stable inclusion
from stable-5.10.26
commit bb2e41e65c33a40502c9d876c7a337984d665a30
bugzilla: 51363

--------------------------------

commit 207da4c8 upstream.

Commit 78d3bb44 ("kbuild: Fix <linux/version.h> for empty SUBLEVEL
or PATCHLEVEL") fixed the build error for empty SUBLEVEL or PATCHLEVEL
by prepending a zero.

Commit 9b82f13e ("kbuild: clamp SUBLEVEL to 255") re-introduced
this issue.

This time, we cannot take the same approach because we have C code:

  #define LINUX_VERSION_PATCHLEVEL $(PATCHLEVEL)
  #define LINUX_VERSION_SUBLEVEL $(SUBLEVEL)

Replace empty SUBLEVEL/PATCHLEVEL with a zero.

Fixes: 9b82f13e ("kbuild: clamp SUBLEVEL to 255")
Reported-by: NChristian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Reviewed-and-tested-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 72714560fbc7c2fc79e4a5e79c4aa2fd2118c616
bugzilla: 51363

--------------------------------

commit 093b036a upstream.

syzbot found WARNING in __alloc_pages_nodemask()[1] when order >= MAX_ORDER.
It was caused by a huge length value passed from userspace to qrtr_tun_write_iter(),
which tries to allocate skb. Since the value comes from the untrusted source
there is no need to raise a warning in __alloc_pages_nodemask().

[1] WARNING in __alloc_pages_nodemask+0x5f8/0x730 mm/page_alloc.c:5014
Call Trace:
 __alloc_pages include/linux/gfp.h:511 [inline]
 __alloc_pages_node include/linux/gfp.h:524 [inline]
 alloc_pages_node include/linux/gfp.h:538 [inline]
 kmalloc_large_node+0x60/0x110 mm/slub.c:3999
 __kmalloc_node_track_caller+0x319/0x3f0 mm/slub.c:4496
 __kmalloc_reserve net/core/skbuff.c:150 [inline]
 __alloc_skb+0x4e4/0x5a0 net/core/skbuff.c:210
 __netdev_alloc_skb+0x70/0x400 net/core/skbuff.c:446
 netdev_alloc_skb include/linux/skbuff.h:2832 [inline]
 qrtr_endpoint_post+0x84/0x11b0 net/qrtr/qrtr.c:442
 qrtr_tun_write_iter+0x11f/0x1a0 net/qrtr/tun.c:98
 call_write_iter include/linux/fs.h:1901 [inline]
 new_sync_write+0x426/0x650 fs/read_write.c:518
 vfs_write+0x791/0xa30 fs/read_write.c:605
 ksys_write+0x12d/0x250 fs/read_write.c:658
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+80dccaee7c6630fa9dcf@syzkaller.appspotmail.com
Signed-off-by: NPavel Skripkin <paskripkin@gmail.com>
Acked-by: NAlexander Lobakin <alobakin@pm.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 6cae8095490caae12875300243ec94b39b6a2a78
bugzilla: 51363

--------------------------------

commit 3ebba796 upstream.

If we create it in a disabled state because IORING_SETUP_R_DISABLED is
set on ring creation, we need to ensure that we've kicked the thread if
we're exiting before it's been explicitly disabled. Otherwise we can run
into a deadlock where exit is waiting go park the SQPOLL thread, but the
SQPOLL thread itself is waiting to get a signal to start.

That results in the below trace of both tasks hung, waiting on each other:

INFO: task syz-executor458:8401 blocked for more than 143 seconds.
      Not tainted 5.11.0-next-20210226-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor458 state:D stack:27536 pid: 8401 ppid:  8400 flags:0x00004004
Call Trace:
 context_switch kernel/sched/core.c:4324 [inline]
 __schedule+0x90c/0x21a0 kernel/sched/core.c:5075
 schedule+0xcf/0x270 kernel/sched/core.c:5154
 schedule_timeout+0x1db/0x250 kernel/time/timer.c:1868
 do_wait_for_common kernel/sched/completion.c:85 [inline]
 __wait_for_common kernel/sched/completion.c:106 [inline]
 wait_for_common kernel/sched/completion.c:117 [inline]
 wait_for_completion+0x168/0x270 kernel/sched/completion.c:138
 io_sq_thread_park fs/io_uring.c:7115 [inline]
 io_sq_thread_park+0xd5/0x130 fs/io_uring.c:7103
 io_uring_cancel_task_requests+0x24c/0xd90 fs/io_uring.c:8745
 __io_uring_files_cancel+0x110/0x230 fs/io_uring.c:8840
 io_uring_files_cancel include/linux/io_uring.h:47 [inline]
 do_exit+0x299/0x2a60 kernel/exit.c:780
 do_group_exit+0x125/0x310 kernel/exit.c:922
 __do_sys_exit_group kernel/exit.c:933 [inline]
 __se_sys_exit_group kernel/exit.c:931 [inline]
 __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:931
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x43e899
RSP: 002b:00007ffe89376d48 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00000000004af2f0 RCX: 000000000043e899
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffffffffffc0 R09: 0000000010000000
R10: 0000000000008011 R11: 0000000000000246 R12: 00000000004af2f0
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001
INFO: task iou-sqp-8401:8402 can't die for more than 143 seconds.
task:iou-sqp-8401    state:D stack:30272 pid: 8402 ppid:  8400 flags:0x00004004
Call Trace:
 context_switch kernel/sched/core.c:4324 [inline]
 __schedule+0x90c/0x21a0 kernel/sched/core.c:5075
 schedule+0xcf/0x270 kernel/sched/core.c:5154
 schedule_timeout+0x1db/0x250 kernel/time/timer.c:1868
 do_wait_for_common kernel/sched/completion.c:85 [inline]
 __wait_for_common kernel/sched/completion.c:106 [inline]
 wait_for_common kernel/sched/completion.c:117 [inline]
 wait_for_completion+0x168/0x270 kernel/sched/completion.c:138
 io_sq_thread+0x27d/0x1ae0 fs/io_uring.c:6717
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
INFO: task iou-sqp-8401:8402 blocked for more than 143 seconds.

Reported-by: syzbot+fb5458330b4442f2090d@syzkaller.appspotmail.com
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit a7acb614287b7de8bf86d6758dac43bbd1d29534
bugzilla: 51363

--------------------------------

commit 9c7d83ae upstream.

syzbot is hitting WARN_ON(pstore_sb != sb) at pstore_kill_sb() [1], for the
assumption that pstore_sb != NULL is wrong because pstore_fill_super() will
not assign pstore_sb = sb when new_inode() for d_make_root() returned NULL
(due to memory allocation fault injection).

