This patch introduces basic facilities to support config different slots
in a BPF map one by one.

array.nr_ranges and array.ranges are introduced into 'struct
parse_events_term', where ranges is an array of indices range (start,
length) which will be configured by this config term. nr_ranges is the
size of the array. The array is passed to 'struct bpf_map_priv'.  To
indicate the new type of configuration, BPF_MAP_KEY_RANGES is added as a
new key type. bpf_map_config_foreach_key() is extended to iterate over
those indices instead of all possible keys.

Code in this commit will be enabled by following commit which enables
the indices syntax for array configuration.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-8-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

A new syntax is added to the parser so that the user can access
predefined perf events in BPF objects.

After this patch, BPF programs for perf are finally able to utilize
bpf_perf_event_read() introduced in commit 35578d79 ("bpf: Implement
function bpf_perf_event_read() that get the selected hardware PMU
counter").

Test result:

  # cat test_bpf_map_2.c
  /************************ BEGIN **************************/
  #include <uapi/linux/bpf.h>
  #define SEC(NAME) __attribute__((section(NAME), used))
  struct bpf_map_def {
      unsigned int type;
      unsigned int key_size;
      unsigned int value_size;
      unsigned int max_entries;
  };
  static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
      (void *)BPF_FUNC_trace_printk;
  static int (*get_smp_processor_id)(void) =
      (void *)BPF_FUNC_get_smp_processor_id;
  static int (*perf_event_read)(struct bpf_map_def *, int) =
      (void *)BPF_FUNC_perf_event_read;

  struct bpf_map_def SEC("maps") pmu_map = {
      .type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
      .key_size = sizeof(int),
      .value_size = sizeof(int),
      .max_entries = __NR_CPUS__,
  };
  SEC("func_write=sys_write")
  int func_write(void *ctx)
  {
      unsigned long long val;
      char fmt[] = "sys_write:        pmu=%llu\n";
      val = perf_event_read(&pmu_map, get_smp_processor_id());
      trace_printk(fmt, sizeof(fmt), val);
      return 0;
  }

  SEC("func_write_return=sys_write%return")
  int func_write_return(void *ctx)
  {
      unsigned long long val = 0;
      char fmt[] = "sys_write_return: pmu=%llu\n";
      val = perf_event_read(&pmu_map, get_smp_processor_id());
      trace_printk(fmt, sizeof(fmt), val);
      return 0;
  }
  char _license[] SEC("license") = "GPL";
  int _version SEC("version") = LINUX_VERSION_CODE;
  /************************* END ***************************/

Normal case:

  # echo "" > /sys/kernel/debug/tracing/trace
  # perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' ls /
  [SNIP]
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.013 MB perf.data (7 samples) ]
  # cat /sys/kernel/debug/tracing/trace | grep ls
                ls-17066 [000] d... 938449.863301: : sys_write:        pmu=1157327
                ls-17066 [000] dN.. 938449.863342: : sys_write_return: pmu=1225218
                ls-17066 [000] d... 938449.863349: : sys_write:        pmu=1241922
                ls-17066 [000] dN.. 938449.863369: : sys_write_return: pmu=1267445

Normal case (system wide):

  # echo "" > /sys/kernel/debug/tracing/trace
  # perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' -a
  ^C[ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.811 MB perf.data (120 samples) ]

  # cat /sys/kernel/debug/tracing/trace | grep -v '18446744073709551594' | grep -v perf | head -n 20
  [SNIP]
  #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
  #              | |       |   ||||       |         |
             gmain-30828 [002] d... 2740551.068992: : sys_write:        pmu=84373
             gmain-30828 [002] d... 2740551.068992: : sys_write_return: pmu=87696
             gmain-30828 [002] d... 2740551.068996: : sys_write:        pmu=100658
             gmain-30828 [002] d... 2740551.068997: : sys_write_return: pmu=102572

Error case 1:

  # perf record -e './test_bpf_map_2.c' ls /
  [SNIP]
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.014 MB perf.data ]
  # cat /sys/kernel/debug/tracing/trace | grep ls
                ls-17115 [007] d... 2724279.665625: : sys_write:        pmu=18446744073709551614
                ls-17115 [007] dN.. 2724279.665651: : sys_write_return: pmu=18446744073709551614
                ls-17115 [007] d... 2724279.665658: : sys_write:        pmu=18446744073709551614
                ls-17115 [007] dN.. 2724279.665677: : sys_write_return: pmu=18446744073709551614

  (18446744073709551614 is 0xfffffffffffffffe (-2))

Error case 2:

  # perf record -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=evt/' -a
  event syntax error: '..ps:pmu_map.event=evt/'
                                    \___ Event not found for map setting

  Hint:	Valid config terms:
       	map:[<arraymap>].value=[value]
       	map:[<eventmap>].event=[event]
  [SNIP]

Error case 3:
  # ls /proc/2348/task/
  2348  2505  2506  2507  2508
  # perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' -p 2348
  ERROR: Apply config to BPF failed: Cannot set event to BPF map in multi-thread tracing

Error case 4:
  # perf record -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' ls /
  ERROR: Apply config to BPF failed: Doesn't support inherit event (Hint: use -i to turn off inherit)

Error case 5:
  # perf record -i -e raw_syscalls:sys_enter -e './test_bpf_map_2.c/map:pmu_map.event=raw_syscalls:sys_enter/' ls
  ERROR: Apply config to BPF failed: Can only put raw, hardware and BPF output event into a BPF map

Error case 6:
  # perf record -i -e './test_bpf_map_2.c/map:pmu_map.event=123/' ls /
  event syntax error: '.._map.event=123/'
                                    \___ Incorrect value type for map
  [SNIP]
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-7-git-send-email-wangnan0@huawei.comSigned-off-by: NHe Kuang <hekuang@huawei.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.

