kmemleak reports memory leaks in macvlan_common_newlink, as follows:

 ip link add link eth0 name .. type macvlan mode source macaddr add
 <MAC-ADDR>

kmemleak reports:

unreferenced object 0xffff8880109bb140 (size 64):
  comm "ip", pid 284, jiffies 4294986150 (age 430.108s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 b8 aa 5a 12 80 88 ff ff  ..........Z.....
    80 1b fa 0d 80 88 ff ff 1e ff ac af c7 c1 6b 6b  ..............kk
  backtrace:
    [<ffffffff813e06a7>] kmem_cache_alloc_trace+0x1c7/0x300
    [<ffffffff81b66025>] macvlan_hash_add_source+0x45/0xc0
    [<ffffffff81b66a67>] macvlan_changelink_sources+0xd7/0x170
    [<ffffffff81b6775c>] macvlan_common_newlink+0x38c/0x5a0
    [<ffffffff81b6797e>] macvlan_newlink+0xe/0x20
    [<ffffffff81d97f8f>] __rtnl_newlink+0x7af/0xa50
    [<ffffffff81d98278>] rtnl_newlink+0x48/0x70
    ...

In the scenario where the macvlan mode is configured as 'source',
macvlan_changelink_sources() will be execured to reconfigure list of
remote source mac addresses, at the same time, if register_netdevice()
return an error, the resource generated by macvlan_changelink_sources()
is not cleaned up.

Using this patch, in the case of an error, it will execute
macvlan_flush_sources() to ensure that the resource is cleaned up.

Fixes: aa5fd0fb ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.")
Signed-off-by: NChuang Wang <nashuiliang@gmail.com>
Link: https://lore.kernel.org/r/20221109090735.690500-1-nashuiliang@gmail.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>

When alloc tx/rx ring failed in tsi108_open(), it doesn't free irq. Fix
it.

Fixes: 5e123b84 ("[PATCH] Add tsi108/9 On Chip Ethernet device driver support")
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109044016.126866-1-shaozhengchao@huawei.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>

When failed to init rxq or txq in mv643xx_eth_open() for opening device,
napi isn't disabled. When open mv643xx_eth device next time, it will
trigger a BUG_ON() in napi_enable(). Compile tested only.

Fixes: 2257e05c ("mv643xx_eth: get rid of receive-side locking")
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109025432.80900-1-shaozhengchao@huawei.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>

When failed to start nic or add interrupt service routine in
s2io_card_up() for opening device, napi isn't disabled. When open
s2io device next time, it will trigger a BUG_ON()in napi_enable().
Compile tested only.

Fixes: 5f490c96 ("S2io: Fixed synchronization between scheduling of napi with card reset and close")
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109023741.131552-1-shaozhengchao@huawei.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>

Commit aaab73f8 ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the atlantic driver made a copy and did
not clear it. Fix this.

[4 Fixes tags below, all part of the same series, no need to split this]

Fixes: 9ff40a75 ("net: atlantic: MACSec ingress offload implementation")
Fixes: b8f8a0b7 ("net: atlantic: MACSec ingress offload HW bindings")
Fixes: 27736563 ("net: atlantic: MACSec egress offload implementation")
Fixes: 9d106c6d ("net: atlantic: MACSec egress offload HW bindings")
Signed-off-by: NAntoine Tenart <atenart@kernel.org>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

Commit aaab73f8 ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the MSCC PHY driver made a copy, kept
it in the flow data and did not clear it when freeing a flow. Fix this.

Fixes: 28c5107a ("net: phy: mscc: macsec support")
Signed-off-by: NAntoine Tenart <atenart@kernel.org>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

The node returned by of_get_child_by_name() with refcount decremented,
of_node_put() needs be called when finish using it. So add it in the
error path in loongson_dwmac_probe() and in loongson_dwmac_remove().

Fixes: 2ae34111 ("stmmac: dwmac-loongson: fix invalid mdio_node")
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

Add missing pci_disable_device() in the error path in loongson_dwmac_probe().

