Nullify the llcp_sock->dev on llcp_sock_connect() error paths,
symmetrically to the code llcp_sock_bind().  The non-NULL value of
llcp_sock->dev is used in a few places to check whether the socket is
still valid.

There was no particular issue observed with missing NULL assignment in
connect() error path, however a similar case - in the bind() error path
- was triggereable.  That one was fixed in commit 4ac06a1e ("nfc:
fix NULL ptr dereference in llcp_sock_getname() after failed connect"),
so the change here seems logical as well.
Signed-off-by: NKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
HW counters for soft devices

Petr says:

Offloading switch device drivers may be able to collect statistics of the
traffic taking place in the HW datapath that pertains to a certain soft
netdevice, such as a VLAN. In this patch set, add the necessary
infrastructure to allow exposing these statistics to the offloaded
netdevice in question, and add mlxsw offload.

Across HW platforms, the counter itself very likely constitutes a limited
resource, and the act of counting may have a performance impact. Therefore
this patch set makes the HW statistics collection opt-in and togglable from
userspace on a per-netdevice basis.

Additionally, HW devices may have various limiting conditions under which
they can realize the counter. Therefore it is also possible to query
whether the requested counter is realized by any driver. In TC parlance,
which is to a degree reused in this patch set, two values are recognized:
"request" tracks whether the user enabled collecting HW statistics, and
"used" tracks whether any HW statistics are actually collected.

In the past, this author has expressed the opinion that `a typical user
doing "ip -s l sh", including various scripts, wants to see the full
picture and not worry what's going on where'. While that would be nice,
unfortunately it cannot work:

- Packets that trap from the HW datapath to the SW datapath would be
  double counted.

  For a given netdevice, some traffic can be purely a SW artifact, and some
  may flow through the HW object corresponding to the netdevice. But some
  traffic can also get trapped to the SW datapath after bumping the HW
  counter. It is not clear how to make sure double-counting does not occur
  in the SW datapath in that case, while still making sure that possibly
  divergent SW forwarding path gets bumped as appropriate.

  So simply adding HW and SW stats may work roughly, most of the time, but
  there are scenarios where the result is nonsensical.

- HW devices will have limitations as to what type of traffic they can
  count.

  In case of mlxsw, which is part of this patch set, there is no reasonable
  way to count all traffic going through a certain netdevice, such as a
  VLAN netdevice enslaved to a bridge. It is however very simple to count
  traffic flowing through an L3 object, such as a VLAN netdevice with an IP
  address.

  Similarly for physical netdevices, the L3 object at which the counter is
  installed is the subport carrying untagged traffic.

  These are not "just counters". It is important that the user understands
  what is being counted. It would be incorrect to conflate these statistics
  with another existing statistics suite.

To that end, this patch set introduces a statistics suite called "L3
stats". This label should make it easy to understand what is being counted,
and to decide whether a given device can or cannot implement this suite for
some type of netdevice. At the same time, the code is written to make
future extensions easy, should a device pop up that can implement a
different flavor of statistics suite (say L2, or an address-family-specific
suite).

For example, using a work-in-progress iproute2[1], to turn on and then list
the counters on a VLAN netdevice:

    # ip stats set dev swp1.200 l3_stats on
    # ip stats show dev swp1.200 group offload subgroup l3_stats
    56: swp1.200: group offload subgroup l3_stats on used on
	RX:  bytes packets errors dropped  missed   mcast
		0       0      0       0       0       0
	TX:  bytes packets errors dropped carrier collsns
		0       0      0       0       0       0

The patchset progresses as follows:

- Patch #1 is a cleanup.

- In patch #2, remove the assumption that all LINK_OFFLOAD_XSTATS are
  dev-backed.

  The only attribute defined under the nest is currently
  IFLA_OFFLOAD_XSTATS_CPU_HIT. L3_STATS differs from CPU_HIT in that the
  driver that supplies the statistics is not the same as the driver that
  implements the netdevice. Make the code compatible with this in patch #2.

- In patch #3, add the possibility to filter inside nests.

