We need to be testing the i_flags field in the ext4 specific portion
of the inode, instead of the (confusingly aliased) i_flags field in
the generic struct inode.
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

When an inode gets unlinked, the functions ext4_clear_blocks() and
ext4_remove_blocks() call ext4_forget() for all the buffer heads
corresponding to the deleted inode's data blocks.  If the inode is a
directory or a symlink, the is_metadata parameter must be non-zero so
ext4_forget() will revoke them via jbd2_journal_revoke().  Otherwise,
if these blocks are reused for a data file, and the system crashes
before a journal checkpoint, the journal replay could end up
corrupting these data blocks.

Thanks to Curt Wohlgemuth for pointing out potential problems in this
area.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Now that we are checking for failed journal checksums in the jbd2
layer, we don't need to check in the ext4 mount path --- since a
checksum fail will result in ext4_load_journal() returning an error,
causing the file system to refuse to be mounted until e2fsck can deal
with the problem.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If there is a failed journal checksum, don't reset the journal.  This
allows for userspace programs to decide how to recover from this
situation.  It may be that ignoring the journal checksum failure might
be a better way of recovering the file system.  Once we add per-block
checksums, we can definitely do better.  Until then, a system
administrator can try backing up the file system image (or taking a
snapshot) and and trying to determine experimentally whether ignoring
the checksum failure or aborting the journal replay results in less
data loss.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

One of the invalid error paths in ext4_iget() forgot to brelse() the
inode buffer head.  Fix it by adding a brelse() in the common error
return path, which also simplifies function.

Thanks to Andi Kleen <ak@linux.intel.com> reporting the problem.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Fix a few spelling typos in move_extent.c
Signed-off-by: NAkira Fujita <a-fujita@rs.jp.nec.co.jp>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If CONFIG_PROVE_LOCKING is enabled, the double_down_write_data_sem()
will trigger a false-positive warning of a recursive lock.  Since we
take i_data_sem for the two inodes ordered by their inode numbers,
this isn't a problem.  Use of down_write_nested() will notify the lock
dependency checker machinery that there is no problem here.

This problem was reported by Brian Rogers:

	http://marc.info/?l=linux-ext4&m=125115356928011&w=1Reported-by: NBrian Rogers <brian@xyzw.org>
Signed-off-by: NAkira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ext4_move_extents() checks the logical block contiguousness
of original file with ext4_find_extent() and mext_next_extent().
Therefore the extent which ext4_ext_path structure indicates
must not be changed between above functions.

But in current implementation, there is no i_data_sem protection
between ext4_ext_find_extent() and mext_next_extent().  So the extent
which ext4_ext_path structure indicates may be overwritten by
delalloc.  As a result, ext4_move_extents() will exchange wrong blocks
between original and donor files.  I change the place where
acquire/release i_data_sem to solve this problem.

Moreover, I changed move_extent_per_page() to start transaction first,
and then acquire i_data_sem.  Without this change, there is a
possibility of the deadlock between mmap() and ext4_move_extents():

* NOTE: "A", "B" and "C" mean different processes

A-1: ext4_ext_move_extents() acquires i_data_sem of two inodes.

B:   do_page_fault() starts the transaction (T),
     and then tries to acquire i_data_sem.
     But process "A" is already holding it, so it is kept waiting.

C:   While "A" and "B" running, kjournald2 tries to commit transaction (T)
     but it is under updating, so kjournald2 waits for it.

A-2: Call ext4_journal_start with holding i_data_sem,
     but transaction (T) is locked.
Signed-off-by: NAkira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If the EXT4_IOC_MOVE_EXT ioctl fails, the number of blocks that were
exchanged before the failure should be returned to the userspace
caller.  Unfortunately, currently if the block size is not the same as
the page size, the returned block count that is returned is the
page-aligned block count instead of the actual block count.  This
commit addresses this bug.
Signed-off-by: NAkira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If s_log_groups_per_flex is greater than 31, then groups_per_flex will
will overflow and cause a divide by zero error.  This can cause kernel
BUG if such a file system is mounted.

Thanks to Nageswara R Sastry for analyzing the failure and providing
an initial patch.

http://bugzilla.kernel.org/show_bug.cgi?id=14287Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

Previously add_dirent_to_buf() did not free its passed-in buffer head
in the case of ENOSPC, since in some cases the caller still needed it.
However, this led to potential buffer head leaks since not all callers
dealt with this correctly.  Fix this by making simplifying the freeing
convention; now add_dirent_to_buf() *never* frees the passed-in buffer
head, and leaves that to the responsibility of its caller.  This makes
things cleaner and easier to prove that the code is neither leaking
buffer heads or calling brelse() one time too many.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Curt Wohlgemuth <curtw@google.com>
Cc: stable@kernel.org

Because of an integer overflow on start_blk, various kind of wrong results
would be returned by the generic_block_fiemap() handler, such as no
extents when there is a 4GB+ hole at the beginning of the file, or wrong
fe_logical when an extent starts after the first 4GB.
Signed-off-by: NMike Hommey <mh@glandium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Eric Sandeen <sandeen@sgi.com>
Cc: Josef Bacik <jbacik@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In setup_arg_pages we work hard to assign a value to ret, but on exit we
always return 0.