After this patch, following syntax is available:

  # perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...

It would takes effect after appling following commits.

Test result:

  # cat ./test_bpf_map_1.c
  /************************ BEGIN **************************/
  #include <uapi/linux/bpf.h>
  #define SEC(NAME) __attribute__((section(NAME), used))
  struct bpf_map_def {
      unsigned int type;
      unsigned int key_size;
      unsigned int value_size;
      unsigned int max_entries;
  };
  static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
      (void *)BPF_FUNC_map_lookup_elem;
  static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
      (void *)BPF_FUNC_trace_printk;
  struct bpf_map_def SEC("maps") channel = {
      .type = BPF_MAP_TYPE_ARRAY,
      .key_size = sizeof(int),
      .value_size = sizeof(int),
      .max_entries = 1,
  };
  SEC("func=sys_nanosleep")
  int func(void *ctx)
  {
      int key = 0;
      char fmt[] = "%d\n";
      int *pval = map_lookup_elem(&channel, &key);
      if (!pval)
          return 0;
      trace_printk(fmt, sizeof(fmt), *pval);
      return 0;
  }
  char _license[] SEC("license") = "GPL";
  int _version SEC("version") = LINUX_VERSION_CODE;
  /************************* END ***************************/

 - Normal case:
  # ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.012 MB perf.data ]

 - Error case:

  # ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
  event syntax error: '..ps:channel:value/'
                                   \___ Config value not set (missing '=')
  Hint:	Valid config term:
         map:[<arraymap>]:value=[value]
         (add -v to see detail)
  Run 'perf list' for a list of valid events

  Usage: perf record [<options>] [<command>]
     or: perf record [<options>] -- <command> [<options>]

     -e, --event <event>   event selector. use 'perf list' to list available events

  # ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
  event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
                                    \___ Invalid object config option
  [SNIP]

  # ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
  event syntax error: '..p_1.c/map:xchannel.value=10/'
                                    \___ Target map not exist
  [SNIP]

  # ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
  event syntax error: '..ps:channel.xvalue=10/'
                                    \___ Invalid object map config option
  [SNIP]

  # ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
  event syntax error: '..nnel.value=x10/'
                                    \___ Incorrect value type for map
  [SNIP]

  Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:

  # ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
  event syntax error: '..ps:channel.value=10/'
                                    \___ Can't use this config term to this type of map

  Hint:	Valid config term:
      	map:[<arraymap>].value=[value]
      	(add -v to see detail)
Signed-off-by: NWang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.comSigned-off-by: NHe Kuang <hekuang@huawei.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Older compilers don't like this, for instance, on RHEL6.7:

    CC       /tmp/build/perf/util/parse-events.o
  util/parse-events.c:844: error: redefinition of typedef ‘config_term_func_t’
  util/parse-events.c:353: note: previous declaration of ‘config_term_func_t’ was here

So remove the second definition, that should've been just moved in 43d0b978
("perf tools: Enable config and setting names for legacy cache events"), not copied.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 43d0b978 ("perf tools: Enable config and setting names for legacy cache events")
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In RHEL 6.7:

  CC       /tmp/build/perf/util/parse-events.o
  cc1: warnings being treated as errors
  util/parse-events.c: In function ‘parse_events_add_cache’:
  util/parse-events.c:366: error: declaration of ‘error’ shadows a global declaration
  util/util.h:136: error: shadowed declaration is here

Rename it to 'err'.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 43d0b978 ("perf tools: Enable config and setting names for legacy cache events")
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch allows setting config terms for legacy cache events.
For example:

  # perf stat -e L1-icache-misses/name=valA/ -e branches/name=valB/ ls
  ...
   Performance counter stats for 'ls':

              11299      valA
             451605      valB

        0.000779091 seconds time elapsed

  # perf record -e cache-misses/name=inh/ -e cache-misses/name=noinh,no-inherit/ bash
  # ls
  # exit
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.023 MB perf.data (131 samples) ]
  # perf report --stdio | grep -B 1 'Event count'
  # Samples: 105  of event 'inh'
  # Event count (approx.): 109118
  --
  # Samples: 26  of event 'noinh'
  # Event count (approx.): 48302

A test case is introduced to test this feature.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-14-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch allows setting config terms for raw and numeric events.
For example:

  # perf stat -e cycles/name=cyc/ ls
  ...
  1821108      cyc
  ...

  # perf stat -e r6530160/name=event/ ls
  ...
  1103195      event
  ...

  # perf record -e cycles -e 4:0x6530160/name=evtx,call-graph=fp/ -a sleep 1
  ...
  # perf report --stdio
  ...
  # Samples: 124  of event 'cycles'
  46.61%     0.00%  swapper        [kernel.vmlinux]            [k] cpu_startup_entry
  41.26%     0.00%  swapper        [kernel.vmlinux]            [k] start_secondary
  ...
  # Samples: 91  of event 'evtx'
  ...
  93.76%     0.00%  swapper      [kernel.vmlinux]            [k] cpu_startup_entry
          |
          ---cpu_startup_entry
             |
             |--66.63%--call_cpuidle
             |          cpuidle_enter
             |          |
  ...

3 test cases are introduced to test config terms for symbol, raw and
numeric events.

