Crucial M550 may cause data corruption on queued trims and is
blacklisted.  The pattern used for it fails to match 1TB one as the
capacity section will be four chars instead of three.  Widen the
pattern.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NCharles Reiss <woggling@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81071
Cc: stable@vger.kernel.org

The function may be useful for other drivers, so export it.  (Suggested
by Tejun Heo.)

Note that I inverted the return value of glob_match; returning true on
match seemed to make more sense.
Signed-off-by: NGeorge Spelvin <linux@horizon.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

1871ee13 ("libata: support the ata host which implements a queue
depth less than 32") directly used ata_port->scsi_host->can_queue from
ata_qc_new() to determine the number of tags supported by the host;
unfortunately, SAS controllers doing SATA don't initialize ->scsi_host
leading to the following oops.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
 IP: [<ffffffff814e0618>] ata_qc_new_init+0x188/0x1b0
 PGD 0
 Oops: 0002 [#1] SMP
 Modules linked in: isci libsas scsi_transport_sas mgag200 drm_kms_helper ttm
 CPU: 1 PID: 518 Comm: udevd Not tainted 3.16.0-rc6+ #62
 Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013
 task: ffff880c1a00b280 ti: ffff88061a000000 task.ti: ffff88061a000000
 RIP: 0010:[<ffffffff814e0618>]  [<ffffffff814e0618>] ata_qc_new_init+0x188/0x1b0
 RSP: 0018:ffff88061a003ae8  EFLAGS: 00010012
 RAX: 0000000000000001 RBX: ffff88000241ca80 RCX: 00000000000000fa
 RDX: 0000000000000020 RSI: 0000000000000020 RDI: ffff8806194aa298
 RBP: ffff88061a003ae8 R08: ffff8806194a8000 R09: 0000000000000000
 R10: 0000000000000000 R11: ffff88000241ca80 R12: ffff88061ad58200
 R13: ffff8806194aa298 R14: ffffffff814e67a0 R15: ffff8806194a8000
 FS:  00007f3ad7fe3840(0000) GS:ffff880627620000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000058 CR3: 000000061a118000 CR4: 00000000001407e0
 Stack:
  ffff88061a003b20 ffffffff814e96e1 ffff88000241ca80 ffff88061ad58200
  ffff8800b6bf6000 ffff880c1c988000 ffff880619903850 ffff88061a003b68
  ffffffffa0056ce1 ffff88061a003b48 0000000013d6e6f8 ffff88000241ca80
 Call Trace:
  [<ffffffff814e96e1>] ata_sas_queuecmd+0xa1/0x430
  [<ffffffffa0056ce1>] sas_queuecommand+0x191/0x220 [libsas]
  [<ffffffff8149afee>] scsi_dispatch_cmd+0x10e/0x300
  [<ffffffff814a3bc5>] scsi_request_fn+0x2f5/0x550
  [<ffffffff81317613>] __blk_run_queue+0x33/0x40
  [<ffffffff8131781a>] queue_unplugged+0x2a/0x90
  [<ffffffff8131ceb4>] blk_flush_plug_list+0x1b4/0x210
  [<ffffffff8131d274>] blk_finish_plug+0x14/0x50
  [<ffffffff8117eaa8>] __do_page_cache_readahead+0x198/0x1f0
  [<ffffffff8117ee21>] force_page_cache_readahead+0x31/0x50
  [<ffffffff8117ee7e>] page_cache_sync_readahead+0x3e/0x50
  [<ffffffff81172ac6>] generic_file_read_iter+0x496/0x5a0
  [<ffffffff81219897>] blkdev_read_iter+0x37/0x40
  [<ffffffff811e307e>] new_sync_read+0x7e/0xb0
  [<ffffffff811e3734>] vfs_read+0x94/0x170
  [<ffffffff811e43c6>] SyS_read+0x46/0xb0
  [<ffffffff811e33d1>] ? SyS_lseek+0x91/0xb0
  [<ffffffff8171ee29>] system_call_fastpath+0x16/0x1b
 Code: 00 00 00 88 50 29 83 7f 08 01 19 d2 83 e2 f0 83 ea 50 88 50 34 c6 81 1d 02 00 00 40 c6 81 17 02 00 00 00 5d c3 66 0f 1f 44 00 00 <89> 14 25 58 00 00 00

Fix it by introducing ata_host->n_tags which is initialized to
ATA_MAX_QUEUE - 1 in ata_host_init() for SAS controllers and set to
scsi_host_template->can_queue in ata_host_register() for !SAS ones.
As SAS hosts are never registered, this will give them the same
ATA_MAX_QUEUE - 1 as before.  Note that we can't use
scsi_host->can_queue directly for SAS hosts anyway as they can go
higher than the libata maximum.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NMike Qiu <qiudayu@linux.vnet.ibm.com>
Reported-by: NJesse Brandeburg <jesse.brandeburg@gmail.com>
Reported-by: NPeter Hurley <peter@hurleysoftware.com>
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Tested-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Fixes: 1871ee13 ("libata: support the ata host which implements a queue depth less than 32")
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org

The sata on fsl mpc8315e is broken after the commit 8a4aeec8
("libata/ahci: accommodate tag ordered controllers"). The reason is
that the ata controller on this SoC only implement a queue depth of
16. When issuing the commands in tag order, all the commands in tag
16 ~ 31 are mapped to tag 0 unconditionally and then causes the sata
malfunction. It makes no senses to use a 32 queue in software while
the hardware has less queue depth. So consider the queue depth
implemented by the hardware when requesting a command tag.