Since mount_single() calls pstore_kill_sb() when pstore_fill_super()
failed, pstore_kill_sb() needs to be aware of such failure path.

[1] https://syzkaller.appspot.com/bug?id=6abacb8da5137cb47a416f2bef95719ed60508a0Reported-by: Nsyzbot <syzbot+d0cf0ad6513e9a1da5df@syzkaller.appspotmail.com>
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NKees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210214031307.57903-1-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 5f7d470696add2a0eb0d9f34e32b0ced2dddb9ad
bugzilla: 51363

--------------------------------

commit 6a77c6bb upstream.

SAMPLE_OA parameter enables sampling of OA buffer and results in a call
to init the OA buffer which initializes the OA unit head/tail pointers.
The OA_EXPONENT parameter controls the periodicity of the OA reports in
the OA buffer and results in starting a hrtimer.

Before gen12, all use cases required the use of the OA buffer and i915
enforced this setting when vetting out the parameters passed. In these
platforms the hrtimer was enabled if OA_EXPONENT was passed. This worked
fine since it was implied that SAMPLE_OA is always passed.

With gen12, this changed. Users can use perf without enabling the OA
buffer as in OAR use cases. While an OAR use case should ideally not
start the hrtimer, we see that passing an OA_EXPONENT parameter will
start the hrtimer even though SAMPLE_OA is not specified. This results
in an uninitialized OA buffer, so the head/tail pointers used to track
the buffer are zero.

This itself does not fail, but if we ran a use-case that SAMPLED the OA
buffer previously, then the OA_TAIL register is still pointing to an old
value. When the timer callback runs, it ends up calculating a
wrong/large number of available reports. Since we do a spinlock_irq_save
and start processing a large number of reports, NMI watchdog fires and
causes a crash.

Start the timer only if SAMPLE_OA is specified.

v2:
- Drop SAMPLE OA check when appending samples (Ashutosh)
- Prevent read if OA buffer is not being sampled

Fixes: 00a7f0d7 ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: NUmesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305210947.58751-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit be0bdd67)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit cb14e99e886f4f13ab0b804b7e3544fbc9212bbb
bugzilla: 51363

--------------------------------

commit f1442d63 upstream.

If an auth module's accept op returns SVC_CLOSE, svc_process_common()
enters a call path that does not call svc_authorise() before leaving the
function, and thus leaks a reference on the auth module's refcount. Hence,
make sure calls to svc_authenticate() and svc_authorise() are paired for
all call paths, to make sure rpc auth modules can be unloaded.
Signed-off-by: NDaniel Kobras <kobras@puzzle-itc.de>
Fixes: 4d712ef1 ("svcauth_gss: Close connection when dropping an incoming message")
Link: https://lore.kernel.org/linux-nfs/3F1B347F-B809-478F-A1E9-0BE98E22B0F0@oracle.com/T/#tSigned-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 2ea2d3a7980030888acf3e283673594d685430b6
bugzilla: 51363

--------------------------------

commit 4c050286 upstream.

When qemu with vhost-vdpa netdevice is run for the first time,
it works well. But after the VM is powered off, the next qemu run
causes kernel panic due to a NULL pointer dereference in
irq_bypass_register_producer().

When the VM is powered off, vhost_vdpa_clean_irq() misses on calling
irq_bypass_unregister_producer() for irq 0 because of the existing check.

This leaves stale producer nodes, which are reset in
vhost_vring_call_reset() when vhost_dev_init() is invoked during the
second qemu run.

As the node member of struct irq_bypass_producer is also initialized
to zero, traversal on the producers list causes crash due to NULL
pointer dereference.

Fixes: 2cf1ba9a ("vhost_vdpa: implement IRQ offloading in vhost_vdpa")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211711Signed-off-by: NGautam Dawar <gdawar.xilinx@gmail.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210224114845.104173-1-gdawar.xilinx@gmail.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 3e5a1bb6ea201bdd4609a0ef22bd53c2be09eea3
bugzilla: 51363

--------------------------------

commit 179209fa upstream.

As IOMMU_API is a kconfig without a description (eg does not show in the
menu) the correct operator is select not 'depends on'. Using 'depends on'
for this kind of symbol means VFIO is not selectable unless some other
random kconfig has already enabled IOMMU_API for it.

Fixes: cba3345c ("vfio: VFIO core")
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>
Message-Id: <1-v1-df057e0f92c3+91-vfio_arm_compile_test_jgg@nvidia.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit c2219627091c8d22d5979ec10703709d96b24ffb
bugzilla: 51363

--------------------------------

commit 6820bf77 upstream.

This brings it in line with the regular tcp backchannel, which also has
all those timeouts disabled.

Prevents the backchannel from timing out, getting some async operations
like server side copying getting stuck indefinitely on the client side.
Signed-off-by: NTimo Rothenpieler <timo@rothenpieler.org>
Fixes: 5d252f90 ("svcrdma: Add class for RDMA backwards direction transport")
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 982b899ba672c1eb2e0c01fef197bda13de4af55
bugzilla: 51363

--------------------------------

commit 614c9750 upstream.

A cleanup of the inter SSC copy needs to call fput() of the source
file handle to make sure that file structure is freed as well as
drop the reference on the superblock to unmount the source server.

Fixes: 36e1e5ba ("NFSD: Fix use-after-free warning when doing inter-server copy")
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com>
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NDai Ngo <dai.ngo@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 800369d61add0216a72b4c433c246832b28a790e
bugzilla: 51363

--------------------------------

commit c7de87ff upstream.

[ This problem is in mainline, but only rt has the chops to be
able to detect it. ]

Lockdep reports a circular lock dependency between serv->sv_lock and
softirq_ctl.lock on system shutdown, when using a kernel built with
CONFIG_PREEMPT_RT=y, and a nfs mount exists.

This is due to the definition of spin_lock_bh on rt:

	local_bh_disable();
	rt_spin_lock(lock);

which forces a softirq_ctl.lock -> serv->sv_lock dependency.  This is
not a problem as long as _every_ lock of serv->sv_lock is a:

	spin_lock_bh(&serv->sv_lock);

but there is one of the form:

	spin_lock(&serv->sv_lock);

This is what is causing the circular dependency splat.  The spin_lock()
grabs the lock without first grabbing softirq_ctl.lock via local_bh_disable.
If later on in the critical region,  someone does a local_bh_disable, we
get a serv->sv_lock -> softirq_ctrl.lock dependency established.  Deadlock.

