The MTT (Memory Translate Table) interface is no longer used to configure
the buffer address to BT (Base Address Table) that requires driver
mapping.  Because the MTT is not compatible with multi-hop addressing of
the hip08, it is replaced by MTR (Memory Translate Region) interface, and
all the MTT functions should be removed.

Link: https://lore.kernel.org/r/1588071823-40200-3-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

PBL table has its own implementation for multi-hop addressing currently,
but for the hardware, all table's addressing use the same logic, there is
no need to implement repeatedly. So optimize the PBL buffer allocation
process by using the mtr's interfaces.

Link: https://lore.kernel.org/r/1588071823-40200-2-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Calculate UDP source port based on the grh.flow_label. If grh.flow_label
is not valid, we will use minimal supported UDP source port.

Link: https://lore.kernel.org/r/20200504051935.269708-6-leon@kernel.orgSigned-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

If flow label is not set by the user or it's not IPv4, initialize it with
the cma src/dst based on the "Kernighan and Ritchie's hash function".

Link: https://lore.kernel.org/r/20200504051935.269708-5-leon@kernel.orgSigned-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Calculate and set UDP source port based on the flow label. If flow label
is not defined in GRH then calculate it based on lqpn/rqpn.

Link: https://lore.kernel.org/r/20200504051935.269708-4-leon@kernel.orgSigned-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use rdma_flow_label_to_udp_sport to calculate the UDP source port of the
RoCEV2 packet.

Link: https://lore.kernel.org/r/20200504051935.269708-3-leon@kernel.orgSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add two hash functions to distribute RoCE v2 UDP source and Flowlabel
symmetrically. These are user visible API and any change in the
implementation needs to be tested for inter-operability between old and
new variant.

Link: https://lore.kernel.org/r/20200504051935.269708-2-leon@kernel.orgSigned-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When a client is added it isn't allowed to fail, but all the client's have
various failure paths within their add routines.

This creates the very fringe condition where the client was added, failed
during add and didn't set the client_data. The core code will then still
call other client_data centric ops like remove(), rename(), get_nl_info(),
and get_net_dev_by_params() with NULL client_data - which is confusing and
unexpected.

If the add() callback fails, then do not call any more client ops for the
device, even remove.

Remove all the now redundant checks for NULL client_data in ops callbacks.

Update all the add() callbacks to return error codes
appropriately. EOPNOTSUPP is used for cases where the ULP does not support
the ib_device - eg because it only works with IB.

Link: https://lore.kernel.org/r/20200421172440.387069-1-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Snoop interface is not used. Remove it.

Link: https://lore.kernel.org/r/20200413132408.931084-1-leon@kernel.orgSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add a new stat that counts admin commands failures, which might help when
debugging different issues.

Link: https://lore.kernel.org/r/20200420062213.44577-4-galpress@amazon.comReviewed-by: NDaniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add a new stat that counts mmap failures, which might help when debugging
different issues.

Link: https://lore.kernel.org/r/20200420062213.44577-3-galpress@amazon.comReviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Create CQ errors are already being counted, report them along all other
counters.

Link: https://lore.kernel.org/r/20200420062213.44577-2-galpress@amazon.comReviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The patch sets the lag tx affinity of the data QPs and the GSI QPs
according to the LAG xmit slave.

For GSI QPs, in case the link layer is Ethenet (RoCE) we create two GSI
QPs, one for each physical port. When the driver selects the GSI QP, it
will consider the port affinity result.  For connected QPs, the driver
sets the affinity of the xmit slave.

The above, ensures that RC QP and it's corresponding GSI QP will transmit
from the same physical port.

Link: https://lore.kernel.org/r/20200430192146.12863-17-maorg@mellanox.comSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Move affinity related code in modify qp to function.  It's a preparation
for next patch the extend the affinity calculation to consider the xmit
slave.

Link: https://lore.kernel.org/r/20200430192146.12863-16-maorg@mellanox.comSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add a call to rdma_lag_get_ah_roce_slave() when the address handle is
created. Lower driver can use it to select the QP's affinity port.

Link: https://lore.kernel.org/r/20200430192146.12863-15-maorg@mellanox.comSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add support to get the RoCE LAG xmit slave by building skb of the RoCE
packet and call to master_get_xmit_slave.  If driver wants to get the
slave assume all slaves are available, then need to set
RDMA_LAG_FLAGS_HASH_ALL_SLAVES in flags.

Link: https://lore.kernel.org/r/20200430192146.12863-14-maorg@mellanox.comSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Following patch adds additional argument to the create AH function, so it
make sense to group ah_attr and flags arguments in struct.

