USE_PM_CLK_RUNTIME_OPS is introduced so we don't repeat the same code
to do runtime_suspend and runtime_resume across users of PM clocks.
Use it to remove the boilerplate code.
Signed-off-by: NRajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

After commit b2b49ccb (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere in the code under
arch/arm/ (the defconfig files will be modified later).
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NNishanth Menon <nm@ti.com>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>

Commit 25c7d49e ("ARM: OMAP: Make
omap_device local to mach-omap2") broke an OMAP5912-only build here:

arch/arm/mach-omap1/pm_bus.c: In function 'omap1_pm_runtime_init':
arch/arm/mach-omap1/pm_bus.c:69:2: error: implicit declaration of function
'cpu_class_is_omap1'
make[1]: *** [arch/arm/mach-omap1/pm_bus.o] Error 1

Fix by adding a missing include.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>

We must move this for ARM common zImage support.

Note that neither drivers/media/rc/ir-rx51.c or
drivers/media/platform/omap3isp/ispvideo.c need
to include omap-pm.h, so this patch removes the
include for those files.
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Cc: linux-media@vger.kernel.org
Signed-off-by: NTony Lindgren <tony@atomide.com>

Let's make omap_device local to mach-omap2 for
ARM common zImage support.
Signed-off-by: NTony Lindgren <tony@atomide.com>

Since the PM clock management code in drivers/base/power/clock_ops.c
is used for both runtime PM and system suspend/hibernation, the
definitions of data structures and headers related to it should not
be located in include/linux/pm_rumtime.h.  Move them to a separate
header file.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

The common PM clock management functions may be used for system
suspend/resume as well as for runtime PM, so rename them
accordingly.  Modify kerneldoc comments describing these functions
and kernel messages printed by them, so that they refer to power
management in general rather that to runtime PM.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: NKevin Hilman <khilman@ti.com>

The naming convention used by commit 7538e3db6e015e890825fbd9f86599b
(PM: Add support for device power domains), which introduced the
struct dev_power_domain type for representing device power domains,
evidently confuses some developers who tend to think that objects
of this type must correspond to "power domains" as defined by
hardware, which is not the case.  Namely, at the kernel level, a
struct dev_power_domain object can represent arbitrary set of devices
that are mutually dependent power management-wise and need not belong
to one hardware power domain.  To avoid that confusion, rename struct
dev_power_domain to struct dev_pm_domain and rename the related
pointers in struct device and struct pm_clk_notifier_block from
pwr_domain to pm_domain.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NKevin Hilman <khilman@ti.com>

When runtime PM is disabled, device clocks need to be enabled on
device add and disabled on device remove.  This currently is not
happening because in the !PM_RUNTIME case, no notifiers are registered
for OMAP1 devices.

Fix this by ensuring notifiers are registered, even in the !PM_RUNTIME case.
Reported-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Convert OMAP1 to using the new generic clock manipulation routines
and a device power domain for runtime PM instead of overriding the
platform bus type's runtime PM callbacks.  This allows us to simplify
OMAP1-specific code and to share some code with other platforms
(shmobile in particular).
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NKevin Hilman <khilman@ti.com>

Fix following compilation warning:
arch/arm/mach-omap1/pm_bus.c: In function 'omap1_pm_runtime_resume':
arch/arm/mach-omap1/pm_bus.c:51: warning: unused variable 'ret'
Signed-off-by: NMarek Belisko <marek.belisko@open-nandra.com>
Acked-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Otherwise multi-omap1 configurations will fail.
Tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: NTony Lindgren <tony@atomide.com>

On OMAP1, we do not have omap_device + omap_hwmod to manage the
device-specific idle, enable and shutdown.  Instead, just
enable/disable device clocks automatically at the runtime PM level.

This allows drivers to not have any OMAP1 specific clock management
and allows them to simply use the runtime PM API to manage clocks.

OMAP1 compile fixes Manjunatha GK <manjugk@ti.com>

Cc: Manjunatha GK <manjugk@ti.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>

Implement the new runtime PM framework as a thin layer on top of the
omap_device API.  OMAP specific runtime PM methods are registered with
the as custom methods on the platform_bus.

In order to determine if a device is an omap_device, its parent device
is checked.  All omap_devices have a new 'omap_device_parent_ device
as their parent device, so checking for this parent is used to check
for valid omap_devices.  If a device is an omap_device, then the
appropriate omap_device functions are called for it.  If not, only the
generic runtime PM functions are called.

Device driver's ->runtime_idle() hook is called when the runtime PM
usecount reaches zero for that device.  Driver's ->runtime_suspend()
hooks are called just before the device is disabled (via
omap_device_idle()), and device driver ->runtime_resume() hooks are
called just after device has been enabled (via omap_device_enable().)

OMAP4 build support from Rajendra Nayak <rnayak@ti.com>.
OMAP2 build support from Charulatha V <charu@ti.com>

Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Charulatha V <charu@ti.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>