DEBUG_VIRTUAL should only used when MMU enabled, add the dependence.
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>

ARCH_HAS_STRICT_KERNEL_RWX is not useful for NO-MMU systems.
Furthermore, has this option leads to very large boot image files on
64bits architectures, do not enable this option to allow supporting
no-mmu platforms such as the Kendryte K210 SoC based boards.

Fixes: 00cb41d5 ("riscv: add alignment for text, rodata and data sections")
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NAnup Patel <anup@brainfault.org>
Reviewed-by: NWladimir J. van der Laan <laanwj@gmail.com>
Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>

The BPF JIT fails to build for kernels configured to !MMU. Without an
MMU, the BPF JIT does not make much sense, therefore this patch
disables the JIT for nommu builds.

This was reported by the kbuild test robot:

   All errors (new ones prefixed by >>):

      arch/riscv/net/bpf_jit_comp64.c: In function 'bpf_jit_alloc_exec':
   >> arch/riscv/net/bpf_jit_comp64.c:1094:47: error: 'BPF_JIT_REGION_START' undeclared (first use in this function)
       1094 |  return __vmalloc_node_range(size, PAGE_SIZE, BPF_JIT_REGION_START,
            |                                               ^~~~~~~~~~~~~~~~~~~~
      arch/riscv/net/bpf_jit_comp64.c:1094:47: note: each undeclared identifier is reported only once for each function it appears in
   >> arch/riscv/net/bpf_jit_comp64.c:1095:9: error: 'BPF_JIT_REGION_END' undeclared (first use in this function)
       1095 |         BPF_JIT_REGION_END, GFP_KERNEL,
            |         ^~~~~~~~~~~~~~~~~~
      arch/riscv/net/bpf_jit_comp64.c:1098:1: warning: control reaches end of non-void function [-Wreturn-type]
       1098 | }
            | ^
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NBjörn Töpel <bjorn.topel@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NLuke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20200331101046.23252-1-bjorn.topel@gmail.com

This patch enable support for cpu hotplug in RISC-V. It uses SBI HSM
extension to online/offline any hart. As a result, the harts are
returned to firmware once they are offline. If the harts are brought
online afterwards, they re-enter Linux kernel as if a secondary hart
booted for the first time. All booting requirements are honored during
this process.

Tested both on QEMU and HighFive Unleashed board with. Test result follows.

---------------------------------------------------
Offline cpu 2
---------------------------------------------------
$ echo 0 > /sys/devices/system/cpu/cpu2/online
[   32.828684] CPU2: off
$ cat /proc/cpuinfo
processor       : 0
hart            : 0
isa             : rv64imafdcsu
mmu             : sv48

processor       : 1
hart            : 1
isa             : rv64imafdcsu
mmu             : sv48

processor       : 3
hart            : 3
isa             : rv64imafdcsu
mmu             : sv48

processor       : 4
hart            : 4
isa             : rv64imafdcsu
mmu             : sv48

processor       : 5
hart            : 5
isa             : rv64imafdcsu
mmu             : sv48

processor       : 6
hart            : 6
isa             : rv64imafdcsu
mmu             : sv48

processor       : 7
hart            : 7
isa             : rv64imafdcsu
mmu             : sv48

---------------------------------------------------
online cpu 2
---------------------------------------------------
$ echo 1 > /sys/devices/system/cpu/cpu2/online
$ cat /proc/cpuinfo
processor       : 0
hart            : 0
isa             : rv64imafdcsu
mmu             : sv48

processor       : 1
hart            : 1
isa             : rv64imafdcsu
mmu             : sv48

processor       : 2
hart            : 2
isa             : rv64imafdcsu
mmu             : sv48

processor       : 3
hart            : 3
isa             : rv64imafdcsu
mmu             : sv48

processor       : 4
hart            : 4
isa             : rv64imafdcsu
mmu             : sv48

processor       : 5
hart            : 5
isa             : rv64imafdcsu
mmu             : sv48

processor       : 6
hart            : 6
isa             : rv64imafdcsu
mmu             : sv48

processor       : 7
hart            : 7
isa             : rv64imafdcsu
mmu             : sv48
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Reviewed-by: NAnup Patel <anup@brainfault.org>

We now have SBI v0.2 which is more scalable and extendable to handle
future needs for RISC-V supervisor interfaces.