Fixes: 8a4aeec8 ("libata/ahci: accommodate tag ordered controllers")
Cc: stable@vger.kernel.org
Signed-off-by: NKevin Hao <haokexin@gmail.com>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Queued trim only works for some users with MU05 firmware.  Revert to
blacklisting all firmware versions.

Introduced by commit d121f7d0 ("libata: Update queued trim blacklist
for M5x0 drives") which this effectively reverts, while retaining the
blacklisting of M550.

See

    https://bugzilla.kernel.org/show_bug.cgi?id=71371

for reports of trouble with MU05 firmware.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a ZPODD device is unbound via sysfs, the ACPI notify handler
is not removed. This causes panics as observed in Bug #74601. The
panic only happens when the wake happens from outside the kernel
(i.e. inserting a media or pressing a button). Add a loop to
ata_port_detach which loops through the port's devices and checks
if zpodd is enabled, if so call zpodd_exit.

Cc: stable@vger.kernel.org
Reviewed-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NLevente Kurusa <levex@linux.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

The AHCI spec allows implementations to issue commands in tag order
rather than FIFO order:

	5.3.2.12 P:SelectCmd
	HBA sets pSlotLoc = (pSlotLoc + 1) mod (CAP.NCS + 1)
	or HBA selects the command to issue that has had the
	PxCI bit set to '1' longer than any other command
	pending to be issued.

The result is that commands posted sequentially (time-wise) may play out
of sequence when issued by hardware.

This behavior has likely been hidden by drives that arrange for commands
to complete in issue order.  However, it appears recent drives (two from
different vendors that we have found so far) inflict out-of-order
completions as a matter of course.  So, we need to take care to maintain
ordered submission, otherwise we risk triggering a drive to fall out of
sequential-io automation and back to random-io processing, which incurs
large latency and degrades throughput.

This issue was found in simple benchmarks where QD=2 seq-write
performance was 30-50% *greater* than QD=32 seq-write performance.

Tagging for -stable and making the change globally since it has a low
risk-to-reward ratio.  Also, word is that recent versions of an unnamed
OS also does it this way now.  So, drives in the field are already
experienced with this tag ordering scheme.

Cc: <stable@vger.kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ed Ciechanowski <ed.ciechanowski@intel.com>
Reviewed-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Crucial/Micron M500 drives properly support queued DSM TRIM starting
with firmware MU05. Update the blacklist so we only disable queued trim
for older firmware releases.

Early M550 series drives suffer from the same issue as M500. A bugfix
firmware is in the pipeline but not ready yet. Until then, blacklist
queued trim for M550.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Cc: Chris Samuel <chris@csamuel.org>
Cc: Marc MERLIN <marc@merlins.org>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org

Improve overall system resume time by making libata link recovery
actions asynchronous relative to other resume events.

Link resume operations are performed using the scsi_eh thread, so
commands, particularly the sd resume start/stop command, will be held
off until the device exits error handling.  Libata already flushes eh
with ata_port_wait_eh() in the port teardown paths, so there are no
concerns with async operation colliding with the end-of-life of the
ata_port object.  Also, libata-core is already careful to flush
in-flight pm operations before another round of pm starts on the given
ata_port.

Reference: https://01.org/suspendresume/blogs/tebrandt/2013/hard-disk-resume-optimization-simpler-approach

Cc: Len Brown <len.brown@intel.com>
Cc: Phillip Susi <psusi@ubuntu.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: NTodd Brandt <todd.e.brandt@linux.intel.com>
[djbw: rebase on cleanup patch, changelog wordsmithing]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Tejun says:
  "At least for libata, worrying about suspend/resume failures don't make
   whole lot of sense.  If suspend failed, just proceed with suspend.  If
   the device can't be woken up afterwards, that's that.  There isn't
   anything we could have done differently anyway.  The same for resume, if
   spinup fails, the device is dud and the following commands will invoke
   EH actions and will eventually fail.  Again, there really isn't any
   *choice* to make.  Just making sure the errors are handled gracefully
   (ie. don't crash) and the following commands are handled correctly
   should be enough."

The only libata user that actually cares about the result from a suspend
operation is libsas.  However, it only cares about whether queuing a new
operation collides with an in-flight one.  All libsas does with the
error is retry, but we can just let libata wait for the previous
operation before continuing.

Other cleanups include:
1/ Unifying all ata port pm operations on an ata_port_pm_ prefix
2/ Marking all ata port pm helper routines as returning void, only
   ata_port_pm_ entry points need to fake a 0 return value.
3/ Killing ata_port_{suspend|resume}_common() in favor of calling
   ata_port_request_pm() directly
4/ Killing the wrappers that just do a to_ata_port() conversion
5/ Clearly marking the entry points that do async operations with an
  _async suffix.

