Correct the TCS config by updating the number of TCSes for each type.

Cc: devicetree@vger.kernel.org
Fixes: d8cf9372 ("arm64: dts: qcom: sm8150: Add apps shared nodes")
Signed-off-by: NMaulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1641749107-31979-2-git-send-email-quic_mkshah@quicinc.com

On IPQ8074, 4MB of memory is needed for TZ. So mark that region
as reserved.
Signed-off-by: NKathiravan T <quic_kathirav@quicinc.com>
[bjorn: Squash with existing reserved-memory node]
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1641560078-860-1-git-send-email-quic_kathirav@quicinc.com

IPQ8074 uses SMEM like other modern QCA SoC-s, so since its already
supported by the kernel add the required DT nodes.
Signed-off-by: NRobert Marko <robimarko@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220106212512.1970828-1-robimarko@gmail.com

Add LMh nodes for cpu cluster0 and cpu cluster1 for sm8150 SoC.
Signed-off-by: NThara Gopinath <thara.gopinath@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220106173138.411097-3-thara.gopinath@linaro.org

Fixes: bd943653 ("arm64: dts: qcom: Add device tree for Samsung J5 2015 (samsung-j5)")
Signed-off-by: NPetr Vorel <petr.vorel@gmail.com>
Reviewed-by: NStephan Gerhold <stephan@gerhold.net>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211231213635.116324-1-petr.vorel@gmail.com

This reverts commit c23f1b77.

The SM6125_VDDCX constant was replaced with 0 temporarily as the header
patch defining this constant resided in a different branch, creating an
unwanted dependency of the dts branch on the drivers branch.
Now (by the time this patch will be applied) that both branches have
been merged upstream, it is safe to revert to the constant again.
Signed-off-by: NMarijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211229220117.293542-1-marijn.suijten@somainline.org

qcom,init-seq registers are in pairs
Signed-off-by: NDavid Heidelberg <david@ixit.cz>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211229193731.72690-1-david@ixit.cz

WLED is used for controlling the display backlight on this phone, so
configure the node and enable it.
Signed-off-by: NLuca Weiss <luca.weiss@fairphone.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211229170358.2457006-5-luca.weiss@fairphone.com

WLED is used for controlling the backlight on some boards, add the node
for it.
Signed-off-by: NLuca Weiss <luca.weiss@fairphone.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211229170358.2457006-4-luca.weiss@fairphone.com

Follow common pattern for this device, first specific
and then generic compatible.
Signed-off-by: NDavid Heidelberg <david@ixit.cz>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211227215238.113956-1-david@ixit.cz

Add the generic 'max-link-speed' property to describe the IPQ6018 PCIe
link generation limit. This allows the generic dwc code to configure the
link speed correctly.
Signed-off-by: NBaruch Siach <baruch.siach@siklu.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/fcf41277cf8529437374a5c10b2b1fcad30cd7c2.1640587131.git.baruch@tkos.co.il

Signed-off-by: NPetr Vorel <petr.vorel@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211223083153.22435-3-petr.vorel@gmail.com

Signed-off-by: NPetr Vorel <petr.vorel@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211223083153.22435-2-petr.vorel@gmail.com

The change adds SM8250 cpufreq-epss controller interrupts for each
CPU core cluster.
Signed-off-by: NVladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211223075640.2924569-1-vladimir.zapolskiy@linaro.org

dt-schema expect to have fallback compatible, which is now in-place.

Fixes warning generated by `make qcom/sdm845-oneplus-fajita.dtb`:
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: power-controller@c300000: compatible: ['qcom,sdm845-aoss-qmp'] is too short
        From schema: Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
Signed-off-by: NDavid Heidelberg <david@ixit.cz>
Komu: David Heidelberg <david@ixit.cz>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211220211443.106754-1-david@ixit.cz

QCOM BAM parses property `qcom,controlled-remotely` as a boolean,
adjust dts to reflect that.

Discovered while converting text documentation into yaml format.
Signed-off-by: NDavid Heidelberg <david@ixit.cz>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211220145526.49102-1-david@ixit.cz

The msm8998 cache nodes have some issues. First, L1 caches are described
within cpu nodes, not as separate nodes. The 'next-level-cache' property
is of course in the correct location, otherwise the cache hierarchy
walking would not work. Remove all the L1 cache nodes.

