提交 966fbe19 编写于 作者: V Vincent Pelletier 提交者: Tejun Heo

libata: Add atapi_dmadir force flag

Some device require DMADIR to be enabled, but are not detected as such
by atapi_id_dmadir.  One such example is "Asus Serillel 2"
SATA-host-to-PATA-device bridge: the bridge itself requires DMADIR,
even if the bridged device does not.

As atapi_dmadir module parameter can cause problems with some devices
(as per Tejun Heo's memory), enabling it globally may not be possible
depending on the hardware.

This patch adds atapi_dmadir in the form of a "force" horkage value,
allowing global, per-bus and per-device control.
Signed-off-by: NVincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
上级 e628dc99
......@@ -1456,6 +1456,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
* dump_id: dump IDENTIFY data.
* atapi_dmadir: Enable ATAPI DMADIR bridge support
If there are multiple matching configurations changing
the same attribute, the last one is used.
......
......@@ -2395,7 +2395,7 @@ int ata_dev_configure(struct ata_device *dev)
cdb_intr_string = ", CDB intr";
}
if (atapi_dmadir || atapi_id_dmadir(dev->id)) {
if (atapi_dmadir || (dev->horkage & ATA_HORKAGE_ATAPI_DMADIR) || atapi_id_dmadir(dev->id)) {
dev->flags |= ATA_DFLAG_DMADIR;
dma_dir_string = ", DMADIR";
}
......@@ -6496,6 +6496,7 @@ static int __init ata_parse_force_one(char **cur,
{ "nosrst", .lflags = ATA_LFLAG_NO_SRST },
{ "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
{ "rstonce", .lflags = ATA_LFLAG_RST_ONCE },
{ "atapi_dmadir", .horkage_on = ATA_HORKAGE_ATAPI_DMADIR },
};
char *start = *cur, *p = *cur;
char *id, *val, *endp;
......
......@@ -399,6 +399,7 @@ enum {
ATA_HORKAGE_BROKEN_FPDMA_AA = (1 << 15), /* skip AA */
ATA_HORKAGE_DUMP_ID = (1 << 16), /* dump IDENTIFY data */
ATA_HORKAGE_MAX_SEC_LBA48 = (1 << 17), /* Set max sects to 65535 */
ATA_HORKAGE_ATAPI_DMADIR = (1 << 18), /* device requires dmadir */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册