提交 d9def184 编写于 作者: J Jacek Danecki 提交者: Dan Williams

isci: Add support for user parameters in SCIC layer

Add support for the following parameters in SCIC:

     /**
       * This field specifies the NOTIFY (ENABLE SPIN UP) primitive
       * insertion frequency for this phy index.
       */
      u32  notify_enable_spin_up_insertion_frequency;

      /**
       * This method specifies the number of transmitted DWORDs within which
       * to transmit a single ALIGN primitive.  This value applies regardless
       * of what type of device is attached or connection state.  A value of
       * 0 indicates that no ALIGN primitives will be inserted.
       */
      u16  align_insertion_frequency;

      /**
       * This method specifies the number of transmitted DWORDs within which
       * to transmit 2 ALIGN primitives.  This applies for SAS connections
       * only.  A minimum value of 3 is required for this field.
       */
      u16  in_connection_align_insertion_frequency;
Signed-off-by: NKrzysztof Wierzbicki <Krzysztof.Wierzbicki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
上级 24621466
......@@ -616,7 +616,6 @@ void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic)
scu_afe_register_write(scic, afe_bias_control, 0x00005500);
else
scu_afe_register_write(scic, afe_bias_control, 0x00005A00);
scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY);
......@@ -625,7 +624,7 @@ void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic)
scu_afe_register_write(scic, afe_pll_control0, 0x80040A08);
else
scu_afe_register_write(scic, afe_pll_control0, 0x80040908);
scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY);
/* Wait for the PLL to lock */
......@@ -1962,17 +1961,16 @@ void scic_sds_controller_release_frame(
* configuration parameters to their default values.
*
*/
static void scic_sds_controller_set_default_config_parameters(
struct scic_sds_controller *this_controller)
static void scic_sds_controller_set_default_config_parameters(struct scic_sds_controller *scic)
{
u16 index;
/* Default to no SSC operation. */
this_controller->oem_parameters.sds1.controller.do_enable_ssc = false;
scic->oem_parameters.sds1.controller.do_enable_ssc = false;
/* Initialize all of the port parameter information to narrow ports. */
for (index = 0; index < SCI_MAX_PORTS; index++) {
this_controller->oem_parameters.sds1.ports[index].phy_mask = 0;
scic->oem_parameters.sds1.ports[index].phy_mask = 0;
}
/* Initialize all of the phy parameter information. */
......@@ -1980,24 +1978,27 @@ static void scic_sds_controller_set_default_config_parameters(
/*
* Default to 3G (i.e. Gen 2) for now. User can override if
* they choose. */
this_controller->user_parameters.sds1.phys[index].max_speed_generation = 2;
scic->user_parameters.sds1.phys[index].max_speed_generation = 2;
/* the frequencies cannot be 0 */
scic->user_parameters.sds1.phys[index].align_insertion_frequency = 0x7f;
scic->user_parameters.sds1.phys[index].in_connection_align_insertion_frequency = 0xff;
scic->user_parameters.sds1.phys[index].notify_enable_spin_up_insertion_frequency = 0x33;
/*
* Previous Vitesse based expanders had a arbitration issue that
* is worked around by having the upper 32-bits of SAS address
* with a value greater then the Vitesse company identifier.
* Hence, usage of 0x5FCFFFFF. */
this_controller->oem_parameters.sds1.phys[index].sas_address.low
= 0x00000001;
this_controller->oem_parameters.sds1.phys[index].sas_address.high
= 0x5FCFFFFF;
scic->oem_parameters.sds1.phys[index].sas_address.low = 0x00000001;
scic->oem_parameters.sds1.phys[index].sas_address.high = 0x5FCFFFFF;
}
this_controller->user_parameters.sds1.stp_inactivity_timeout = 5;
this_controller->user_parameters.sds1.ssp_inactivity_timeout = 5;
this_controller->user_parameters.sds1.stp_max_occupancy_timeout = 5;
this_controller->user_parameters.sds1.ssp_max_occupancy_timeout = 20;
this_controller->user_parameters.sds1.no_outbound_task_timeout = 20;
scic->user_parameters.sds1.stp_inactivity_timeout = 5;
scic->user_parameters.sds1.ssp_inactivity_timeout = 5;
scic->user_parameters.sds1.stp_max_occupancy_timeout = 5;
scic->user_parameters.sds1.ssp_max_occupancy_timeout = 20;
scic->user_parameters.sds1.no_outbound_task_timeout = 20;
}
......@@ -2103,9 +2104,9 @@ u32 scic_controller_get_suggested_start_timeout(
* per interval - 1 (once OEM parameters are supported).