Reference: http://marc.info/?l=linux-scsi&m=138995409532286&w=2

Cc: Phillip Susi <psusi@ubuntu.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NTodd Brandt <todd.e.brandt@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

We're now blacklisting "Crucial_CT???M500SSD1" and
"Crucial_CT???M500SSD3".  Also, "Micron_M500*" is blacklisted which is
about the same devices as the crucial branded ones.  Let's merge the
two Crucial M500 entries and widen the match to
"Crucial_CT???M500SSD*" so that we don't have to fiddle with new
entries for similar devices.
Signed-off-by: NTejun Heo <tj@kernel.org>
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org

Via commit 87809942 "libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk
for Seagate Momentus SpinPoint M8" we added a quirk for disks named
"ST1000LM024 HN-M101MBB" with firmware revision "2AR10001".

As reported on https://bugzilla.redhat.com/show_bug.cgi?id=1073901,
we need to also add firmware revision 2BA30001 as it is broken as well.
Reported-by: NNicholas <arealityfarbetween@googlemail.com>
Signed-off-by: NMichele Baldessari <michele@acksyn.org>
Tested-by: NGuilherme Amadio <guilherme.amadio@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org

Queued TRIM commands cause problems and silent file system corruption
on Crucial M500 SSDs. This patch disables them for the mSATA model of
the drive.
Signed-off-by: NMarios Andreopoulos <opensource@andmarios.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # 3.12+
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=71371

This patch fix spelling typo in Documentation/DocBook.
It is because .html and .xml files are generated by make htmldocs,
I have to fix a typo within the source files.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

For some reason, some early WD drives spin up and down drives
erratically when the link is put into slumber mode which can reduce
the life expectancy of the device significantly.  Unfortunately, we
don't have full list of devices and given the nature of the issue it'd
be better to err on the side of false positives than the other way
around.  Let's disable LPM on all WD devices which match one of the
known problematic model prefixes and are SATA-I.

As horkage list doesn't support matching SATA capabilities, this is
implemented as two horkages - WD_BROKEN_LPM and NOLPM.  The former is
set for the known prefixes and sets the latter if the matched device
is SATA-I.

Note that this isn't optimal as this disables all LPM operations and
partial link power state reportedly works fine on these; however, the
way LPM is implemented in libata makes it difficult to precisely map
libata LPM setting to specific link power state.  Well, these devices
are already fairly outdated.  Let's just disable whole LPM for now.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-and-tested-by: NNikos Barkas <levelwol@gmail.com>
Reported-and-tested-by: NIoannis Barkas <risc4all@yahoo.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=57211
Cc: stable@vger.kernel.org

Certain drives cannot handle queued TRIM commands properly, even
though support is indicated in the IDENTIFY DEVICE buffer.  This patch
allows for disabling the commands for the affected drives and apply it
to the Micron/Crucial M500 SSDs which exhibit incorrect protocol
behavior when issued queued TRIM commands, which could lead to silent
data corruption.

tj: Merged two unnecessarily split patches and made minor edits
    including shortening horkage name.
Signed-off-by: NMarc Carino <marc.ceeeee@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/g/1387246554-7311-1-git-send-email-marc.ceeeee@gmail.com
Cc: stable@vger.kernel.org # 3.12+

A user on StackExchange had a failing SSD that's soldered directly
onto the motherboard of his system. The BIOS does not give any option
to disable it at all, so he can't just hide it from the OS via the
BIOS.

The old IDE layer had hdX=noprobe override for situations like this,
but that was never ported to the libata layer.

This patch implements a disable flag for libata.force.

Example use:

 libata.force=2.0:disable

[v2 of the patch, removed the nodisable flag per Tejun Heo]
Signed-off-by: NRobin H. Johnson <robbat2@gentoo.org>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Link: http://unix.stackexchange.com/questions/102648/how-to-tell-linux-kernel-3-0-to-completely-ignore-a-failing-disk
Link: http://askubuntu.com/questions/352836/how-can-i-tell-linux-kernel-to-completely-ignore-a-disk-as-if-it-was-not-even-co
Link: http://superuser.com/questions/599333/how-to-disable-kernel-probing-for-drive

We've received multiple reports in Fedora via (BZ 907193)
that the Seagate Momentus SpinPoint M8 errors out when enabling AA:
[    2.555905] ata2.00: failed to enable AA (error_mask=0x1)
[    2.568482] ata2.00: failed to enable AA (error_mask=0x1)

Add the ATA_HORKAGE_BROKEN_FPDMA_AA for this specific harddisk.
Reported-by: NNicholas <arealityfarbetween@googlemail.com>
Signed-off-by: NMichele Baldessari <michele@acksyn.org>
Tested-by: NNicholas <arealityfarbetween@googlemail.com>
Acked-by: NAlan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org

After commit bcdde7e2 (sysfs: make __sysfs_remove_dir() recursive)
Mika Westerberg sees traces analogous to the one below in Thunderbolt
hot-remove testing:

