提交 7675a2a9 编写于 作者: C Connor McAdams 提交者: Takashi Iwai

ALSA: hda/ca0132 - Add DBpro hda_codec_ops

This patch adds separate hda_codec_ops for the DBPro daughter board, as
it behaves more like a generic HDA codec than the other ca0132 cards,
despite having a ca0132 on board.
Signed-off-by: NConnor McAdams <conmanx360@gmail.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 6dcd7244
......@@ -6416,6 +6416,27 @@ static int ca0132_build_controls(struct hda_codec *codec)
return 0;
}
static int dbpro_build_controls(struct hda_codec *codec)
{
struct ca0132_spec *spec = codec->spec;
int err = 0;
if (spec->dig_out) {
err = snd_hda_create_spdif_out_ctls(codec, spec->dig_out,
spec->dig_out);
if (err < 0)
return err;
}
if (spec->dig_in) {
err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in);
if (err < 0)
return err;
}
return 0;
}
/*
* PCM
*/
......@@ -6519,6 +6540,40 @@ static int ca0132_build_pcms(struct hda_codec *codec)
return 0;
}
static int dbpro_build_pcms(struct hda_codec *codec)
{
struct ca0132_spec *spec = codec->spec;
struct hda_pcm *info;
info = snd_hda_codec_pcm_new(codec, "CA0132 Alt Analog");
if (!info)
return -ENOMEM;
info->stream[SNDRV_PCM_STREAM_CAPTURE] = ca0132_pcm_analog_capture;
info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1;
info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0];
if (!spec->dig_out && !spec->dig_in)
return 0;
info = snd_hda_codec_pcm_new(codec, "CA0132 Digital");
if (!info)
return -ENOMEM;
info->pcm_type = HDA_PCM_TYPE_SPDIF;
if (spec->dig_out) {
info->stream[SNDRV_PCM_STREAM_PLAYBACK] =
ca0132_pcm_digital_playback;
info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dig_out;
}
if (spec->dig_in) {
info->stream[SNDRV_PCM_STREAM_CAPTURE] =
ca0132_pcm_digital_capture;
info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in;
}
return 0;
}
static void init_output(struct hda_codec *codec, hda_nid_t pin, hda_nid_t dac)
{
if (pin) {
......@@ -7649,6 +7704,16 @@ static void sbz_gpio_shutdown_commands(struct hda_codec *codec, int dir,
AC_VERB_SET_GPIO_DATA, data);
}
static void zxr_dbpro_power_state_shutdown(struct hda_codec *codec)
{
hda_nid_t pins[7] = {0x05, 0x0c, 0x09, 0x0e, 0x08, 0x11, 0x01};
unsigned int i;
for (i = 0; i < 7; i++)
snd_hda_codec_write(codec, pins[i], 0,
AC_VERB_SET_POWER_STATE, 0x03);
}
static void sbz_exit_chip(struct hda_codec *codec)
{
chipio_set_stream_control(codec, 0x03, 0);
......@@ -8147,6 +8212,21 @@ static int ca0132_init(struct hda_codec *codec)
return 0;
}
static int dbpro_init(struct hda_codec *codec)
{
struct ca0132_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
unsigned int i;
init_output(codec, cfg->dig_out_pins[0], spec->dig_out);
init_input(codec, cfg->dig_in_pin, spec->dig_in);
for (i = 0; i < spec->num_inputs; i++)
init_input(codec, spec->input_pins[i], spec->adcs[i]);
return 0;
}
static void ca0132_free(struct hda_codec *codec)
{
struct ca0132_spec *spec = codec->spec;
......@@ -8178,6 +8258,16 @@ static void ca0132_free(struct hda_codec *codec)
kfree(codec->spec);
}
static void dbpro_free(struct hda_codec *codec)
{
struct ca0132_spec *spec = codec->spec;
zxr_dbpro_power_state_shutdown(codec);
kfree(spec->spec_init_verbs);
kfree(codec->spec);
}
static void ca0132_reboot_notify(struct hda_codec *codec)
{
codec->patch_ops.free(codec);
......@@ -8192,6 +8282,13 @@ static const struct hda_codec_ops ca0132_patch_ops = {
.reboot_notify = ca0132_reboot_notify,
};
static const struct hda_codec_ops dbpro_patch_ops = {
.build_controls = dbpro_build_controls,
.build_pcms = dbpro_build_pcms,
.init = dbpro_init,
.free = dbpro_free,
};
static void ca0132_config(struct hda_codec *codec)
{
struct ca0132_spec *spec = codec->spec;
......@@ -8488,6 +8585,9 @@ static int patch_ca0132(struct hda_codec *codec)
spec->mixers[0] = desktop_mixer;
snd_hda_codec_set_name(codec, "Sound Blaster Z");
break;
case QUIRK_ZXR_DBPRO:
codec->patch_ops = dbpro_patch_ops;
break;
case QUIRK_R3D:
spec->mixers[0] = desktop_mixer;
snd_hda_codec_set_name(codec, "Recon3D");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册