Fixes: 30bba69d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

pci_enable_msi() has been called in loongson_dwmac_probe(),
so pci_disable_msi() needs be called in remove path and error
path of probe().

Fixes: 30bba69d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

When t4vf_update_port_info() failed in cxgb4vf_open(), resources applied
during adapter goes up are not cleared. Fix it. Only be compiled, not be
tested.

Fixes: 18d79f72 ("cxgb4vf: Update port information in cxgb4vf_open()")
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109012100.99132-1-shaozhengchao@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Current Intel platform has an output of ~976ms interval
when probed on 1 Pulse-per-Second(PPS) hardware pin.

The correct PTP clock frequency for PCH GbE should be 204.8MHz
instead of 200MHz. PSE GbE PTP clock rate remains at 200MHz.

Fixes: 58da0cfa ("net: stmmac: create dwmac-intel.c to contain all Intel platform")
Signed-off-by: NLing Pei Lee <pei.lee.ling@intel.com>
Signed-off-by: NTan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: NVoon Weifeng <weifeng.voon@intel.com>
Signed-off-by: NGan Yi Fang <yi.fang.gan@intel.com>
Link: https://lore.kernel.org/r/20221108020811.12919-1-yi.fang.gan@intel.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

When failed to bind qsets in cxgb_up() for opening device, napi isn't
disabled. When open cxgb3 device next time, it will trigger a BUG_ON()
in napi_enable(). Compile tested only.

Fixes: 48c4b6db ("cxgb3 - fix port up/down error path")
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109021451.121490-1-shaozhengchao@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

When failed to create xdp rxqs or fill rx channels in cpsw_ndo_open() for
opening device, napi isn't disabled. When open cpsw device next time, it
will report a invalid opcode issue. Compiled tested only.

Fixes: d354eb85 ("drivers: net: cpsw: dual_emac: simplify napi usage")
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109011537.96975-1-shaozhengchao@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Include linux/vmalloc.h in iosm_ipc_coredump.c &
iosm_ipc_devlink.c to resolve kernel test robot errors.
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NM Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Data stall seen during peak DL throughput test & packets are
dropped by mux layer due to invalid header type in datagram.

During initlization Mux aggregration protocol is set to default
UL/DL size and TD count of Mux lite protocol. This configuration
mismatch between device and driver is resulting in data stall/packet
drops.

Override the UL/DL size and TD count for Mux aggregation protocol.

Fixes: 1f52d7b6 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: NM Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With INTEL_IOMMU disable config or by forcing intel_iommu=off from
grub some of the features of IOSM driver like browsing, flashing &
coredump collection is not working.

When driver calls DMA API - dma_map_single() for tx transfers. It is
resulting in dma mapping error.

Set the device DMA addressing capabilities using dma_set_mask() and
remove the INTEL_IOMMU dependency in kconfig so that driver follows
the platform config either INTEL_IOMMU enable or disable.

Fixes: f7af616c ("net: iosm: infrastructure")
Signed-off-by: NM Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to
obtain the wwan power state configuration from BIOS but is
not freeing the acpi_object. The acpi_evaluate_dsm() returned
acpi_object to be freed.

Free the acpi_object after use.

Fixes: 7e98d785 ("net: iosm: entry point")
Signed-off-by: NM Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously, the default number of transmit queues was 16. Due to
resource concerns, set to 8 queues instead. Still allow the user
to set more queues (max 16) if they like.

Since the driver is virtualized away from the physical NIC, the purpose
of multiple queues is purely to allow for parallel calls to the
hypervisor. Therefore, there is no noticeable effect on performance by
reducing queue count to 8.

Fixes: d926793c ("ibmveth: Implement multi queue on xmit")
Reported-by: NDave Taht <dave.taht@gmail.com>
Signed-off-by: NNick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20221107203215.58206-1-nnac123@linux.ibm.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

When failed to enable interrupts in nixge_open() for opening device,
napi isn't disabled. When open nixge device next time, it will reports
a invalid opcode issue. Fix it. Only be compiled, not be tested.