  The filter_mask field of RTM_GETSTATS header determines which
  top-level attributes should be included in the netlink response. This
  saves processing time by only including the bits that the user cares
  about instead of always dumping everything. This is doubly important
  for HW-backed statistics that would typically require a trip to the
  device to fetch the stats. In this patch, the UAPI is extended to
  allow filtering inside IFLA_STATS_LINK_OFFLOAD_XSTATS in particular,
  but the scheme is easily extensible to other nests as well.

- In patch #4, propagate extack where we need it.
  In patch #5, make it possible to propagate errors from drivers to the
  user.

- In patch #6, add the in-kernel APIs for keeping track of the new stats
  suite, and the notifiers that the core uses to communicate with the
  drivers.

- In patch #7, add UAPI for obtaining the new stats suite.

- In patch #8, add a new UAPI message, RTM_SETSTATS, which will carry
  the message to toggle the newly-added stats suite.
  In patch #9, add the toggle itself.

At this point the core is ready for drivers to add support for the new
stats suite.

- In patches #10, #11 and #12, apply small tweaks to mlxsw code.

- In patch #13, add support for L3 stats, which are realized as RIF
  counters.

- Finally in patch #14, a selftest is added to the net/forwarding
  directory. Technically this is a HW-specific test, in that without a HW
  implementing the counters, it just will not pass. But devices that
  support L3 statistics at all are likely to be able to reuse this
  selftest, so it seems appropriate to put it in the general forwarding
  directory.

We also have a netdevsim implementation, and a corresponding selftest that
verifies specifically some of the core code. We intend to contribute these
later. Interested parties can take a look at the raw code at [2].

[1] https://github.com/pmachata/iproute2/commits/soft_counters
[2] https://github.com/pmachata/linux_mlxsw/commits/petrm_soft_counters_2

v2:
- Patch #3:
    - Do not declare strict_start_type at the new policies, since they are
      used with nla_parse_nested() (sans _deprecated).
    - Use NLA_POLICY_NESTED to declare what the nest contents should be
    - Use NLA_POLICY_MASK instead of BITFIELD32 for the filtering
      attribute.
- Patch #6:
    - s/monotonous/monotonic/ in commit message
    - Use a newly-added struct rtnl_hw_stats64 for stats transfer
- Patch #7:
    - Use a newly-added struct rtnl_hw_stats64 for stats transfer
- Patch #8:
    - Do not declare strict_start_type at the new policies, since they are
      used with nla_parse_nested() (sans _deprecated).
- Patch #13:
    - Use a newly-added struct rtnl_hw_stats64 for stats transfer
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a test that verifies operation of L3 HW statistics.
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Spectrum machines support L3 stats by binding a counter to a RIF, a
hardware object representing a router interface. Recognize the netdevice
notifier events, NETDEV_OFFLOAD_XSTATS_*, to support enablement,
disablement, and reporting back to core.

As a netdevice gains a RIF, if L3 stats are enabled, install the counters,
and ping the core so that a userspace notification can be emitted.

Similarly, as a netdevice loses a RIF, push the as-yet-unreported
statistics to the core, so that they are not lost, and ping the core to
emit userspace notification.
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several more events are coming in the following patches, and extending the
if statement is getting awkward. Instead, convert it to a switch.
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mlxsw_sp reference is carried by the mlxsw_sp_rif object that is passed
to these functions as well. Just deduce the former from the latter,
and drop the explicit mlxsw_sp parameter. Adapt callers.
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function mlxsw_reg_ritr_counter_pack() formats a register to configure
a router interface (RIF) counter. The parameter `egress' determines whether
an ingress or egress counter is to be configured. RITR, the register in
question, has two sets of counter-related fields: one for ingress, one for
egress. When setting values of the fields, the function sets the proper
counter index field, but when setting the counter type, it always sets the
egress field. Thus configuration of ingress counters is broken, and in fact
an attempt to configure an ingress counter mangles a previously configured
egress counter.

This was never discovered, because there is currently no way to enable
ingress counters on a router interface, only the egress one.