Second, 'arm,arch-cache' is not a documented compatible string. "cache"
is a sufficient compatible string for the Arm architected caches.
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211217211136.3536443-1-robh@kernel.org

Since commit d0a6ce59 ("arm64: dts: qcom: sm8150: Add support for
SONY Xperia 1 / 5 (Kumano platform)"), we can directly refer to pwrkey
and resin by their new labels, respectively pon_pwrkey and pon_resin.

Simplify microsof surface duo DTS by utilizing the new labels.
Signed-off-by: NFelipe Balbi <felipe.balbi@microsoft.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211217124546.1192281-1-balbi@kernel.org

By listing relevant DMA channels for the various QUPv3 instances, we
can work on adding support for DMA to the respective drivers.
Signed-off-by: NFelipe Balbi <felipe.balbi@microsoft.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211216124348.370059-1-balbi@kernel.org

Pure effort to avoid `make dtbs_check` warnings about memory@ nodes, which
should have property device_type set to memory.

Fixes warnings as:
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: memory@f5b00000: 'device_type' is a required property
        From schema: dtschema/schemas/memory.yaml
Signed-off-by: NDavid Heidelberg <david@ixit.cz>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214234648.23369-1-david@ixit.cz

Replace (unused) enable-gpio binding with schema-defined wake-gpios. The
GPIO line is still unused, but at least we'd follow the defined schema.

While we are at it, change perst-gpio property to follow the preferred
naming schema (perst-gpios).

Fixes: 13e948a3 ("arm64: dts: qcom: sm8250: Commonize PCIe pins")
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: NDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214231448.2044987-1-dmitry.baryshkov@linaro.org

qcom,apq8016-sbc-sndcard is now covered by the qcom,sm8250.yaml schema
which has slightly different recommendations for the naming of
properties and nodes. The old naming is still functional but
deprecated. Update the &sound node in apq8016-sbc to fix the following
dtbs_check warnings:

  apq8016-sbc.dt.yaml: sound@7702000: 'model' is a required property
    From schema: sound/qcom,sm8250.yaml
  apq8016-sbc.dt.yaml: sound@7702000: 'external-dai-link@0', ...
    do not match any of the regexes: '.*-dai-link$', ...
    From schema: sound/qcom,sm8250.yaml

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NStephan Gerhold <stephan@gerhold.net>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214135124.2380-1-stephan@gerhold.net

Rename thermal zones according to dt-schema.
Fixes multiple `make dtbs_check` warnings about name convetion.
Signed-off-by: NDavid Heidelberg <david@ixit.cz>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214132750.69782-1-david@ixit.cz

Since 'qcom,apr-domain' is deprecated in favor of 'qcom,domain',
update accordingly.
Signed-off-by: NDavid Heidelberg <david@ixit.cz>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214102451.29084-1-david@ixit.cz

replace millivolt with correct microvolt and adjust value to
the minimal value allowed by documentation.

Found with `make qcom/sdm845-oneplus-fajita.dtb`.

Fixes:
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-microvolt' is a required property
        From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias2-microvolt' is a required property
        From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias3-microvolt' is a required property
        From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias4-microvolt' is a required property
        From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-millivolt', 'qcom,micbias2-millivolt', 'qcom,micbias3-millivolt', 'qcom,micbias4-millivolt' do not match any of the regexes: '^.*@[0-9a-f]+$', 'pinctrl-[0-9]+'

Fixes: 27ca1de0 ("arm64: dts: qcom: sdm845: add slimbus nodes")
Signed-off-by: NDavid Heidelberg <david@ixit.cz>
Tested-by: NSteev Klimaszewski <steev@kali.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213195105.114596-1-david@ixit.cz

The clock-lanes property is no longer used as it is not programmable by
the CSIPHY hardware block of Qcom ISPs and should be removed.
Signed-off-by: NRobert Foss <robert.foss@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211206154003.39892-3-robert.foss@linaro.org

The clock-lanes property is no longer used as it is not programmable by
the CSIPHY hardware block of Qcom ISPs and should be removed.
Signed-off-by: NRobert Foss <robert.foss@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211206154003.39892-2-robert.foss@linaro.org

This commit implements a DTS file for LG Bullhead (Nexus 5X) rev 1.0
with its matching "qcom,board-id" property.
Signed-off-by: NJean THOMAS <virgule@jeanthomas.me>
Reviewed-by: NPetr Vorel <petr.vorel@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201231832.188634-2-virgule@jeanthomas.me

This patch puts the generic code common across all hardware revisions
into a DTSI file.