Fixes: 492caffa ("net: ethernet: nixge: Add support for National Instruments XGE netdev")
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221107101443.120205-1-shaozhengchao@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

A recent patch exposed another issue in napi_get_frags()
caught by syzbot [1]

Before feeding packets to GRO, and calling napi_complete()
we must first grab NAPI_STATE_SCHED.

[1]
WARNING: CPU: 0 PID: 3612 at net/core/dev.c:6076 napi_complete_done+0x45b/0x880 net/core/dev.c:6076
Modules linked in:
CPU: 0 PID: 3612 Comm: syz-executor408 Not tainted 6.1.0-rc3-syzkaller-00175-g1118b204 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:napi_complete_done+0x45b/0x880 net/core/dev.c:6076
Code: c1 ea 03 0f b6 14 02 4c 89 f0 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 24 04 00 00 41 89 5d 1c e9 73 fc ff ff e8 b5 53 22 fa <0f> 0b e9 82 fe ff ff e8 a9 53 22 fa 48 8b 5c 24 08 31 ff 48 89 de
RSP: 0018:ffffc90003c4f920 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000030 RCX: 0000000000000000
RDX: ffff8880251c0000 RSI: ffffffff875a58db RDI: 0000000000000007
RBP: 0000000000000001 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff888072d02628
R13: ffff888072d02618 R14: ffff888072d02634 R15: 0000000000000000
FS: 0000555555f13300(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055c44d3892b8 CR3: 00000000172d2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
napi_complete include/linux/netdevice.h:510 [inline]
tun_get_user+0x206d/0x3a60 drivers/net/tun.c:1980
tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2027
call_write_iter include/linux/fs.h:2191 [inline]
do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735
do_iter_write+0x182/0x700 fs/read_write.c:861
vfs_writev+0x1aa/0x630 fs/read_write.c:934
do_writev+0x133/0x2f0 fs/read_write.c:977
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f37021a3c19

Fixes: 1118b204 ("net: tun: Fix memory leaks of napi_get_frags")
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/20221107180011.188437-1-edumazet@google.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

When prestera_sdma_switch_init() failed, the memory pointed to by
sw->rxtx isn't released. Fix it. Only be compiled, not be tested.

Fixes: 501ef306 ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: NVadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20221108025607.338450-1-shaozhengchao@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

When failed to register irq in xgene_enet_open() for opening device,
napi isn't disabled. When open xgene device next time, it will reports
a invalid opcode issue. Fix it. Only be compiled, not be tested.

Fixes: aeb20b6b ("drivers: net: xgene: fix: ifconfig up/down crash")
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221107043032.357673-1-shaozhengchao@huawei.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>

Current way of checking available SQE count which is based on
HW updated SQB count could result in driver submitting an SQE
even before CQE for the previously transmitted SQE at the same
index is processed in NAPI resulting losing SKB pointers,
hence a leak. Fix this by checking a consumer index which
is updated once CQE is processed.

Fixes: 3ca6c4c8 ("octeontx2-pf: Add packet transmission support")
Signed-off-by: NRatheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: NSunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20221107033505.2491464-1-rkannoth@marvell.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>

When failed to connect to and start PHY in mtk_star_enable() for opening
device, napi isn't disabled. When open mtk star device next time, it will
reports a invalid opcode issue. Fix it. Only be compiled, not be tested.

Fixes: 8c7bd5a4 ("net: ethernet: mtk-star-emac: new driver")
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221107012159.211387-1-shaozhengchao@huawei.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>

If lapb_register() failed when lapb device goes to up for the first time,
the NAPI is not disabled. As a result, the invalid opcode issue is
reported when the lapb device goes to up for the second time.