 WARNING: CPU: 0 PID: 4 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
 sysfs group ffffffff81c6f1e0 not found for kobject 'host7'
 Modules linked in:
 CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.12.0+ #13
 Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
 Workqueue: kacpi_hotplug acpi_hotplug_work_fn
  0000000000000009 ffff8801002459b0 ffffffff817daab1 ffff8801002459f8
  ffff8801002459e8 ffffffff810436b8 0000000000000000 ffffffff81c6f1e0
  ffff88006d440358 ffff88006d440188 ffff88006e8b4c28 ffff880100245a48
 Call Trace:
  [<ffffffff817daab1>] dump_stack+0x45/0x56
  [<ffffffff810436b8>] warn_slowpath_common+0x78/0xa0
  [<ffffffff81043727>] warn_slowpath_fmt+0x47/0x50
  [<ffffffff811ad319>] ? sysfs_get_dirent_ns+0x49/0x70
  [<ffffffff811ae526>] sysfs_remove_group+0xc6/0xd0
  [<ffffffff81432f7e>] dpm_sysfs_remove+0x3e/0x50
  [<ffffffff8142a0d0>] device_del+0x40/0x1b0
  [<ffffffff8142a24d>] device_unregister+0xd/0x20
  [<ffffffff8144131a>] scsi_remove_host+0xba/0x110
  [<ffffffff8145f526>] ata_host_detach+0xc6/0x100
  [<ffffffff8145f578>] ata_pci_remove_one+0x18/0x20
  [<ffffffff812e8f48>] pci_device_remove+0x28/0x60
  [<ffffffff8142d854>] __device_release_driver+0x64/0xd0
  [<ffffffff8142d8de>] device_release_driver+0x1e/0x30
  [<ffffffff8142d257>] bus_remove_device+0xf7/0x140
  [<ffffffff8142a1b1>] device_del+0x121/0x1b0
  [<ffffffff812e43d4>] pci_stop_bus_device+0x94/0xa0
  [<ffffffff812e437b>] pci_stop_bus_device+0x3b/0xa0
  [<ffffffff812e437b>] pci_stop_bus_device+0x3b/0xa0
  [<ffffffff812e44dd>] pci_stop_and_remove_bus_device+0xd/0x20
  [<ffffffff812fc743>] trim_stale_devices+0x73/0xe0
  [<ffffffff812fc78b>] trim_stale_devices+0xbb/0xe0
  [<ffffffff812fc78b>] trim_stale_devices+0xbb/0xe0
  [<ffffffff812fcb6e>] acpiphp_check_bridge+0x7e/0xd0
  [<ffffffff812fd90d>] hotplug_event+0xcd/0x160
  [<ffffffff812fd9c5>] hotplug_event_work+0x25/0x60
  [<ffffffff81316749>] acpi_hotplug_work_fn+0x17/0x22
  [<ffffffff8105cf3a>] process_one_work+0x17a/0x430
  [<ffffffff8105db29>] worker_thread+0x119/0x390
  [<ffffffff8105da10>] ? manage_workers.isra.25+0x2a0/0x2a0
  [<ffffffff81063a5d>] kthread+0xcd/0xf0
  [<ffffffff81063990>] ? kthread_create_on_node+0x180/0x180
  [<ffffffff817eb33c>] ret_from_fork+0x7c/0xb0
  [<ffffffff81063990>] ? kthread_create_on_node+0x180/0x180

The source of this problem is that SCSI hosts are removed from
ATA ports after calling ata_tport_delete() which removes the
port's sysfs directory, among other things.  Now, after commit
bcdde7e2, the sysfs directory is removed along with all of
its subdirectories that include the SCSI host's sysfs directory
and its subdirectories at this point.  Consequently, when
device_del() is finally called for any child device of the SCSI
host and tries to remove its "power" group (which is already
gone then), it triggers the above warning.

To make the warnings go away, change the removal ordering in
ata_port_detach() so that the SCSI host is removed from the
port before ata_tport_delete() is called.

References: https://bugzilla.kernel.org/show_bug.cgi?id=65281Reported-and-tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

The "Slimtype DVD A  DS8A9SH" drive locks up with following backtrace when
the max sector is smaller than 65535 bytes, fix it by adding a quirk to set
the max sector to 65535 bytes.

INFO: task flush-11:0:663 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
flush-11:0    D 00000000ffff5ceb     0   663      2 0x00000000
 ffff88026d3b1710 0000000000000046 0000000000000001 0000000000000000
 ffff88026f2530c0 ffff88026d365860 ffff88026d3b16e0 ffffffff812ffd52
 ffff88026d4fd3d0 0000000100000001 ffff88026d3b16f0 ffff88026d3b1fd8
Call Trace:
 [<ffffffff812ffd52>] ? cfq_may_queue+0x52/0xf0
 [<ffffffff81604338>] schedule+0x18/0x30
 [<ffffffff81604392>] io_schedule+0x42/0x60
 [<ffffffff812f22bb>] get_request_wait+0xeb/0x1f0
 [<ffffffff81065660>] ? autoremove_wake_function+0x0/0x40
 [<ffffffff812eb382>] ? elv_merge+0x42/0x210
 [<ffffffff812f26ae>] __make_request+0x8e/0x4e0
 [<ffffffff812f068e>] generic_make_request+0x21e/0x5e0
 [<ffffffff812f0aad>] submit_bio+0x5d/0xd0
 [<ffffffff81141422>] submit_bh+0xf2/0x130
 [<ffffffff8114474c>] __block_write_full_page+0x1dc/0x3a0
 [<ffffffff81143f60>] ? end_buffer_async_write+0x0/0x120
 [<ffffffff811474e0>] ? blkdev_get_block+0x0/0x70
 [<ffffffff811474e0>] ? blkdev_get_block+0x0/0x70
 [<ffffffff81143f60>] ? end_buffer_async_write+0x0/0x120
 [<ffffffff811449ee>] block_write_full_page_endio+0xde/0x100
 [<ffffffff81144a20>] block_write_full_page+0x10/0x20
 [<ffffffff81148703>] blkdev_writepage+0x13/0x20
 [<ffffffff810d7525>] __writepage+0x15/0x40
 [<ffffffff810d7c0f>] write_cache_pages+0x1cf/0x3e0
 [<ffffffff810d7510>] ? __writepage+0x0/0x40
 [<ffffffff810d7e42>] generic_writepages+0x22/0x30
 [<ffffffff810d7e6f>] do_writepages+0x1f/0x40
 [<ffffffff8113ae67>] writeback_single_inode+0xe7/0x3b0
 [<ffffffff8113b574>] writeback_sb_inodes+0x184/0x280
 [<ffffffff8113bedb>] writeback_inodes_wb+0x6b/0x1a0
 [<ffffffff8113c24b>] wb_writeback+0x23b/0x2a0
 [<ffffffff8113c42d>] wb_do_writeback+0x17d/0x190
 [<ffffffff8113c48b>] bdi_writeback_task+0x4b/0xe0
 [<ffffffff810e82a0>] ? bdi_start_fn+0x0/0x100
 [<ffffffff810e8321>] bdi_start_fn+0x81/0x100
 [<ffffffff810e82a0>] ? bdi_start_fn+0x0/0x100
 [<ffffffff8106522e>] kthread+0x8e/0xa0
 [<ffffffff81039274>] ? finish_task_switch+0x54/0xc0
 [<ffffffff81003334>] kernel_thread_helper+0x4/0x10
 [<ffffffff810651a0>] ? kthread+0x0/0xa0
 [<ffffffff81003330>] ? kernel_thread_helper+0x0/0x10