Committer note:

Further testing shows that we can retrieve the event name using 'perf
evlist -v' and looking at the 'config' perf_event_attr field, i.e.:

  # perf record -e cycles -e 4:0x6530160/name=evtx,call-graph=fp/ -a sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.724 MB perf.data (2076 samples) ]
  # perf evlist
  cycles
  evtx
  # perf evlist -v
  cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
evtx: type: 4, size: 112, config: 0x6530160, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
  #
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-13-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Following commits will make more events obey /name=newname/ options.
This patch makes pmu_event_name() a generic helper.

Makes new get_config_name() accept NULL input to make life easier.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-12-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

'perf stat' accepts some config terms but doesn't apply them. For
example:

  # perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash
  # ls
  # exit

  Performance counter stats for 'bash':

         266258061      instructions/no-inherit/
         266258061      instructions/inherit/

       1.402183915 seconds time elapsed

The result is confusing, because user may expect the first
'instructions' event exclude the 'ls' command.

This patch forbid most of these config terms for 'perf stat'.

Result:

  # ./perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash
  event syntax error: 'instructions/no-inherit/'
                       \___ 'no-inherit' is not usable in 'perf stat'
  ...

We can add blocked config terms back when 'perf stat' really supports them.

This patch also removes unavailable config term from error message:

  # ./perf stat -e 'instructions/badterm/' ls
  event syntax error: 'instructions/badterm/'
                                    \___ unknown term

  valid terms: config,config1,config2,name

  # ./perf stat -e 'cpu/badterm/' ls
  event syntax error: 'cpu/badterm/'
                           \___ unknown term

  valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-11-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

config_term_names[] is introduced for future commits which will be able
to retrieve the config name through the config term.

Utilize this array in parse_events_formats_error_string() so the missing
'{,no-}inherit' terms are added.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-10-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

According to man pages, asprintf returns -1 when failure. This patch
fixes two incorrect return value checker.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Cc: stable@vger.kernel.org # v4.4+
Fixes: ffeb883e ("perf tools: Show proper error message for wrong terms of hw/sw events")
Link: http://lkml.kernel.org/r/1455882283-79592-5-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To follow convention used in other tools/perf/ areas. Also remove the
need to check if it is NULL before calling the destructor, again, to
follow convention that goes back to free().

Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-w6owu7rb8a46gvunlinxaqwx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fixing a leak, since code calling parse_events__free_terms() expect it
to free the list_head too.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
[ Spun off from another patch ]
Link: http://lkml.kernel.org/r/1454680939-24963-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Purges 'struct parse_event_term' entries from a list_head.

Some users need this because they don't allocate space for the list
head, it maybe on the stack or embedded into some other struct.

Next patch will convert users that need just purging and then the
perf_events__free_terms() routine will free the list head as well,
finally being renamed to perf_events_terms__delete().
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-4w3zl4ifcl0ed0j4bu3tckqp@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We were just freeing them, better unlink and init its nodes to catch
bugs faster if we keep dangling references to them.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
[ Spun off from another patch, use list_del_init() instead of list_del() ]
Link: http://lkml.kernel.org/r/1454680939-24963-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fixes segmentation fault using, for instance:

  (gdb) run record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
  Starting program: /home/acme/bin/perf record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
  Missing separate debuginfos, use: dnf debuginfo-install glibc-2.22-7.fc23.x86_64
  [Thread debugging using libthread_db enabled]
  Using host libthread_db library "/lib64/libthread_db.so.1".

 Program received signal SIGSEGV, Segmentation fault.
  0 x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410
  (gdb) bt
  #0  0x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410
  #1  0x00000000004b9fc5 in add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
      at util/parse-events.c:433
  #2  0x00000000004ba334 in add_tracepoint_event (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
      at util/parse-events.c:498
  #3  0x00000000004bb699 in parse_events_add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys=0x19b1370 "sched", event=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
      at util/parse-events.c:936
  #4  0x00000000004f6eda in parse_events_parse (_data=0x7fffffffb8b0, scanner=0x19a49d0) at util/parse-events.y:391
  #5  0x00000000004bc8e5 in parse_events__scanner (str=0x663ff2 "sched:sched_switch", data=0x7fffffffb8b0, start_token=258) at util/parse-events.c:1361
  #6  0x00000000004bca57 in parse_events (evlist=0x19a5220, str=0x663ff2 "sched:sched_switch", err=0x0) at util/parse-events.c:1401
  #7  0x0000000000518d5f in perf_evlist__can_select_event (evlist=0x19a3b90, str=0x663ff2 "sched:sched_switch") at util/record.c:253
  #8  0x0000000000553c42 in intel_pt_track_switches (evlist=0x19a3b90) at arch/x86/util/intel-pt.c:364
  #9  0x00000000005549d1 in intel_pt_recording_options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at arch/x86/util/intel-pt.c:664
  #10 0x000000000051e076 in auxtrace_record__options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at util/auxtrace.c:539
  #11 0x0000000000433368 in cmd_record (argc=1, argv=0x7fffffffde60, prefix=0x0) at builtin-record.c:1264
  #12 0x000000000049bec2 in run_builtin (p=0x8fa2a8 <commands+168>, argc=5, argv=0x7fffffffde60) at perf.c:390
  #13 0x000000000049c12a in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:451
  #14 0x000000000049c278 in run_argv (argcp=0x7fffffffdcbc, argv=0x7fffffffdcb0) at perf.c:495
  #15 0x000000000049c60a in main (argc=5, argv=0x7fffffffde60) at perf.c:618
(gdb)

Intel PT attempts to find the sched:sched_switch tracepoint but that seg
faults if tracefs is not readable, because the error reporting structure
is null, as errors are not reported when automatically adding
tracepoints.  Fix by checking before using.

