Fix various typos in documentation txts.
Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for the Asus Xonar Essence ST and its daughterboard.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Sound Blaster X-Fi driver supports Creative solutions based on
20K1 and 20K2 chipsets.

Supported hardware :

Creative Sound Blaster X-Fi Titanium Fatal1ty® Champion Series
Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series
Creative Sound Blaster X-Fi Titanium Professional Audio
Creative Sound Blaster X-Fi Titanium
Creative Sound Blaster X-Fi Elite Pro
Creative Sound Blaster X-Fi Platinum
Creative Sound Blaster X-Fi Fatal1ty
Creative Sound Blaster X-Fi XtremeGamer
Creative Sound Blaster X-Fi XtremeMusic

Current release features:

* ALSA PCM Playback
* ALSA Record
* ALSA Mixer

Note:

* External I/O modules detection not included.
Signed-off-by: NWai Yew CHAY <wychay@ctl.creative.com>
Singed-off-by: NRyan RICHARDS <ryan_richards@creativelabs.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the support for ESI Maya44 board to ice1724 driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add module parameter to enable or disable
joystick port (gameport) on the SC6600 and
later cards.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for the Asus Xonar Essence STX sound card.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Updated; removal of snd-cs4232 entry.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Update documentation regarding codec probing; the new probe_only option
and the new probe_mask usage.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added probe_only module option to hd-audio driver.
This option specifies whether the driver creates and initializes the
codec-parser after probing.  When this option is set, the driver skips
the codec parsing and initialization but gives you proc and other
accesses.  It's useful to see the initial codec state for debugging.

The default of this value is off, so the default behavior is as same
as before.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Split the list of model option values to a separate file,
HD-Audio-Models.txt, from ALSA-Configuration.txt.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the model without the jack-detection for some desktops that
have really no jack-detection.  The recent driver caused regressions
regarding the sound output on such machines.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some desktops seems to have no HP/mic jack detection on the front panel,
which results in the silent output in the recent driver, because the
driver mutes the output (to save power) when no plug is detected.

This patch adds a new model that disables the jack-detection.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Updated the information about bug-reporting for HD-audio.
Mentioned alsa-info.sh and kernel bugzilla.  Removed ALSA BTS address
not to flood the unhandled reports any more.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for the HT-Omega Claro halo (XT).
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Check the model type instead of PCI SSID for detection of the mic types
on Dell laptops with IDT 92HD73xx codecs.  In this way, a new laptop
can be tested via model module option.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch fixes the bug 0004240: ALC888 - Intel HDA - Headphone Controlling.
It is made against the 2008-11-23 snapshot.

Added Realtek ALC888 model entry for the Fujitsu-Siemens Amilo Xa3530
laptop. It has 4 jacks: HP out, Mic-in, Line-in and Line-out/Side/SPDIF
(this one is on the laptop side, the other ones are on the rear).

Model detection works.
Headphone jack sense works now.
Front mic works now, was same as Acer Aspire 4930G.
Added channel mode from 2 to 8 channels.

In 2ch and 4ch modes, the front is also sent to the Line-out/side jack
for convenience instead of just muting the Line-out/side jack like other
models do.

When using the Mic-in jack as CLFE, the sound is very low (bug?). To
work it around, in 6ch mode the CLFE channel is duplicated to the
Line-out/side jack because this one has a better amp.

Cc: manu@frogged.de
Signed-off-by: NVincent Petry <PVince81@yahoo.fr>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added STAC_DELL_M4_3 quirk for Dell systems, also reorganized the
board config switch to assign number of digital muxes, microphones,
and SPDIF muxes via the PCI quirk defined.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The changes specific for Samsung laptops seem unapplicable to other
hardware models like ASUS.  The mic inputs are lost on such hardware
by the change 5d5d5f43.

This patch adds back the old laptop-eapd model, and create a new
model "samsung" for the new one specific to Samsung laptops with
automatic mic selection feature.