It also prefixes the DTS filename with the vendor name, to follow the
naming convention used by other DTS files.
Signed-off-by: NJean THOMAS <virgule@jeanthomas.me>
Reviewed-by: NPetr Vorel <petr.vorel@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201231832.188634-1-virgule@jeanthomas.me

Though sc7280 itself doesn't need any of the defines in gpio.h, it's
highly likely that the actual boards will use them. Let's add the
include to the sc7280.dtsi file so that boards don't need to do it.
Suggested-by: NKonrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220125144316.v2.4.I3194c8bdb2ad3212665286fa273710a3c4840e94@changeid

This factors out a device tree fragment from some sc7280 device
trees. It represents the device tree bits that should be included for
"Chrome" based sc7280 boards. On these boards the bootloader (Coreboot
+ Depthcharge) configures things slightly different than the
bootloader that Qualcomm provides. The modem firmware on these boards
also works differently than on other Qulacomm products and thus the
reserved memory map needs to be adjusted.

NOTES:
- This is _not_ quite a no-op change. The "herobrine" and "idp"
  fragments here were different and it looks like someone simply
  forgot to update the herobrine version. This updates a few numbers
  to match IDP. This will also cause the `pmk8350_pon` to be disabled
  on idp/crd, which I belive is a correct change.
- At the moment this assumes LTE skus. Once it's clearer how WiFi SKUs
  will work (how much of the memory map they can reclaim) we may add
  an extra fragment that will rejigger one way or the other.
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Reviewed-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220125144316.v2.3.Iac012fa8d727be46448d47027a1813ea716423ce@changeid

The upcoming herobrine-r1 board is really not very similar to
herobrine-r0. Let's get rid of the "herobrine.dtsi" file and stick all
the content in the -r0 dts file directly. We'll also rename the dts so
it's obvious that it's just for -r0.

While renaming, let's actually name the file so it's obvious that
"herobrine" is both the name of the board and the name of the
"baseboard". In other words "herobrine" is an actual board but also
often used as the name of a whole class of similar boards that forked
from a design. While "herobrine-herobrine" is a bit of mouthful it
makes it more obvious which things are part of an actual board rather
than the baseboard.

NOTE: herobrine-rev0's days are likely doomed and this device tree is
likely to be deleted in the future.
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Reviewed-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220125144316.v2.2.Id9716db8c133bcb14c9413144048f8d00ae2674f@changeid

When processing sc7280 device trees, I can see:

  Warning (simple_bus_reg): /soc@0/gmu@3d69000:
    simple-bus unit address format error, expected "3d6a000"

There's a clear typo in the node name. Fix it.

Fixes: 96c47197 ("arm64: dts: qcom: sc7280: Add gpu support")
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Reviewed-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220125144316.v2.1.I19f60014e9be4b9dda4d66b5d56ef3d9600b6e10@changeid

Add the camera clock controller node for SC7280 SoC.
Signed-off-by: NTaniya Das <tdas@codeaurora.org>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124184437.9278-1-tdas@codeaurora.org

Signed-off-by: NKuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Signed-off-by: NSankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1640361793-26486-5-git-send-email-quic_sbillaka@quicinc.com

Add edp controller and phy DT nodes for sc7280.
Signed-off-by: NSankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: NKrishna Manikandan <quic_mkrishn@quicinc.com>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1640361793-26486-4-git-send-email-quic_sbillaka@quicinc.com

Add DSI controller and PHY nodes for sc7280.
Signed-off-by: NRajeev Nandan <quic_rajeevny@quicinc.com>
Signed-off-by: NKrishna Manikandan <quic_mkrishn@quicinc.com>
Reviewed-by: NMatthias Kaehlcke <mka@chromium.org>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Signed-off-by: NSankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1640361793-26486-3-git-send-email-quic_sbillaka@quicinc.com

Add mdss and mdp DT nodes for sc7280.
Signed-off-by: NKrishna Manikandan <quic_mkrishn@quicinc.com>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Signed-off-by: NSankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1640361793-26486-2-git-send-email-quic_sbillaka@quicinc.com

Some trogdor boards have on-board regulators for the MIPI camera
components. Add nodes describing these regulators so boards with these
supplies can consume them.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: NStephen Boyd <swboyd@chromium.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211216044529.733652-1-swboyd@chromium.org

Move USB2 controller and phy nodes from common dtsi file as it is
required only for SKU1 board and change the mode to host mode as
it will be used in host mode for SKU1.
Signed-off-by: NSandeep Maheswaram <quic_c_sanm@quicinc.com>
Reviewed-by: NMatthias Kaehlcke <mka@chromium.org>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1638422248-24221-1-git-send-email-quic_c_sanm@quicinc.com