Undo the open coded and incorrect translation of the oem parameter sas
address to its libsas expected format.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Removed all callbacks in the deprecated.c. Core will call the appropriate
functions directly.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Renaming the callbacks to apparopriate event notify calls for the LLDD.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Remove abstraction for SG building and get rid of callbacks for getting
DMA memory mapping.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

We can copy the data directly to and from sg for SATA PIO read operations.
There is no reason to involve the hardware SGL. In the process we also need
to kmap the sg because we don't know where that can come from.

We also do to not call phys_to_virt(). The driver already has the information.
We can just calculcate the appropriate offets.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

These macros are not necessary. We can do 64bit math directly.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Sending aborts/resets to SAS/SATA targets in APC mode eventually causes
an assert in scic_sds_apc_agent_link_up().  We need to handle the hard reset
case for apc mode ports.
Signed-off-by: NPiotr Sawicki <piotr.sawicki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Update the SCI Core to comprehend the changes in the TC completion
codes from A0 to B0.  Specifically, there isnew R_ER code
differences for command and data FISes.

Changes are as follows:

1) 0x16 now additionally indicates an R_ERR received for a COMMAND
FIS being sent to a SATA target.  0x16 for SSP still indicates a
NAK received for a COMMAND frame.  Fix is to retry TC to be compliant
with SATA spec or ensure proper error handling of return value
(not spec compliant I don't believe).
2) 0x1B was previously called DONE_BREAK_RCVD for STP and
DONE_LL_ABORT_ERR for SSP.  Now it is universally called
DONE_LL_ABORT_ERR.  This is purely a superficial change.
3) 0x32 is no longer a reserved code.  Now it indicates
DONE_CMD_SDMA_ERR for STP/SSP.  There was a fatal error on the
SDMA for a command IU (includes Raw frames).  Consider retry,
but at a minimum gracefully fail the request.
4) 0x33 is no longer a reserved code.  Now it indicates
DONE_CMD_LL_ABORT_ERR for SSP.  There was a break receivd
during transmission of a command IU.  Consider retry, but
at a minimum gracefully fail the request.
Signed-off-by: NTomasz Chudy <Tomasz.Chudy@intel.com>
Signed-off-by: NJacek Danecki <Jacek.Danecki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Use the dynamic revision detection code in
scic_sds_phy_link_layer_initialization() and apply some coding style
fixups (long deref chains).  The compile time max link rate setting is
removed in favor of honoring the user-parameter max.
Reported-by: NKrzysztof Wierzbicki <Krzysztof.Wierzbicki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Add support for the following parameters in SCIC:

     /**
       * This field specifies the NOTIFY (ENABLE SPIN UP) primitive
       * insertion frequency for this phy index.
       */
      u32  notify_enable_spin_up_insertion_frequency;

      /**
       * This method specifies the number of transmitted DWORDs within which
       * to transmit a single ALIGN primitive.  This value applies regardless
       * of what type of device is attached or connection state.  A value of
       * 0 indicates that no ALIGN primitives will be inserted.
       */
      u16  align_insertion_frequency;

      /**
       * This method specifies the number of transmitted DWORDs within which
       * to transmit 2 ALIGN primitives.  This applies for SAS connections
       * only.  A minimum value of 3 is required for this field.
       */
      u16  in_connection_align_insertion_frequency;
Signed-off-by: NKrzysztof Wierzbicki <Krzysztof.Wierzbicki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

At init and RNC resume we need to touch every phy in a port to be sure
we have initialized STP properties in the case where port_index !=
phy_index.  Also add some missing __iomem annotations.
Signed-off-by: NHenryk Dembkowski <henryk.dembkowski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The default should be 5us.  The hardware encodes it in 256ns increments,
so the value should be 20 to approximate a 5us timeout.
Signed-off-by: NTomasz Chudy <Tomasz.Chudy@intel.com>
Signed-off-by: NJacek Danecki <Jacek.Danecki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

 c99 the struct initializers:
	1/ allows grep to consistently show method name associations.  The
	   naming is mostly consistent (except when it isn't) so this guarantees
	   coverage of present and future exception cases.
	2/ let's the compiler guarantee that the state table array entry
	   correlates with an actual state name and detect accidental reordering or
	   deletion of states.
	/ allows default handler's to be identified easily
Signed-off-by: NJacek Danecki <Jacek.Danecki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Moved the firmware loading from per adapter to per PCI device. This should
prevent firmware from being loaded twice becuase of 2 SCU controller per
PCI device. We do have to do it per PCI device because request_firmware()
requires a struct device passed in.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The proc_name field in struct scsi_host_template is exported through sysfs and
allows userspace tools to identify the driver behind a particular SCSI host
controller.