Fix in an obvious way.
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The offloaded HW stats are designed to allow per-netdevice enablement and
disablement. Add an attribute, IFLA_STATS_SET_OFFLOAD_XSTATS_L3_STATS,
which should be carried by the RTM_SETSTATS message, and expresses a desire
to toggle L3 offload xstats on or off.

As part of the above, add an exported function rtnl_offload_xstats_notify()
that drivers can use when they have installed or deinstalled the counters
backing the HW stats.

At this point, it is possible to enable, disable and query L3 offload
xstats on netdevices. (However there is no driver actually implementing
these.)
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The offloaded HW stats are designed to allow per-netdevice enablement and
disablement. These stats are only accessible through RTM_GETSTATS, and
therefore should be toggled by a RTM_SETSTATS message. Add it, and the
necessary skeleton handler.
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a new IFLA_STATS_LINK_OFFLOAD_XSTATS child attribute,
IFLA_OFFLOAD_XSTATS_L3_STATS, to carry statistics for traffic that takes
place in a HW router.

The offloaded HW stats are designed to allow per-netdevice enablement and
disablement. Additionally, as a netdevice is configured, it may become or
cease being suitable for binding of a HW counter. Both of these aspects
need to be communicated to the userspace. To that end, add another child
attribute, IFLA_OFFLOAD_XSTATS_HW_S_INFO:

    - attr nest IFLA_OFFLOAD_XSTATS_HW_S_INFO
	- attr nest IFLA_OFFLOAD_XSTATS_L3_STATS
 	    - attr IFLA_OFFLOAD_XSTATS_HW_S_INFO_REQUEST
	      - {0,1} as u8
 	    - attr IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED
	      - {0,1} as u8

Thus this one attribute is a nest that can be used to carry information
about various types of HW statistics, and indexing is very simply done by
wrapping the information for a given statistics suite into the attribute
that carries the suite is the RTM_GETSTATS query. At the same time, because
_HW_S_INFO is nested directly below IFLA_STATS_LINK_OFFLOAD_XSTATS, it is
possible through filtering to request only the metadata about individual
statistics suites, without having to hit the HW to get the actual counters.
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Offloading switch device drivers may be able to collect statistics of the
traffic taking place in the HW datapath that pertains to a certain soft
netdevice, such as VLAN. Add the necessary infrastructure to allow exposing
these statistics to the offloaded netdevice in question. The API was shaped
by the following considerations:

- Collection of HW statistics is not free: there may be a finite number of
  counters, and the act of counting may have a performance impact. It is
  therefore necessary to allow toggling whether HW counting should be done
  for any particular SW netdevice.

- As the drivers are loaded and removed, a particular device may get
  offloaded and unoffloaded again. At the same time, the statistics values
  need to stay monotonic (modulo the eventual 64-bit wraparound),
  increasing only to reflect traffic measured in the device.

  To that end, the netdevice keeps around a lazily-allocated copy of struct
  rtnl_link_stats64. Device drivers then contribute to the values kept
  therein at various points. Even as the driver goes away, the struct stays
  around to maintain the statistics values.

- Different HW devices may be able to count different things. The
  motivation behind this patch in particular is exposure of HW counters on
  Nvidia Spectrum switches, where the only practical approach to counting
  traffic on offloaded soft netdevices currently is to use router interface
  counters, and count L3 traffic. Correspondingly that is the statistics
  suite added in this patch.

  Other devices may be able to measure different kinds of traffic, and for
  that reason, the APIs are built to allow uniform access to different
  statistics suites.

- Because soft netdevices and offloading drivers are only loosely bound, a
  netdevice uses a notifier chain to communicate with the drivers. Several
  new notifiers, NETDEV_OFFLOAD_XSTATS_*, have been added to carry messages
  to the offloading drivers.

- Devices can have various conditions for when a particular counter is
  available. As the device is configured and reconfigured, the device
  offload may become or cease being suitable for counter binding. A
  netdevice can use a notifier type NETDEV_OFFLOAD_XSTATS_REPORT_USED to
  ping offloading drivers and determine whether anyone currently implements
  a given statistics suite. This information can then be propagated to user
  space.

