The patch 'irqchip/gic-v3-its: Balance initial LPI affinity across CPUs'
set the IRQ to an uncentain CPU. If an IRQ is bound to the CPU used by the
thread which is sending request, the throughput will be just half.

So allocate a 'work_queue' and set as 'WQ_UNBOUND' to do the back half work
on some different CPUS.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZaibo Xu <xuzaibo@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since 'qm_create_debugfs_file' always returns 0, change it as 'void'.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The 'qm->curr_qm_qp_num' is not initialized, which will result in failure
to write the current_q file.
Signed-off-by: NSihang Chen <chensihang1@hisilicon.com>
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

ZIP debug registers aren't cleared even if its driver is removed,
so add a clearing operation when remove driver.
Signed-off-by: NHao Fang <fanghao11@huawei.com>
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The parameter type of 'pci_set_drvdata' is 'struct hisi_qm',
so here the return type of 'pci_get_drvdata' should be 'struct hisi_qm'
too.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In order to pass kernel CRYPTO test, ZIP module parameter
'pf_q_num' needs to be set as greater than 1.
Signed-off-by: NLongfang Liu <liulongfang@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

1.Unified alignment styles
2.Remove unnecessary goto branch
3.Remove address printf
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Supplement some comments.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add print for some error branches.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Replace 'sprintf' with 'scnprintf' to avoid overrun.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Update debugfs interface parameters
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

1.Add prefix 'HZIP' for some macros
2.Add prefix 'hisi_zip' for some functions
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

1.Remove the macro 'HZIP_VF_NUM'.
2.Remove 'list' of the struct 'hisi_zip'
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When the devices are removed or not existing, the corresponding algorithms
which are registered by 'hisi-zip' driver can't be used.

Move 'hisi_zip_register_to_crypto' from 'hisi_zip_init' to
'hisi_zip_probe'. The algorithms will be registered to crypto only when
there is device bind on the driver. And when the devices are removed,
the algorithms will be unregistered.

In the previous process, the function 'xxx_register_to_crypto' need a lock
and a static variable to judge if the registration is the first time.
Move this action into the function 'hisi_qm_alg_register'. Each device
will call 'hisi_qm_alg_register' to add itself to qm list in probe process
and registering algs when the qm list is empty.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Call trace will appear in the Hisilicon crypto driver unbinding or
disabling SRIOV during task running with TFMs on the corresponding
function.
The log looks like this:
	[  293.908078] Call trace:
	[  293.908080]  __queue_work+0x494/0x548
	[  293.908081]  queue_work_on+0x84/0xd8
	[  293.908092]  qm_irq+0x4c/0xd0 [hisi_qm]
	[  293.908096]  __handle_irq_event_percpu+0x74/0x2a0
	[  293.908098]  handle_irq_event_percpu+0x40/0x98
	[  293.908099]  handle_irq_event+0x4c/0x80
	[  293.908101]  handle_fasteoi_irq+0xb0/0x170
	[  293.908102]  generic_handle_irq+0x3c/0x58
	[  293.908103]  __handle_domain_irq+0x68/0xc0
	[  293.908104]  gic_handle_irq+0xb4/0x298
	[  293.908105]  el1_irq+0xcc/0x180
	[  293.908107]  arch_cpu_idle+0x38/0x228
	[  293.908110]  default_idle_call+0x20/0x40
	[  293.908113]  do_idle+0x1cc/0x2b8
	[  293.908114]  cpu_startup_entry+0x2c/0x30
	[  293.908115]  rest_init+0xdc/0xe8
	[  293.908117]  arch_call_rest_init+0x14/0x1c
	[  293.908117]  start_kernel+0x490/0x4c4

This patch adds a waiting logic as user doing the above two operations
to avoid panic. The two operations will hold on in the driver
remove function until the tasks release all their relative TFMs.
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since the drivers such as HPRE/SEC/ZIP do not implement
'pci_driver.shutdow', a RAS will be triggered at OS rebooting or shutting
down as the hardware device is processing request.
The log looks like this:
	NOTICE:  [NimbusSecNodeType1]:[2372L]This is sec, Base = 0x141800000
	NOTICE:  [NimbusSecHandle]:[2319L] SecIntSt = 0x3
	NOTICE:  [NimbusSecHandle]:[2320L] SecQmIntStatus = 0x2
	NOTICE:  [PrintSecurityType]:[344L] SecurityType is RECOVERABLE!