Committer note:

This doesn't take place in a kernel that supports
perf_event_attr.context_switch, that is the default way that will be
used for tracking context switches, only in older kernels, like 4.2, in
a machine with Intel PT (e.g. Broadwell) for non-priviledged users.

Further info from a similar patch by Wang:

The error is in tracepoint_error: it assumes the 'e' parameter is valid.

However, there are many situation a parse_event() can be called without
parse_events_error. See result of

  $ grep 'parse_events(.*NULL)' ./tools/perf/ -r'
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Tong Zhang <ztong@vt.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 19658171 ("perf tools: Enhance parsing events tracepoint error output")
Link: http://lkml.kernel.org/r/1453809921-24596-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Move the subcommand-related files from perf to a new library named
libsubcmd.a.

Since we're moving files anyway, go ahead and rename 'exec_cmd.*' to
'exec-cmd.*' to be consistent with the naming of all the other files.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c0a838d4c878ab17fee50998811612b2281355c1.1450193761.git.jpoimboe@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When a43eec30 ("bpf: introduce bpf_perf_event_output() helper") added
PERF_COUNT_SW_BPF_OUTPUT we ended up with a new entry in the event_symbols_sw
array that wasn't initialized, thus set to NULL, fix print_symbol_events()
to check for that case so that we don't crash if this happens again.

  (gdb) bt
  #0  __match_glob (ignore_space=false, pat=<optimized out>, str=<optimized out>) at util/string.c:198
  #1  strglobmatch (str=<optimized out>, pat=pat@entry=0x7fffffffe61d "stall") at util/string.c:252
  #2  0x00000000004993a5 in print_symbol_events (type=1, syms=0x872880 <event_symbols_sw+160>, max=11, name_only=false, event_glob=0x7fffffffe61d "stall")
      at util/parse-events.c:1615
  #3  print_events (event_glob=event_glob@entry=0x7fffffffe61d "stall", name_only=false) at util/parse-events.c:1675
  #4  0x000000000042c79e in cmd_list (argc=1, argv=0x7fffffffe390, prefix=<optimized out>) at builtin-list.c:68
  #5  0x00000000004788a5 in run_builtin (p=p@entry=0x871758 <commands+120>, argc=argc@entry=2, argv=argv@entry=0x7fffffffe390) at perf.c:370
  #6  0x0000000000420ab0 in handle_internal_command (argv=0x7fffffffe390, argc=2) at perf.c:429
  #7  run_argv (argv=0x7fffffffe110, argcp=0x7fffffffe11c) at perf.c:473
  #8  main (argc=2, argv=0x7fffffffe390) at perf.c:588
  (gdb) p event_symbols_sw[PERF_COUNT_SW_BPF_OUTPUT]
  $4 = {symbol = 0x0, alias = 0x0}
  (gdb)

A patch to robustify perf to not segfault when the next counter gets added in
the kernel will follow this one.
Reported-by: NIngo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-57wysblcjfrseb0zg5u7ek10@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When PERF_COUNT_SW_BPF_OUTPUT was added to the kernel we should've
added it to tools/perf, where it is used just to list events.

This ended up causing a segfault in commands like "perf list stall".

Fix it by adding that new software counter.

A patch to robustify perf to not segfault when the next counter gets
added in the kernel will follow this one.
Reported-by: NIngo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uya354upi3eprsey6mi5962d@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When a43eec30 ("bpf: introduce bpf_perf_event_output() helper") added
PERF_COUNT_SW_BPF_OUTPUT we ended up with a new entry in the event_symbols_sw
array that wasn't initialized, thus set to NULL, fix print_symbol_events()
to check for that case so that we don't crash if this happens again.

  (gdb) bt
  #0  __match_glob (ignore_space=false, pat=<optimized out>, str=<optimized out>) at util/string.c:198
  #1  strglobmatch (str=<optimized out>, pat=pat@entry=0x7fffffffe61d "stall") at util/string.c:252
  #2  0x00000000004993a5 in print_symbol_events (type=1, syms=0x872880 <event_symbols_sw+160>, max=11, name_only=false, event_glob=0x7fffffffe61d "stall")
      at util/parse-events.c:1615
  #3  print_events (event_glob=event_glob@entry=0x7fffffffe61d "stall", name_only=false) at util/parse-events.c:1675
  #4  0x000000000042c79e in cmd_list (argc=1, argv=0x7fffffffe390, prefix=<optimized out>) at builtin-list.c:68
  #5  0x00000000004788a5 in run_builtin (p=p@entry=0x871758 <commands+120>, argc=argc@entry=2, argv=argv@entry=0x7fffffffe390) at perf.c:370
  #6  0x0000000000420ab0 in handle_internal_command (argv=0x7fffffffe390, argc=2) at perf.c:429
  #7  run_argv (argv=0x7fffffffe110, argcp=0x7fffffffe11c) at perf.c:473
  #8  main (argc=2, argv=0x7fffffffe390) at perf.c:588
  (gdb) p event_symbols_sw[PERF_COUNT_SW_BPF_OUTPUT]
  $4 = {symbol = 0x0, alias = 0x0}
  (gdb)

A patch to robustify perf to not segfault when the next counter gets added in
the kernel will follow this one.
Reported-by: NIngo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-57wysblcjfrseb0zg5u7ek10@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When PERF_COUNT_SW_BPF_OUTPUT was added to the kernel we should've
added it to tools/perf, where it is used just to list events.

This ended up causing a segfault in commands like "perf list stall".

Fix it by adding that new software counter.