Fix is to make serv->sv_lock be locked with spin_lock_bh everywhere, no
exceptions.

[  OK  ] Stopped target NFS client services.
         Stopping Logout off all iSCSI sessions on shutdown...
         Stopping NFS server and services...
[  109.442380]
[  109.442385] ======================================================
[  109.442386] WARNING: possible circular locking dependency detected
[  109.442387] 5.10.16-rt30 #1 Not tainted
[  109.442389] ------------------------------------------------------
[  109.442390] nfsd/1032 is trying to acquire lock:
[  109.442392] ffff994237617f60 ((softirq_ctrl.lock).lock){+.+.}-{2:2}, at: __local_bh_disable_ip+0xd9/0x270
[  109.442405]
[  109.442405] but task is already holding lock:
[  109.442406] ffff994245cb00b0 (&serv->sv_lock){+.+.}-{0:0}, at: svc_close_list+0x1f/0x90
[  109.442415]
[  109.442415] which lock already depends on the new lock.
[  109.442415]
[  109.442416]
[  109.442416] the existing dependency chain (in reverse order) is:
[  109.442417]
[  109.442417] -> #1 (&serv->sv_lock){+.+.}-{0:0}:
[  109.442421]        rt_spin_lock+0x2b/0xc0
[  109.442428]        svc_add_new_perm_xprt+0x42/0xa0
[  109.442430]        svc_addsock+0x135/0x220
[  109.442434]        write_ports+0x4b3/0x620
[  109.442438]        nfsctl_transaction_write+0x45/0x80
[  109.442440]        vfs_write+0xff/0x420
[  109.442444]        ksys_write+0x4f/0xc0
[  109.442446]        do_syscall_64+0x33/0x40
[  109.442450]        entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  109.442454]
[  109.442454] -> #0 ((softirq_ctrl.lock).lock){+.+.}-{2:2}:
[  109.442457]        __lock_acquire+0x1264/0x20b0
[  109.442463]        lock_acquire+0xc2/0x400
[  109.442466]        rt_spin_lock+0x2b/0xc0
[  109.442469]        __local_bh_disable_ip+0xd9/0x270
[  109.442471]        svc_xprt_do_enqueue+0xc0/0x4d0
[  109.442474]        svc_close_list+0x60/0x90
[  109.442476]        svc_close_net+0x49/0x1a0
[  109.442478]        svc_shutdown_net+0x12/0x40
[  109.442480]        nfsd_destroy+0xc5/0x180
[  109.442482]        nfsd+0x1bc/0x270
[  109.442483]        kthread+0x194/0x1b0
[  109.442487]        ret_from_fork+0x22/0x30
[  109.442492]
[  109.442492] other info that might help us debug this:
[  109.442492]
[  109.442493]  Possible unsafe locking scenario:
[  109.442493]
[  109.442493]        CPU0                    CPU1
[  109.442494]        ----                    ----
[  109.442495]   lock(&serv->sv_lock);
[  109.442496]                                lock((softirq_ctrl.lock).lock);
[  109.442498]                                lock(&serv->sv_lock);
[  109.442499]   lock((softirq_ctrl.lock).lock);
[  109.442501]
[  109.442501]  *** DEADLOCK ***
[  109.442501]
[  109.442501] 3 locks held by nfsd/1032:
[  109.442503]  #0: ffffffff93b49258 (nfsd_mutex){+.+.}-{3:3}, at: nfsd+0x19a/0x270
[  109.442508]  #1: ffff994245cb00b0 (&serv->sv_lock){+.+.}-{0:0}, at: svc_close_list+0x1f/0x90
[  109.442512]  #2: ffffffff93a81b20 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0x5/0xc0
[  109.442518]
[  109.442518] stack backtrace:
[  109.442519] CPU: 0 PID: 1032 Comm: nfsd Not tainted 5.10.16-rt30 #1
[  109.442522] Hardware name: Supermicro X9DRL-3F/iF/X9DRL-3F/iF, BIOS 3.2 09/22/2015
[  109.442524] Call Trace:
[  109.442527]  dump_stack+0x77/0x97
[  109.442533]  check_noncircular+0xdc/0xf0
[  109.442546]  __lock_acquire+0x1264/0x20b0
[  109.442553]  lock_acquire+0xc2/0x400
[  109.442564]  rt_spin_lock+0x2b/0xc0
[  109.442570]  __local_bh_disable_ip+0xd9/0x270
[  109.442573]  svc_xprt_do_enqueue+0xc0/0x4d0
[  109.442577]  svc_close_list+0x60/0x90
[  109.442581]  svc_close_net+0x49/0x1a0
[  109.442585]  svc_shutdown_net+0x12/0x40
[  109.442588]  nfsd_destroy+0xc5/0x180
[  109.442590]  nfsd+0x1bc/0x270
[  109.442595]  kthread+0x194/0x1b0
[  109.442600]  ret_from_fork+0x22/0x30
[  109.518225] nfsd: last server has exited, flushing export cache
[  OK  ] Stopped NFSv4 ID-name mapping service.
[  OK  ] Stopped GSSAPI Proxy Daemon.
[  OK  ] Stopped NFS Mount Daemon.
[  OK  ] Stopped NFS status monitor for NFSv2/3 locking..

Fixes: 719f8bcc ("svcrpc: fix xpt_list traversal locking on shutdown")
Signed-off-by: NJoe Korty <joe.korty@concurrent-rt.com>
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 12628e7779f8e191c010955058d278df5bf0c0d4
bugzilla: 51363

--------------------------------

commit bfdd89f2 upstream.

The typical result of the backwards comparison here is that the source
server in a server-to-server copy will return BAD_STATEID within a few
seconds of the copy starting, instead of giving the copy a full lease
period, so the copy_file_range() call will end up unnecessarily
returning a short read.

Fixes: 624322f1 "NFSD add COPY_NOTIFY operation"
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 5ea0aa29ad4b8bc96b8cfcfb367f04b50b9cf92f
bugzilla: 51363

--------------------------------

commit d30881f5 upstream.

If a file is unhashed, then we're going to reject it anyway and retry,
so make sure we skip it when we're doing the RCU lockless lookup.
This avoids a number of unnecessary nfserr_jukebox returns from
nfsd_file_acquire()

Fixes: 65294c1f ("nfsd: add a new struct file caching facility to nfsd")
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 628f39a57a461379643c2ebc4837e31da63abfd2
bugzilla: 51363

--------------------------------

commit d218a8a3 upstream.