The stack info is as follows:
[ 1958.311422][T11356] kernel BUG at net/core/dev.c:6442!
[ 1958.312206][T11356] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[ 1958.315979][T11356] RIP: 0010:napi_enable+0x16a/0x1f0
[ 1958.332310][T11356] Call Trace:
[ 1958.332817][T11356]  <TASK>
[ 1958.336135][T11356]  lapbeth_open+0x18/0x90
[ 1958.337446][T11356]  __dev_open+0x258/0x490
[ 1958.341672][T11356]  __dev_change_flags+0x4d4/0x6a0
[ 1958.345325][T11356]  dev_change_flags+0x93/0x160
[ 1958.346027][T11356]  devinet_ioctl+0x1276/0x1bf0
[ 1958.346738][T11356]  inet_ioctl+0x1c8/0x2d0
[ 1958.349638][T11356]  sock_ioctl+0x5d1/0x750
[ 1958.356059][T11356]  __x64_sys_ioctl+0x3ec/0x1790
[ 1958.365594][T11356]  do_syscall_64+0x35/0x80
[ 1958.366239][T11356]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1958.377381][T11356]  </TASK>

Fixes: 514e1150 ("net: x25: Queue received packets in the drivers instead of per-CPU queues")
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221107011445.207372-1-shaozhengchao@huawei.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>

While BCMGENET select BROADCOM_PHY as y, but PTP_1588_CLOCK_OPTIONAL is m,
kconfig warning and build errors:

WARNING: unmet direct dependencies detected for BROADCOM_PHY
  Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
  Selected by [y]:
  - BCMGENET [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && HAS_IOMEM [=y] && ARCH_BCM2835 [=y]

drivers/net/phy/broadcom.o: In function `bcm54xx_suspend':
broadcom.c:(.text+0x6ac): undefined reference to `bcm_ptp_stop'
drivers/net/phy/broadcom.o: In function `bcm54xx_phy_probe':
broadcom.c:(.text+0x784): undefined reference to `bcm_ptp_probe'
drivers/net/phy/broadcom.o: In function `bcm54xx_config_init':
broadcom.c:(.text+0xd4c): undefined reference to `bcm_ptp_config_init'

Fixes: 99addbe3 ("net: broadcom: Select BROADCOM_PHY for BCMGENET")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NFlorian Fainelli <f.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20221105090245.8508-1-yuehaibing@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

If CONFIG_MACSEC=m and CONFIG_OCTEONTX2_PF=y, it leads a build error:

  ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_pfaf_mbox_up_handler':
  otx2_pf.c:(.text+0x181c): undefined reference to `cn10k_handle_mcs_event'
  ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_probe':
  otx2_pf.c:(.text+0x437e): undefined reference to `cn10k_mcs_init'
  ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_remove':
  otx2_pf.c:(.text+0x5031): undefined reference to `cn10k_mcs_free'
  ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_mbox_up_handler_mcs_intr_notify':
  otx2_pf.c:(.text+0x5f11): undefined reference to `cn10k_handle_mcs_event'

Make CONFIG_OCTEONTX2_PF depends on CONFIG_MACSEC to fix it. Because
it has empty stub functions of cn10k, CONFIG_OCTEONTX2_PF can be enabled
if CONFIG_MACSEC is disabled

Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221105063442.2013981-1-yangyingliang@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

There are two problems with meson8b_devm_clk_prepare_enable(),
introduced in commit a54dc4a4 ("net: stmmac: dwmac-meson8b:
Make the clock enabling code re-usable"):

- It doesn't pass the clk argument, but instead always the
  rgmii_tx_clk of the device.

- It silently ignores the return value of devm_add_action_or_reset().

The former didn't become an actual bug until another user showed up in
the next commit 9308c476 ("net: stmmac: dwmac-meson8b: add support
for the RX delay configuration"). The latter means the callers could
end up with the clock not actually prepared/enabled.