Initialize this field so that userspace tools can easily identify isci host
controllers through sysfs.
Signed-off-by: NHavard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This removes scic_controller_get_handler_methods and its
associated unused code.
Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
[djbw: kill off the legacy handler, now that we have basic error isr support]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Some of the chain walks to get back to our dev are invalid.

isci_remote_device_change_state: delete rather than adding conditional deref
chain walking
isci_request_change_state: fix, it was being called too early
isci_request_ssp_io_request_get_lun: fix compile breakage hidden by ifdef DEBUG
Signed-off-by: NMaciej Trela <maciej.trela@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Inform libsas of the linkrate of direct attached links.
Reported-by: NHaavard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Add basic support for handling/reporting error interrupts.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Polling the event queue during scan is an unneeded holdover from the
original driver.
Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
[djbw: ensure we flush all port events and domain discovery]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The lldd actively disallows requests in the "starting" state.  Retrying
or holding off commands in this state is sub-optimal:
1/ it adds another state check to the fast path
2/ retrying can cause libsas to give up

However, isci's ->lldd_dev_found() routine already waits for controller
start to complete before allowing further progress.  Checking the
"starting" state in isci_task_execute_task and the isr is redundant and
misleading.  Clean this up and introduce a controller-wide event queue
to start reeling in "completion" proliferation in the driver.

The "stopping" state cleanups are in a similar vein, rely on the the isr
and other paths being precluded from occurring rather than implementing
state checking logic.
Reported-by: NChristoph Hellwig <hch@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The indirection is unecessary and broken in the current case that assigns the
handlers based on a not up-to-date pdev->msix_enabled value.

Route the handlers directly to the requisite core routines.

Todo: hook up error interrupt handling
Reported-by: NJeff Garzik <jeff@garzik.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This will be replaced by state machine tracepoints and should have been a part
of the logger removal.

Ran across scic_sds_port_decrement_request_count() which is an ugly macro
which silently hides accounting errors.  Turn it into a WARN_ONCE to see if it
ever triggers.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Callbacks are already type unsafe, obfuscating things further by casting the
callback routine is less safe because now function argument number changes
will not be caught by the compiler.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Change names from upper to low letters
Signed-off-by: NHenryk Dembkowski <henryk.dembkowski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Remove duplicated license and header file includes that were leftover
from commit 4c1db2d0 "isci: consolidate core" (in the isci.git historical
branch).
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

	scic_sds_stp_remote_device_ready_substate_handler_table[]
	scic_sds_smp_remote_device_ready_substate_handler_table[]

c99 the struct initializers:
	1/ allows grep to consistently show method name associations.  The
	   naming is mostly consistent (except when it isn't) so this guarantees
	   coverage of present and future exception cases.
	2/ let's the compiler guarantee that the state table array entry
	   correlates with an actual state name and detect accidental reordering or
	   deletion of states.
	3/ allows default handler's to be identified easily
Signed-off-by: NHenryk Dembkowski <henryk.dembkowski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Change names from upper to low letters
Signed-off-by: NHenryk Dembkowski <henryk.dembkowski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

c99 the struct initializers (scic_sds_remote_device_state_handler_table[]):
	1/ allows grep to consistently show method name associations.  The
	   naming is mostly consistent (except when it isn't) so this guarantees
	   coverage of present and future exception cases.
	2/ let's the compiler guarantee that the state table array entry
	   correlates with an actual state name and detect accidental reordering or
	   deletion of states.
	3/ allows default handler's to be identified easily

Change names from upper to low letters

Cleanup empty lines
Signed-off-by: NHenryk Dembkowski <henryk.dembkowski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

We no longer use the loglevel parameter. Remove.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
[rebased after killing SCI_IO_REQUEST_DATA_DIRECTION]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

It's an unnecessary typedef that mirrors the kernel's enum
dma_data_direction.

Also cleanup some long variable names along the way.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Replace SCI_INVALID_HANDLE with NULL
Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Support for the up to 2x4-port 6Gb/s SAS controllers embedded in the
chipset.

This is a snapshot of the first publicly available version of the driver,
commit 4c1db2d0 in the 'historical' branch.

   git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git historical
Signed-off-by: NMaciej Trela <maciej.trela@intel.com>
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Al Viro observes that in the hugetlb case, handle_mm_fault() may return
a value of the kind ENOSPC when its caller is expecting a value of the
kind VM_FAULT_SIGBUS: fix alloc_huge_page()'s failure returns.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: usb - turn off de-emphasis in s/pdif for cm6206
  ALSA: asihpi: Use angle brackets for system includes
  ALSA: fm801: add error handling if auto-detect fails
  ALSA: hda - Check pin support EAPD in ad198x_power_eapd_write
  ALSA: hda - Fix HP and Front pins of ad1988/ad1989 in ad198x_power_eapd()
  ALSA: 6fire: Don't leak firmware in error path
  ASoC: Fix wm_hubs input PGA ZC bits
  ASoC: Fix dapm_is_shared_kcontrol so everything isn't shared

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (max6642): Better chip detection schema
  hwmon: (coretemp) Further relax temperature range checks
  hwmon: (coretemp) Fix TjMax detection for older CPUs
  hwmon: (coretemp) Relax target temperature range check
  hwmon: (max6642) Rename temp_fault sysfs attribute to temp2_fault