- 25 2月, 2011 1 次提交
-
-
由 David Rientjes 提交于
numa_distance should be sized like the SLIT, an NxN matrix where N is the highest node id + 1. This patch fixes the calculation to avoid overflowing the array on the subsequent iteration. -tj: The original patch used last index to calculate size. Yinghai pointed out it should be incremented so it is the number of elements instead of the last index to calculate the size of the table. Updated accordingly. Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 24 2月, 2011 4 次提交
-
-
由 Yinghai Lu 提交于
e820_table_{start|end|top}, which are used to buffer page table allocation during early boot, are now derived from memblock and don't have much to do with e820. Change the names so that they reflect what they're used for. This patch doesn't introduce any behavior change. -v2: Ingo found that earlier patch "x86: Use early pre-allocated page table buffer top-down" caused crash on 32bit and needed to be dropped. This patch was updated to reflect the change. -tj: Updated commit description. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Yinghai Lu 提交于
Now that bootmem.c and nobootmem.c are separate, there's no reason to define __alloc_memory_core_early(), which is used only by nobootmem, inside #ifdef in page_alloc.c. Move it to nobootmem.c and make it static. This patch doesn't introduce any behavior change. -tj: Updated commit description. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Acked-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Yinghai Lu 提交于
Now that bootmem.c and nobootmem.c are separate, it's cleaner to define contig_page_data in each file than in page_alloc.c with #ifdef. Move it. This patch doesn't introduce any behavior change. -v2: According to Andrew, fixed the struct layout. -tj: Updated commit description. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Acked-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Yinghai Lu 提交于
mm/bootmem.c contained code paths for both bootmem and no bootmem configurations. They implement about the same set of APIs in different ways and as a result bootmem.c contains massive amount of #ifdef CONFIG_NO_BOOTMEM. Separate out CONFIG_NO_BOOTMEM code into mm/nobootmem.c. As the common part is relatively small, duplicate them in nobootmem.c instead of creating a common file or ifdef'ing in bootmem.c. The followings are duplicated. * {min|max}_low_pfn, max_pfn, saved_max_pfn * free_bootmem_late() * ___alloc_bootmem() * __alloc_bootmem_low() The followings are applicable only to nobootmem and moved verbatim. * __free_pages_memory() * free_all_memory_core_early() The followings are not applicable to nobootmem and omitted in nobootmem.c. * reserve_bootmem_node() * reserve_bootmem() The rest split function bodies according to CONFIG_NO_BOOTMEM. Makefile is updated so that only either bootmem.c or nobootmem.c is built according to CONFIG_NO_BOOTMEM. This patch doesn't introduce any behavior change. -tj: Rewrote commit description. Suggested-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Acked-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 22 2月, 2011 4 次提交
-
-
由 Yinghai Lu 提交于
Alloc code is much bigger the distance setting. Separate it out into numa_alloc_distance() for readability. -v2: Let alloc_numa_distance to return -ENOMEM on failing path, requested by tj. -tj: Description update. Minor tweaks including function name, location and return value check. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com>
-
由 Tejun Heo 提交于
Create numa_emulation.c and move all NUMA emulation code there. The definitions of struct numa_memblk and numa_meminfo are moved to numa_64.h. Also, numa_remove_memblk_from(), numa_cleanup_meminfo(), numa_reset_distance() along with numa_emulation() are made global. - v2: Internal declarations moved to numa_internal.h as suggested by Yinghai. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NYinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com>
-
由 Tejun Heo 提交于
Update numa_emulation() such that, it - takes @numa_meminfo and @numa_dist_cnt instead of directly referencing the global variables. - copies the distance table by iterating each distance with node_distance() instead of memcpy'ing the distance table. - tests emu_cmdline to determine whether emulation is requested and fills emu_nid_to_phys[] with identity mapping if emulation is not used. This allows the caller to call numa_emulation() unconditionally and makes return value unncessary. - defines dummy version if CONFIG_NUMA_EMU is disabled. This patch doesn't introduce any behavior change. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com>
-
- 21 2月, 2011 1 次提交
-
-
由 Yinghai Lu 提交于
By the time setup_node_bootmem() is called, all the memblocks are already registered. As node_data is allocated from these memblocks, calling it more than once doesn't make any difference. Drop the loop. tj: Dropped comment referencing to the old behavior as suggested by David and rephrased the description. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 17 2月, 2011 23 次提交
-
-
由 Yinghai Lu 提交于
dummy_numa_init() is used only during system boot. Put it in .init like other NUMA init functions. - tj: Description update. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Yinghai Lu 提交于
Do not call __pa(numa_distance) if it was not allocated before. Calling with invalid address triggers VIRTUAL_BUG_ON() in __phys_addr() if CONFIG_DEBUG_VIRTUAL. Also reported by Ingo. http://thread.gmane.org/gmane.linux.kernel/1101306/focus=1101785 - v2: Change to check existing path as tj requested. - tj: Description update. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