This patch offers a new API in qm to shutdown devices, and add shutdown
callbacks in ACC driver based on this new API.

So the running devices will be stopped when the OS reboot or shutdown.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now, there are three reasons of stopping: 'NORMAL', 'SOFT_RESET' and 'FLR'.
In order to keep this, explicitly pass the stop reason as an input
parameter of 'hisi_qm_stop' function.

Fixes: b67202e8("crypto: hisilicon/qm - add state machine for QM")
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If users don't specify NUMA node, the driver will use the ZIP module near
the CPU allocating acomp. Otherwise, it uses the ZIP module according to
the requirement of users.

Cc: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NBarry Song <song.bao.hua@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In order to be compatible with devices of different versions, V1 in the
accelerator driver is now isolated, and other versions are the previous
V2 processing flow.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add dump information of SQC/CQC/EQC/AEQC/SQE/CQE/EQE/AEQE.
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Hisilicon ZIP engine driver uses debugfs
to provides IO operation debug information
Signed-off-by: NLongfang Liu <liulongfang@huawei.com>
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZaibo Xu <xuzaibo@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The hardware device can be configured to report directly through MSI, but
this method will not go through RAS, configure all hardware errors that
should be processed by driver to NFE.
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some initial value assignment of struct hisi_qm could put into QM.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The codes related use_dma_api is useless which should be removed.
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add callback reset_prepare and reset_done in QM, The callback
reset_prepare will uninit device error configuration and stop
the QM, the callback reset_done will init the device error
configuration and restart the QM.

Uninit the error configuration will disable device block master OOO
when Multi-bit ECC error occurs to avoid the request of FLR will not
return.
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

put q_num_set similar code into qm to reduce the redundancy.
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Misc fixes on coding style:
1.Merge QM initialization code into a function
2.Merge QM's PF and VF initialization into a function
Signed-off-by: NLongfang Liu <liulongfang@huawei.com>
Signed-off-by: NZaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

hzip_dfx_regs is never changed and can be made const.

This allows the compiler to put it in the text section instead of the
data section.

Before:
   text    data     bss     dec     hex filename
  15236    6160     480   21876    5574 drivers/crypto/hisilicon/zip/zip_main.o

After:
   text    data     bss     dec     hex filename
  15620    5776     480   21876    5574 drivers/crypto/hisilicon/zip/zip_main.o
Signed-off-by: NRikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Register controller reset handle with PCIe AER.
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: NZaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The vfs_num module parameter has been used in zip driver, this patch adds
this for HPRE and SEC driver.
Signed-off-by: NHao Fang <fanghao11@huawei.com>
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: NZaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Clean the duplicate SR-IOV related codes, put all into qm.c.
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: NZaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We plan to move vfs_num related code into qm.c, put the param
vfs_num into struct hisi_qm first.
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: NZaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Encapsulate hisi_qm_alloc_qps_node() to new interface to replace
find_zip_device(), which will fix the bug of creating QP failure
especially in multi-thread scenario.
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: NZaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Register qm to uacce framework for user crypto driver
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove the module_param uacce_mode, which is not used currently.
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In error detect process, a lot of duplicate code can put into qm. We add
two callback(get_dev_hw_err_status and log_dev_hw_err) into struct
hisi_qm_err_ini to handle device error detect, meanwhile the qm error
detect not changed.
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Signed-off-by: NZaibo Xu <xuzaibo@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Configure zip RAS error type in error handle initialization,
Where ECC 1bit is configured as CE error, others are NFE.
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The initialization and uninitialization of zip/hpre/sec/qm hardware error
is processed in respective drivers, which could be unified into qm.c. We
add struct hisi_qm_err_ini into struct hisi_qm, which involve all error
handlers of device and assignment should be done in driver probe.
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Signed-off-by: NZaibo Xu <xuzaibo@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently the VF can be enabled only through sysfs interface
after module loaded, but this also needs to be done when the
module loaded in some scenarios.

This patch adds module param vfs_num, adds hisi_zip_sriov_enable()
in probe, and also adjusts the position of probe.
Signed-off-by: NHao Fang <fanghao11@huawei.com>
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>