Also remove a now duplicated exit path and branch to out_unlock instead.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For FS_IOC_RESVSP and FS_IOC_RESVSP64 compat_sys_ioctl() uses its
arg argument as a pointer to userspace. However it is missing a
a call to compat_ptr() which will do a proper pointer conversion.

This was introduced with 3e63cbb1 "fs: Add new pre-allocation ioctls
to vfs for compatibility with legacy xfs ioctls".
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ankit Jain <me@ankitjain.org>
Acked-by: NChristoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: NArnd Bergmann <arndbergmann@googlemail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: <stable@kernel.org>		[2.6.31.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Daniel Lezcano reported a leak in 'struct pid' and 'struct pid_namespace'
that is discussed in:

	http://lkml.org/lkml/2009/10/2/159.

To summarize the thread, when container-init is terminated, it sets the
PF_EXITING flag, zaps other processes in the container and waits to reap
them.  As a part of reaping, the container-init should flush any /proc
dentries associated with the processes.  But because the container-init is
itself exiting and the following PF_EXITING check, the dentries are not
flushed, resulting in leak in /proc inodes and dentries.

This fix reverts the commit 7766755a ("Fix /proc dcache deadlock
in do_exit") which introduced the check for PF_EXITING.  At the time of
the commit, shrink_dcache_parent() flushed dentries from other filesystems
also and could have caused a deadlock which the commit fixed.  But as
pointed out by Eric Biederman, after commit 0feae5c4,
shrink_dcache_parent() no longer affects other filesystems.  So reverting
the commit is now safe.

As pointed out by Jan Kara, the leak is not as critical since the
unclaimed space will be reclaimed under memory pressure or by:

	echo 3 > /proc/sys/vm/drop_caches

But since this check is no longer required, its best to remove it.
Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
Reported-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Acked-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-by: NJan Kara <jack@ucw.cz>
Cc: Andrea Arcangeli <andrea@cpushare.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes:
ERROR: "log_start_commit" [fs/ext3/ext3.ko] undefined!
Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org>

There is a problem where iget5_locked will look for an inode, not find it, and
then subsequently try to allocate it.  Another CPU will have raced in and
allocated the inode instead, so when iget5_locked gets the inode spin lock again
and does a search, it finds the new inode.  So it goes ahead and calls
destroy_inode on the inode it just allocated.  The problem is we don't set
BTRFS_I(inode)->root until the new inode is completely initialized.  This patch
makes us set root to NULL when alloc'ing a new inode, so when we get to
btrfs_destroy_inode and we see that root is NULL we can just free up the memory
and continue on.  This fixes the panic

http://www.kerneloops.org/submitresult.php?number=812690

Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

On an FS where all of the space has not been allocated into chunks yet,
the enospc can return enospc just because the existing metadata chunks
are full.

We get around this by allowing more metadata chunks to be allocated up
to a certain limit, and finding the right limit is a little fuzzy.  The
problem is the reservations for delalloc would preallocate way too much
of the FS as metadata.  We need to start saying no and just force some
IO to happen.

But we also need to let a reasonable amount of the FS become metadata.
This bumps the hard limit up, later releases will have a better system.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Currently compressed IO does not deal with not having its entire extent able to
be allocated.  So if we have enough free space to allocate for the extent, but
its not contiguous, it will fail spectacularly.  This patch fixes this by
falling back on uncompressed IO which lets us spread the delalloc extent across
multiple extents.  I tested this by making us randomly think the reservation had
failed to make it fallback on the uncompressed io way and it seemed to work
fine.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch changes a few things.  Hopefully the comments are helpfull, but
I'll try and be as verbose here.

Problem:

My fedora box was taking 1 minute and 21 seconds to boot with btrfs as root.
Part of this problem was we pick the first block group we can find and start
caching it, even if it may not have enough free space.  The other problem is
we only search for cached block groups the first time around, which we won't
find any cached block groups because this is a newly mounted fs, so we end up
caching several block groups during bootup, which with alot of fragmentation
takes around 30-45 seconds to complete, which bogs down the system.  So

Solution:

1) Don't cache block groups willy-nilly at first.  Instead try and figure out
which block group has the most free, and therefore will take the least amount
of time to cache.