Fixes: a54dc4a4 ("net: stmmac: dwmac-meson8b: Make the clock enabling code re-usable")
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221104083004.2212520-1-linux@rasmusvillemoes.dkSigned-off-by: NJakub Kicinski <kuba@kernel.org>

When introducing support for R-Car V3U, which has 8 instead of 2
channels, the ECC error bitmask was extended to take into account the
extra channels, but rcar_canfd_global_error() was not updated to act
upon the extra bits.

Replace the RCANFD_GERFL_EEF[01] macros by a new macro that takes the
channel number, fixing R-Car V3U while simplifying the code.

Fixes: 45721c40 ("can: rcar_canfd: Add support for r8a779a0 SoC")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NBiju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/all/4edb2ea46cc64d0532a08a924179827481e14b4f.1666951503.git.geert+renesas@glider.be
Cc: stable@vger.kernel.org
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

In commit a6d190f8 ("can: skb: drop tx skb if in listen only
mode") the priv->ctrlmode element is read even on virtual CAN
interfaces that do not create the struct can_priv at startup. This
out-of-bounds read may lead to CAN frame drops for virtual CAN
interfaces like vcan and vxcan.

This patch mainly reverts the original commit and adds a new helper
for CAN interface drivers that provide the required information in
struct can_priv.

Fixes: a6d190f8 ("can: skb: drop tx skb if in listen only mode")
Reported-by: NDariusz Stojaczyk <Dariusz.Stojaczyk@opensynergy.com>
Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Cc: Max Staudt <max@enpas.org>
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Acked-by: NVincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221102095431.36831-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org # 6.0.x
[mkl: patch pch_can, too]
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

These WWAN network interface operations (create/delete/open/close)
are already protected by RTNL lock, i.e., wwan_ops.newlink(),
wwan_ops.dellink(), net_device_ops.ndo_open() and
net_device.ndo_stop() are called with RTNL lock held.
Therefore, this patch removes the unnecessary if_mutex.
Signed-off-by: NZhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MHI driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.

This patch sets needs_free_netdev to true when registers
network device, which makes netdev subsystem call free_netdev()
automatically after unregister_netdevice().

Fixes: aa730a99 ("net: wwan: Add MHI MBIM network driver")
Signed-off-by: NHW He <hw.he@mediatek.com>
Signed-off-by: NZhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IOSM driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.

This patch sets needs_free_netdev to true when registers
network device, which makes netdev subsystem call free_netdev()
automatically after unregister_netdevice().

Fixes: 2a54f2c7 ("net: iosm: net driver")
Signed-off-by: NHW He <hw.he@mediatek.com>
Reviewed-by: NLoic Poulain <loic.poulain@linaro.org>
Signed-off-by: NZhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When following tests are performed, it will cause dev reference counting
leakage.
a)ip link add bond2 type bond mode balance-rr
b)ip link set bond2 up
c)ifenslave -f bond2 rose1
d)ip link del bond2

When new bond device is created, the default type of the bond device is
ether. And the bond device is up, bpq_device_event() receives the message
and creates a new bpq device. In this case, the reference count value of
dev is hold once. But after "ifenslave -f bond2 rose1" command is
executed, the type of the bond device is changed to rose. When the bond
device is unregistered, bpq_device_event() will not put the dev reference
count.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When following tests are performed, it will cause dev reference counting
leakage.
a)ip link add bond2 type bond mode balance-rr
b)ip link set bond2 up
c)ifenslave -f bond2 rose1
d)ip link del bond2

When new bond device is created, the default type of the bond device is
ether. And the bond device is up, lapbeth_device_event() receives the
message and creates a new lapbeth device. In this case, the reference
count value of dev is hold once. But after "ifenslave -f bond2 rose1"
command is executed, the type of the bond device is changed to rose. When
the bond device is unregistered, lapbeth_device_event() will not put the
dev reference count.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the mac device gets removed, it leaves behind the ethernet device.
This will result in a segfault next time the ethernet device accesses
mac_dev. Remove the ethernet device when we get removed to prevent
this. This is not completely reversible, since some resources aren't
cleaned up properly, but that can be addressed later.

