburg@intel.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Ice driver has the routines for managing XDP resources that are shared
between ndo_bpf op and VSI rebuild flow. The latter takes place for
example when user changes queue count on an interface via ethtool's
set_channels().

There is an issue around the bpf_prog refcounting when VSI is being
rebuilt - since ice_prepare_xdp_rings() is called with vsi->xdp_prog as
an argument that is used later on by ice_vsi_assign_bpf_prog(), same
bpf_prog pointers are swapped with each other. Then it is also
interpreted as an 'old_prog' which in turn causes us to call
bpf_prog_put on it that will decrement its refcount.

Below splat can be interpreted in a way that due to zero refcount of a
bpf_prog it is wiped out from the system while kernel still tries to
refer to it:

[  481.069429] BUG: unable to handle page fault for address: ffffc9000640f038
[  481.077390] #PF: supervisor read access in kernel mode
[  481.083335] #PF: error_code(0x0000) - not-present page
[  481.089276] PGD 100000067 P4D 100000067 PUD 1001cb067 PMD 106d2b067 PTE 0
[  481.097141] Oops: 0000 [#1] PREEMPT SMP PTI
[  481.101980] CPU: 12 PID: 3339 Comm: sudo Tainted: G           OE     5.15.0-rc5+ #1
[  481.110840] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016
[  481.122021] RIP: 0010:dev_xdp_prog_id+0x25/0x40
[  481.127265] Code: 80 00 00 00 00 0f 1f 44 00 00 89 f6 48 c1 e6 04 48 01 fe 48 8b 86 98 08 00 00 48 85 c0 74 13 48 8b 50 18 31 c0 48 85 d2 74 07 <48> 8b 42 38 8b 40 20 c3 48 8b 96 90 08 00 00 eb e8 66 2e 0f 1f 84
[  481.148991] RSP: 0018:ffffc90007b63868 EFLAGS: 00010286
[  481.155034] RAX: 0000000000000000 RBX: ffff889080824000 RCX: 0000000000000000
[  481.163278] RDX: ffffc9000640f000 RSI: ffff889080824010 RDI: ffff889080824000
[  481.171527] RBP: ffff888107af7d00 R08: 0000000000000000 R09: ffff88810db5f6e0
[  481.179776] R10: 0000000000000000 R11: ffff8890885b9988 R12: ffff88810db5f4bc
[  481.188026] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[  481.196276] FS:  00007f5466d5bec0(0000) GS:ffff88903fb00000(0000) knlGS:0000000000000000
[  481.205633] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  481.212279] CR2: ffffc9000640f038 CR3: 000000014429c006 CR4: 00000000003706e0
[  481.220530] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  481.228771] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  481.237029] Call Trace:
[  481.239856]  rtnl_fill_ifinfo+0x768/0x12e0
[  481.244602]  rtnl_dump_ifinfo+0x525/0x650
[  481.249246]  ? __alloc_skb+0xa5/0x280
[  481.253484]  netlink_dump+0x168/0x3c0
[  481.257725]  netlink_recvmsg+0x21e/0x3e0
[  481.262263]  ____sys_recvmsg+0x87/0x170
[  481.266707]  ? __might_fault+0x20/0x30
[  481.271046]  ? _copy_from_user+0x66/0xa0
[  481.275591]  ? iovec_from_user+0xf6/0x1c0
[  481.280226]  ___sys_recvmsg+0x82/0x100
[  481.284566]  ? sock_sendmsg+0x5e/0x60
[  481.288791]  ? __sys_sendto+0xee/0x150
[  481.293129]  __sys_recvmsg+0x56/0xa0
[  481.297267]  do_syscall_64+0x3b/0xc0
[  481.301395]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  481.307238] RIP: 0033:0x7f5466f39617
[  481.311373] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb bd 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2f 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[  481.342944] RSP: 002b:00007ffedc7f4308 EFLAGS: 00000246 ORIG_RAX: 000000000000002f
[  481.361783] RAX: ffffffffffffffda RBX: 00007ffedc7f5460 RCX: 00007f5466f39617
[  481.380278] RDX: 0000000000000000 RSI: 00007ffedc7f5360 RDI: 0000000000000003
[  481.398500] RBP: 00007ffedc7f53f0 R08: 0000000000000000 R09: 000055d556f04d50
[  481.416463] R10: 0000000000000077 R11: 0000000000000246 R12: 00007ffedc7f5360
[  481.434131] R13: 00007ffedc7f5350 R14: 00007ffedc7f5344 R15: 0000000000000e98
[  481.451520] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mxm_wmi mei_me coretemp mei ipmi_si ipmi_msghandler wmi acpi_pad acpi_power_meter ip_tables x_tables autofs4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel ahci crypto_simd cryptd libahci lpc_ich [last unloaded: ice]
[  481.528558] CR2: ffffc9000640f038
[  481.542041] ---[ end trace d1f24c9ecf5b61c1 ]---

Fix this by only calling ice_vsi_assign_bpf_prog() inside
ice_prepare_xdp_rings() when current vsi->xdp_prog pointer is NULL.
This way set_channels() flow will not attempt to swap the vsi->xdp_prog
pointers with itself.

