提交 27ca1de0 编写于 作者: S Srinivas Kandagatla 提交者: Bjorn Andersson
上级 f4820fd3
......@@ -2651,6 +2651,87 @@
status = "disabled";
};
slim: slim@171c0000 {
compatible = "qcom,slim-ngd-v2.1.0";
reg = <0 0x171c0000 0 0x2c000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
qcom,apps-ch-pipes = <0x780000>;
qcom,ea-pc = <0x270>;
status = "okay";
dmas = <&slimbam 3>, <&slimbam 4>,
<&slimbam 5>, <&slimbam 6>;
dma-names = "rx", "tx", "tx2", "rx2";
iommus = <&apps_smmu 0x1806 0x0>;
#address-cells = <1>;
#size-cells = <0>;
ngd@1 {
reg = <1>;
#address-cells = <2>;
#size-cells = <0>;
wcd9340_ifd: ifd@0{
compatible = "slim217,250";
reg = <0 0>;
};
wcd9340: codec@1{
compatible = "slim217,250";
reg = <1 0>;
slim-ifc-dev = <&wcd9340_ifd>;
#sound-dai-cells = <1>;
interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
#clock-cells = <0>;
clock-frequency = <9600000>;
clock-output-names = "mclk";
qcom,micbias1-millivolt = <1800>;
qcom,micbias2-millivolt = <1800>;
qcom,micbias3-millivolt = <1800>;
qcom,micbias4-millivolt = <1800>;
#address-cells = <1>;
#size-cells = <1>;
wcdgpio: gpio-controller@42 {
compatible = "qcom,wcd9340-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x42 0x2>;
};
swm: swm@c85 {
compatible = "qcom,soundwire-v1.3.0";
reg = <0xc85 0x40>;
interrupts-extended = <&wcd9340 20>;
qcom,dout-ports = <6>;
qcom,din-ports = <2>;
qcom,ports-sinterval-low =/bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>;
qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >;
qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>;
#sound-dai-cells = <1>;
clocks = <&wcd9340>;
clock-names = "iface";
#address-cells = <2>;
#size-cells = <0>;
};
};
};
};
sound: sound {
};
usb_1_hsphy: phy@88e2000 {
compatible = "qcom,sdm845-qusb2-phy";
reg = <0 0x088e2000 0 0x400>;
......@@ -3502,6 +3583,18 @@
};
};
slimbam: dma@17184000 {
compatible = "qcom,bam-v1.7.0";
qcom,controlled-remotely;
reg = <0 0x17184000 0 0x2a000>;
num-channels = <31>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <1>;
qcom,num-ees = <2>;
iommus = <&apps_smmu 0x1806 0x0>;
};
timer@17c90000 {
#address-cells = <2>;
#size-cells = <2>;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册