Introduce a new config and move all SBI v0.1 code under that config.
This allows to implement the new replacement SBI extensions cleanly
and remove v0.1 extensions easily in future. Currently, the config
is enabled by default. Once all M-mode software, with v0.1, is no
longer in use, this config option and all relevant code can be easily
removed.
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Reviewed-by: NAnup Patel <anup@brainfault.org>
Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>

In a similar manner to arm64, x86, powerpc, etc., it can traverse all
page tables, and dump the page table layout with the memory types and
permissions.

Add a debugfs file at /sys/kernel/debug/kernel_page_tables to export
the page table layout to userspace.
Signed-off-by: NZong Li <zong.li@sifive.com>
Tested-by: NAlexandre Ghiti <alex@ghiti.fr>
Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>

The commit contains that make text section as non-writable, rodata
section as read-only, and data section as non-executable.

The init section should be changed to non-executable.
Signed-off-by: NZong Li <zong.li@sifive.com>
Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>

ARCH_SUPPORTS_DEBUG_PAGEALLOC provides a hook to map and unmap
pages for debugging purposes. Implement the __kernel_map_pages
functions to fill the poison pattern.
Signed-off-by: NZong Li <zong.li@sifive.com>
Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>

Add set_direct_map_*() functions for setting the direct map alias for
the page to its default permissions and to an invalid state that cannot
be cached in a TLB. (See d253ca0c ("x86/mm/cpa: Add set_direct_map_*()
functions")) Add a similar implementation for RISC-V.
Signed-off-by: NZong Li <zong.li@sifive.com>
Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>

Add set_memory_ro/rw/x/nx architecture hooks to change the page
attribution.

Use own set_memory.h rather than generic set_memory.h
(i.e. include/asm-generic/set_memory.h), because we want to add other
function prototypes here.
Signed-off-by: NZong Li <zong.li@sifive.com>
Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>

It might have the unaligned access exception when trying to exchange data
with user space program. In this case, it failed in tty_ioctl(). Therefore
we should enable uaccess.S for NOMMU mode since the generic code doesn't
handle the unaligned access cases.

   0x8013a212 <tty_ioctl+462>:  ld      a5,460(s1)

[    0.115279] Oops - load address misaligned [#1]
[    0.115284] CPU: 0 PID: 29 Comm: sh Not tainted 5.4.0-rc5-00020-gb4c27160d562-dirty #36
[    0.115294] epc: 000000008013a212 ra : 000000008013a212 sp : 000000008f48dd50
[    0.115303]  gp : 00000000801cac28 tp : 000000008fb80000 t0 : 00000000000000e8
[    0.115312]  t1 : 000000008f58f108 t2 : 0000000000000009 s0 : 000000008f48ddf0
[    0.115321]  s1 : 000000008f8c6220 a0 : 0000000000000001 a1 : 000000008f48dd28
[    0.115330]  a2 : 000000008fb80000 a3 : 00000000801a7398 a4 : 0000000000000000
[    0.115339]  a5 : 0000000000000000 a6 : 000000008f58f0c6 a7 : 000000000000001d
[    0.115348]  s2 : 000000008f8c6308 s3 : 000000008f78b7c8 s4 : 000000008fb834c0
[    0.115357]  s5 : 0000000000005413 s6 : 0000000000000000 s7 : 000000008f58f2b0
[    0.115366]  s8 : 000000008f858008 s9 : 000000008f776818 s10: 000000008f776830
[    0.115375]  s11: 000000008fb840a8 t3 : 1999999999999999 t4 : 000000008f78704c
[    0.115384]  t5 : 0000000000000005 t6 : 0000000000000002
[    0.115391] status: 0000000200001880 badaddr: 000000008f8c63ec cause: 0000000000000004
[    0.115401] ---[ end trace 00d490c6a8b6c9ac ]---

This failure could be fixed after this patch applied.

[    0.002282] Run /init as init process
Initializing random number generator... [    0.005573] random: dd: uninitialized urandom read (512 bytes read)
done.