A patch to robustify perf to not segfault when the next counter gets
added in the kernel will follow this one.
Reported-by: NIngo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uya354upi3eprsey6mi5962d@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

A series of bpf loader related error codes were introduced to help error
reporting. Functions were improved to return these new error codes.

Functions which return pointers were adjusted to encode error codes into
return value using the ERR_PTR() interface.

bpf_loader_strerror() was improved to convert these error messages to
strings. It checks the error codes and calls libbpf_strerror() and
strerror_r() accordingly, so caller don't need to consider checking the
range of the error code.

In bpf__strerror_load(), print kernel version of running kernel and the
object's 'version' section to notify user how to fix his/her program.

v1 -> v2:
 Use macro for error code.

 Fetch error message based on array index, eliminate for-loop.

 Print version strings.

Before:

  # perf record -e ./test_kversion_nomatch_program.o sleep 1
  event syntax error: './test_kversion_nomatch_program.o'
                       \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
  SKIP

  After:

  # perf record -e ./test_kversion_nomatch_program.o ls
  event syntax error: './test_kversion_nomatch_program.o'
                       \___ 'version' (4.4.0) doesn't match running kernel (4.3.0)
  SKIP
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446818289-87444-1-git-send-email-wangnan0@huawei.com
[ Add 'static inline' to bpf__strerror_prepare_load() when LIBBPF is disabled ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In this patch, a series of libbpf specific error numbers and
libbpf_strerror() are introduced to help reporting errors.

Functions are updated to pass correct the error number through the
CHECK_ERR() macro.

All users of bpf_object__open{_buffer}() and bpf_program__title() in
perf are modified accordingly. In addition, due to the error codes
changing, bpf__strerror_load() is also modified to use them.

bpf__strerror_head() is also changed accordingly so it can parse libbpf
errors. bpf_loader_strerror() is introduced for that purpose, and will
be improved by the following patch.

load_program() is improved not to dump log buffer if it is empty. log
buffer is also used to deduce whether the error was caused by an invalid
program or other problem.

v1 -> v2:

 - Using macro for error code.

 - Fetch error message based on array index, eliminate for-loop.

 - Use log buffer to detect the reason of failure. 3 new error code
   are introduced to replace LIBBPF_ERRNO__LOAD.

In v1:

  # perf record -e ./test_ill_program.o ls
  event syntax error: './test_ill_program.o'
                       \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
  SKIP

  # perf record -e ./test_kversion_nomatch_program.o ls
  event syntax error: './test_kversion_nomatch_program.o'
                       \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
  SKIP

  # perf record -e ./test_big_program.o ls
  event syntax error: './test_big_program.o'
                       \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
  SKIP

  In v2:

  # perf record -e ./test_ill_program.o ls
  event syntax error: './test_ill_program.o'
                       \___ Kernel verifier blocks program loading
  SKIP

  # perf record -e ./test_kversion_nomatch_program.o
  event syntax error: './test_kversion_nomatch_program.o'
                       \___ Incorrect kernel version
  SKIP
  (Will be further improved by following patches)

  # perf record -e ./test_big_program.o
  event syntax error: './test_big_program.o'
                       \___ Program too big
  SKIP
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446817783-86722-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch provides infrastructure for passing source files to --event
directly using:

 # perf record --event bpf-file.c command

This patch does following works:

 1) Allow passing '.c' file to '--event'. parse_events_load_bpf() is
    expanded to allow caller tell it whether the passed file is source
    file or object.

 2) llvm__compile_bpf() is called to compile the '.c' file, the result
    is saved into memory. Use bpf_object__open_buffer() to load the
    in-memory object.

Introduces a bpf-script-example.c so we can manually test it:

 # perf record --clang-opt "-DLINUX_VERSION_CODE=0x40200" --event ./bpf-script-example.c sleep 1

Note that '--clang-opt' must put before '--event'.

Futher patches will merge it into a testcase so can be tested automatically.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-10-git-send-email-wangnan0@huawei.comSigned-off-by: NHe Kuang <hekuang@huawei.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This is the final patch which makes basic BPF filter work. After
applying this patch, users are allowed to use BPF filter like:

 # perf record --event ./hello_world.o ls

A bpf_fd field is appended to 'struct evsel', and setup during the
callback function add_bpf_event() for each 'probe_trace_event'.

PERF_EVENT_IOC_SET_BPF ioctl is used to attach eBPF program to a newly
created perf event. The file descriptor of the eBPF program is passed to
perf record using previous patches, and stored into evsel->bpf_fd.

It is possible that different perf event are created for one kprobe
events for different CPUs. In this case, when trying to call the ioctl,
EEXIST will be return. This patch doesn't treat it as an error.

Committer note:

The bpf proggie used so far:

  __attribute__((section("fork=_do_fork"), used))
  int fork(void *ctx)
  {
	  return 0;
  }

  char _license[] __attribute__((section("license"), used)) = "GPL";
  int _version __attribute__((section("version"), used)) = 0x40300;

failed to produce any samples, even with forks happening and it being
running in system wide mode.

That is because now the filter is being associated, and the code above
always returns zero, meaning that all forks will be probed but filtered
away ;-/

Change it to 'return 1;' instead and after that:

  # trace --no-syscalls --event /tmp/foo.o
     0.000 perf_bpf_probe:fork:(ffffffff8109be30))
     2.333 perf_bpf_probe:fork:(ffffffff8109be30))
     3.725 perf_bpf_probe:fork:(ffffffff8109be30))
     4.550 perf_bpf_probe:fork:(ffffffff8109be30))
  ^C#

And it works with all tools, including 'perf trace'.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-8-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:

 # perf record --event filter.o ls

Can trace on each of the probes defined in filter.o.