 The above trace was triggered by
   "dd if=/dev/zero of=/dev/sr0 bs=2048 count=32768"

Cc: stable@vger.kernel.org
Signed-off-by: NShan Hai <shan.hai@windriver.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

The endianness attribute on the 'aux' local variable is wrong, and can
lead to wrong endianness on big-endian machines,
Signed-off-by: NMarc Carino <marc.ceeeee@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Add support for the following ATA opcodes, which are present
in SATA 3.1 and T13 ATA ACS-3:

        SEND FPDMA QUEUED
        RECEIVE FPDMA QUEUED
Signed-off-by: NMarc Carino <marc.ceeeee@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

SATA 3.1 added an "auxiliary" field to the host-to-device FIS.
Populate the host-to-device FIS with the new field via the
taskfile struct.
Signed-off-by: NMarc Carino <marc.ceeeee@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Binding ACPI handle to SCSI device has several drawbacks, namely:
1 During ATA device initialization time, ACPI handle will be needed
  while SCSI devices are not created yet. So each time ACPI handle is
  needed, instead of retrieving the handle by ACPI_HANDLE macro,
  a namespace scan is performed to find the handle for the corresponding
  ATA device. This is inefficient, and also expose a restriction on
  calling path not holding any lock.
2 The binding to SCSI device tree makes code complex, while at the same
  time doesn't bring us any benefit. All ACPI handlings are still done
  in ATA module, not in SCSI.

Rework the ATA ACPI binding code to bind ACPI handle to ATA transport
devices(ATA port and ATA device). The binding needs to be done only once,
since the ATA transport devices do not go away with hotplug. And due to
this, the flush_work call in hotplug handler for ATA bay is no longer
needed.

Tested on an Intel test platform for binding and runtime power off for
ODD(ZPODD) and hard disk; on an ASUS S400C for binding and normal boot
and S3, where its SATA port node has _SDD and _GTF control methods when
configured as an AHCI controller and its PATA device node has _GTF
control method when configured as an IDE controller. SATA PMP binding
and ATA hotplug is not tested.
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Tested-by: NDirk Griesbach <spamthis@freenet.de>
Signed-off-by: NTejun Heo <tj@kernel.org>

Commit 30dcf76a "libata: migrate ACPI code over to new bindings"
mistakenly dropped the code to register hotplug notificaion handler
for ATA port/devices, causing regression for people using ATA bay,
as kernel bug #59871 shows.

Fix this by adding back the hotplug notification handler registration
code.  Since this code has to be run once and notification needs to
be installed on every ATA port/devices handle no matter if there is
actual device attached, we can't do this in binding time for ATA
device ACPI handle, as the binding only occurs when a SCSI device is
created, i.e. there is device attached.  So introduce the
ata_acpi_hotplug_init() function to loop scan all ATA ACPI handles
and if it is available, install the notificaion handler for it during
ATA init time.

With the ATA ACPI handle binding to SCSI device tree, it is possible
now that when the SCSI hotplug work removes the SCSI device, the ACPI
unbind function will find that the corresponding ACPI device has
already been deleted by dock driver, causing a scaring message like:
[  128.263966] scsi 4:0:0:0: Oops, 'acpi_handle' corrupt
Fix this by waiting for SCSI hotplug task finish in our notificaion
handler, so that the removal of ACPI device done in ACPI unbind
function triggered by the removal of SCSI device is run earlier when
ACPI device is still available.

[rjw: Rebased]
References: https://bugzilla.kernel.org/show_bug.cgi?id=59871Reported-bisected-and-tested-by: NDirk Griesbach <spamthis@freenet.de>
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: 3.6+ <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The "runtime idle" helper routine, rpm_idle(), currently ignores
return values from .runtime_idle() callbacks executed by it.
However, it turns out that many subsystems use
pm_generic_runtime_idle() which checks the return value of the
driver's callback and executes pm_runtime_suspend() for the device
unless that value is not 0.  If that logic is moved to rpm_idle()
instead, pm_generic_runtime_idle() can be dropped and its users
will not need any .runtime_idle() callbacks any more.