Welcome to Buildroot
buildroot login: root
Password:
Jan  1 00:00:00 login[62]: root login on 'ttySIF0'
~ #
Signed-off-by: NGreentime Hu <greentime.hu@sifive.com>
Reviewed-by: NPalmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This is an eBPF JIT for RV32G, adapted from the JIT for RV64G and
the 32-bit ARM JIT.

There are two main changes required for this to work compared to
the RV64 JIT.

First, eBPF registers are 64-bit, while RV32G registers are 32-bit.
BPF registers either map directly to 2 RISC-V registers, or reside
in stack scratch space and are saved and restored when used.

Second, many 64-bit ALU operations do not trivially map to 32-bit
operations. Operations that move bits between high and low words,
such as ADD, LSH, MUL, and others must emulate the 64-bit behavior
in terms of 32-bit instructions.

This patch also makes related changes to bpf_jit.h, such
as adding RISC-V instructions required by the RV32 JIT.

Supported features:

The RV32 JIT supports the same features and instructions as the
RV64 JIT, with the following exceptions:

- ALU64 DIV/MOD: Requires loops to implement on 32-bit hardware.

- BPF_XADD | BPF_DW: There's no 8-byte atomic instruction in RV32.

These features are also unsupported on other BPF JITs for 32-bit
architectures.

Testing:

- lib/test_bpf.c
test_bpf: Summary: 378 PASSED, 0 FAILED, [349/366 JIT'ed]
test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED

The tests that are not JITed are all due to use of 64-bit div/mod
or 64-bit xadd.

- tools/testing/selftests/bpf/test_verifier.c
Summary: 1415 PASSED, 122 SKIPPED, 43 FAILED

Tested both with and without BPF JIT hardening.

This is the same set of tests that pass using the BPF interpreter
with the JIT disabled.

Verification and synthesis:

We developed the RV32 JIT using our automated verification tool,
Serval. We have used Serval in the past to verify patches to the
RV64 JIT. We also used Serval to superoptimize the resulting code
through program synthesis.

You can find the tool and a guide to the approach and results here:
https://github.com/uw-unsat/serval-bpf/tree/rv32-jit-v5Co-developed-by: NXi Wang <xi.wang@gmail.com>
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Signed-off-by: NLuke Nelson <luke.r.nels@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NBjörn Töpel <bjorn.topel@gmail.com>
Acked-by: NBjörn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20200305050207.4159-3-luke.r.nels@gmail.com

Compilation errors trigger if ARCH_SPARSEMEM_ENABLE is enabled for
a nommu kernel. Since the sparsemem model does not make sense anyway
for the nommu case, do not allow selecting this option to always use
the flatmem model.
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NAnup Patel <anup@brainfault.org>
Reviewed-by: NPalmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch implements CONFIG_DEBUG_VIRTUAL to do additional checks on
virt_to_phys and __pa_symbol calls. virt_to_phys used for linear mapping
check, and __pa_symbol used for kernel symbol check. In current RISC-V,
kernel image maps to linear mapping area. If CONFIG_DEBUG_VIRTUAL is
disable, these two functions calculate the offset on the address feded
directly without any checks.

The result of test_debug_virtual as follows:

[    0.358456] ------------[ cut here ]------------
[    0.358738] virt_to_phys used for non-linear address: (____ptrval____) (0xffffffd000000000)
[    0.359174] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:16 __virt_to_phys+0x3c/0x50
[    0.359409] Modules linked in:
[    0.359630] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc3-00002-g5133c5c0ca13 #57
[    0.359861] epc: ffffffe000253d1a ra : ffffffe000253d1a sp : ffffffe03aa87da0
[    0.360019]  gp : ffffffe000ae03b0 tp : ffffffe03aa88000 t0 : ffffffe000af2660
[    0.360175]  t1 : 0000000000000064 t2 : 00000000000000b7 s0 : ffffffe03aa87dc0
[    0.360330]  s1 : ffffffd000000000 a0 : 000000000000004f a1 : 0000000000000000
[    0.360492]  a2 : 0000000000000000 a3 : 0000000000000000 a4 : ffffffe000a84358
[    0.360672]  a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000
[    0.360876]  s2 : ffffffe000ae0600 s3 : ffffffe00000fc7c s4 : ffffffe0000224b0
[    0.361067]  s5 : ffffffe000030890 s6 : ffffffe000022470 s7 : 0000000000000008
[    0.361267]  s8 : ffffffe0000002c4 s9 : ffffffe000ae0640 s10: ffffffe000ae0630
[    0.361453]  s11: 0000000000000000 t3 : 0000000000000000 t4 : 000000000001e6d0
[    0.361636]  t5 : ffffffe000ae0a18 t6 : ffffffe000aee54e
[    0.361806] status: 0000000000000120 badaddr: 0000000000000000 cause: 0000000000000003
[    0.362056] ---[ end trace aec0bf78d4978122 ]---
[    0.362404] PA: 0xfffffff080200000 for VA: 0xffffffd000000000
[    0.362607] PA: 0x00000000baddd2d0 for VA: 0xffffffe03abdd2d0
Signed-off-by: NZong Li <zong.li@sifive.com>
Reviewed-by: NPaul Walmsley <paul.walmsley@sifive.com>
Tested-by: NPaul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>

While rv32 technically has 34-bit physical addresses, no current platforms
use it and it's likely to shake out driver bugs.

Let's keep 64-bit phys_addr_t off on 32-bit builds until one shows up,
since other work will be needed to make such a system useful anyway.

PHYS_ADDR_T_64BIT is def_bool 64BIT, so just remove the select.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch ports the feature Kernel Address SANitizer (KASAN).

Note: The start address of shadow memory is at the beginning of kernel
space, which is 2^64 - (2^39 / 2) in SV39. The size of the kernel space is
2^38 bytes so the size of shadow memory should be 2^38 / 8. Thus, the
shadow memory would not overlap with the fixmap area.

There are currently two limitations in this port,

1. RV64 only: KASAN need large address space for extra shadow memory
region.

2. KASAN can't debug the modules since the modules are allocated in VMALLOC
area. We mapped the shadow memory, which corresponding to VMALLOC area, to
the kasan_early_shadow_page because we don't have enough physical space for
all the shadow memory corresponding to VMALLOC area.
Signed-off-by: NNick Hu <nickhu@andestech.com>
Reported-by: NGreentime Hu <green.hu@gmail.com>
Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This is required for clone3 which passes the TLS value through a
struct rather than a register.
Signed-off-by: NAmanieu d'Antras <amanieu@gmail.com>
Cc: linux-riscv@lists.infradead.org
Cc: <stable@vger.kernel.org> # 5.3.x
Link: https://lore.kernel.org/r/20200102172413.654385-6-amanieu@gmail.comSigned-off-by: NChristian Brauner <christian.brauner@ubuntu.com>

This patch enables GCOV code coverage measurement on RISC-V.
Lightly tested on QEMU and Hifive Unleashed board, seems to work as
expected.
Signed-off-by: NZong Li <zong.li@sifive.com>
Reviewed-by: NAnup Patel <anup@brainfault.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com>

In Kconfig files, config options are written without the CONFIG_ prefix.

Fixes: 6bd33e1e ("riscv: add nommu support")
Signed-off-by: NAndreas Schwab <schwab@suse.de>
Reviewed-by: NAnup Patel <anup@brainfault.org>
Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com>

The kernel runs in M-mode without using page tables, and thus can't run
bare metal without help from additional firmware.

Most of the patch is just stubbing out code not needed without page
tables, but there is an interesting detail in the signals implementation:

 - The normal RISC-V syscall ABI only implements rt_sigreturn as VDSO
   entry point, but the ELF VDSO is not supported for nommu Linux.
   We instead copy the code to call the syscall onto the stack.