Fixes: 39339616 ("fsl/fman: Add FMan MAC driver")
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20221103182831.2248833-1-sean.anderson@seco.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

In the bnxt_en driver ndo_rx_flow_steer returns '0' whenever an entry
that we are attempting to steer is already found.  This is not the
correct behavior.  The return code should be the value/index that
corresponds to the entry.  Returning zero all the time causes the
RFS records to be incorrect unless entry '0' is the correct one.  As
flows migrate to different cores this can create entries that are not
correct.

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Reported-by: NAkshay Navgire <anavgire@purestorage.com>
Signed-off-by: NAlex Barba <alex.barba@broadcom.com>
Signed-off-by: NAndy Gospodarek <gospo@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

During the error recovery sequence, the rtnl_lock is not held for the
entire duration and some datastructures may be freed during the sequence.
Check for the BNXT_STATE_OPEN flag instead of netif_running() to ensure
that the device is fully operational before proceeding to reconfigure
the coalescing settings.

This will fix a possible crash like this:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 10 PID: 181276 Comm: ethtool Kdump: loaded Tainted: G          IOE    --------- -  - 4.18.0-348.el8.x86_64 #1
Hardware name: Dell Inc. PowerEdge R740/0F9N89, BIOS 2.3.10 08/15/2019
RIP: 0010:bnxt_hwrm_set_coal+0x1fb/0x2a0 [bnxt_en]
Code: c2 66 83 4e 22 08 66 89 46 1c e8 10 cb 00 00 41 83 c6 01 44 39 b3 68 01 00 00 0f 8e a3 00 00 00 48 8b 93 c8 00 00 00 49 63 c6 <48> 8b 2c c2 48 8b 85 b8 02 00 00 48 85 c0 74 2e 48 8b 74 24 08 f6
RSP: 0018:ffffb11c8dcaba50 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8d168a8b0ac0 RCX: 00000000000000c5
RDX: 0000000000000000 RSI: ffff8d162f72c000 RDI: ffff8d168a8b0b28
RBP: 0000000000000000 R08: b6e1f68a12e9a7eb R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000037 R12: ffff8d168a8b109c
R13: ffff8d168a8b10aa R14: 0000000000000000 R15: ffffffffc01ac4e0
FS:  00007f3852e4c740(0000) GS:ffff8d24c0080000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000041b3ee003 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 ethnl_set_coalesce+0x3ce/0x4c0
 genl_family_rcv_msg_doit.isra.15+0x10f/0x150
 genl_family_rcv_msg+0xb3/0x160
 ? coalesce_fill_reply+0x480/0x480
 genl_rcv_msg+0x47/0x90
 ? genl_family_rcv_msg+0x160/0x160
 netlink_rcv_skb+0x4c/0x120
 genl_rcv+0x24/0x40
 netlink_unicast+0x196/0x230
 netlink_sendmsg+0x204/0x3d0
 sock_sendmsg+0x4c/0x50
 __sys_sendto+0xee/0x160
 ? syscall_trace_enter+0x1d3/0x2c0
 ? __audit_syscall_exit+0x249/0x2a0
 __x64_sys_sendto+0x24/0x30
 do_syscall_64+0x5b/0x1a0
 entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f38524163bb

Fixes: 2151fe08 ("bnxt_en: Handle RESET_NOTIFY async event from firmware.")
Reviewed-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Fix the sequence required for PCIE-AER. While slot reset occurs, firmware
might not be ready and the driver needs to check for its recovery.  We
also need to remap the health registers for some chips and clear the
resource reservations.  The resources will be allocated again during
bnxt_io_resume().

Fixes: fb1e6e56 ("bnxt_en: Fix AER recovery.")
Signed-off-by: NVikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Introduce bnxt_clear_reservations() to clear the reserved attributes only.
This will be used in the next patch to fix PCI AER handling.
Signed-off-by: NVikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>