Moreover, the PCI, SCSI, and SATA subsystems' .runtime_idle()
routines, pci_pm_runtime_idle(), scsi_runtime_idle(), and
ata_port_runtime_idle(), respectively, as well as a few drivers'
ones may be simplified if rpm_idle() calls rpm_suspend() after 0 has
been returned by the .runtime_idle() callback executed by it.

To reduce overall code bloat, make the changes described above.
Tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NKevin Hilman <khilman@linaro.org>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>

Some device require DMADIR to be enabled, but are not detected as such
by atapi_id_dmadir.  One such example is "Asus Serillel 2"
SATA-host-to-PATA-device bridge: the bridge itself requires DMADIR,
even if the bridged device does not.

As atapi_dmadir module parameter can cause problems with some devices
(as per Tejun Heo's memory), enabling it globally may not be possible
depending on the hardware.

This patch adds atapi_dmadir in the form of a "force" horkage value,
allowing global, per-bus and per-device control.
Signed-off-by: NVincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

libata honors DMADIR for regular commands, but not for internal commands
used (among other) during device initialisation.

This makes SATA-host-to-PATA-device bridges based on Silicon Image SiL3611
(such as "Abit Serillel 2") end up disabled when used with an ATAPI device
after a few tries.

Log output of the bridge being hot-plugged with an ATAPI drive:

  [ 9631.212901] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  [ 9631.212913] ata1: irq_stat 0x00000040, connection status changed
  [ 9631.212923] ata1: SError: { CommWake 10B8B DevExch }
  [ 9631.212939] ata1: hard resetting link
  [ 9632.104962] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [ 9632.106393] ata1.00: ATAPI: PIONEER DVD-RW  DVR-115, 1.06, max UDMA/33
  [ 9632.106407] ata1.00: applying bridge limits
  [ 9632.108151] ata1.00: configured for UDMA/33
  [ 9637.105303] ata1.00: qc timeout (cmd 0xa0)
  [ 9637.105324] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5)
  [ 9637.105335] ata1: hard resetting link
  [ 9638.044599] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [ 9638.047878] ata1.00: configured for UDMA/33
  [ 9643.044933] ata1.00: qc timeout (cmd 0xa0)
  [ 9643.044953] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5)
  [ 9643.044963] ata1: limiting SATA link speed to 1.5 Gbps
  [ 9643.044971] ata1.00: limiting speed to UDMA/33:PIO3
  [ 9643.044979] ata1: hard resetting link
  [ 9643.984225] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  [ 9643.987471] ata1.00: configured for UDMA/33
  [ 9648.984591] ata1.00: qc timeout (cmd 0xa0)
  [ 9648.984612] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5)
  [ 9648.984619] ata1.00: disabled
  [ 9649.000593] ata1: hard resetting link
  [ 9649.939902] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  [ 9649.955864] ata1: EH complete

With this patch, the drive enumerates correctly when libata is loaded with
atapi_dmadir=1:

  [ 9891.810863] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  [ 9891.810874] ata1: irq_stat 0x00000040, connection status changed
  [ 9891.810884] ata1: SError: { CommWake 10B8B DevExch }
  [ 9891.810900] ata1: hard resetting link
  [ 9892.762105] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [ 9892.763544] ata1.00: ATAPI: PIONEER DVD-RW  DVR-115, 1.06, max UDMA/33, DMADIR
  [ 9892.763558] ata1.00: applying bridge limits
  [ 9892.765393] ata1.00: configured for UDMA/33
  [ 9892.786063] ata1: EH complete
  [ 9892.792062] scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-115  1.06 PQ: 0 ANSI: 5
  [ 9892.798455] sr2: scsi3-mmc drive: 12x/12x writer dvd-ram cd/rw xa/form2 cdda tray
  [ 9892.798837] sr 0:0:0:0: Attached scsi CD-ROM sr2
  [ 9892.799109] sr 0:0:0:0: Attached scsi generic sg6 type 5

Based on a patch by Csaba Halász <csaba.halasz@gmail.com> on linux-ide:
http://marc.info/?l=linux-ide&m=136121147832295&w=2

tj: minor formatting changes.
Signed-off-by: NVincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org

While registering host controller track port number based upon number
of ports available on the controller, export port_no attribute through
/sys. This patch is needed by udev for composing persistent links in
/dev/disk/by-path.