In addition to enabling the nommu code a new defconfig for a small
kernel image that can run in nommu mode on qemu is also provided, to run
a kernel in qemu you can use the following command line:

qemu-system-riscv64 -smp 2 -m 64 -machine virt -nographic \
	-kernel arch/riscv/boot/loader \
	-drive file=rootfs.ext2,format=raw,id=hd0 \
	-device virtio-blk-device,drive=hd0

Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com>.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAnup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: updated to apply; add CONFIG_MMU guards
 around PCI_IOBASE definition to fix build issues; fixed checkpatch
 issues; move the PCI_IO_* and VMEMMAP address space macros along
 with the others; resolve sparse warning]
Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com>

In order to use 128-bit integer arithmetic in C code, the architecture
needs to have declared support for it by setting ARCH_SUPPORTS_INT128,
and it requires a version of the toolchain that supports this at build
time. This is why all existing tests for ARCH_SUPPORTS_INT128 also test
whether __SIZEOF_INT128__ is defined, since this is only the case for
compilers that can support 128-bit integers.

Let's fold this additional test into the Kconfig declaration of
ARCH_SUPPORTS_INT128 so that we can also use the symbol in Makefiles,
e.g., to decide whether a certain object needs to be included in the
first place.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When running in M-mode we can't use SBI based drivers.  Add a new
CONFIG_RISCV_SBI that drivers that do SBI calls can depend on
instead.
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NAnup Patel <anup@brainfault.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com>

Use the generic ioremap code instead of providing a local version.
Note that this relies on the asm-generic no-op definition of
pgprot_noncached.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NPaul Walmsley <paul.walmsley@sifive.com>
Tested-by: Paul Walmsley <paul.walmsley@sifive.com> # rv32, rv64 boot
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # arch/riscv

Many of the privileged CSRs exist in a supervisor and machine version
that are used very similarly.  Provide versions of the CSR names and
fields that map to either the S-mode or M-mode variant depending on
a new CONFIG_RISCV_M_MODE kconfig symbol.

Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com>
and Paul Walmsley <paul.walmsley@sifive.com>.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de> # for drivers/clocksource, drivers/irqchip
[paul.walmsley@sifive.com: updated to apply]
Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com>

This patch was extensively tested on Fedora/RISCV (applied by default on
top of 5.2-rc7 kernel for <2 months). The patch was also tested with 5.3-rc
on QEMU and SiFive Unleashed board.

libseccomp (userspace) was rebased:
https://github.com/seccomp/libseccomp/pull/134

Fully passes libseccomp regression testing (simulation and live).

There is one failing kernel selftest: global.user_notification_signal

v1 -> v2:
  - return immediately if secure_computing(NULL) returns -1
  - fixed whitespace issues
  - add missing seccomp.h
  - remove patch #2 (solved now)
  - add riscv to seccomp kernel selftest
Signed-off-by: NDavid Abdurachmanov <david.abdurachmanov@sifive.com>
Cc: keescook@chromium.org
Cc: me@carlosedp.com
Tested-by: NCarlos de Paula <me@carlosedp.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/linux-riscv/CAEn-LTp=ss0Dfv6J00=rCAy+N78U2AmhqJNjfqjr2FDpPYjxEQ@mail.gmail.com/
Link: https://lore.kernel.org/linux-riscv/CAJr-aD=UnCN9E_mdVJ2H5nt=6juRSWikZnA5HxDLQxXLbsRz-w@mail.gmail.com/
[paul.walmsley@sifive.com: cleaned up Cc: lines; fixed spelling and
 checkpatch issues; updated to apply]
Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com>

In order to avoid wasting user address space by using bottom-up mmap
allocation scheme, prefer top-down scheme when possible.

Before:
root@qemuriscv64:~# cat /proc/self/maps
00010000-00016000 r-xp 00000000 fe:00 6389       /bin/cat.coreutils
00016000-00017000 r--p 00005000 fe:00 6389       /bin/cat.coreutils
00017000-00018000 rw-p 00006000 fe:00 6389       /bin/cat.coreutils
00018000-00039000 rw-p 00000000 00:00 0          [heap]
1555556000-155556d000 r-xp 00000000 fe:00 7193   /lib/ld-2.28.so
155556d000-155556e000 r--p 00016000 fe:00 7193   /lib/ld-2.28.so
155556e000-155556f000 rw-p 00017000 fe:00 7193   /lib/ld-2.28.so
155556f000-1555570000 rw-p 00000000 00:00 0
1555570000-1555572000 r-xp 00000000 00:00 0      [vdso]
1555574000-1555576000 rw-p 00000000 00:00 0
1555576000-1555674000 r-xp 00000000 fe:00 7187   /lib/libc-2.28.so
1555674000-1555678000 r--p 000fd000 fe:00 7187   /lib/libc-2.28.so
1555678000-155567a000 rw-p 00101000 fe:00 7187   /lib/libc-2.28.so
155567a000-15556a0000 rw-p 00000000 00:00 0
3fffb90000-3fffbb1000 rw-p 00000000 00:00 0      [stack]