From the base spec, Figure 78:

  "Controller Configuration, these fields are defined as parameters to
   configure an "I/O Controller (IOC)" and not to configure a "Discovery
   Controller (DC).

   ...
   If the controller does not support I/O queues, then this field shall
   be read-only with a value of 0h

Just perform this check for I/O controllers.

Fixes: a07b4970 ("nvmet: add a generic NVMe target")
Reported-by: NBelanger, Martin <Martin.Belanger@dell.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit b4f911e3a9821d20d2a440cdb5863b43242fcfbe
bugzilla: 51363

--------------------------------

commit fd0823f4 upstream.

When the controller sends us a 0-length r2t PDU we should not attempt to
try to set up a h2cdata PDU but rather conclude that this is a buggy
controller (forward progress is not possible) and simply fail it
immediately.

Fixes: 3f2304f8 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: NBelanger, Martin <Martin.Belanger@dell.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 7089cdfce32f9cf5397350140216bbc000347bae
bugzilla: 51363

--------------------------------

commit 72f57242 upstream.

We only setup io queues for nvme controllers, and it makes absolutely no
sense to allow a controller (re)connect without any I/O queues.  If we
happen to fail setting the queue count for any reason, we should not
allow this to be a successful reconnect as I/O has no chance in going
through. Instead just fail and schedule another reconnect.

Fixes: 3f2304f8 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit a83e5c6c35fa0ad0259b850e1f727fee922e3ba3
bugzilla: 51363

--------------------------------

commit bb833370 upstream.

For our pure advisory use-case, we only rely on this call as a hint, so
fix the warning complaints of using the smp_processor_id variants with
preemption enabled.

Fixes: db5ad6b7 ("nvme-tcp: try to send request in queue_rq context")
Fixes: ada83177 ("nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT")
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: NYi Zhang <yi.zhang@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit fd9e2b99974019a717c975c2c2fa08729ab712f3
bugzilla: 51363

--------------------------------

commit b94e8cd2 upstream.

We voluntarily limit the Write Zeroes sizes to the MDTS value provided by
the hardware, but currently get the units wrong, so fix that.

Fixes: 6e02318e ("nvme: add support for the Write Zeroes command")
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Tested-by: NKlaus Jensen <k.jensen@samsung.com>
Reviewed-by: NKlaus Jensen <k.jensen@samsung.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 2d202085d2dd53b8364a17050887a805c9e1601f
bugzilla: 51363

--------------------------------

commit 50b1affc upstream.

The shifting of the u8 integer device by 24 bits to the left will
be promoted to a 32 bit signed int and then sign-extended to a
64 bit unsigned long. In the event that the top bit of device is
set then all then all the upper 32 bits of the unsigned long will
end up as also being set because of the sign-extension. Fix this
by casting device to an unsigned long before the shift.

Addresses-Coverity: ("Unintended sign extension")
Fixes: a07df82c ("ALSA: usb-audio: Add DJM750 to Pioneer mixer quirk")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210318132008.15266-1-colin.king@canonical.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 64195f022ae8c24e0abccc1545d557b064e73ed3
bugzilla: 51363

--------------------------------

commit a7889c63 upstream.

afs_listxattr() lists all the available special afs xattrs (i.e. those in
the "afs.*" space), no matter what type of server we're dealing with.  But
OpenAFS servers, for example, cannot deal with some of the extra-capable
attributes that AuriStor (YFS) servers provide.  Unfortunately, the
presence of the afs.yfs.* attributes causes errors[1] for anything that
tries to read them if the server is of the wrong type.

Fix the problem by removing afs_listxattr() so that none of the special
xattrs are listed (AFS doesn't support xattrs).  It does mean, however,
that getfattr won't list them, though they can still be accessed with
getxattr() and setxattr().

This can be tested with something like:

	getfattr -d -m ".*" /afs/example.com/path/to/file

With this change, none of the afs.* attributes should be visible.

Changes:
ver #2:
 - Hide all of the afs.* xattrs, not just the ACL ones.

Fixes: ae46578b ("afs: Get YFS ACLs and information through xattrs")
Reported-by: NGaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NGaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Reviewed-by: NJeffrey Altman <jaltman@auristor.com>
Reviewed-by: NMarc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003502.html [1]
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003567.html # v1
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003573.html # v2
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 78ba4793b084f722a0aaf5f32a3d9f7c3e284b22
bugzilla: 51363

--------------------------------

commit 64fcbb61 upstream.

If someone attempts to access YFS-related xattrs (e.g. afs.yfs.acl) on a
file on a non-YFS AFS server (such as OpenAFS), then the kernel will jump
to a NULL function pointer because the afs_fetch_acl_operation descriptor
doesn't point to a function for issuing an operation on a non-YFS
server[1].

Fix this by making afs_wait_for_operation() check that the issue_afs_rpc
method is set before jumping to it and setting -ENOTSUPP if not.  This fix
also covers other potential operations that also only exist on YFS servers.

afs_xattr_get/set_yfs() then need to translate -ENOTSUPP to -ENODATA as the
former error is internal to the kernel.

The bug shows up as an oops like the following:

	BUG: kernel NULL pointer dereference, address: 0000000000000000
	[...]
	Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
	[...]
	Call Trace:
	 afs_wait_for_operation+0x83/0x1b0 [kafs]
	 afs_xattr_get_yfs+0xe6/0x270 [kafs]
	 __vfs_getxattr+0x59/0x80
	 vfs_getxattr+0x11c/0x140
	 getxattr+0x181/0x250
	 ? __check_object_size+0x13f/0x150
	 ? __fput+0x16d/0x250
	 __x64_sys_fgetxattr+0x64/0xb0
	 do_syscall_64+0x49/0xc0
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9
	RIP: 0033:0x7fb120a9defe

This was triggered with "cp -a" which attempts to copy xattrs, including
afs ones, but is easier to reproduce with getfattr, e.g.:

	getfattr -d -m ".*" /afs/openafs.org/

Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept")
Reported-by: NGaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NGaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Reviewed-by: NMarc Dionne <marc.dionne@auristor.com>
Reviewed-by: NJeffrey Altman <jaltman@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003498.html [1]
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003566.html # v1
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003572.html # v2
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 07fa872bf79cb5b8b6ba13a2918233defadae338
bugzilla: 51363

--------------------------------

commit 8ca88d53 upstream.