The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().

Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.

Committer notes:

Before:

  # /tmp/oldperf record --event /tmp/foo.o -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.198 MB perf.data ]
  # perf evlist
  /tmp/foo.o
  # perf evlist -v
  /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
  sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
  inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
  exclude_guest: 1, mmap2: 1, comm_exec: 1

I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:

  # perf record --event /tmp/foo.o -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.210 MB perf.data ]
  # perf evlist -v
  perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
  sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
  inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
  1, mmap2: 1, comm_exec: 1
  #

We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.

To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:

  # perf record --event /tmp/foo.o -a

So, with that in place, we can use 'perf probe' to see what is in place:

  # perf probe -l
    perf_bpf_probe:fork  (on _do_fork@acme/git/linux/kernel/fork.c)

We also can use debugfs:

  [root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
  p:perf_bpf_probe/fork _text+638512

Ok, now lets stop and see if we got some forks:

  [root@felicio linux]# perf record --event /tmp/foo.o -a
  ^C[ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]

  [root@felicio linux]# perf script
      sshd  1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
      sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
      sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
      sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
  <SNIP>

Sure enough, we have 111 forks :-)

Callchains seems to work as well:

  # perf report --stdio --no-child
  # To display the perf.data header info, please use --header/--header-only options.
  #
  # Total Lost Samples: 0
  #
  # Samples: 562  of event 'perf_bpf_probe:fork'
  # Event count (approx.): 562
  #
  # Overhead  Command   Shared Object     Symbol
  # ........  ........  ................  ............
  #
      44.66%  sh        [kernel.vmlinux]  [k] _do_fork
                    |
                    ---_do_fork
                       entry_SYSCALL_64_fastpath
                       __libc_fork
                       make_child

    26.16%  make      [kernel.vmlinux]  [k] _do_fork
<SNIP>
  #
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch utilizes bpf_object__load() provided by libbpf to load all
objects into kernel.

Committer notes:

Testing it:

When using an incorrect kernel version number, i.e., having this in your
eBPF proggie:

  int _version __attribute__((section("version"), used)) = 0x40100;

For a 4.3.0-rc6+ kernel, say, this happens and needs checking at event
parsing time, to provide a better error report to the user:

  # perf record --event /tmp/foo.o sleep 1
  libbpf: load bpf program failed: Invalid argument
  libbpf: -- BEGIN DUMP LOG ---
  libbpf:

  libbpf: -- END LOG --
  libbpf: failed to load program 'fork=_do_fork'
  libbpf: failed to load object '/tmp/foo.o'
  event syntax error: '/tmp/foo.o'
                       \___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel?

  (add -v to see detail)
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events

If we instead make it match, i.e. use 0x40300 on this v4.3.0-rc6+
kernel, the whole process goes thru:

  # perf record --event /tmp/foo.o -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.202 MB perf.data ]
  # perf evlist -v
  /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
  sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
  inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
  exclude_guest: 1, mmap2: 1, comm_exec: 1
  #
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-6-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch introduces bpf__{un,}probe() functions to enable callers to
create kprobe points based on section names a BPF program. It parses the
section names in the program and creates corresponding 'struct
perf_probe_event' structures. The parse_perf_probe_command() function is
used to do the main parsing work. The resuling 'struct perf_probe_event'
is stored into program private data for further using.

By utilizing the new probing API, this patch creates probe points during
event parsing.

To ensure probe points be removed correctly, register an atexit hook so
even perf quit through exit() bpf__clear() is still called, so probing
points are cleared. Note that bpf_clear() should be registered before
bpf__probe() is called, so failure of bpf__probe() can still trigger
bpf__clear() to remove probe points which are already probed.

strerror style error reporting scaffold is created by this patch.
bpf__strerror_probe() is the first error reporting function in
bpf-loader.c.

Committer note:

Trying it:

To build a test eBPF object file:

I am testing using a script I built from the 'perf test -v LLVM' output:

  $ cat ~/bin/hello-ebpf
  export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h"
  export WORKING_DIR=/lib/modules/4.2.0/build
  export CLANG_SOURCE=-
  export CLANG_OPTIONS=-xc

  OBJ=/tmp/foo.o
  rm -f $OBJ
  echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \
  clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ

 ---

First asking to put a probe in a function not present in the kernel
(misses the initial _):

  $ perf record --event /tmp/foo.o sleep 1
  Probe point 'do_fork' not found.
  event syntax error: '/tmp/foo.o'
                       \___ You need to check probing points in BPF file

  (add -v to see detail)
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events
  $

 ---

Now, with "__attribute__((section("fork=_do_fork"), used)):

 $ grep _do_fork /proc/kallsyms
 ffffffff81099ab0 T _do_fork
 $ perf record --event /tmp/foo.o sleep 1
 Failed to open kprobe_events: Permission denied
 event syntax error: '/tmp/foo.o'
                      \___ Permission denied

 ---

Cool, we need to provide some better hints, "kprobe_events" is too low
level, one doesn't strictly need to know the precise details of how
these things are put in place, so something that shows the command
needed to fix the permissions would be more helpful.

Lets try as root instead:

  # perf record --event /tmp/foo.o sleep 1
  Lowering default frequency rate to 1000.
  Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.013 MB perf.data ]
  # perf evlist
  /tmp/foo.o
  [root@felicio ~]# perf evlist -v
  /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
  sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1,
  inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1,
  sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1

 ---
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.

After applying this patch, commands like:

 # perf record --event foo.o sleep

become possible.