After:
root@qemuriscv64:~# cat /proc/self/maps
00010000-00016000 r-xp 00000000 fe:00 6389       /bin/cat.coreutils
00016000-00017000 r--p 00005000 fe:00 6389       /bin/cat.coreutils
00017000-00018000 rw-p 00006000 fe:00 6389       /bin/cat.coreutils
2de81000-2dea2000 rw-p 00000000 00:00 0          [heap]
3ff7eb6000-3ff7ed8000 rw-p 00000000 00:00 0
3ff7ed8000-3ff7fd6000 r-xp 00000000 fe:00 7187   /lib/libc-2.28.so
3ff7fd6000-3ff7fda000 r--p 000fd000 fe:00 7187   /lib/libc-2.28.so
3ff7fda000-3ff7fdc000 rw-p 00101000 fe:00 7187   /lib/libc-2.28.so
3ff7fdc000-3ff7fe2000 rw-p 00000000 00:00 0
3ff7fe4000-3ff7fe6000 r-xp 00000000 00:00 0      [vdso]
3ff7fe6000-3ff7ffd000 r-xp 00000000 fe:00 7193   /lib/ld-2.28.so
3ff7ffd000-3ff7ffe000 r--p 00016000 fe:00 7193   /lib/ld-2.28.so
3ff7ffe000-3ff7fff000 rw-p 00017000 fe:00 7193   /lib/ld-2.28.so
3ff7fff000-3ff8000000 rw-p 00000000 00:00 0
3fff888000-3fff8a9000 rw-p 00000000 00:00 0      [stack]

[alex@ghiti.fr: v6]
  Link: http://lkml.kernel.org/r/20190808061756.19712-15-alex@ghiti.fr
Link: http://lkml.kernel.org/r/20190730055113.23635-15-alex@ghiti.frSigned-off-by: NAlexandre Ghiti <alex@ghiti.fr>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NLuis Chamberlain <mcgrof@kernel.org>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com>	[arch/riscv]
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch implements the perf registers sampling and validation API
for the riscv arch. The valid registers and their register ID are
defined in perf_regs.h. Perf tool can backtrace in userspace with
unwind library and the registers/user stack dump support.
Signed-off-by: NMao Han <han_mao@c-sky.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: linux-riscv <linux-riscv@lists.infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Guo Ren <guoren@kernel.org>
Tested-by: NGreentime Hu <greentime.hu@sifive.com>
[paul.walmsley@sifive.com: minor patch description fix]
Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com>

Implement sparsemem support for Risc-v which helps pave the
way for memory hotplug and eventually P2P support.

Introduce Kconfig options for virtual and physical address bits which
are used to calculate the size of the vmemmap and set the
MAX_PHYSMEM_BITS.

The vmemmap is located directly before the VMALLOC region and sized
such that we can allocate enough pages to populate all the virtual
address space in the system (similar to the way it's done in arm64).

During initialization, call memblocks_present() and sparse_init(),
and provide a stub for vmemmap_populate() (all of which is similar to
arm64).