NUMA emulation needs to update node distance information. It did it by remapping apicid to PXM mapping, even when amdtopology is being used. There is no reason to go through such convolution. The generic code has all the information necessary to transform the distance table to the emulated nid space. Implement generic distance table transformation in numa_emulation() and drop private implementations in srat_64 and amdtopology_64. This makes find_node_by_addr() and fake_physnodes() and related functions unnecessary, drop them. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
NUMA emulation changes node mappings and thus apicid -> node mapping needs to be updated accordingly. srat_64 and amdtopology_64 did this separately; however, all the necessary information is the mapping from emulated nodes to physical nodes which is available in emu_nid_to_phys[]. Implement common __apicid_to_node[] transformation in numa_emulation() and drop duplicate implementations. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
NUMA emulation built physnodes[] array which could only represent configurations from the physical meminfo and emulated nodes using the information. There's no reason to take this extra level of indirection. Update emulation functions so that they operate directly on numa_meminfo. This simplifies the code and makes emulation layout behave better with interleaved physical nodes. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
Both emulation layout functions - split_nodes[_size]_interleave() - didn't wrap emulated nid while laying out the fake nodes and tried to avoid interating over the specified number of nodes, which is fragile. Now that the emulation code generates numa_meminfo, the node memblks don't need to be consecutive and emulated node IDs can simply wrap. This makes the code more robust and is necessary for updates to better handle the cases where the physical nodes are interleaved. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
NUMA emulation code built nodes[] array and had its own registration path to set up the emulated nodes. Update it such that it generates emulated numa_meminfo and returns control to initmem_init() and shares the same registration path with non-emulated cases. Because {acpi|amd}_fake_nodes() expect nodes[] parameter, fake_physnodes() now generates nodes[] from numa_meminfo. This will go away with further updates. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
NUMA emulation copied physical NUMA configuration into physnodes[] and used it to reverse-map emulated nodes to physical nodes, which is unnecessarily convoluted. Build emu_nid_to_phys[] array to map emulated nids directly to the matching physical nids and use it in numa_add_cpu(). physnodes[] will be removed with further patches. - v2: Build failure when CONFIG_DEBUG_PER_CPU_MAPS due to missing local variable definition fixed. Reported by Ingo. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
* Separate out numa_add_memblk_to() from numa_add_memblk() so that different numa_meminfo can be used. * Rename cmdline to emu_cmdline. * Drop @start/last_pfn from numa_emulation() and use max_pfn directly. This patch doesn't introduce any behavior change. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
Node distance either used direct node comparison, ACPI PXM comparison or ACPI SLIT table lookup. This patch implements generic node distance handling. NUMA init methods can call numa_set_distance() to set distance between nodes and the common __node_distance() implementation will report the set distance. Due to the way NUMA emulation is implemented, the generic node distance handling is used only when emulation is not used. Later patches will update NUMA emulation to use the generic distance mechanism. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
With all memory configuration information now carried in numa_meminfo, there's no need to keep mem_nodes_parsed separate. Drop it and use numa_nodes_parsed for CPU / memory-less nodes. A new helper numa_nodemask_from_meminfo() is added to calculate memnode mask on the fly which is currently used to set node_possible_map. This simplifies NUMA init methods a bit and removes a source of possible inconsistencies. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
It's no longer necessary to keep both cpu_nodes_parsed and mem_nodes_parsed. In preparation for merge, rename cpu_nodes_parsed to numa_nodes_parsed. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
numa_nodes[] doesn't carry any information which isn't present in numa_meminfo. Each entry is simply min/max range of all the memblks for the node. This is not only redundant but also inaccurate when memblks for different nodes interleave - for example, find_node_by_addr() can return the wrong nodeid. Kill numa_nodes[] and always use numa_meminfo instead. * nodes_cover_memory() is renamed to numa_meminfo_cover_memory() and now operations on numa_meminfo and returns bool. * setup_node_bootmem() needs min/max range. Compute the range on the fly. setup_node_bootmem() invocation is restructured to use outer loop instead of hardcoding the double invocations. * find_node_by_addr() now operates on numa_meminfo. * setup_physnodes() builds physnodes[] from memblks. This will go away when emulation code is updated to use struct numa_meminfo. This patch also makes the following misc changes. * Clearing of nodes_add[] clearing is converted to memset(). * numa_add_memblk() in amd_numa_init() is moved down a bit for consistency. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