/sys/devices/pci0000:00/0000:00:1f.2/ata8/ata_port/ata8
total 0
lrwxrwxrwx. 1 root root    0 Mar  6 12:43 device -> ../../../ata8
-r--r--r--. 1 root root 4096 Mar  6 12:43 idle_irq
-r--r--r--. 1 root root 4096 Mar  6 12:43 nr_pmp_links
-r--r--r--. 1 root root 4096 Mar  6 12:43 port_no
drwxr-xr-x. 2 root root    0 Mar  6 12:42 power
lrwxrwxrwx. 1 root root    0 Mar  6 12:41 subsystem -> ../../../../../../class/ata_port
-rw-r--r--. 1 root root 4096 Mar  6 12:40 uevent
1
Signed-off-by: NDavid Milburn <dmilburn@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Jeff moved on to a greener pasture.

 s/Maintained by: Jeff Garzik/Maintained by: Tejun Heo/g
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jeff Garzik <jgarzik@pobox.com>

Commit 803739d2 ("[libata] replace
sata_settings with devslp_timing"), which was also Cc: stable, used a
stack buffer to receive data from ata_read_log_page(), which triggers
the following warning:
 ahci 0000:00:1f.2: DMA-API: device driver maps memory fromstack [addr=ffff880140469948]

Fix this by using ap->sector_buf instead of a stack buffer.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The Slimtype DVD A  DS8A8SH drive locks up when max sector is smaller than
65535, and the blow backtrace is observed on locking up:

INFO: task flush-8:32:1130 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
flush-8:32      D ffffffff8180cf60     0  1130      2 0x00000000
 ffff880273aef618 0000000000000046 0000000000000005 ffff880273aee000
 ffff880273aee000 ffff880273aeffd8 ffff880273aee010 ffff880273aee000
 ffff880273aeffd8 ffff880273aee000 ffff88026e842ea0 ffff880274a10000
Call Trace:
 [<ffffffff8168fc2d>] schedule+0x5d/0x70
 [<ffffffff8168fccc>] io_schedule+0x8c/0xd0
 [<ffffffff81324461>] get_request+0x731/0x7d0
 [<ffffffff8133dc60>] ? cfq_allow_merge+0x50/0x90
 [<ffffffff81083aa0>] ? wake_up_bit+0x40/0x40
 [<ffffffff81320443>] ? bio_attempt_back_merge+0x33/0x110
 [<ffffffff813248ea>] blk_queue_bio+0x23a/0x3f0
 [<ffffffff81322176>] generic_make_request+0xc6/0x120
 [<ffffffff81322308>] submit_bio+0x138/0x160
 [<ffffffff811d7596>] ? bio_alloc_bioset+0x96/0x120
 [<ffffffff811d1f61>] submit_bh+0x1f1/0x220
 [<ffffffff811d48b8>] __block_write_full_page+0x228/0x340
 [<ffffffff811d3650>] ? attach_nobh_buffers+0xc0/0xc0
 [<ffffffff811d8960>] ? I_BDEV+0x10/0x10
 [<ffffffff811d8960>] ? I_BDEV+0x10/0x10
 [<ffffffff811d4ab6>] block_write_full_page_endio+0xe6/0x100
 [<ffffffff811d4ae5>] block_write_full_page+0x15/0x20
 [<ffffffff811d9268>] blkdev_writepage+0x18/0x20
 [<ffffffff81142527>] __writepage+0x17/0x40
 [<ffffffff811438ba>] write_cache_pages+0x34a/0x4a0
 [<ffffffff81142510>] ? set_page_dirty+0x70/0x70
 [<ffffffff81143a61>] generic_writepages+0x51/0x80
 [<ffffffff81143ab0>] do_writepages+0x20/0x50
 [<ffffffff811c9ed6>] __writeback_single_inode+0xa6/0x2b0
 [<ffffffff811ca861>] writeback_sb_inodes+0x311/0x4d0
 [<ffffffff811caaa6>] __writeback_inodes_wb+0x86/0xd0
 [<ffffffff811cad43>] wb_writeback+0x1a3/0x330
 [<ffffffff816916cf>] ? _raw_spin_lock_irqsave+0x3f/0x50
 [<ffffffff811b8362>] ? get_nr_inodes+0x52/0x70
 [<ffffffff811cb0ac>] wb_do_writeback+0x1dc/0x260
 [<ffffffff8168dd34>] ? schedule_timeout+0x204/0x240
 [<ffffffff811cb232>] bdi_writeback_thread+0x102/0x2b0
 [<ffffffff811cb130>] ? wb_do_writeback+0x260/0x260
 [<ffffffff81083550>] kthread+0xc0/0xd0
 [<ffffffff81083490>] ? kthread_worker_fn+0x1b0/0x1b0
 [<ffffffff8169a3ec>] ret_from_fork+0x7c/0xb0
 [<ffffffff81083490>] ? kthread_worker_fn+0x1b0/0x1b0

 The above trace was triggered by
   "dd if=/dev/zero of=/dev/sr0 bs=2048 count=32768"

 It was previously working by accident, since another bug introduced
 by 4dce8ba9 (libata: Use 'bool' return value for ata_id_XXX) caused
 all drives to use maxsect=65535.

Cc: stable@vger.kernel.org
Signed-off-by: NShan Hai <shan.hai@windriver.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

For system freeze, if the port is already runtime suspended, leave it
alone and just return. The port will be resumed on thaw before it will
be used.

And since we will call get_noresume for every device during prepare
phase, and the port is resumed during thaw phase, it can't be in runtime
suspended state during the poweroff phase. So remove the
runtime_suspended check in poweroff callback.

And for all suspend(freeze/suspend/poweroff/etc.), there is no need to
touch the device, so set no_autopsy and no_recovery for them all.
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

We need to do different things for system PM and runtime PM, e.g. we do
not need to enable runtime wake for ZPODD when we are doing system
suspend, etc.