This reverts commit 1e30f642 ("ASoC: simple-card-utils: Fix device
module clock"). The original patch ended up breaking following platform,
which depends on set_sysclk() to configure internal PLL on wm8904 codec
and expects simple-card-utils to not update the MCLK rate.
 - "arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts"

It would be best if codec takes care of setting MCLK clock via DAI
set_sysclk() callback.
Reported-by: NMichael Walle <michael@walle.cc>
Suggested-by: NMark Brown <broonie@kernel.org>
Suggested-by: NMichael Walle <michael@walle.cc>
Fixes: 1e30f642 ("ASoC: simple-card-utils: Fix device module clock")
Signed-off-by: NSameer Pujar <spujar@nvidia.com>
Tested-by: NMichael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/1615829492-8972-2-git-send-email-spujar@nvidia.comSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit d1ab87e31761111b9b450b24bf4f797e7261c817
bugzilla: 51363

--------------------------------

commit 9922f50f upstream.

The max boundary check while parsing dai ids makes
sound card registration fail after common up dai ids.

Fixes: cd3484f7 ("ASoC: qcom: Fix broken support to MI2S TERTIARY and QUATERNARY")
Signed-off-by: NSrinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/20210311154557.24978-1-srivasam@codeaurora.orgSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 1ae54de79fba3f08c4491127f48e5e937ec3d518
bugzilla: 51363

--------------------------------

commit 3bb4852d upstream.

set channel map can be passed with a channel maps, however if
the number of channels that are passed are more than the actual
supported channels then we would be accessing array out of bounds.

So add a sanity check to validate these numbers!

Fixes: a61f3b4f ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Reported-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210309142129.14182-4-srinivas.kandagatla@linaro.orgSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 03079a0f1bf75f66a243d4484563dfbbe9d021fa
bugzilla: 51363

--------------------------------

commit 4800fe6e upstream.

WCD934x has only 13 RX SLIM ports however we are setting it as 16
in set_channel_map, this will lead to array out of bounds error!

Orignally caught by enabling USBAN array out of bounds check:

Fixes: 5caf64c6 ("ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga")
Reported-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210309142129.14182-3-srinivas.kandagatla@linaro.orgSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 26b08c08a5f3008fe45822d8b163f1516178c42b
bugzilla: 51363

--------------------------------

commit 1c668e1c upstream.

Static analysis Coverity had detected a potential array out-of-bounds
write issue due to the fact that MAX AFE port Id was set to 16 instead
of using AFE_PORT_MAX macro.

Fix this by properly using AFE_PORT_MAX macro.

Fixes: 1b93a884 ("ASoC: qcom: sdm845: handle soundwire stream")
Reported-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210309142129.14182-2-srinivas.kandagatla@linaro.orgSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 47a6cadb6cfd784837e71a95bbff2d9dd9d09aee
bugzilla: 51363

--------------------------------

commit fd829918 upstream.

The ADSPCS_SPA is Set Power Active bit. To check if DSP is powered
down, we need to check ADSPCS_CPA, the Current Power Active bit.

Fixes: 747503b1 ("ASoC: SOF: Intel: Add Intel specific HDA DSP HW operations")
Reviewed-by: NRander Wang <rander.wang@intel.com>
Reviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: NPan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210309004127.4940-1-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit b94b71a7a6f62f5f85c4949b1f71aa460aa39604
bugzilla: 51363

--------------------------------

commit 5bb0ecdd upstream.

We only unregister the platform device during the .remove operation,
but if the probe fails we will never reach this sequence.
Suggested-by: NBard Liao <yung-chuan.liao@linux.intel.com>
Fixes: dd96daca ("ASoC: SOF: Intel: Add APL/CNL HW DSP support")
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: NGuennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210302003410.1178535-1-pierre-louis.bossart@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 4da5a9a73c4c4c3405860022ca17dbad2a1817f0
bugzilla: 51363

--------------------------------

commit ca08ddfd upstream.

When I added the quirk for the "HP Pavilion x2 10-p0XX" I copied the
byt_rt5640_quirk_table[] entry for the HP Pavilion x2 10-k0XX / 10-n0XX
models since these use almost the same settings.

While doing this I accidentally also copied and kept the non-standard
OVCD_TH_1500UA setting used on those models. This too low threshold is
causing headsets to often be seen as headphones (without a headset-mic)
and when correctly identified it is causing ghost play/pause
button-presses to get detected.

Correct the HP Pavilion x2 10-p0XX quirk to use the default OVCD_TH_2000UA
setting, fixing these problems.

Fixes: fbdae7d6 ("ASoC: Intel: bytcr_rt5640: Fix HP Pavilion x2 Detachable quirks")
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210224105052.42116-1-hdegoede@redhat.comSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 118cfdc770cdfff793d4f68b3bd45903fea6d474
bugzilla: 51363

--------------------------------

commit 87263968 upstream.

When using the driver in I2S TDM mode, the _fsl_ssi_set_dai_fmt()
function rewrites the number of slots previously set by the
fsl_ssi_set_dai_tdm_slot() function to 2 by default.
To fix this, let's use the saved slot count value or, if TDM
is not used and the slot count is not set, proceed as before.

Fixes: 4f14f5c1 ("ASoC: fsl_ssi: Fix number of words per frame for I2S-slave mode")
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Acked-by: NNicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210216114221.26635-1-shc_work@mail.ruSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 223dc51caa51d72ca4cc3662450da7651eca4427
bugzilla: 51363

--------------------------------

commit 34fa493a upstream.

[Why]
DCN30 needs to correctly program reversed gamma curve, which DCN20
already has.
Also needs to fix a bug that 252-255 values are clipped.

[How]
Apply two fixes into DCN30.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1513Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NCalvin Hou <Calvin.Hou@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Acked-by: NVladimir Stempen <Vladimir.Stempen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 4daa70a80c68c76df87d70565cf62f716e240e0f
bugzilla: 51363

--------------------------------

commit 0bde59c1 upstream.

In vhost_vdpa_set_config_call() if eventfd_ctx_fdget() fails the
'v->config_ctx' contains an error instead of a valid pointer.

Since we consider 'v->config_ctx' valid if it is not NULL, we should
set it to NULL in this case to avoid to use an invalid pointer in
other functions such as vhost_vdpa_config_put().

Fixes: 776f3950 ("vhost_vdpa: Support config interrupt in vdpa")
Cc: lingshan.zhu@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210311135257.109460-3-sgarzare@redhat.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 49ca3100fbaf864853c922c8f7a8fe7090a83860
bugzilla: 51363

--------------------------------

commit f6bbf001 upstream.