  When the driver decides to unoffload a netdevice, it can use a
  newly-added function, netdev_offload_xstats_report_delta(), to record
  outstanding collected statistics, before destroying the HW counter.

This patch adds a helper, call_netdevice_notifiers_info_robust(), for
dispatching a notifier with the possibility of unwind when one of the
consumers bails. Given the wish to eventually get rid of the global
notifier block altogether, this helper only invokes the per-netns notifier
block.
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Obtaining stats for the IFLA_STATS_LINK_OFFLOAD_XSTATS nest involves a HW
access, and can fail for more reasons than just netlink message size
exhaustion. Therefore do not always return -EMSGSIZE on the failure path,
but respect the error code provided by the callee. Set the error explicitly
where it is reasonable to assume -EMSGSIZE as the failure reason.
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Later patches add handlers for more HW-backed statistics. An extack will be
useful when communicating HW / driver errors to the client. Add the
arguments as appropriate.
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The filter_mask field of RTM_GETSTATS header determines which top-level
attributes should be included in the netlink response. This saves
processing time by only including the bits that the user cares about
instead of always dumping everything. This is doubly important for
HW-backed statistics that would typically require a trip to the device to
fetch the stats.

So far there was only one HW-backed stat suite per attribute. However,
IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in
the following patches. It would therefore be advantageous to be able to
filter within that nest, and select just one or the other HW-backed
statistics suite.

Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload.
The scheme is as follows:

    - RTM_GETSTATS
	- struct if_stats_msg
	- attr nest IFLA_STATS_GET_FILTERS
	    - attr IFLA_STATS_LINK_OFFLOAD_XSTATS
		- u32 filter_mask

This scheme reuses the existing enumerators by nesting them in a dedicated
context attribute. This is covered by policies as usual, therefore a
gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS
nest has filtering enabled, because for the SW counters the issue does not
seem to be that important.

rtnl_offload_xstats_get_size() and _fill() are extended to observe the
requested filters.
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The IFLA_STATS_LINK_OFFLOAD_XSTATS attribute is a nest whose child
attributes carry various special hardware statistics. The code that handles
this nest was written with the idea that all these statistics would be
exposed by the device driver of a physical netdevice.

In the following patches, a new attribute is added to the abovementioned
nest, which however can be defined for some soft netdevices. The NDO-based
approach to querying these does not work, because it is not the soft
netdevice driver that exposes these statistics, but an offloading NIC
driver that does so.

The current code does not scale well to this usage. Simply rewrite it back
to the pattern seen in other fill-like and get_size-like functions
elsewhere.

Extract to helpers the code that is concerned with handling specifically
NDO-backed statistics so that it can be easily reused should more such
statistics be added.
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The currently used names rtnl_get_offload_stats() and
rtnl_get_offload_stats_size() do not clearly show the namespace. The former
function additionally seems to have been named this way in accordance with
the NDO name, as opposed to the naming used in the rtnetlink.c file (and
indeed elsewhere in the netlink handling code). As more and
differently-flavored attributes are introduced, a common clear prefix is
needed for all related functions.

Rename the functions to follow the rtnl_offload_xstats_* naming scheme.
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Today when VFs are put in promiscuous mode, they can request PF
to configure device for them to receive all VLANs traffic regardless
of what vlan is configured by the PF (via ip link) and PF allows this
config request regardless of whether VF is trusted or not.

From security POV, when VLAN is configured for VF through PF (via ip link),
honour such config requests from VF only when they are configured to be
trusted, otherwise restrict such VFs vlan promisc mode config.

Cc: stable@vger.kernel.org
Fixes: f990c82c ("qed*: Add support for ndo_set_vf_trust")
Signed-off-by: NManish Chopra <manishc@marvell.com>
Signed-off-by: NAriel Elior <aelior@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver does support SR-IOV VFs trust configuration but
it does not display it when queried via ip link utility.

