Need to disable dpm features before halt rlc.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

So we can query what features are enabled for debugging.
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

So we can query what features are enabled for debugging.
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

So we can query what features are enabled for debugging.
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For consistency with other asics.
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For consistency with other asics.
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

to vega10_smumgr.c.  For consistency with other vega parts.
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For consistency with other vega parts.
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Honour display's request for min engine clock/memory clock.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With OD settings applied, the clock table will be updated accordingly.
We need to retrieve the new clock tables then.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With the latest SMC fw, we are able to get the voltage value for
specific frequency point. So, we update the OD relates to take
absolute voltage instead of offset.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update the conditions to judge whether an OD feature
should be supported on vega20.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Treat them all as Raven rather than adding a new picasso
asic type.  This simplifies a lot of code and also handles the
case of rv2 chips with the 0x15d8 pci id.  It also fixes dmcu
fw handling for picasso.
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's not supported yet.

v2: rebase (Alex)
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since the clock value there may be like 29999 10Khz.

v2: rebase (Alex)
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add powerplay support for picasso, treat it the same as raven now.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

do_div expects the 1st argument in 64bit instead of 32bit.
Drop the usage of do_div as it seems unnecessary.

V2: drop usage of do_div completely
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Added vega20 overdrive support based on existing OD sysfs
APIs. However, the OD logics are simplified on vega20. So,
the behavior will be a little different and works only on
some limited levels.

V2: fix typo
    fix commit description
    revise error logs
    add support for clock OD

V3: separate clock from voltage OD settings
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Also ajust the gfx domain voltage on Tonga when user overdriver
the voltage.

For Tonga, Driver do not update user's setting to voltage table
in smu, we only pick up a minimum value from voltage table that
not less than the user's setting.

v2: fix a typo
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Run AFLL BTC after upload pptable and before enabling
all smu features.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The latest SMU fw removes the limitation that required
UCLK >= DCEFCLK.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise there may be potential SMU performance issues.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The argument was set wrongly. Fast/slow switch was asked when there is
actually a slow/fast switch needed.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For vega20, there are two UVD rings which share one powerplay instance.
Under some case(two rings used parallel), the uvd dpm is disabled twice
which causes the SMC hang.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <rezhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SOC voltage is not able to switch and forced to low 0.8V when running HEVC.
Thus the test failed.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <rezhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set fclk ss as enabled on default.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <rezhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

UVD, VCE and SOC clocks need to be taken into consideration. Also, the
thresholds need be updated correspondingly when stable power state is selected.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

UVD, VCE and Socclk also need to be taken into consideration when
setting PPSMC_MSG_SetSoftMinByFreq and PPSMC_MSG_SetSoftMaxByFreq.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add support for the new SMU firmware interface for clock adjustment.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The initialized overdrive settings are taken from vbios and SMU(
by PPSMC_MSG_TransferTableSmu2Dram).
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Powerplay uses 10KHz units.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

fix possible handshake hang and video playback crash

Corner cases:
 - Handshake between SMU and DCE causes hangs when CRTC is not
   enabled
 - System crash occurs when starting 4K playback with Movies and TV
   in an SLS configuration
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Needed for querying the stable pstate clocks.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. The min/max level is determined by soft_min_level/soft_max_level.
2. Vega20 comes with pptable v3 which has no vdd related
table(vdd_dep_on_socclk, vdd_dep_on_mclk) support.
3. Vega20 does not support separate fan feature control(enable or
disable).

v2: squash in fixes:
- bug fix for force dpm level settings
- fix wrong data type
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is essentially necessary when uvd/vce dpm is not enabled yet.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support the power profile API.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

hwmgr is the interface for the driver to setup state
structures which are used by the smu for managing the
power state.

v2: squash in fixes:
- update set_watermarks_for_clocks_ranges to use common code
- drop unsupported apis
- correct MAX_REGULAR_DPM_NUMBER value
- multimonitor fixes
- add check for vbios pptable version
- revise dpm table setup
- init fclk dpm state
- Remove unused definition in vega20_hwmgr
- support power limit setup
- enable vega20 to honour DAL clock limits
- comment out dump_table debugging
v3: switch to SOC15 register access macros
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: squash in table size fixes
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: use thm 11.0.2 headers
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allow the user to disable AFVS via ppfeaturemask for debugging.
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>