Reference: kernel bugzilla #12070
	http://bugzilla.kernel.org/show_bug.cgi?id=12070Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added Realtek ALC888 model entry for the Acer Aspire 4930G laptop that
fixes the following features:
- internal microphone
- heaphone jack sense
- channel mode
Signed-off-by: NVincent Petry <PVince81@yahoo.fr>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There are actually two variants of ALC268 Acer implementation, one
with an analog built-in mic (pin 0x19) and another with a digital
mic (pin 0x12).  Created a new model, acer-dmic, for the latter case
now.

So far, all known models are assigned to be analog-mic, according to
the BIOS setup.  If this doesn't match with the actual case, one needs
to try model=acer-dmic, and fix the entry to point ALC268_ACER_DMIC
if it works.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Asus V1s series laptops have an ALC660VD with PCI id: 0x1043, 0x1633.
1.) remove the previous behaviour of mapping that to the ALC861VD_LENOVO
    device.
2.) add a new ALC660VD_V1S device based on ALC861VD_LENOVO, with an
    added digital out.
Signed-off-by: NTristan Aston <astrotris@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a preset model for FSC Amilo with ALC269 codec chip.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for the Asus Xonar HDAV1.3 and the Xonar HDAV1.3 Deluxe.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

As noted by Gu Rui in http://bugzilla.kernel.org/show_bug.cgi?id=11444,
there is a typo in Documentation/sound/alsa/ALSA-Configuration.txt.
After checking the source (sound/pci/hda/hda_intel.c), the report
looks correct to me.
Signed-off-by: NMichael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added the support of Toshiba RX1 laptop with ALC262 codec chip.
Related ALSA bug#3386:
    https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3386Signed-off-by: NHiroshi Miura <miurahr@acm.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added the descriptions of missing model values.
Also, fixed the model strings of a few new models to a standard style.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added the basic support of AD1882A codec chip.
It's almost compatible with AD1882, but with a digital mic and some
differences in connections.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added the ignore_ctl_error parameter to enable/disable the control-error
handling for mixer interfaces.  It was a hard-coded ifdef, and now you
can change it more easily.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added the missing description of module parameters of usb-audio driver
to ALSA-Configuration.txt.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Add support for the Asus Xonar D1.  It is the same as the DX, but
without the external power detection.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALSA-Configuration.txt: supported cards update
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Currently, even if you pass model=intel-mac-v3 as a module parameter to
snd_hda_intel, the function patch_stac922x (patch_sigmatel.c) will still
try to auto-detect the model type. This is a problem on my MacBook Pro 1st
generation, which needs intel-mac-v3, but sometimes incorrectly reports
0x00000100 as subsystem id, which causes the switch in patch_stac922x to
select intel-mac-v4.

To fix this, I added a new model called intel-mac-auto, so in case no
module parameter is passed, and an Intel Mac board is detected, the
model will be automatically detected, while no detection will be done
if the model is forced to intel-mac-v3.

This problem has been around for quite a while, and I used to fix it
by moving the case statement for 0x00000100 in patch_stac922x so that
intel-mac-v3 is chosen.

Another way to fix the problem would be to check if a module parameter
was set directly in patch_stac922x, using something like this:
if (spec->board_config == STAC_INTEL_MAC_V3 &&
	!codec->bus->modelname) {

But I think it is less elegant (if you prefer that way, I can prepare a
patch).
Signed-off-by: NNicolas Boichat <nicolas@boichat.ch>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a brief description of the new bdl_pos_adj option to
ALSA-Configuration.txt.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

position_fix=3 is the option to correct the DMA position with the
FIFO size.  But, it never worked correctly, and we have now more other
workarounds for the DMA position fixes.  Thus better to remove it.

Also, change POS_FIX_NONE to POS_FIX_LPIB to represent its real role
better.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Fix and improve the slots option handling.  The sound core tries to
find the slot with the given module name first and assign if it's
still available.  If all pre-given slots are unavailable, then try
to find another free slot.

Also, when a module name begins with '!', it means the negative match:
the slot will be given for any modules but that one.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>