Link: https://lore.kernel.org/r/20200430192146.12863-13-maorg@mellanox.comSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Acked-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Acked-by: NGal Pressman <galpress@amazon.com>
Acked-by: NWeihang Li <liweihang@huawei.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

From the mlx5-next branch at
  git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

Required for dependencies in following patches

* mellanox/mlx5-next:
  net/mlx5: Add support to get lag physical port
  net/mlx5: Change lag mutex lock to spin lock
  bonding: Implement ndo_get_xmit_slave
  bonding: Add array of all slaves
  bonding: Add function to get the xmit slave in active-backup mode
  bonding: Add helper function to get the xmit slave in rr mode
  bonding: Add helper function to get the xmit slave based on hash
  bonding/alb: Add helper functions to get the xmit slave
  bonding: Rename slave_arr to usable_slaves
  bonding: Export skip slave logic to function
  net/core: Introduce netdev_get_xmit_slave

Add function to get the device physical port of the lag slave.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The lag lock could be a spin lock, the critical section is short
and there is no need that the thread will sleep.
Change the lock that protects the LAG structure from mutex
to spin lock. It is required for next patch that need to
access this structure from context that we can't sleep.
In addition there is no need to hold this lock when query the
congestion counters.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add implementation of ndo_get_xmit_slave. Find the slave by using the
helper function according to the bond mode. If the caller set all_slaves
to true, then it assumes that all slaves are available to transmit.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Keep all slaves in array so it could be used to get the xmit slave
assume all the slaves are active.
The logic to add slave to the array is like the usable slaves, except
that we also add slaves that currently can't transmit - not up or active.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add helper function to get the xmit slave in active-backup mode.
It's only one line function that return the curr_active_slave,
but it will used both in the xmit flow and by the new .ndo to get
the xmit slave.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add helper function to get the xmit slave when bond is in round
robin mode. Change bond_xmit_slave_id to bond_get_slave_by_id, then
the logic for find the next slave for transmit could be used
both by the xmit flow and the .ndo to get the xmit slave.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Both xor and 802.3ad modes use bond_xmit_hash to get the xmit slave.
Export the logic to helper function so it could be used in the
following patches by the .ndo to get the xmit slave.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add two helper functions to get the xmit slave of bond in alb or tlb
mode. Extract the logic of find the xmit slave from the xmit flow
to function. Xmit flow will xmit through this slave and in the
following patches the new .ndo will call to the helper function
to return the xmit slave.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Rename slave_arr to usable_slaves, since we will have two arrays,
one for the usable slaves and the other to all slaves.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

As a preparation for following change that add array of
all slaves, extract code that skip slave to function.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add new ndo to get the xmit slave of master device. The reference
counters are not incremented so the caller must be careful with locks.
User can ask to get the xmit slave assume all the slaves can
transmit by set all_slaves arg to true.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

RAW packet QP and underlay QP must be created with either
RQ or SQ, check that.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20200427154636.381474-37-leon@kernel.orgSigned-off-by: NAharon Landau <aharonl@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Finish separation to blocks of mlx5_ib_create_qp() functions,
so all internal create QP implementation are located in one place.

Link: https://lore.kernel.org/r/20200427154636.381474-36-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

After major refactoring in create QP flow, it is no needed to call
to destroy QP in XRC_TGT flow.

Link: https://lore.kernel.org/r/20200427154636.381474-35-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Update all the places in create QP flows to copy response
to the user in one place.

Link: https://lore.kernel.org/r/20200427154636.381474-34-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Place in one function all udata size checks. This will allow
us move ib_copy_to_udata() in general place and ensure that
it will be performed after call to the FW.

Link: https://lore.kernel.org/r/20200427154636.381474-33-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Move check that user didn't supplied RSS RAW QP unsupported
command flags to the function that checks all such flags.

Link: https://lore.kernel.org/r/20200427154636.381474-32-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The amount of parameters passed in and out between internal mlx5
create QP functions is too large to easily follow the flow. Change
it by grouping all create QP parameter into one structure.

Link: https://lore.kernel.org/r/20200427154636.381474-31-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Delete both PD argument and checks if udata was provided, in favour
of unified destroy QP functions.

Link: https://lore.kernel.org/r/20200427154636.381474-30-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The kernel and user create QP flows have very little common code,
separate them to simplify the future work of creating per-type
create_*_qp() functions.

Link: https://lore.kernel.org/r/20200427154636.381474-29-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

XRC_TGT QP doesn't fail into kernel or user flow separation. It is
initiated by the user, but is created through in-kernel verbs flow
and doesn't have PD and udata in similar way to kernel QPs.

So let's separate creation of that QP type from the common flow.

Link: https://lore.kernel.org/r/20200427154636.381474-28-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove duplication in parsing of DEVX UID.

Link: https://lore.kernel.org/r/20200427154636.381474-27-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>