[greentime.hu@sifive.com: fixed pfn_valid, FIXADDR_TOP and fixed a bug
 rebasing onto v5.3]
Signed-off-by: NGreentime Hu <greentime.hu@sifive.com>
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NPalmer Dabbelt <palmer@sifive.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andrew Waterman <andrew@sifive.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Michael Clark <michaeljclark@mac.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Zong Li <zong@andestech.com>
Reviewed-by: NMike Rapoport <rppt@linux.ibm.com>
[paul.walmsley@sifive.com: updated to apply; minor commit message
 reformat]
Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com>

Add CONFIG_ASM_MODVERSIONS. This allows to remove one if-conditional
nesting in scripts/Makefile.build.

scripts/Makefile.build is run every time Kbuild descends into a
sub-directory. So, I want to avoid $(wildcard ...) evaluation
where possible although computing $(wildcard ...) is so cheap that
it may not make measurable performance difference.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Currently, there are no topology defined for RISC-V.
Parse the cpu-map node from device tree and setup the
cpu topology.

CPU topology after applying the patch.
$cat /sys/devices/system/cpu/cpu2/topology/core_siblings_list
0-3
$cat /sys/devices/system/cpu/cpu3/topology/core_siblings_list
0-3
$cat /sys/devices/system/cpu/cpu3/topology/physical_package_id
0
$cat /sys/devices/system/cpu/cpu3/topology/core_id
3
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Acked-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com>

This patch implements both 4MB huge page support for 32bit kernel
and 2MB/1GB huge pages support for 64bit kernel.
Signed-off-by: NAlexandre Ghiti <alex@ghiti.fr>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com>

Create a config option for building SiFive SoC specific resources
e.g. SiFive device tree, platform drivers...
Signed-off-by: NLoys Ollivier <lollivier@baylibre.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: NPalmer Dabbelt <palmer@sifive.com>
Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com>

Just use the generic definitions.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NGreg Ungerer <gerg@linux-m68k.org>

Add an EDAC driver for SiFive SoCs. The initial version supports ECC
event monitoring and reporting through the EDAC framework for the SiFive
L2 cache controller. It registers for notifier events from the L2 cache
controller driver (arch/riscv/mm/sifive_l2_cache.c) for L2 ECC events.

 [ bp: Massage commit message. ]
Signed-off-by: NYash Shah <yash.shah@sifive.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NJames Morse <james.morse@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-riscv@lists.infradead.org
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: sachin.ghadi@sifive.com
Link: https://lkml.kernel.org/r/1557142026-15949-2-git-send-email-yash.shah@sifive.com

The kbuild documentation clearly shows that the documents
there are written at different times: some use markdown,
some use their own peculiar logic to split sections.

Convert everything to ReST without affecting too much
the author's style and avoiding adding uneeded markups.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This option is always enabled, and not supporting the A extensions would
create a complete ABI trainwreck, so there is no point in even slightly
encouraging such an idea by keeping this unselectable code around.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>

In a bid to kill off explicit mmiowb() usage in driver code, hook up
the asm-generic mmiowb() tracking code for riscv, so that an mmiowb()
is automatically issued from spin_unlock() if an I/O write was performed
in the critical section.
Reviewed-by: NPalmer Dabbelt <palmer@sifive.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Currently, we have two different implementation of rwsem:

 1) CONFIG_RWSEM_GENERIC_SPINLOCK (rwsem-spinlock.c)
 2) CONFIG_RWSEM_XCHGADD_ALGORITHM (rwsem-xadd.c)

As we are going to use a single generic implementation for rwsem-xadd.c
and no architecture-specific code will be needed, there is no point
in keeping two different implementations of rwsem. In most cases, the
performance of rwsem-spinlock.c will be worse. It also doesn't get all
the performance tuning and optimizations that had been implemented in
rwsem-xadd.c over the years.

For simplication, we are going to remove rwsem-spinlock.c and make all
architectures use a single implementation of rwsem - rwsem-xadd.c.

All references to RWSEM_GENERIC_SPINLOCK and RWSEM_XCHGADD_ALGORITHM
in the code are removed.
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NWaiman Long <longman@redhat.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-um@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: nios2-dev@lists.rocketboards.org
Cc: openrisc@lists.librecores.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Link: https://lkml.kernel.org/r/20190322143008.21313-3-longman@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

We don't yet have an upstream glibc port for riscv, so there is no user
space for the existing ABI, and we can remove the definitions for 32-bit
time_t, off_t and struct resource and system calls based on them,
including the vdso.
Reviewed-by: NPalmer Dabbelt <palmer@sifive.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>