2) Don't be so picky about cached block groups.  The other problem is once
we've filled up a cluster, if the block group isn't finished caching the next
time we try and do the allocation we'll completely ignore the cluster and
start searching from the beginning of the space, which makes us cache more
block groups, which slows us down even more.  So instead of skipping block
groups that are not finished caching when we have a hint, only skip the block
group if it hasn't started caching yet.

There is one other tweak in here.  Before if we allocated a chunk and still
couldn't find new space, we'd end up switching the space info to force another
chunk allocation.  This could make us end up with way too many chunks, so keep
track of this particular case.

With this patch and my previous cluster fixes my fedora box now boots in 43
seconds, and according to the bootchart is not held up by our block group
caching at all.
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

I re-orderred the checks to avoid dereferencing "em" if it was null.

Found by smatch static checker.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We don't need to call btrfs_release_path because btrfs_free_path will do
that for us.
Signed-off-by: NLi Dongyang <Jerry87905@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We weren't reserving metadata space for rename, rmdir and unlink, which could
cause problems.
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch fixes a problem where max_size can be set to 0 even though we
filled the cluster properly.  We set max_size to 0 if we restart the cluster
window, but if the new start entry is big enough to be our new cluster then we
could return with a max_size set to 0, which will mean the next time we try to
allocate from this cluster it will fail.  So set max_extent to the entry's
size.  Tested this on my box and now we actually allocate from the cluster
after we fill it.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We use journal_info to tell if we're in a nested transaction to make sure we
don't commit the transaction within a nested transaction.  We use another
method to see if there are any outstanding ioctl trans handles, so if we're
starting one do not set current->journal_info, since it will screw with other
filesystems.  This patch also cleans up the starting stuff so there aren't any
magic numbers.
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Sometimes our start allocation hint when we cow a file can be either
EXTENT_HOLE or some other such place holder, which is not optimal.  So if we
find that our em->block_start is one of these special values, check to see
where the first block of the inode is stored, and use that as a hint.  If that
block is also a special value, just fallback on a hint of 0 and let the
allocator figure out a good place to put the data.
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

If journal init fails, we need to free j_wbuf.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>

We cannot rely on buffer dirty bits during fsync because pdflush can come
before fsync is called and clear dirty bits without forcing a transaction
commit. What we do is that we track which transaction has last changed
the inode and which transaction last changed allocation and force it to
disk on fsync.
Signed-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

On a 256M 4k block filesystem, doing this in a loop:

    dd if=/dev/zero of=test oflag=direct bs=1M count=64
    rm -f test

eventually leads to spurious ENOSPC:

    dd: writing `test': No space left on device

As with other block allocation callers, it looks like we need to
potentially retry the allocations on the initial ENOSPC.

A similar patch went into ext4 (commit
fbbf6945)
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJan Kara <jack@suse.cz>

This is a partial revert of commit 6487a9d3 (only the changes made to
fs/ext4/namei.c), since it is causing the following brelse()
double-free warning when running fsstress on a file system with 1k
blocksize and we run into a block allocation failure while converting
a single-block directory to a multi-block hash-tree indexed directory.

WARNING: at fs/buffer.c:1197 __brelse+0x2e/0x33()
Hardware name: 
VFS: brelse: Trying to free free buffer
Modules linked in:
Pid: 2226, comm: jbd2/sdd-8 Not tainted 2.6.32-rc6-00577-g0003f55 #101
Call Trace:
 [<c01587fb>] warn_slowpath_common+0x65/0x95
 [<c0158869>] warn_slowpath_fmt+0x29/0x2c
 [<c021168e>] __brelse+0x2e/0x33
 [<c0288a9f>] jbd2_journal_refile_buffer+0x67/0x6c
 [<c028a9ed>] jbd2_journal_commit_transaction+0x319/0x14d8
 [<c0164d73>] ? try_to_del_timer_sync+0x58/0x60
 [<c0175bcc>] ? sched_clock_cpu+0x12a/0x13e
 [<c017f6b4>] ? trace_hardirqs_off+0xb/0xd
 [<c0175c1f>] ? cpu_clock+0x3f/0x5b
 [<c017f6ec>] ? lock_release_holdtime+0x36/0x137
 [<c0664ad0>] ? _spin_unlock_irqrestore+0x44/0x51
 [<c0180af3>] ? trace_hardirqs_on_caller+0x103/0x124
 [<c0180b1f>] ? trace_hardirqs_on+0xb/0xd
 [<c0164d73>] ? try_to_del_timer_sync+0x58/0x60
 [<c0290d1c>] kjournald2+0x11a/0x310
 [<c017118e>] ? autoremove_wake_function+0x0/0x38
 [<c0290c02>] ? kjournald2+0x0/0x310
 [<c0170ee6>] kthread+0x66/0x6b
 [<c0170e80>] ? kthread+0x0/0x6b
 [<c01251b3>] kernel_thread_helper+0x7/0x10
---[ end trace 5579351b86af61e3 ]---

Commit 6487a9d3 was an attempt some buffer head leaks in an ENOSPC
error path, but in some cases it actually results in an excess ENOSPC,
as shown above.  Fixing this means cleaning up who is responsible for
releasing the buffer heads from the callee to the caller of
add_dirent_to_buf().