When the 'v->config_ctx' eventfd_ctx reference is released we didn't
set it to NULL. So if the same character device (e.g. /dev/vhost-vdpa-0)
is re-opened, the 'v->config_ctx' is invalid and calling again
vhost_vdpa_config_put() causes use-after-free issues like the
following refcount_t underflow:

    refcount_t: underflow; use-after-free.
    WARNING: CPU: 2 PID: 872 at lib/refcount.c:28 refcount_warn_saturate+0xae/0xf0
    RIP: 0010:refcount_warn_saturate+0xae/0xf0
    Call Trace:
     eventfd_ctx_put+0x5b/0x70
     vhost_vdpa_release+0xcd/0x150 [vhost_vdpa]
     __fput+0x8e/0x240
     ____fput+0xe/0x10
     task_work_run+0x66/0xa0
     exit_to_user_mode_prepare+0x118/0x120
     syscall_exit_to_user_mode+0x21/0x50
     ? __x64_sys_close+0x12/0x40
     do_syscall_64+0x45/0x50
     entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 776f3950 ("vhost_vdpa: Support config interrupt in vdpa")
Cc: lingshan.zhu@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210311135257.109460-2-sgarzare@redhat.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NZhu Lingshan <lingshan.zhu@intel.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 2c8d6a9474f07375c87c4dc6f008610b3ce755a7
bugzilla: 51363

--------------------------------

commit 34e49994 upstream.

The free space tree bitmap slab cache is created with SLAB_RED_ZONE but
that's a debugging flag and not always enabled. Also the other slabs are
created with at least SLAB_MEM_SPREAD that we want as well to average
the memory placement cost.
Reported-by: NVlastimil Babka <vbabka@suse.cz>
Fixes: 3acd4850 ("btrfs: fix allocation of free space cache v1 bitmap pages")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 38ffe9eaeb7cce383525439f0948f9eb74632e1d
bugzilla: 51363

--------------------------------

commit dbcc7d57 upstream.

While resolving backreferences, as part of a logical ino ioctl call or
fiemap, we can end up hitting a BUG_ON() when replaying tree mod log
operations of a root, triggering a stack trace like the following:

  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/ctree.c:1210!
  invalid opcode: 0000 [#1] SMP KASAN PTI
  CPU: 1 PID: 19054 Comm: crawl_335 Tainted: G        W         5.11.0-2d11c0084b02-misc-next+ #89
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
  RIP: 0010:__tree_mod_log_rewind+0x3b1/0x3c0
  Code: 05 48 8d 74 10 (...)
  RSP: 0018:ffffc90001eb70b8 EFLAGS: 00010297
  RAX: 0000000000000000 RBX: ffff88812344e400 RCX: ffffffffb28933b6
  RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff88812344e42c
  RBP: ffffc90001eb7108 R08: 1ffff11020b60a20 R09: ffffed1020b60a20
  R10: ffff888105b050f9 R11: ffffed1020b60a1f R12: 00000000000000ee
  R13: ffff8880195520c0 R14: ffff8881bc958500 R15: ffff88812344e42c
  FS:  00007fd1955e8700(0000) GS:ffff8881f5600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007efdb7928718 CR3: 000000010103a006 CR4: 0000000000170ee0
  Call Trace:
   btrfs_search_old_slot+0x265/0x10d0
   ? lock_acquired+0xbb/0x600
   ? btrfs_search_slot+0x1090/0x1090
   ? free_extent_buffer.part.61+0xd7/0x140
   ? free_extent_buffer+0x13/0x20
   resolve_indirect_refs+0x3e9/0xfc0
   ? lock_downgrade+0x3d0/0x3d0
   ? __kasan_check_read+0x11/0x20
   ? add_prelim_ref.part.11+0x150/0x150
   ? lock_downgrade+0x3d0/0x3d0
   ? __kasan_check_read+0x11/0x20
   ? lock_acquired+0xbb/0x600
   ? __kasan_check_write+0x14/0x20
   ? do_raw_spin_unlock+0xa8/0x140
   ? rb_insert_color+0x30/0x360
   ? prelim_ref_insert+0x12d/0x430
   find_parent_nodes+0x5c3/0x1830
   ? resolve_indirect_refs+0xfc0/0xfc0
   ? lock_release+0xc8/0x620
   ? fs_reclaim_acquire+0x67/0xf0
   ? lock_acquire+0xc7/0x510
   ? lock_downgrade+0x3d0/0x3d0
   ? lockdep_hardirqs_on_prepare+0x160/0x210
   ? lock_release+0xc8/0x620
   ? fs_reclaim_acquire+0x67/0xf0
   ? lock_acquire+0xc7/0x510
   ? poison_range+0x38/0x40
   ? unpoison_range+0x14/0x40
   ? trace_hardirqs_on+0x55/0x120
   btrfs_find_all_roots_safe+0x142/0x1e0
   ? find_parent_nodes+0x1830/0x1830
   ? btrfs_inode_flags_to_xflags+0x50/0x50
   iterate_extent_inodes+0x20e/0x580
   ? tree_backref_for_extent+0x230/0x230
   ? lock_downgrade+0x3d0/0x3d0
   ? read_extent_buffer+0xdd/0x110
   ? lock_downgrade+0x3d0/0x3d0
   ? __kasan_check_read+0x11/0x20
   ? lock_acquired+0xbb/0x600
   ? __kasan_check_write+0x14/0x20
   ? _raw_spin_unlock+0x22/0x30
   ? __kasan_check_write+0x14/0x20
   iterate_inodes_from_logical+0x129/0x170
   ? iterate_inodes_from_logical+0x129/0x170
   ? btrfs_inode_flags_to_xflags+0x50/0x50
   ? iterate_extent_inodes+0x580/0x580
   ? __vmalloc_node+0x92/0xb0
   ? init_data_container+0x34/0xb0
   ? init_data_container+0x34/0xb0
   ? kvmalloc_node+0x60/0x80
   btrfs_ioctl_logical_to_ino+0x158/0x230
   btrfs_ioctl+0x205e/0x4040
   ? __might_sleep+0x71/0xe0
   ? btrfs_ioctl_get_supported_features+0x30/0x30
   ? getrusage+0x4b6/0x9c0
   ? __kasan_check_read+0x11/0x20
   ? lock_release+0xc8/0x620
   ? __might_fault+0x64/0xd0
   ? lock_acquire+0xc7/0x510
   ? lock_downgrade+0x3d0/0x3d0
   ? lockdep_hardirqs_on_prepare+0x210/0x210
   ? lockdep_hardirqs_on_prepare+0x210/0x210
   ? __kasan_check_read+0x11/0x20
   ? do_vfs_ioctl+0xfc/0x9d0
   ? ioctl_file_clone+0xe0/0xe0
   ? lock_downgrade+0x3d0/0x3d0
   ? lockdep_hardirqs_on_prepare+0x210/0x210
   ? __kasan_check_read+0x11/0x20
   ? lock_release+0xc8/0x620
   ? __task_pid_nr_ns+0xd3/0x250
   ? lock_acquire+0xc7/0x510
   ? __fget_files+0x160/0x230
   ? __fget_light+0xf2/0x110
   __x64_sys_ioctl+0xc3/0x100
   do_syscall_64+0x37/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7fd1976e2427
  Code: 00 00 90 48 8b 05 (...)
  RSP: 002b:00007fd1955e5cf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 00007fd1955e5f40 RCX: 00007fd1976e2427
  RDX: 00007fd1955e5f48 RSI: 00000000c038943b RDI: 0000000000000004
  RBP: 0000000001000000 R08: 0000000000000000 R09: 00007fd1955e6120
  R10: 0000557835366b00 R11: 0000000000000246 R12: 0000000000000004
  R13: 00007fd1955e5f48 R14: 00007fd1955e5f40 R15: 00007fd1955e5ef8
  Modules linked in:
  ---[ end trace ec8931a1c36e57be ]---