srat_64.c and amdtopology_64.c had their own versions of find_node_by_addr() which were basically the same. Add common one in numa_64.c and remove the duplicates. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
memblk sanity check was scattered around and incomplete. Consolidate and improve. * Confliction detection and cutoff_node() logic are moved to numa_cleanup_meminfo(). * numa_cleanup_meminfo() clears the unused memblks before returning. * Check and warn about invalid input parameters in numa_add_memblk(). * Check the maximum number of memblk isn't exceeded in numa_add_memblk(). * numa_cleanup_meminfo() is now called before numa_emulation() so that the emulation code also uses the cleaned up version. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
* Factor out numa_remove_memblk_from(). * Hole detection doesn't need separate start/end. Calculate start/end once. * Relocate comment. * Define iterators at the top and remove unnecessary prefix increments. This prepares for further improvements to the function. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
Separate out numa_cleanup_meminfo() from numa_register_memblks(). node_possible_map initialization is moved to the top of the split numa_register_memblks(). This patch doesn't cause behavior change. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
Arrays for memblks and nodeids and their length lived in separate variables making things unnecessarily cumbersome. Introduce struct numa_meminfo which contains all memory configuration info. This patch doesn't cause any behavior change. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
numa_emulation() called compute_hash_shift() with %NULL @nodeids which meant identity mapping between index and nodeid. Make numa_emulation() build identity array and drop %NULL @nodeids handling from populate_memnodemap() and thus from compute_hash_shift(). This is to prepare for transition to using memblks instead. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
They are empty now. Kill them. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
Move the remaining memblk registration logic from acpi_scan_nodes() to numa_register_memblks() and initmem_init(). This applies nodes_cover_memory() sanity check, memory node sorting and node_online() checking, which were only applied to acpi, to all init methods. As all memblk registration is moved to common code, active range clearing is moved to initmem_init() too and removed from bad_srat(). Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
Make both amd and dummy use numa_add_memblk() to describe the detected memory blocks. This allows initmem_init() to call numa_register_memblk() regardless of init method in use. Drop custom memory registration codes from amd and dummy. After this change, memblk merge/cleanup in numa_register_memblks() is applied to all init methods. As this makes compute_hash_shift() and numa_register_memblks() used only inside numa_64.c, make them static. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
Factor out memblk handling from srat_64.c into two functions in numa_64.c. This patch doesn't introduce any behavior change. The next patch will make all init methods use these functions. - v2: Fixed build failure on 32bit due to misplaced NR_NODE_MEMBLKS. Reported by Ingo. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
- 16 2月, 2011 7 次提交
-
-
由 Tejun Heo 提交于
With common numa_nodes[], common code in numa_64.c can access it directly. Copy directly and kill {acpi|amd}_get_nodes(). Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
ACPI and amd are using separate nodes[] array. Add numa_nodes[] and use them in all NUMA init methods. cutoff_node() cleanup is moved from srat_64.c to numa_64.c and applied in initmem_init() regardless of init methods. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
This brings amd initialization behavior closer to that of acpi. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
Use weight count on mem_nodes_parsed instead. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
ACPI and amd are using separate nodes_parsed masks. Add {cpu|mem}_nodes_parsed and use them in all NUMA init methods. Initialization of the masks and building node_possible_map are now handled commonly by initmem_init(). dummy_numa_init() is updated to set node 0 on both masks. While at it, move the info messages from scan to init. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
Reorganize initmem_init() such that, * Different NUMA init methods are iterated in a consistent way. * Each iteration re-initializes all the parameters and different method can be tried after a failure. * Dummy init is handled the same as other methods. Apart from how retry after failure, this patch doesn't change the behavior. The call sequences are kept equivalent across the conversion. After the change, bad_srat() doesn't need to clear apic to node mapping or worry about numa_off. Simplified accordingly. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
There's no reason for these to live in setup_arch(). Move them inside initmem_init(). - v2: x86-32 initmem_init() weren't updated breaking 32bit builds. Fixed. Found by Ankita. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Ankita Garg <ankita@in.ibm.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-