This patch adds error checking to functions creating controls inside of
ca0132_build_controls().
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch cleans up the patch_ca0132() function with suggestions from
Takashi Sakamoto.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch fixes microphone inconsistency issues by adding a delay to
each setup_defaults function. Without this, the microphone only works
intermittently.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds exit operations for the Sound Blaster ZxR.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds a control for 600 ohm gain on the Sound Blaster ZxR.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch removes the input select control for the ZxR, as it only has
one input option, rear microphone.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds commands for selecting input and output on the Sound
Blaster ZxR. The ZxR has no front panel header, and has line-in on the
separate daughter board, so it only does rear-mic.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds commands for setting up the ZxR after the DSP is
downloaded. The ZxR already shares most of the post-download commands
from the regular Sound Blaster Z.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds init commands for the main Sound Blaster ZxR card.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds separate hda_codec_ops for the DBPro daughter board, as
it behaves more like a generic HDA codec than the other ca0132 cards,
despite having a ca0132 on board.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds a pincfg for the ZxR, and defines which pins are used
for both.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds quirk ID's for the ZxR and it's daughter board, the
DBPro. It also adds a function for determining the quirk for each board
through HDA subsytem ID's instead of PCI subsystem ID's.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch fixes an issue where if surround sound was the selected
output and output effects were enabled, the sound wasn't sent to all
channels correctly.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch corrects the control type of the additional AE-5 controls
added in a previous patch from HDA_INPUT to HDA_OUTPUT.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds exit commands for the AE-5.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds controls for the AE-5's headphone gain setting, and the
DAC's interpolation filter setting.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds the input selection commands for the Sound BlasterX
AE-5.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds output selection commands for the AE-5.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch cleans up ca0132_alt_out_select by moving the card specific
output commands into a separate function. As more cards are added, the
function ca0132_alt_out_select is going to get more bloated with these,
so moving into a separate function tries to keep that from happening.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds DSP setup functions for the AE-5.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch cleans up some of the formatting of the post-dsp load setup
functions, and also merges some of the sub functions into individual
ones.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Recon3D, AE-5, Z and ZxR all share the same firmware file. Rename
this from the specific "ctefx-sbz.bin" to "ctefx-desktop.bin" and set
the AE-5 and Recon3D to use it as well.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds AE-5 specific stuff to the ca0132_alt_init function.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds AE-5 pre-init functions that happen before the main
ca0132_alt_init, and gives functions related to the ca0113 a ca0113
prefix instead of ca0132. It also adds functions to write to the 8051's
SFRs, and to write the special ca0113 commands for the AE-5.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds the unique writes for the AE-5 on startup to
ca0132_mmio_init. The other cards share some addresses written to, but
use different values.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch sets the bool values for the AE-5, as well as selects the
mixer it will use.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds the pincfg for the Sound BlasterX AE-5, and cleans up
the function it's assigned in.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds the PCI subsys ID quirk for the Sound BlasterX AE-5.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch defines some new verbs found from reverse engineering of the
onboard 8051 CPU, and a control param found there as well. This clears
up usage of these verbs in other parts of the driver, and removes their
usage where they're now known to be unnecessary.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

As suggested by Takashi, move this header file to make it easier
to include from e.g. the Intel Skylake driver in follow-up patches
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds exit functions for the Recon3D, and cleans up the
current exit function.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds changes to setup the Recon3D's mixer controls.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds commands to the alternative input and output select
commands to support the Recon3D.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Recon3D can use many of the same functions as the Recon3Di, so many
of the r3di prefix function remain the same, but change their names to
the more generic r3d prefix. This patch does this, and adds quirk checks
for things specific to the Recon3Di.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds functions for Recon3D startup, and sets values for
things such as use_pci_mmio. It also renames some functions and tables
from the sbz prefix into ca0132, as the Recon3D uses them as well.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds the ability to choose whether or not to map the pci
region2, which is used for things such as GPIO on the Recon3D and Sound
Blaster Z.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds pin configs from the Recon3D, taken from the Window's
driver.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds the PCI subsys ID for the Recon3D that has been tested,
and adds the QUIRK_R3D enumeration.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch fixes a previous oversight where the microphone unsolicited
response would use the wrong input selection function.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch cleans up ca0132_init by removing unnecessary commands and
ordering things better.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>