Currently, we use PMSG_SUSPEND for both system suspend and runtime
suspend and PMSG_ON for both system resume and runtime resume. Change
this by using PMSG_AUTO_SUSPEND for runtime suspend and PMSG_AUTO_RESUME
for runtime resume. And since PMSG_ON means no transition, it is changed
to PMSG_RESUME for ata port's system resume.

The ata_acpi_set_state is modified accordingly, and the sata case and
pata case is seperated for easy reading.
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This reverts commit 1757d902.

Discussion continues upstream.

For ODDs, the upper layer will poll for media change every few
seconds, which will make it enter and leave suspend state very
often. And as each suspend will also cause a hard/soft reset,
the gain of runtime suspend is very little while the ODD may
malfunction after constantly being reset. So the idle callback
here will not proceed to suspend if a non-ZPODD capable ODD is
attached to the port.
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The ODD can be enabled for ZPODD if the following three conditions are
satisfied:
1 The ODD supports device attention;
2 The platform can runtime power off the ODD through ACPI;
3 The ODD is either slot type or drawer type.
For such ODDs, zpodd_init is called and a new structure is allocated for
it to store ZPODD related stuffs.

And the zpodd_dev_enabled function is used to test if ZPODD is currently
enabled for this ODD.

A new config CONFIG_SATA_ZPODD is added to selectively build ZPODD code.
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

As low-level drivers register their host controller(s), keep track
of the number of controllers and export thru /sys in a <host.port>
format so that udev can better match up port numbers with a
specific controller.

# pwd
/sys/devices/pci0000:00
# find . -name 'ata*' -print

(2nd controller with port multiplier attached)

./0000:00:1e.0/0000:05:01.0/ata2.7
./0000:00:1e.0/0000:05:01.0/ata2.7/link7/dev7.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.0/dev7.0.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.0/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.1/dev7.1.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.1/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.2/dev7.2.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.2/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.3/dev7.3.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.3/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.4/dev7.4.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.4/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.5/dev7.5.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.5/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.6/dev7.6.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.6/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.7/dev7.7.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.7/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.8/dev7.8.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.8/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.9/dev7.9.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.9/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/ata_port
./0000:00:1e.0/0000:05:01.0/ata2.7/ata_port/ata2.7
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.10/dev7.10.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.10/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.11/dev7.11.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.11/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.12/dev7.12.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.12/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.13/dev7.13.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.13/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.14/dev7.14.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.14/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.8
./0000:00:1e.0/0000:05:01.0/ata2.8/link8/dev8.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.8/link8/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.8/ata_port
./0000:00:1e.0/0000:05:01.0/ata2.8/ata_port/ata2.8

(1st controller)

./0000:00:1f.2/ata1.1
./0000:00:1f.2/ata1.1/link1/dev1.0/ata_device
./0000:00:1f.2/ata1.1/link1/ata_link
./0000:00:1f.2/ata1.1/ata_port
./0000:00:1f.2/ata1.1/ata_port/ata1.1
./0000:00:1f.2/ata1.2
./0000:00:1f.2/ata1.2/link2/dev2.0/ata_device
./0000:00:1f.2/ata1.2/link2/ata_link
./0000:00:1f.2/ata1.2/ata_port
./0000:00:1f.2/ata1.2/ata_port/ata1.2
./0000:00:1f.2/ata1.3
./0000:00:1f.2/ata1.3/link3/dev3.0/ata_device
./0000:00:1f.2/ata1.3/link3/ata_link
./0000:00:1f.2/ata1.3/ata_port
./0000:00:1f.2/ata1.3/ata_port/ata1.3
./0000:00:1f.2/ata1.4
./0000:00:1f.2/ata1.4/link4/dev4.0/ata_device
./0000:00:1f.2/ata1.4/link4/ata_link
./0000:00:1f.2/ata1.4/ata_port
./0000:00:1f.2/ata1.4/ata_port/ata1.4
./0000:00:1f.2/ata1.5
./0000:00:1f.2/ata1.5/link5/dev5.0/ata_device
./0000:00:1f.2/ata1.5/link5/ata_link
./0000:00:1f.2/ata1.5/ata_port
./0000:00:1f.2/ata1.5/ata_port/ata1.5
./0000:00:1f.2/ata1.6
./0000:00:1f.2/ata1.6/link6/dev6.0/ata_device
./0000:00:1f.2/ata1.6/link6/ata_link
./0000:00:1f.2/ata1.6/ata_port
./0000:00:1f.2/ata1.6/ata_port/ata1.6
Signed-off-by: NDavid Milburn <dmilburn@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

NCQ capability was used to check availability of SATA Settings page
from Identify Device Data Log, which contains DevSlp timing variables.
It does not work on some HDDs and leads to error messages.

IDENTIFY word 78 bit 5(Hardware Feature Control) can't work either
because it is only the sufficient condition of Identify Device data
log, not the necessary condition.

This patch replaced ata_device->sata_settings with ->devslp_timing
to only save DevSlp timing variables(8 bytes), instead of the whole
SATA Settings page(512 bytes).

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=51881Reported-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NShane Huang <shane.huang@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This reverts commit de90cd71.

Shane Huang writes:

  Please suspend this patch because I just received two new
  DevSlp drives but found word 78 bit 5 is _not_ set.

  I'm checking with the drive vendor whether he gave me
  the wrong information. If bit 5 is not the necessary and
  sufficient condition, I will implement another patch to
  replace ata_device->sata_settings into ->devslp_timing.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>