Also, sprinkle around some comments that provide a reasoning about
correlation between driver and kernel in terms of bpf_prog refcount.

Fixes: efc2214b ("ice: Add support for XDP")
Reviewed-by: NAlexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: NMarta Plantykow <marta.a.plantykow@intel.com>
Co-developed-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: NKiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The approach of having XDP queue per CPU regardless of user's setting
exposed a hidden bug that could occur in case when Rx queue count differ
from Tx queue count. Currently vsi->txq_map's size is equal to the
doubled vsi->alloc_txq, which is not correct due to the fact that XDP
rings were previously based on the Rx queue count. Below splat can be
seen when ethtool -L is used and XDP rings are configured:

[  682.875339] BUG: kernel NULL pointer dereference, address: 000000000000000f
[  682.883403] #PF: supervisor read access in kernel mode
[  682.889345] #PF: error_code(0x0000) - not-present page
[  682.895289] PGD 0 P4D 0
[  682.898218] Oops: 0000 [#1] PREEMPT SMP PTI
[  682.903055] CPU: 42 PID: 2878 Comm: ethtool Tainted: G           OE     5.15.0-rc5+ #1
[  682.912214] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016
[  682.923380] RIP: 0010:devres_remove+0x44/0x130
[  682.928527] Code: 49 89 f4 55 48 89 fd 4c 89 ff 53 48 83 ec 10 e8 92 b9 49 00 48 8b 9d a8 02 00 00 48 8d 8d a0 02 00 00 49 89 c2 48 39 cb 74 0f <4c> 3b 63 10 74 25 48 8b 5b 08 48 39 cb 75 f1 4c 89 ff 4c 89 d6 e8
[  682.950237] RSP: 0018:ffffc90006a679f0 EFLAGS: 00010002
[  682.956285] RAX: 0000000000000286 RBX: ffffffffffffffff RCX: ffff88908343a370
[  682.964538] RDX: 0000000000000001 RSI: ffffffff81690d60 RDI: 0000000000000000
[  682.972789] RBP: ffff88908343a0d0 R08: 0000000000000000 R09: 0000000000000000
[  682.981040] R10: 0000000000000286 R11: 3fffffffffffffff R12: ffffffff81690d60
[  682.989282] R13: ffffffff81690a00 R14: ffff8890819807a8 R15: ffff88908343a36c
[  682.997535] FS:  00007f08c7bfa740(0000) GS:ffff88a03fd00000(0000) knlGS:0000000000000000
[  683.006910] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  683.013557] CR2: 000000000000000f CR3: 0000001080a66003 CR4: 00000000003706e0
[  683.021819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  683.030075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  683.038336] Call Trace:
[  683.041167]  devm_kfree+0x33/0x50
[  683.045004]  ice_vsi_free_arrays+0x5e/0xc0 [ice]
[  683.050380]  ice_vsi_rebuild+0x4c8/0x750 [ice]
[  683.055543]  ice_vsi_recfg_qs+0x9a/0x110 [ice]
[  683.060697]  ice_set_channels+0x14f/0x290 [ice]
[  683.065962]  ethnl_set_channels+0x333/0x3f0
[  683.070807]  genl_family_rcv_msg_doit+0xea/0x150
[  683.076152]  genl_rcv_msg+0xde/0x1d0
[  683.080289]  ? channels_prepare_data+0x60/0x60
[  683.085432]  ? genl_get_cmd+0xd0/0xd0
[  683.089667]  netlink_rcv_skb+0x50/0xf0
[  683.094006]  genl_rcv+0x24/0x40
[  683.097638]  netlink_unicast+0x239/0x340
[  683.102177]  netlink_sendmsg+0x22e/0x470
[  683.106717]  sock_sendmsg+0x5e/0x60
[  683.110756]  __sys_sendto+0xee/0x150
[  683.114894]  ? handle_mm_fault+0xd0/0x2a0
[  683.119535]  ? do_user_addr_fault+0x1f3/0x690
[  683.134173]  __x64_sys_sendto+0x25/0x30
[  683.148231]  do_syscall_64+0x3b/0xc0
[  683.161992]  entry_SYSCALL_64_after_hwframe+0x44/0xae

Fix this by taking into account the value that num_possible_cpus()
yields in addition to vsi->alloc_txq instead of doubling the latter.