However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented.  Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.

Commiter notes:

Using it:

  $ ls -la foo.o
  ls: cannot access foo.o: No such file or directory
  $ perf record --event foo.o sleep
  libbpf: failed to open foo.o: No such file or directory
  event syntax error: 'foo.o'
                       \___ BPF object file 'foo.o' is invalid

  (add -v to see detail)
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events
  $

  $ file /tmp/build/perf/perf.o
  /tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
  $ perf record --event /tmp/build/perf/perf.o sleep
  libbpf: /tmp/build/perf/perf.o is not an eBPF object file
  event syntax error: '/tmp/build/perf/perf.o'
                       \___ BPF object file '/tmp/build/perf/perf.o' is invalid

  (add -v to see detail)
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events
  $

  $ file /tmp/foo.o
  /tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
  $ perf record --event /tmp/foo.o sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.013 MB perf.data ]
  $ perf evlist
  /tmp/foo.o
  $ perf evlist  -v
  /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  $

So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.

  $ perf report --stdio
  Error:
  The perf.data file has no samples!
  # To display the perf.data header info, please use --header/--header-only options.
  #
  $
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch allows perf record setting event's attr.inherit bit by
config terms like:

  # perf record -e cycles/no-inherit/ ...
  # perf record -e cycles/inherit/ ...

So user can control inherit bit for each event separately.

In following example, a.out fork()s in main then do some complex
CPU intensive computations in both of its children.

Basic result with and without inherit:

  # perf record -e cycles -e instructions ./a.out
  [ perf record: Woken up 9 times to write data ]
  [ perf record: Captured and wrote 2.205 MB perf.data (47920 samples) ]
  # perf report --stdio
  # ...
  # Samples: 23K of event 'cycles'
  # Event count (approx.): 23641752891
  ...
  # Samples: 24K of event 'instructions'
  # Event count (approx.): 30428312415

  # perf record -i -e cycles -e instructions ./a.out
  [ perf record: Woken up 5 times to write data ]
  [ perf record: Captured and wrote 1.111 MB perf.data (24019 samples) ]
  ...
  # Samples: 12K of event 'cycles'
  # Event count (approx.): 11699501775
  ...
  # Samples: 12K of event 'instructions'
  # Event count (approx.): 15058023559

Cancel inherit for one event when globally enable:

  # perf record -e cycles/no-inherit/ -e instructions ./a.out
  [ perf record: Woken up 7 times to write data ]
  [ perf record: Captured and wrote 1.660 MB perf.data (36004 samples) ]
  ...
  # Samples: 12K of event 'cycles/no-inherit/'
  # Event count (approx.): 11895759282
 ...
  # Samples: 24K of event 'instructions'
  # Event count (approx.): 30668000441

Enable inherit for one event when globally disable:

  # perf record -i -e cycles/inherit/ -e instructions ./a.out
  [ perf record: Woken up 7 times to write data ]
  [ perf record: Captured and wrote 1.654 MB perf.data (35868 samples) ]
  ...
  # Samples: 23K of event 'cycles/inherit/'
  # Event count (approx.): 23285400229
  ...
  # Samples: 11K of event 'instructions'
  # Event count (approx.): 14969050259

Committer note:

One can check if the bit was set, in addition to seeing the result in
the perf.data file size as above by doing one of:

  # perf record -e cycles -e instructions -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.911 MB perf.data (63 samples) ]
  # perf evlist -v
  cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
  #

So, the inherit bit was set in both, now, if we disable it globally using
--no-inherit:

  # perf record --no-inherit -e cycles -e instructions -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.910 MB perf.data (56 samples) ]
  # perf evlist -v
  cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1

No inherit bit set, then disabling it and setting just on the cycles event:

  # perf record --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.909 MB perf.data (48 samples) ]
  # perf evlist -v
  cycles/inherit/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
  #

We can see it as well in by using a more verbose level of debug messages in
the tool that sets up the perf_event_attr, 'perf record' in this case:

  [root@zoo ~]# perf record -vv --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    { sample_period, sample_freq }   4000
    sample_type                      IP|TID|TIME|ID|CPU|PERIOD
    read_format                      ID
    disabled                         1
    inherit                          1
    mmap                             1
    comm                             1
    freq                             1
    task                             1
    sample_id_all                    1
    exclude_guest                    1
    mmap2                            1
    comm_exec                        1
  ------------------------------------------------------------
  sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8
  sys_perf_event_open: pid -1  cpu 1  group_fd -1  flags 0x8
  sys_perf_event_open: pid -1  cpu 2  group_fd -1  flags 0x8
  sys_perf_event_open: pid -1  cpu 3  group_fd -1  flags 0x8
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    config                           0x1
    { sample_period, sample_freq }   4000
    sample_type                      IP|TID|TIME|ID|CPU|PERIOD
    read_format                      ID
    disabled                         1
    freq                             1
    sample_id_all                    1
    exclude_guest                    1
  ------------------------------------------------------------
  sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8

<SNIP>
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446029705-199659-2-git-send-email-wangnan0@huawei.com
[ s/u64/bool/ for the perf_evsel_config_term inherit field - jolsa]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently we dont fail properly when pattern matching fails to find any
tracepoint.

Current behaviour:

  $ perf record -e 'sched:krava*' sleep 1
  WARNING: event parser found nothinginvalid or unsupported event: 'sched:krava*'
  Run 'perf list' for a list of valid events

  usage: perf record [<options>] [<command>]
     or: perf record [<options>] -- <command> [<options>]

This patch change:

  $ perf record -e 'sched:krava*' sleep 1
  event syntax error: 'sched:krava*'
                       \___ unknown tracepoint

  Error:  File /sys/kernel/debug/tracing/events/sched/krava* not found.
  Hint:   Perhaps this kernel misses some CONFIG_ setting to enable this feature?.