Since that's a relatively complex change, and we're late in the rcX
development cycle, I'm reverting this now, and holding back a more
complete fix until after 2.6.32 ships.  We've lived with this
buffer_head leak on ENOSPC in ext3 and ext4 for a very long time; a
few more months won't kill us.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Curt Wohlgemuth <curtw@google.com>

This fixes an -rc1 regression brought by the commit:
1cf58fa8 ("nilfs2: shorten freeze
period due to GC in write operation v3").

Although the patch moved out a function call of
nilfs_ioctl_move_blocks() to nilfs_ioctl_clean_segments() from
nilfs_ioctl_prepare_clean_segments(), it didn't move corresponding
cleanup job needed for the error case.

This will move the missing cleanup job to the destination function.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: NJiro SEKIBA <jir@unicus.jp>

This fixes a kernel oops reported by Markus Trippelsdorf in the email
titled "[NILFS users] kernel Oops while running nilfs_cleanerd".

The oops was caused by a bug of error path in
nilfs_ioctl_move_blocks() function, which was inlined in
nilfs_ioctl_clean_segments().

nilfs_ioctl_move_blocks checks duplication of blocks which will be
moved in garbage collection.  But, the check should have be done
within nilfs_ioctl_move_inode_block() to prevent list corruption among
buffers storing the target blocks.

To fix the kernel oops, this moves forward the duplication check
before the list insertion.

I also tested this for stable trees [2.6.30, 2.6.31].
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable <stable@kernel.org>

Because it's lighter weight, CIFS tries to use CIFSGetSrvInodeNumber to
verify the accessibility of the root inode and then falls back to doing a
full QPathInfo if that fails with -EOPNOTSUPP. I have at least a report
of a server that returns NT_STATUS_INTERNAL_ERROR rather than something
that translates to EOPNOTSUPP.

Rather than trying to be clever with that call, just have
is_path_accessible do a normal QPathInfo. That call is widely
supported and it shouldn't increase the overhead significantly.

Cc: Stable <stable@kernel.org>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

It's possible that a server will return a valid FileID when we query the
FILE_INTERNAL_INFO for the root inode, but then zeroed out inode numbers
when we do a FindFile with an infolevel of
SMB_FIND_FILE_ID_FULL_DIR_INFO.

In this situation turn off querying for server inode numbers, generate a
warning for the user and just generate an inode number using iunique.
Once we generate any inode number with iunique we can no longer use any
server inode numbers or we risk collisions, so ensure that we don't do
that in cifs_get_inode_info either.

Cc: Stable <stable@kernel.org>
Reported-by: NTimothy Normand Miller <theosib@gmail.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

To prepare for a direct I/O write, we need to split the unwritten
extents before submitting the I/O.  When no extents needed to be
split, ext4_split_unwritten_extents() was incorrectly returning 0
instead of the size of uninitialized extents. This bug caused the
wrong return value sent back to VFS code when it gets called from
async IO path, leading to an unnecessary fall back to buffered IO.

This bug also hid the fact that the check to see whether or not a
split would be necessary was incorrect; we can only skip splitting the
extent if the write completely covers the uninitialized extent.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

While refreshing my sysfs patches I noticed a leak in the secdata
implementation.  We don't free the secdata when we free the
sysfs dirent.

This is a bug in 2.6.32-rc5 that we really should close.
Signed-off-by: NEric W. Biederman <ebiederm@aristanetworks.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

This patch fixes two issues in the procfs stack information on
x86-64 linux.

The 32 bit loader compat_do_execve did not store stack
start. (this was figured out by Alexey Dobriyan).

The stack information on a x64_64 kernel always shows 0 kbyte
stack usage, because of a missing implementation of the KSTK_ESP
macro which always returned -1.

The new implementation now returns the right value.
Signed-off-by: NStefani Seibold <stefani@seibold.net>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1257240160.4889.24.camel@wall-e>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Invalidate the target's attributes, which may have changed (such as
nlink, change time) so that they are refreshed on the next getattr().
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Looks like another victim of the confusing kmap() vs kmap_atomic() API
differences.
Reported-by: NTodor Gyumyushev <yodor1@gmail.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org