  (gdb) l *(__tree_mod_log_rewind+0x3b1)
  0xffffffff81893521 is in __tree_mod_log_rewind (fs/btrfs/ctree.c:1210).
  1205                     * the modification. as we're going backwards, we do the
  1206                     * opposite of each operation here.
  1207                     */
  1208                    switch (tm->op) {
  1209                    case MOD_LOG_KEY_REMOVE_WHILE_FREEING:
  1210                            BUG_ON(tm->slot < n);
  1211                            fallthrough;
  1212                    case MOD_LOG_KEY_REMOVE_WHILE_MOVING:
  1213                    case MOD_LOG_KEY_REMOVE:
  1214                            btrfs_set_node_key(eb, &tm->key, tm->slot);

Here's what happens to hit that BUG_ON():

1) We have one tree mod log user (through fiemap or the logical ino ioctl),
   with a sequence number of 1, so we have fs_info->tree_mod_seq == 1;

2) Another task is at ctree.c:balance_level() and we have eb X currently as
   the root of the tree, and we promote its single child, eb Y, as the new
   root.

   Then, at ctree.c:balance_level(), we call:

      tree_mod_log_insert_root(eb X, eb Y, 1);

3) At tree_mod_log_insert_root() we create tree mod log elements for each
   slot of eb X, of operation type MOD_LOG_KEY_REMOVE_WHILE_FREEING each
   with a ->logical pointing to ebX->start. These are placed in an array
   named tm_list.
   Lets assume there are N elements (N pointers in eb X);

4) Then, still at tree_mod_log_insert_root(), we create a tree mod log
   element of operation type MOD_LOG_ROOT_REPLACE, ->logical set to
   ebY->start, ->old_root.logical set to ebX->start, ->old_root.level set
   to the level of eb X and ->generation set to the generation of eb X;

5) Then tree_mod_log_insert_root() calls tree_mod_log_free_eb() with
   tm_list as argument. After that, tree_mod_log_free_eb() calls
   __tree_mod_log_insert() for each member of tm_list in reverse order,
   from highest slot in eb X, slot N - 1, to slot 0 of eb X;

6) __tree_mod_log_insert() sets the sequence number of each given tree mod
   log operation - it increments fs_info->tree_mod_seq and sets
   fs_info->tree_mod_seq as the sequence number of the given tree mod log
   operation.

   This means that for the tm_list created at tree_mod_log_insert_root(),
   the element corresponding to slot 0 of eb X has the highest sequence
   number (1 + N), and the element corresponding to the last slot has the
   lowest sequence number (2);

7) Then, after inserting tm_list's elements into the tree mod log rbtree,
   the MOD_LOG_ROOT_REPLACE element is inserted, which gets the highest
   sequence number, which is N + 2;

8) Back to ctree.c:balance_level(), we free eb X by calling
   btrfs_free_tree_block() on it. Because eb X was created in the current
   transaction, has no other references and writeback did not happen for
   it, we add it back to the free space cache/tree;

9) Later some other task T allocates the metadata extent from eb X, since
   it is marked as free space in the space cache/tree, and uses it as a
   node for some other btree;

10) The tree mod log user task calls btrfs_search_old_slot(), which calls
    get_old_root(), and finally that calls __tree_mod_log_oldest_root()
    with time_seq == 1 and eb_root == eb Y;

11) First iteration of the while loop finds the tree mod log element with
    sequence number N + 2, for the logical address of eb Y and of type
    MOD_LOG_ROOT_REPLACE;

12) Because the operation type is MOD_LOG_ROOT_REPLACE, we don't break out
    of the loop, and set root_logical to point to tm->old_root.logical
    which corresponds to the logical address of eb X;

13) On the next iteration of the while loop, the call to
    tree_mod_log_search_oldest() returns the smallest tree mod log element
    for the logical address of eb X, which has a sequence number of 2, an
    operation type of MOD_LOG_KEY_REMOVE_WHILE_FREEING and corresponds to
    the old slot N - 1 of eb X (eb X had N items in it before being freed);

14) We then break out of the while loop and return the tree mod log operation
    of type MOD_LOG_ROOT_REPLACE (eb Y), and not the one for slot N - 1 of
    eb X, to get_old_root();

15) At get_old_root(), we process the MOD_LOG_ROOT_REPLACE operation
    and set "logical" to the logical address of eb X, which was the old
    root. We then call tree_mod_log_search() passing it the logical
    address of eb X and time_seq == 1;

16) Then before calling tree_mod_log_search(), task T adds a key to eb X,
    which results in adding a tree mod log operation of type
    MOD_LOG_KEY_ADD to the tree mod log - this is done at
    ctree.c:insert_ptr() - but after adding the tree mod log operation
    and before updating the number of items in eb X from 0 to 1...

17) The task at get_old_root() calls tree_mod_log_search() and gets the
    tree mod log operation of type MOD_LOG_KEY_ADD just added by task T.
    Then it enters the following if branch:

    if (old_root && tm && tm->op != MOD_LOG_KEY_REMOVE_WHILE_FREEING) {
       (...)
    } (...)

