The MTT (Memory Translate Table) interface is no longer used to configure
the buffer address to BT (Base Address Table) that requires driver
mapping.  Because the MTT is not compatible with multi-hop addressing of
the hip08, it is replaced by MTR (Memory Translate Region) interface, and
all the MTT functions should be removed.

Link: https://lore.kernel.org/r/1588071823-40200-3-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

PBL table has its own implementation for multi-hop addressing currently,
but for the hardware, all table's addressing use the same logic, there is
no need to implement repeatedly. So optimize the PBL buffer allocation
process by using the mtr's interfaces.

Link: https://lore.kernel.org/r/1588071823-40200-2-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Calculate UDP source port based on the grh.flow_label. If grh.flow_label
is not valid, we will use minimal supported UDP source port.

Link: https://lore.kernel.org/r/20200504051935.269708-6-leon@kernel.orgSigned-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Calculate and set UDP source port based on the flow label. If flow label
is not defined in GRH then calculate it based on lqpn/rqpn.

Link: https://lore.kernel.org/r/20200504051935.269708-4-leon@kernel.orgSigned-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add a new stat that counts admin commands failures, which might help when
debugging different issues.

Link: https://lore.kernel.org/r/20200420062213.44577-4-galpress@amazon.comReviewed-by: NDaniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add a new stat that counts mmap failures, which might help when debugging
different issues.

Link: https://lore.kernel.org/r/20200420062213.44577-3-galpress@amazon.comReviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Create CQ errors are already being counted, report them along all other
counters.

Link: https://lore.kernel.org/r/20200420062213.44577-2-galpress@amazon.comReviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The patch sets the lag tx affinity of the data QPs and the GSI QPs
according to the LAG xmit slave.

For GSI QPs, in case the link layer is Ethenet (RoCE) we create two GSI
QPs, one for each physical port. When the driver selects the GSI QP, it
will consider the port affinity result.  For connected QPs, the driver
sets the affinity of the xmit slave.

The above, ensures that RC QP and it's corresponding GSI QP will transmit
from the same physical port.

Link: https://lore.kernel.org/r/20200430192146.12863-17-maorg@mellanox.comSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Move affinity related code in modify qp to function.  It's a preparation
for next patch the extend the affinity calculation to consider the xmit
slave.

Link: https://lore.kernel.org/r/20200430192146.12863-16-maorg@mellanox.comSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Following patch adds additional argument to the create AH function, so it
make sense to group ah_attr and flags arguments in struct.

Link: https://lore.kernel.org/r/20200430192146.12863-13-maorg@mellanox.comSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Acked-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Acked-by: NGal Pressman <galpress@amazon.com>
Acked-by: NWeihang Li <liweihang@huawei.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

RAW packet QP and underlay QP must be created with either
RQ or SQ, check that.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20200427154636.381474-37-leon@kernel.orgSigned-off-by: NAharon Landau <aharonl@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Finish separation to blocks of mlx5_ib_create_qp() functions,
so all internal create QP implementation are located in one place.

Link: https://lore.kernel.org/r/20200427154636.381474-36-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

After major refactoring in create QP flow, it is no needed to call
to destroy QP in XRC_TGT flow.

Link: https://lore.kernel.org/r/20200427154636.381474-35-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Update all the places in create QP flows to copy response
to the user in one place.

Link: https://lore.kernel.org/r/20200427154636.381474-34-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Place in one function all udata size checks. This will allow
us move ib_copy_to_udata() in general place and ensure that
it will be performed after call to the FW.

Link: https://lore.kernel.org/r/20200427154636.381474-33-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Move check that user didn't supplied RSS RAW QP unsupported
command flags to the function that checks all such flags.

Link: https://lore.kernel.org/r/20200427154636.381474-32-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The amount of parameters passed in and out between internal mlx5
create QP functions is too large to easily follow the flow. Change
it by grouping all create QP parameter into one structure.

Link: https://lore.kernel.org/r/20200427154636.381474-31-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Delete both PD argument and checks if udata was provided, in favour
of unified destroy QP functions.

Link: https://lore.kernel.org/r/20200427154636.381474-30-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The kernel and user create QP flows have very little common code,
separate them to simplify the future work of creating per-type
create_*_qp() functions.