  Run 'perf list' for a list of valid events

   usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]
Reported-by: NDaniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444073477-3181-1-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The 'P' will cause the event to get maximum possible detected precise
level.

Following record:
  $ perf record -e cycles:P ...

will detect maximum precise level for 'cycles' event and use it.

Commiter note:

Testing it:

  $ perf record -e cycles:P usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.013 MB perf.data (9 samples) ]
  $ perf evlist
  cycles:P
  $ perf evlist -v
  cycles:P: size: 112, { sample_period, sample_freq }: 4000, sample_type:
  IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
  enable_on_exec: 1, task: 1, precise_ip: 2, sample_id_all: 1, mmap2: 1,
  comm_exec: 1
  $
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-6-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that one can, for instance, use it with wc -l:

  # perf list *:*write* | wc -l
  60

Or to look for the "bio" tracepoints, without 'perf list' headers:

  # perf list *:*bio* | head
    block:block_bio_backmerge                          [Tracepoint event]
    block:block_bio_bounce                             [Tracepoint event]
    block:block_bio_complete                           [Tracepoint event]
    block:block_bio_frontmerge                         [Tracepoint event]
    block:block_bio_queue                              [Tracepoint event]
    block:block_bio_remap                              [Tracepoint event]
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ts7sc0x8u4io4cifzkup4j44@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The error variable breaks build on CentOS 6.7, due to a collision with a
global error symbol:

    CC       util/parse-events.o
  cc1: warnings being treated as errors
  util/parse-events.c:419: error: declaration of ‘error’ shadows a global
  declaration
  util/util.h:135: error: shadowed declaration is here
  util/parse-events.c: In function ‘add_tracepoint_multi_event’:
  ...

Using different argument names instead to fix it.
Reported-by: NVinson Lee <vlee@twopensource.com>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-tip-commits@vger.kernel.org
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150929150531.GI27383@krava.redhat.com
[ Fix one more case, at line 770 ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch enables config terms for tracepoint perf events. Valid terms
for tracepoint events are 'call-graph' and 'stack-size', so we can use
different callgraph settings for each event and eliminate unnecessary
overhead.

Here is an example for using different call-graph config for each
tracepoint.

  $ perf record -e syscalls:sys_enter_write/call-graph=fp/
                -e syscalls:sys_exit_write/call-graph=no/
                dd if=/dev/zero of=test bs=4k count=10

  $ perf report --stdio

  #
  # Total Lost Samples: 0
  #
  # Samples: 13  of event 'syscalls:sys_enter_write'
  # Event count (approx.): 13
  #
  # Children      Self  Command  Shared Object       Symbol
  # ........  ........  .......  ..................  ......................
  #
      76.92%    76.92%  dd       libpthread-2.20.so  [.] __write_nocancel
                   |
                   ---__write_nocancel

      23.08%    23.08%  dd       libc-2.20.so        [.] write
                   |
                   ---write
                      |
                      |--33.33%-- 0x2031342820736574
                      |
                      |--33.33%-- 0xa6e69207364726f
                      |
                       --33.33%-- 0x34202c7320393039
  ...

  # Samples: 13  of event 'syscalls:sys_exit_write'
  # Event count (approx.): 13
  #
  # Children      Self  Command  Shared Object       Symbol
  # ........  ........  .......  ..................  ......................
  #
      76.92%    76.92%  dd       libpthread-2.20.so  [.] __write_nocancel
      23.08%    23.08%  dd       libc-2.20.so        [.] write
       7.69%     0.00%  dd       [unknown]           [.] 0x0a6e69207364726f
       7.69%     0.00%  dd       [unknown]           [.] 0x2031342820736574
       7.69%     0.00%  dd       [unknown]           [.] 0x34202c7320393039
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-4-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Show proper error message and show valid terms when wrong config terms
is specified for hw/sw type perf events.

This patch makes the original error format function formats_error_string()
more generic, which only outputs the static config terms for hw/sw perf
events, and prepends pmu formats for pmu events.

Before this patch:

  $ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
  invalid or unsupported event: 'cpu-clock/freqx=200/'
  Run 'perf list' for a list of valid events

   usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events

After this patch:

  $ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
  event syntax error: 'cpu-clock/freqx=200/'
                                 \___ unknown term

  valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size

  Run 'perf list' for a list of valid events

   usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently, function config_term() is used for checking config terms of
all types of events, while unknown terms is not reported as an error
because pmu events have valid terms in sysfs.

But this is wrong when unknown terms are specificed to hw/sw events.
This patch Adds the config_term callback so we can use separate check
routines for each type of events.
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-1-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Don't blindly retrieve and use a last element in the lists returned by
parse_events__scanner(), as it may have collected no entries, i.e.
return an empty list.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441523623-152703-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

perf_evlist__propagate_maps() cannot easily tell if an evsel has its own
cpu map.  To make that simpler, keep a copy of the PMU cpu map and
adjust the propagation logic accordingly.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-8-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit d49e4695 ("perf evsel: Add a backpointer to the evlist a
evsel is in") updated perf_evlist__add() but not
perf_evlist__splice_list_tail().

This illustrates that it is better if perf_evlist__splice_list_tail()
calls perf_evlist__add() instead of duplicating the logic, so do that.
This will also simplify a subsequent fix for propagating maps.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-6-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>