Add PCIe RC support for AM654x Platforms in pci-keystone.c
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

hook_fault_code() is an ARM32 specific API for hooking into data abort.

AM65X platforms (that integrate ARM v8 cores and select CONFIG_ARM64 as
arch) rely on pci-keystone.c but on them the enumeration of a
non-present BDF does not trigger a bus error, so the fixup exception
provided by calling hook_fault_code() is not needed and can be guarded
with CONFIG_ARM.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Explicitly set the PCIe mode to BOOTCFG_DEVCFG instead of always
relying on the default values. This is required when EP mode has to
be explicitly written to BOOTCFG_DEVCFG register.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Move platform_get_resource() calls for resources that are applicable to
both host and endpoint mode (ie "dbics" and "app") from
ks_add_pcie_port() to the probe() callback, in preparation for adding
endpoint support to pci-keystone driver.

No functional change intended.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Use platform_get_resource_byname() instead of platform_get_resource()
which uses an index to get memory resources. While at that get the memory
resource defined specifically for configuration space instead of
deriving the configuration space address from dbics address space.

Since the pci-keystone driver has never worked in the mainline kernel,
DT backward compatibility is not an issue.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Instead of having two functions
ks_pcie_add_pcie_port() and ks_pcie_dw_host_init() for initializing
host, have a single function to perform all the host initialization.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

pci-keystone driver uses irq_of_parse_and_map() to get irq number of
error_irq.

Use platform_get_irq() instead and move platform_get_irq() and
request_irq() of error_irq from ks_pcie_add_pcie_port to ks_pcie_probe
since error_irq is common to both RC mode and EP mode.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Add start_link()/stop_link() dw_pcie_ops and invoke ks_pcie_start_link()
directly from host_init. start_link()/stop_link() ops are required for
adding EP mode support.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Use Keystone specific msi_irq_chip to configure the MSI controller
logic in the PCIe keystone wrapper instead of using the default
Designware msi_irq chip (dw_pci_msi_bottom_irq_chip) with
callback functions for configuring the Keystone MSI controller.
This will help to remove Keystone specific callback functions
added in dw_pcie_host_ops.

Move the default msi_irq_chip assignment to dw_pcie_host_init since
platforms that doesn't use the default msi_irq_chip will assign
msi_irq_chip in the msi_host_init() callback.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

ks_pcie_msi_irq_handler() invokes ks_pcie_handle_msi_irq() for handling
the interrupts.

Having two functions for handling the interrupt was used when keystone
PCIe driver was implemented using two files but with commit b492aca3
("PCI: keystone: Merge pci-keystone-dw.c and pci-keystone.c"), which
merged the keystone PCIe driver to use a single file, two functions for
handling the interrupt handler are not required.

Handle MSI interrupt in a single interrupt handler here.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

ks_pcie_msi_irq_handler() uses 'virq' to get the IRQ number offset.
This offset is used to get the correct MSI_IRQ_STATUS register
corresponding to the IRQ line that raised the interrupt.

There is no guarantee that 'virq' assigned for consecutive hardware
IRQ will be contiguous and this might get us an incorrect IRQ number
offset.

Fix it here by using 'hwirq' to get the IRQ number offset. Since we
don't store the 'virq' numbers of all the IRQ numbers, stop checking
if irq count is greater than MAX_MSI_HOST_IRQS and remove
MAX_MSI_HOST_IRQS.

Link: https://lkml.kernel.org/r/bb081d21-7c03-0357-4294-7e92d95d838c@arm.comSigned-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

ks_pcie_get_irq_controller_info() is used to configure both MSI and
legacy interrupt. This will prevent MSI or legacy interrupt specific
intializations. Add separate functions to configure MSI and legacy
interrupts.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Change both MSI interrupt and legacy interrupt
related macros to take an additional argument in order to return the
correct register offset.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Cleanup macros defined in pci-keystone.c
by removing unused macros, grouping the macros and aligning
it properly.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Reorder header file in alphabetical order.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

commit 025dd3da ("PCI: keystone: Add error IRQ
handler") added dev_err() message only for ERR_AXI and ERR_FATAL. Add
debug error message for ERR_SYS, ERR_NONFATAL, ERR_CORR and ERR_AER here.

While at that avoid using ERR_IRQ_STATUS_RAW and use ERR_IRQ_STATUS
instead.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Use ERR_IRQ_STATUS instead of ERR_IRQ_STATUS_RAW to get interrupt
status. ERR_IRQ_STATUS_RAW has the status of the interrupts
before masking whereas ERR_IRQ_STATUS has the status of the interrupts
after masking. Since all the interrupts are unmasked here, use
ERR_IRQ_STATUS.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