Cc: stable@vger.kernel.org
Fixes: f990c82c ("qed*: Add support for ndo_set_vf_trust")
Signed-off-by: NManish Chopra <manishc@marvell.com>
Signed-off-by: NAriel Elior <aelior@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

@ 2022-03-02 10:39 Bhupesh Sharma
  2022-03-02 10:39 ` [PATCH v2 1/2 net-next] net: stmmac: Add support for SM8150 Bhupesh Sharma
  2022-03-02 10:39 ` [PATCH v2 2/2 net-next] net: stmmac: dwmac-qcom-ethqos: Adjust rgmii loopback_en per platform Bhupesh Sharma
  0 siblings, 2 replies; 3+ messages in thread
Bhupesh Sharma says:

====================
net: stmmac: Enable support for Qualcomm SA8155p-ADP board

Changes since v1:
-----------------
- v1 can be seen here: https://lore.kernel.org/netdev/20220126221725.710167-1-bhupesh.sharma@linaro.org/t/
- Fixed review comments from Bjorn - broke the v1 series into two
  separate series - one each for 'net' tree and 'arm clock/dts' tree
  - so as to ease review of the same from the respective maintainers.
- This series is intended for the 'net' tree.

The SA8155p-ADP board supports on-board ethernet (Gibabit Interface),
with support for both RGMII and RMII buses.

This patchset adds the support for the same.

Note that this patchset is based on an earlier sent patchset
for adding PDC controller support on SM8150 (see [1]).

[1]. https://lore.kernel.org/linux-arm-msm/20220226184028.111566-1-bhupesh.sharma@linaro.org/T/
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not all platforms should have RGMII_CONFIG_LOOPBACK_EN and the result it
about 50% packet loss on incoming messages. So make it possile to
configure this per compatible and enable it for QCS404.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds compatible, POR config & driver data for ethernet controller
found in SM8150 SoC.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
[bhsharma: Massage the commit log and other cosmetic changes]
Signed-off-by: NBhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Joe Damato says:

====================
page_pool: Add stats counters

Greetings:

Welcome to v9.

This revisions adds a commit which updates the page_pool documentation to
describe the stats API, structures, and fields.

Additionally, this revision contains a minor cosmetic change suggested by
Saeed in page_pool_recycle_in_ring in commit 2: "page_pool: Add recycle
stats", which removes an unnecessary #ifdef.

There are no functional changes in this revision.

Benchmark output from the v7 cover [1] is pasted below, as it is still
relevant since no functional changes have been made in this revision:

Benchmarks have been re-run. As always, results between runs are highly
variable; you'll find results showing that stats disabled are both faster
and slower than stats enabled in back to back benchmark runs.

Raw benchmark output with stats off [2] and stats on [3] are available for
examination.

Test system:
	- 2x Intel(R) Xeon(R) Gold 6140 CPU @ 2.30GHz
	- 2 NUMA zones, with 18 cores per zone and 2 threads per core

bench_page_pool_simple results, loops=200000000
test name			stats enabled		stats disabled
				cycles	nanosec		cycles	nanosec

for_loop			0	0.335		0	0.336
atomic_inc 			14	6.106		13	6.022
lock				30	13.365		32	13.968

no-softirq-page_pool01		75	32.884		74	32.308
no-softirq-page_pool02		79	34.696		74	32.302
no-softirq-page_pool03		110	48.005		105	46.073

tasklet_page_pool01_fast_path	14	6.156		14	6.211
tasklet_page_pool02_ptr_ring	41	18.028		39	17.391
tasklet_page_pool03_slow	107	46.646		105	46.123

bench_page_pool_cross_cpu results, loops=20000000 returning_cpus=4:
test name			stats enabled		stats disabled
				cycles	nanosec		cycles	nanosec

page_pool_cross_cpu CPU(0)	3973	1731.596	4015	1750.015
page_pool_cross_cpu CPU(1)	3976	1733.217	4022	1752.864
page_pool_cross_cpu CPU(2)	3973	1731.615	4016	1750.433
page_pool_cross_cpu CPU(3)	3976	1733.218	4021	1752.806
page_pool_cross_cpu CPU(4)	994	433.305		1005	438.217

page_pool_cross_cpu average	3378	-		3415	-

bench_page_pool_cross_cpu results, loops=20000000 returning_cpus=8:
test name			stats enabled		stats disabled
				cycles	nanosec		cycles	nanosec

