iavf: Fix VLAN feature flags after VFR
When a VF goes through a reset, it's possible for the VF's feature set to change. For example it may lose the VIRTCHNL_VF_OFFLOAD_VLAN capability after VF reset. Unfortunately, the driver doesn't correctly deal with this situation and errors are seen from downing/upping the interface and/or moving the interface in/out of a network namespace. When setting the interface down/up we see the following errors after the VIRTCHNL_VF_OFFLOAD_VLAN capability was taken away from the VF: ice 0000:51:00.1: VF 1 failed opcode 12, retval: -64 iavf 0000:51:09.1: Failed to add VLAN filter, error IAVF_NOT_SUPPORTED ice 0000:51:00.1: VF 1 failed opcode 13, retval: -64 iavf 0000:51:09.1: Failed to delete VLAN filter, error IAVF_NOT_SUPPORTED These add/delete errors are happening because the VLAN filters are tracked internally to the driver and regardless of the VLAN_ALLOWED() setting the driver tries to delete/re-add them over virtchnl. Fix the delete failure by making sure to delete any VLAN filter tracking in the driver when a removal request is made, while preventing the virtchnl request. This makes it so the driver's VLAN list is up to date and the errors are Fix the add failure by making sure the check for VLAN_ALLOWED() during reset is done after the VF receives its capability list from the PF via VIRTCHNL_OP_GET_VF_RESOURCES. If VLAN functionality is not allowed, then prevent requesting re-adding the filters over virtchnl. When moving the interface into a network namespace we see the following errors after the VIRTCHNL_VF_OFFLOAD_VLAN capability was taken away from the VF: iavf 0000:51:09.1 enp81s0f1v1: NIC Link is Up Speed is 25 Gbps Full Duplex iavf 0000:51:09.1 temp_27: renamed from enp81s0f1v1 iavf 0000:51:09.1 mgmt: renamed from temp_27 iavf 0000:51:09.1 dev27: set_features() failed (-22); wanted 0x020190001fd54833, left 0x020190001fd54bb3 These errors are happening because we aren't correctly updating the netdev capabilities and dealing with ndo_fix_features() and ndo_set_features() correctly. Fix this by only reporting errors in the driver's ndo_set_features() callback when VIRTCHNL_VF_OFFLOAD_VLAN is not allowed and any attempt to enable the VLAN features is made. Also, make sure to disable VLAN insertion, filtering, and stripping since the VIRTCHNL_VF_OFFLOAD_VLAN flag applies to all of them and not just VLAN stripping. Also, after we process the capabilities in the VF reset path, make sure to call netdev_update_features() in case the capabilities have changed in order to update the netdev's feature set to match the VF's actual capabilities. Lastly, make sure to always report success on VLAN filter delete when VIRTCHNL_VF_OFFLOAD_VLAN is not supported. The changed flow in iavf_del_vlans() allows the stack to delete previosly existing VLAN filters even if VLAN filtering is not allowed. This makes it so the VLAN filter list is up to date. Fixes: 8774370d ("i40e/i40evf: support for VF VLAN tag stripping control") Signed-off-by: NBrett Creeley <brett.creeley@intel.com> Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Showing
想要评论请 注册 或 登录