ks_pcie_link_up() uses registers from the designware core to get the
status of the link. Move the register defines to pcie-designware.h
and cleanup ks_pcie_link_up().
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Use BIT() macro for DBI_CS2 and cleanup
set_dbi_mode() and get_dbi_mode().
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Outbound translation window is configured in order to access the
PCIe card's MEM space. Cleanup outbound translation configuration
here by using BIT() macros, adding a macro for window size and
using lower_32_bits/upper_32_bits macros for configuring the 64 bit
offset in the outbound translation region.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Instead of having a fixed outbound window count, get the number of
outbound windows from the device tree.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Cleanup configuration space access by removing ks_pcie_cfg_setup()
which has an unncessary check of "if (bus == 0)" which will never be the
case of *_other_conf() and adding macros for configuring the CFG_SETUP
register required for accessing the configuration space of the device.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Invoke runtime PM APIs to enable clocks and remove explicit
clock enabling using clk_prepare_enable().
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Cleanup PHY handling by using devm_phy_optional_get() to get PHYs if
the PHYs are optional, creating a device link between the PHY device
and the controller device and disable PHY on error cases here.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Control module registers should be read using syscon APIs.
pci-keystone.c uses platform_get_resource() to get control module registers.
Fix it here by using syscon APIs to get device id from control module.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Some function names begin with ks_dw_pcie_*
and some function names begin with ks_pcie_*. Modify it so that
all function names begin with ks_pcie_*.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Remove redundant platform_set_drvdata() invocation
in ks_pcie_probe().
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Having two different files for keystone PCI driver
doesn't serve any purpose. Merge pci-keystone-dw.c and pci-keystone.c
into a single pci-keystone.c file and remove pci-keystone.h.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Remove unused "msi_intc_np" argument from
ks_dw_pcie_host_init().
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

commit 886bc5ce ("PCI: designware: Add generic
dw_pcie_wait_for_link()") while adding a generic dw_pcie_wait_for_link()
performed a special handling (initiate link training multiple times) for
keystone which is not required. This also resulted in unncessarily waiting
for more time to establish the link even when no PCI device is connected.

Remove it and make it look similar to other dwc based PCIe drivers.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Move dw_pcie_setup_rc() out of
ks_pcie_establish_link() so that ks_pcie_establish_linki() can be used only
to start the link.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Reuse the already existing quirk to set MRRS for PCI host bridge
instead of explicitly setting MRRS in ks_pcie_host_init().
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

PCI controller in K2G also has a limitation that memory read request
size (MRRS) must not exceed 256 bytes. Use the quirk to limit MRRS
(added for K2HK, K2L and K2E) for K2G as well.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Function dw_pcie_host_init() already initializes the root_bus_nr field
of 'struct pcie_port', so the -1 assignment prior to calling
dw_pcie_host_init() in platform specific driver is not really needed.
Drop it.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>

Native PCI drivers for root complex devices were originally all in
drivers/pci/host/.  Some of these devices can also be operated in endpoint
mode.  Drivers for endpoint mode didn't seem to fit in the "host"
directory, so we put both the root complex and endpoint drivers in
per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc.

These per-device directories contain trivial Kconfig and Makefiles and
clutter drivers/pci/.  Make a new drivers/pci/controllers/ directory and
collect all the device-specific drivers there.

No functional change intended.

Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.comSigned-off-by: NShawn Lin <shawn.lin@rock-chips.com>
[bhelgaas: changelog]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The "Link already up" message does not indicate any error, so
change it to dev_info() level instead.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NMurali Karicheri <m-karicheri2@ti.com>

Implement a multiplexed IRQ domain hierarchy API in the pcie-designware
host bridge driver that funnels all MSI IRQs into a single parent
interrupt, moving away from the obsolete struct msi_controller based
API.

Although the old implementation API is still available, pcie-designware
will now use the multiplexed IRQ domains hierarchical API.

Remove all existing dwc based host bridges MSI IRQs handlers, in that the
hierarchical API now handles MSI IRQs through the hierarchical/chained
MSI domain implementation.
Signed-off-by: NGustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: NNiklas Cassel <niklas.cassel@axis.com>
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NJingoo Han <jingoohan1@gmail.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>

Add SPDX GPL-2.0 to all PCI files that specified the GPL version 2 license.

Remove the boilerplate GPL version 2 language, relying on the assertion in
b2441318 ("License cleanup: add SPDX GPL-2.0 license identifier to
files with no license") that the SPDX identifier may be used instead of the
full boilerplate text.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix child-node lookup during initialisation which was using the wrong
OF-helper and ended up searching the whole device tree depth-first
starting at the parent rather than just matching on its children.

To make things worse, the parent pci node could end up being prematurely
freed as of_find_node_by_name() drops a reference to its first argument.
Any matching child interrupt-controller node was also leaked.

Fixes: 0c4ffcfe ("PCI: keystone: Add TI Keystone PCIe driver")
Cc: stable <stable@vger.kernel.org>     # 3.18
Acked-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NJohan Hovold <johan@kernel.org>
[lorenzo.pieralisi@arm.com: updated commit subject]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Switch from using custom MAX_LEGACY_IRQS and MAX_LEGACY_HOST_IRQS macros to
the generic PCI_NUM_INTX definition for the number of INTx interrupts.
Based-on-similar-patches-by: NPaul Burton <paul.burton@imgtec.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>