Link: https://lore.kernel.org/r/20200427154636.381474-29-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

XRC_TGT QP doesn't fail into kernel or user flow separation. It is
initiated by the user, but is created through in-kernel verbs flow
and doesn't have PD and udata in similar way to kernel QPs.

So let's separate creation of that QP type from the common flow.

Link: https://lore.kernel.org/r/20200427154636.381474-28-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove duplication in parsing of DEVX UID.

Link: https://lore.kernel.org/r/20200427154636.381474-27-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The inlen is set to be above zero in all flows before
and can't be negative at this stage.

Link: https://lore.kernel.org/r/20200427154636.381474-26-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Instead of keeping special field to separate kernel/user create/destroy
flows, rely on existence of udata pointer. All allocation flows are
using kzalloc() and leave uninitialized pointers as NULL which makes
MLX5_QP_EMPTY and MLX5_QP_KERNEL flows to be the same.

Link: https://lore.kernel.org/r/20200427154636.381474-25-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Combine copy_from_user() from create_user_qp() and general code.

Link: https://lore.kernel.org/r/20200427154636.381474-24-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Change the create QP flow to handle all copy_from_user() operations in
one place.

Link: https://lore.kernel.org/r/20200427154636.381474-23-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Perform check of attributes of RAW PACKET QP in separate function.

Link: https://lore.kernel.org/r/20200427154636.381474-22-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

QP type is stored in the IB/core QP struct, but it doesn't have all the
needed information, like internal QP type used in the driver itself.
Update mlx5_ib to have cached QP type which includes both IBTA and
Mellanox specific one.

Such change allows us to make even further cleanup of QP creation flow.

Link: https://lore.kernel.org/r/20200427154636.381474-21-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is no need to explicitly check unsupported QP types,
rely on  "default" keyword in switch-case to catch them.

Link: https://lore.kernel.org/r/20200427154636.381474-20-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Check that vendor flags provided through ucmd are valid.

Link: https://lore.kernel.org/r/20200427154636.381474-19-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The "flags" field in struct mlx5_ib_qp contains all UAPI flags
configured at the create QP stage. Return all the data as is
without masking.

Link: https://lore.kernel.org/r/20200427154636.381474-18-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In similar way to wqe_sig, the scat_cqe was treated differently from
other create QP vendor flags. Change it to be similar to other flags
and use flags_en mechanism.

Link: https://lore.kernel.org/r/20200427154636.381474-17-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

MLX5_QP_FLAG_SIGNATURE is exposed to the users but in the kernel
the create_qp flow treated it differently from other MLX5_QP_FLAG_*s.
Fix it by ditching wq_sig boolean variable and use general flag_en
mechanism.

Link: https://lore.kernel.org/r/20200427154636.381474-16-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

create_flags is checked in too many places and scattered across all
the code, consolidate all the checks inside one function, so we will
be easily see the flow. As part of such change, delete unreachable code,
because IB/core is responsible sanitize the input.

Link: https://lore.kernel.org/r/20200427154636.381474-15-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is no point in redefinition of stable and exposed to users create
flags. Their values won't be changed and it is equal to used by the
mlx5. Delete the mlx5 definitions and use IB/core fields.

Link: https://lore.kernel.org/r/20200427154636.381474-14-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Create initial function for IB_QPT_RAW_PACKET flow.

Link: https://lore.kernel.org/r/20200427154636.381474-13-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Change the common code to use already copied user command buffer.

Link: https://lore.kernel.org/r/20200427154636.381474-12-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Perform validation of DRIVER QP in relevant function.

Link: https://lore.kernel.org/r/20200427154636.381474-11-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Instead of overwriting QP init attributes with driver QP subtype,
use that subtype directly. This change will allow us to remove
logic which cached QP init attributes.

Link: https://lore.kernel.org/r/20200427154636.381474-10-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

DCT QPs have separate creation flow and can be easily extracted
from configure_responder_scat_cqe(), this makes both updated
functions more clear.

Link: https://lore.kernel.org/r/20200427154636.381474-9-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Move driver QP creation flow to separate functions to simplify
the create_qp() and allow future separation of create_qp_common()
to subtypes.

Link: https://lore.kernel.org/r/20200427154636.381474-8-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>