* Currently we assume only 1 phy per interval. */
return (SCIC_SDS_SIGNATURE_FIS_TIMEOUT
return SCIC_SDS_SIGNATURE_FIS_TIMEOUT
+ SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT
+ ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL));
+ ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL);
}
/* --------------------------------------------------------------------------- */
......@@ -2489,16 +2490,29 @@ enum sci_status scic_user_parameters_set(
* Validate the user parameters. If they are not legal, then
* return a failure. */
for (index = 0; index < SCI_MAX_PHYS; index++) {
if (!
(scic_parms->sds1.phys[index].max_speed_generation
if (!(scic_parms->sds1.phys[index].max_speed_generation
<= SCIC_SDS_PARM_MAX_SPEED
&& scic_parms->sds1.phys[index].max_speed_generation
> SCIC_SDS_PARM_NO_SPEED
)
> SCIC_SDS_PARM_NO_SPEED))
return SCI_FAILURE_INVALID_PARAMETER_VALUE;
if (scic_parms->sds1.phys[index].in_connection_align_insertion_frequency < 3)
return SCI_FAILURE_INVALID_PARAMETER_VALUE;
if (
(scic_parms->sds1.phys[index].in_connection_align_insertion_frequency < 3) ||
(scic_parms->sds1.phys[index].align_insertion_frequency == 0) ||
(scic_parms->sds1.phys[index].notify_enable_spin_up_insertion_frequency == 0)
)
return SCI_FAILURE_INVALID_PARAMETER_VALUE;
}
if ((scic_parms->sds1.stp_inactivity_timeout == 0) ||
(scic_parms->sds1.ssp_inactivity_timeout == 0) ||
(scic_parms->sds1.stp_max_occupancy_timeout == 0) ||
(scic_parms->sds1.ssp_max_occupancy_timeout == 0) ||
(scic_parms->sds1.no_outbound_task_timeout == 0))
return SCI_FAILURE_INVALID_PARAMETER_VALUE;
memcpy(&scic->user_parameters, scic_parms, sizeof(*scic_parms));
return SCI_SUCCESS;
......
......@@ -125,6 +125,7 @@ static enum sci_status scic_sds_phy_link_layer_initialization(
u32 parity_check = 0;
u32 parity_count = 0;
u32 link_layer_control;
u32 clksm_value = 0;
this_phy->link_layer_registers = link_layer_registers;
......@@ -199,7 +200,20 @@ static enum sci_status scic_sds_phy_link_layer_initialization(
SCU_SAS_PHYCAP_WRITE(this_phy, phy_capabilities.u.all);
/* Set the enable spinup period but disable the ability to send notify enable spinup */
SCU_SAS_ENSPINUP_WRITE(this_phy, SCU_ENSPINUP_GEN_VAL(COUNT, 0x33));
SCU_SAS_ENSPINUP_WRITE(this_phy, SCU_ENSPINUP_GEN_VAL(COUNT,
this_phy->owning_port->owning_controller->user_parameters.sds1.
phys[this_phy->phy_index].notify_enable_spin_up_insertion_frequency));
/* Write the ALIGN Insertion Ferequency for connected phy and inpendent of connected state */
clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED,
this_phy->owning_port->owning_controller->user_parameters.sds1.
phys[this_phy->phy_index].in_connection_align_insertion_frequency);
clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL,
this_phy->owning_port->owning_controller->user_parameters.sds1.
phys[this_phy->phy_index].align_insertion_frequency);
SCU_SAS_CLKSM_WRITE(this_phy, clksm_value);
#if defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) || defined(CONFIG_PBG_HBA_BETA)
/* / @todo Provide a way to write this register correctly */
......
......@@ -217,6 +217,14 @@
#define SCU_SAS_ENSPINUP_WRITE(phy, value) \
scu_link_layer_register_write(phy, notify_enable_spinup_control, value)
/* This macro reads the CLKSM register */
#define SCU_SAS_CLKSM_READ(phy) \
scu_link_layer_register_read(phy, clock_skew_management)
/* This macro writes the CLKSM register */
#define SCU_SAS_CLKSM_WRITE(phy, value) \
scu_link_layer_register_write(phy, clock_skew_management, value)
/* / This macro reads the PHY Capacity register */
#define SCU_SAS_PHYCAP_READ(phy) \
scu_link_layer_register_read(phy, phy_capabilities)
......
......@@ -611,6 +611,13 @@
#define SCU_SAS_PCFG_GEN_BIT(name) \
SCU_GEN_BIT(SCU_SAS_PHY_CONFIGURATION_ ## name)
#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_SHIFT (0)
#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_MASK (0x000007FF)
#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_SHIFT (16)
#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_MASK (0x00ff0000)
#define SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(name, value) \
SCU_GEN_VALUE(SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_##name, value)
#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_SHIFT (0)
#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_MASK (0x0003FFFF)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册