    Calls read_tree_block() for eb X, which gets a reference on eb X but
    does not lock it - task T has it locked.
    Then it clones eb X while it has nritems set to 0 in its header, before
    task T sets nritems to 1 in eb X's header. From hereupon we use the
    clone of eb X which no other task has access to;

18) Then we call __tree_mod_log_rewind(), passing it the MOD_LOG_KEY_ADD
    mod log operation we just got from tree_mod_log_search() in the
    previous step and the cloned version of eb X;

19) At __tree_mod_log_rewind(), we set the local variable "n" to the number
    of items set in eb X's clone, which is 0. Then we enter the while loop,
    and in its first iteration we process the MOD_LOG_KEY_ADD operation,
    which just decrements "n" from 0 to (u32)-1, since "n" is declared with
    a type of u32. At the end of this iteration we call rb_next() to find the
    next tree mod log operation for eb X, that gives us the mod log operation
    of type MOD_LOG_KEY_REMOVE_WHILE_FREEING, for slot 0, with a sequence
    number of N + 1 (steps 3 to 6);

20) Then we go back to the top of the while loop and trigger the following
    BUG_ON():

        (...)
        switch (tm->op) {
        case MOD_LOG_KEY_REMOVE_WHILE_FREEING:
                 BUG_ON(tm->slot < n);
                 fallthrough;
        (...)

    Because "n" has a value of (u32)-1 (4294967295) and tm->slot is 0.

Fix this by taking a read lock on the extent buffer before cloning it at
ctree.c:get_old_root(). This should be done regardless of the extent
buffer having been freed and reused, as a concurrent task might be
modifying it (while holding a write lock on it).
Reported-by: NZygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/20210227155037.GN28049@hungrycats.org/
Fixes: 834328a8 ("Btrfs: tree mod log's old roots could still be part of the tree")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 78486cf1f31e3f646a981f91f4be3db62689265e
bugzilla: 51363

--------------------------------

commit 6980d29c upstream.

In zonefs_open_zone(), if opened zone count is larger than
.s_max_open_zones threshold, we missed to recover .i_wr_refcnt,
fix this.

Fixes: b5c00e97 ("zonefs: open/close zone on file open/close")
Cc: <stable@vger.kernel.org>
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 9c1c5e81a00250628b1dea74b815fc641ee77952
bugzilla: 51363

--------------------------------

commit 1601ea06 upstream.

The sequential write constraint of sequential zone file prevent their
use as swap files. Only allow conventional zone files to be used as swap
files.

Fixes: 8dcc1a9d ("fs: New zonefs file system")
Cc: <stable@vger.kernel.org>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit dfbdbf0f359abbe5005ee3d99d1923af904c8584
bugzilla: 51363

--------------------------------

commit ebfd68cd upstream.

zonefs updates the size of a sequential zone file inode only on
completion of direct writes. When executing asynchronous append writes
(with a file open with O_APPEND or using RWF_APPEND), the use of the
current inode size in generic_write_checks() to set an iocb offset thus
leads to unaligned write if an application issues an append write
operation with another write already being executed.

Fix this problem by introducing zonefs_write_checks() as a modified
version of generic_write_checks() using the file inode wp_offset for an
append write iocb offset. Also introduce zonefs_write_check_limits() to
replace generic_write_check_limits() call. This zonefs special helper
makes sure that the maximum file limit used is the maximum size of the
file being accessed.

Since zonefs_write_checks() already truncates the iov_iter, the calls
to iov_iter_truncate() in zonefs_file_dio_write() and
zonefs_file_buffered_write() are removed.

Fixes: 8dcc1a9d ("fs: New zonefs file system")
Cc: <stable@vger.kernel.org>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 38c74f2f2318b92082990865fd9eb2f24a5b7ec5
bugzilla: 51363

--------------------------------

commit 0b13525c upstream.

In commit 05bc1be6 ("s390/pci: create zPCI bus") we removed the
pci_dev_put() call matching the earlier pci_get_slot() done as part of
__zpci_event_availability(). This was based on the wrong understanding
that the device_put() done as part of pci_destroy_device() would counter
the pci_get_slot() when it only counters the initial reference. This
same understanding and existing bad example also lead to not doing
a pci_dev_put() in zpci_remove_device().

Since releasing the PCI devices, unlike releasing the PCI slot, does not
print any debug message for testing I added one in pci_release_dev().
This revealed that we are indeed leaking the PCI device on PCI
hotunplug. Further testing also revealed another missing pci_dev_put() in
disable_slot().

Fix this by adding the missing pci_dev_put() in disable_slot() and fix
zpci_remove_device() with the correct pci_dev_put() calls. Also instead
of calling pci_get_slot() in __zpci_event_availability() to determine if
a PCI device is registered and then doing the same again in
zpci_remove_device() do this once in zpci_remove_device() which makes
sure that the pdev in __zpci_event_availability() is only used for the
result of pci_scan_single_device() which does not need a reference count
decremnt as its ownership goes to the PCI bus.

Also move the check if zdev->zbus->bus is set into zpci_remove_device()
since it may be that we're removing a device with devfn != 0 which never
had a PCI bus. So we can still set the pdev->error_state to indicate
that the device is not usable anymore, add a flag to set the error state.

Fixes: 05bc1be6 ("s390/pci: create zPCI bus")
Cc: <stable@vger.kernel.org> # 5.8+: e1bff843 s390/pci: remove superfluous zdev->zbus check
Cc: <stable@vger.kernel.org> # 5.8+: ba764dd7 s390/pci: refactor zpci_create_device()
Cc: <stable@vger.kernel.org> # 5.8+
Reviewed-by: NMatthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: NNiklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: NHeiko Carstens <hca@linux.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.26
commit 075e3034740cb1910aa857e91f4010bfa2d89652
bugzilla: 51363

--------------------------------

commit e1bff843 upstream.

Checking zdev->zbus for NULL in __zpci_event_availability() is
superfluous as it can never be NULL at this point. While harmless this
check causes smatch warnings because we later access zdev->zbus with
only having checked zdev != NULL which is sufficient.

The reason zdev->zbus can never be NULL is since with zdev != NULL given
we know the zdev came from get_zdev_by_fid() and thus the zpci_list.
Now on first glance at zpci_create_device() one may assume that there is
a window where the zdev is in the list without a zdev, however this
window can't overlap with __zpci_event_availability() as
zpci_create_device() either runs on the same kthread as part of
availability events, or during the initial CLP List PCI at which point
the __zpci_event_availability() is not yet called as zPCI is not yet
initialized.
Reported-by: Nkernel test robot <lkp@intel.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NNiklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: NVasily Gorbik <gor@linux.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>