Fixes: efc2214b ("ice: Add support for XDP")
Fixes: 22bf877e ("ice: introduce XDP_TX fallback path")
Reviewed-by: NAlexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: NKiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

When a VF goes through a reset, it's possible for the VF's feature set
to change. For example it may lose the VIRTCHNL_VF_OFFLOAD_VLAN
capability after VF reset. Unfortunately, the driver doesn't correctly
deal with this situation and errors are seen from downing/upping the
interface and/or moving the interface in/out of a network namespace.

When setting the interface down/up we see the following errors after the
VIRTCHNL_VF_OFFLOAD_VLAN capability was taken away from the VF:

ice 0000:51:00.1: VF 1 failed opcode 12, retval: -64 iavf 0000:51:09.1:
Failed to add VLAN filter, error IAVF_NOT_SUPPORTED ice 0000:51:00.1: VF
1 failed opcode 13, retval: -64 iavf 0000:51:09.1: Failed to delete VLAN
filter, error IAVF_NOT_SUPPORTED

These add/delete errors are happening because the VLAN filters are
tracked internally to the driver and regardless of the VLAN_ALLOWED()
setting the driver tries to delete/re-add them over virtchnl.

Fix the delete failure by making sure to delete any VLAN filter tracking
in the driver when a removal request is made, while preventing the
virtchnl request.  This makes it so the driver's VLAN list is up to date
and the errors are

Fix the add failure by making sure the check for VLAN_ALLOWED() during
reset is done after the VF receives its capability list from the PF via
VIRTCHNL_OP_GET_VF_RESOURCES. If VLAN functionality is not allowed, then
prevent requesting re-adding the filters over virtchnl.

When moving the interface into a network namespace we see the following
errors after the VIRTCHNL_VF_OFFLOAD_VLAN capability was taken away from
the VF:

iavf 0000:51:09.1 enp81s0f1v1: NIC Link is Up Speed is 25 Gbps Full Duplex
iavf 0000:51:09.1 temp_27: renamed from enp81s0f1v1
iavf 0000:51:09.1 mgmt: renamed from temp_27
iavf 0000:51:09.1 dev27: set_features() failed (-22); wanted 0x020190001fd54833, left 0x020190001fd54bb3

These errors are happening because we aren't correctly updating the
netdev capabilities and dealing with ndo_fix_features() and
ndo_set_features() correctly.

Fix this by only reporting errors in the driver's ndo_set_features()
callback when VIRTCHNL_VF_OFFLOAD_VLAN is not allowed and any attempt to
enable the VLAN features is made. Also, make sure to disable VLAN
insertion, filtering, and stripping since the VIRTCHNL_VF_OFFLOAD_VLAN
flag applies to all of them and not just VLAN stripping.

Also, after we process the capabilities in the VF reset path, make sure
to call netdev_update_features() in case the capabilities have changed
in order to update the netdev's feature set to match the VF's actual
capabilities.

Lastly, make sure to always report success on VLAN filter delete when
VIRTCHNL_VF_OFFLOAD_VLAN is not supported. The changed flow in
iavf_del_vlans() allows the stack to delete previosly existing VLAN
filters even if VLAN filtering is not allowed. This makes it so the VLAN
filter list is up to date.

Fixes: 8774370d ("i40e/i40evf: support for VF VLAN tag stripping control")
Signed-off-by: NBrett Creeley <brett.creeley@intel.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Currently iavf adapter statistics are refreshed only in a
watchdog task, triggered approximately every two seconds,
which causes some ethtool requests to return outdated values.

Add explicit statistics refresh when requested by ethtool -S.

Fixes: b476b003 ("iavf: Move commands processing to the separate function")
Signed-off-by: NJan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: NJedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

System hangs if close the interface is called from the kernel during
the interface is in resetting state.
During resetting operation the link is closing but kernel didn't
know it and it tried to close this interface again what sometimes
led to deadlock.
Inform kernel about current state of interface
and turn off the flag IFF_UP when interface is closing until reset
is finished.
Previously it was most likely to hang the system when kernel
(network manager) tried to close the interface in the same time
when interface was in resetting state because of deadlock.

Fixes: 3c8e0b98 ("i40vf: don't stop me now")
Signed-off-by: NJaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: NJedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Resolve being able to change static values on VF when adaptive interrupt
moderation is enabled.

This problem is fixed by checking the interrupt settings is not
a combination of change of static value while adaptive interrupt
moderation is turned on.

Without this fix, the user would be able to change static values
on VF with adaptive moderation enabled.

Fixes: 65e87c03 ("i40evf: support queue-specific settings for interrupt moderation")
Signed-off-by: NNitesh B Venkatesh <nitesh.b.venkatesh@intel.com>
Tested-by: NGeorge Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>