- 18 11月, 2010 13 次提交
-
-
由 Eric Paris 提交于
The SELinux netfilter hooks just return NF_DROP if they drop a packet. We want to signal that a drop in this hook is a permanant fatal error and is not transient. If we do this the error will be passed back up the stack in some places and applications will get a faster interaction that something went wrong. Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Paris 提交于
The current tcp_connect code completely ignores errors from sending an skb. This makes sense in many situations (like -ENOBUFFS) but I want to be able to immediately fail connections if they are denied by the SELinux netfilter hook. Netfilter does not normally return ECONNREFUSED when it drops a packet so we respect that error code as a final and fatal error that can not be recovered. Based-on-patch-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Paris 提交于
SELinux would like to pass certain fatal errors back up the stack. This patch implements the generic netfilter support for this functionality. Based-on-patch-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
- 17 11月, 2010 27 次提交
-
-
由 Dongdong Deng 提交于
With enabling CONFIG_PCI_MSI, e1000e could work in MSI/MSI-X IRQ mode, and netpoll controller didn't deal with those IRQ modes on e1000e. This patch add the handling MSI/MSI-X IRQ modes to netpoll controller, so that netconsole could work with those IRQ modes. Signed-off-by: NDongdong Deng <dongdong.deng@windriver.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
The driver can fail initializing the hardware when manageability firmware is performing concurrent MDIO operations because the hardware semaphore scheme to prevent concurrent operations between software and firmware is incorrect for 82574/82583. Instead of using the SWSM register, the driver should be using the EXTCNF_CTRL register. A software mutex is also added to prevent simultaneous software threads from performing similar concurrent accesses. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
SerDes Link detection on certain 82571 mezzanine cards can fail when the link is forced, the link partner does not recognize forced link and the link partner sends null code words. Detect the null code words and return to auto-negotiation state which causes the link partner to begin responding with valid code words. Within a reasonable interval the link will finally settle as forced by both partners. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
declaration. Reported-by: NAndi Kleen <andi@firstfloor.org> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Julian Stecklina 提交于
Removed unused variable in igbvf. Signed-off-by: NJulian Stecklina <jsteckli@os.inf.tu-dresden.de> Acked-by: NGreg Rose <greg.v.rose@intel.com> Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Update version string and copyright notice Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
The driver is calling netif_carrier_off and netif_tx_stop_all_queues before the netdevice is registered which causes an Oops. Move call to netif_carrier_off after the netdevice is registered and remove call to netif_tx_stop_all_queues because there aren't any TX queues yet. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Eric Dumazet 提交于
I noticed ring variable was initialized before allocations, and that memory node management was a bit ugly. We also leak memory in case of ring allocations error. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
This patch adds support for the x540 MAC which is the next MAC in the 82598/82599 line. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
Adds the new x540.c file and Aquantia 1202 PHY for X540 support. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
The new MAC type X540 shares much of the same functionality of some silicon specific functions. To reduce duplicate code, made these functions generic. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Yi Zou 提交于
When invalidating the DDP context is invalidated, the HW may not be done with the user buffer right away. In which case, we poll the FCBUFF register to check if the buffer valid bit is cleared or not, if not, we wait for max 100us that is guaranteed by the HW. Signed-off-by: NYi Zou <yi.zou@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Yi Zou 提交于
The hw automatically invalidates the context if DDP is successful or there is error detected. In case there is no error status available from the hw, initializing the per context error status to be 1 allows the DDP context to be still invalidated via the upper layer call to ddp_put(). Signed-off-by: NYi Zou <yi.zou@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Yi Zou 提交于
There is no point to allow incoming DDP requests from the upper layer stack if the adapter is going down or being reset. Signed-off-by: NYi Zou <yi.zou@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 John Fastabend 提交于
The Tx hang logic has been known to detect false hangs when the device is receiving pause frames or has delayed processing for some other reason. This patch makes the logic more robust and resolves these known issues. The old logic checked to see if the device was paused by querying the HW then the hang logic was aborted if the device was currently paused. This check was racy because the device could have been in the pause state any time up to this check. The other operation of the hang logic is to verify the Tx ring is still advancing the old logic checked the EOP timestamp. This is not sufficient to determine the ring is not advancing but only infers that it may be moving slowly. Here we add logic to track the number of completed Tx descriptors and use the adapter stats to check if any pause frames have been received since the previous Tx hang check. This way we avoid racing with the HW register and do not detect false hangs if the ring is advancing slowly. This patch is primarily the work of Jesse Brandeburg. I clean it up some and fixed the PFC checking. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change resolves some null function pointer accesses on 82598 when a multi-speed fiber module is inserted into the adapter. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
The q_vector back pointer was not being set in the rings so it would not have been possible to determine the parent q_vector of the ring. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change cleans up some of the items in ixgbe_map_rings_to_vectors. Specifically it merges the two for loops and drops the unnecessary vectors parameter. It also moves the vector names into the q_vectors themselves. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change is meant to improve the stack utilization and simplify the math used in ixgbe_set_itr_msix. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
There are a number of places where we use the variable j to contain the register index of the ring. Instead of using such a non-descriptive variable name it is better that we name it reg_idx so that it is clear what the variable contains. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change is just to cleanup some confusing logic in ixgbe_cache_ring_rss which can be simplified by adding a conditional with return to the start of the call. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change address a few whitespace issues in DCB #ifdefs, adds a comment calling out the DCB specific registers, and nests an if statement inline with a number of if statements related to flow control. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change adds support for certain 82599 based Mezzanine adapters. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change makes it so that we always disable SCTP regardless of mac type since we shouldn't need to check mac type before disabling a feature that isn't supported on a given piece of hardware. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change replaces a number of if/elseif/else statements with switch statements to support the addition of future devices to the ixgbe driver. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change cleans up the use of rsc_count and changes it to a boolean since the actual numerical value is used nowhere in the Rx cleanup path. I am also moving the skb count into the RSC_CB path since it is much easier to track it there than when it is passed as a parameter to various function calls. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change cleans up the ixgbe_atr filter setup function so that it uses fewer items from the stack. Since the code is only applicable to IPv4 w/ TCP it makes sense to just use the pointers based on the headers themselves instead of copying them to temp variables and then writing those to the filters. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-