提交 7a9b8063 编写于 作者: T Takashi Iwai 提交者: Jaroslav Kysela

ALSA: usb-audio - Add ignore_ctl_error parameter

Added the ignore_ctl_error parameter to enable/disable the control-error
handling for mixer interfaces.  It was a hard-coded ifdef, and now you
can change it more easily.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
上级 8a8f2662
......@@ -1983,6 +1983,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
device_setup - Device specific magic number (optional)
- Influence depends on the device
- Default: 0x0000
ignore_ctl_error - Ignore any USB-controller regarding mixer
interface (default: no)
This module supports multiple devices, autoprobe and hotplugging.
......@@ -1991,6 +1993,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
check.
NB: async_unlink=0 would cause Oops. It remains just for
debugging purpose (if any).
NB: ignore_ctl_error=1 may help when you get an error at accessing
the mixer element such as URB error -22. This happens on some
buggy USB device or the controller.
Module snd-usb-caiaq
--------------------
......
......@@ -71,6 +71,7 @@ static int pid[SNDRV_CARDS] = { [0 ... (SNDRV_CARDS-1)] = -1 };
static int nrpacks = 8; /* max. number of packets per urb */
static int async_unlink = 1;
static int device_setup[SNDRV_CARDS]; /* device parameter for this card*/
static int ignore_ctl_error;
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for the USB audio adapter.");
......@@ -88,7 +89,9 @@ module_param(async_unlink, bool, 0444);
MODULE_PARM_DESC(async_unlink, "Use async unlink mode.");
module_param_array(device_setup, int, NULL, 0444);
MODULE_PARM_DESC(device_setup, "Specific device setup (if needed).");
module_param(ignore_ctl_error, bool, 0444);
MODULE_PARM_DESC(ignore_ctl_error,
"Ignore errors from USB controller for mixer interfaces.");
/*
* debug the h/w constraints
......@@ -3633,7 +3636,7 @@ static void *snd_usb_audio_probe(struct usb_device *dev,
if (err > 0) {
/* create normal USB audio interfaces */
if (snd_usb_create_streams(chip, ifnum) < 0 ||
snd_usb_create_mixer(chip, ifnum) < 0) {
snd_usb_create_mixer(chip, ifnum, ignore_ctl_error) < 0) {
goto __error;
}
}
......
......@@ -223,7 +223,8 @@ int snd_usb_ctl_msg(struct usb_device *dev, unsigned int pipe,
__u8 request, __u8 requesttype, __u16 value, __u16 index,
void *data, __u16 size, int timeout);
int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif);
int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif,
int ignore_error);
void snd_usb_mixer_disconnect(struct list_head *p);
int snd_usb_create_midi_interface(struct snd_usb_audio *chip, struct usb_interface *iface,
......
......@@ -2014,7 +2014,8 @@ static void snd_audigy2nx_proc_read(struct snd_info_entry *entry,
}
}
int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif)
int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif,
int ignore_error)
{
static struct snd_device_ops dev_ops = {
.dev_free = snd_usb_mixer_dev_free
......@@ -2029,9 +2030,7 @@ int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif)
return -ENOMEM;
mixer->chip = chip;
mixer->ctrlif = ctrlif;
#ifdef IGNORE_CTL_ERROR
mixer->ignore_ctl_error = 1;
#endif
mixer->ignore_ctl_error = ignore_error;
mixer->id_elems = kcalloc(256, sizeof(*mixer->id_elems), GFP_KERNEL);
if (!mixer->id_elems) {
kfree(mixer);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册