page_pool_cross_cpu CPU(0)	6969	3037.488	6909	3011.463
page_pool_cross_cpu CPU(1)	6974	3039.469	6913	3012.961
page_pool_cross_cpu CPU(2)	6969	3037.575	6910	3011.585
page_pool_cross_cpu CPU(3)	6974	3039.415	6913	3012.961
page_pool_cross_cpu CPU(4)	6969	3037.288	6909	3011.368
page_pool_cross_cpu CPU(5)	6972	3038.732	6913	3012.920
page_pool_cross_cpu CPU(6)	6969	3037.350	6909	3011.386
page_pool_cross_cpu CPU(7)	6973	3039.356	6913	3012.921
page_pool_cross_cpu CPU(8)	871	379.934		864	376.620

page_pool_cross_cpu average	6293	-		6239	-

Thanks.

[1]: https://lore.kernel.org/all/1645810914-35485-1-git-send-email-jdamato@fastly.com/
[2]: https://gist.githubusercontent.com/jdamato-fsly/d7c34b9fa7be1ce132a266b0f2b92aea/raw/327dcd71d11ece10238fbf19e0472afbcbf22fd4/v7_stats_disabled
[3]: https://gist.githubusercontent.com/jdamato-fsly/d7c34b9fa7be1ce132a266b0f2b92aea/raw/327dcd71d11ece10238fbf19e0472afbcbf22fd4/v7_stats_enabled

v8 -> v9:
	- Add documentation about the page_pool_get_stats API, stats
	  structures, and fields to Documentation/networking/page_pool.rst.
	- Remove unnecessary #ifdef in page_pool_recycle_in_ring.

v7 -> v8:
	- Rename mlx5 ethtool stats so that users have a better idea of
	  their meaning.

v6 -> v7:
	- stats split out into two structs one single per-page pool struct
	  for allocation path stats and one per-cpu pointer for recycle
	  path stats.
	- page_pool_get_stats updated to use a wrapper struct to gather
	  stats for allocation and recycle stats with a single argument.
	- placement of structs adjusted
	- mlx5 driver modified to use page_pool_get_stats API

v5 -> v6:
	- Per cpu page_pool_stats struct pointer is now marked as
	  ____cacheline_aligned_in_smp. Placement of the field in the
	  struct is unchanged; it is the last field.

v4 -> v5:
	- Fixed the description of the kernel option in Kconfig.
	- Squashed commits 1-10 from v4 into a single commit for easier
	  review.
	- Changed the comment style of the comment for
	  the this_cpu_inc_alloc_stat macro.
	- Changed the return type of page_pool_get_stats from struct
	  page_pool_stat * to bool.

v3 -> v4:
	- Restructured stats to be per-cpu per-pool.
	- Global stats and proc file were removed.
	- Exposed an API (page_pool_get_stats) for batching the pool stats.

v2 -> v3:
	- patch 8/10 ("Add stat tracking cache refill") fixed placement of
	  counter increment.
	- patch 10/10 ("net-procfs: Show page pool stats in proc") updated:
		- fix unused label warning from kernel test robot,
		- fixed page_pool_seq_show to only display the refill stat
		  once,
		- added a remove_proc_entry for page_pool_stat to
		  dev_proc_net_exit.

v1 -> v2:
	- A new kernel config option has been added, which defaults to N,
	   preventing this code from being compiled in by default
	- The stats structure has been converted to a per-cpu structure
	- The stats are now exported via proc (/proc/net/page_pool_stat)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change adds support for the page_pool_get_stats API to mlx5. If the
user has enabled CONFIG_PAGE_POOL_STATS in their kernel, ethtool will
output page pool stats.
Signed-off-by: NJoe Damato <jdamato@fastly.com>
Acked-by: NSaeed Mahameed <saeed@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the new stats API, kernel config parameter, and stats structure
information to the page_pool documentation.
Signed-off-by: NJoe Damato <jdamato@fastly.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds a function page_pool_get_stats which can be used by drivers to obtain
stats for a specified page_pool.
Signed-off-by: NJoe Damato <jdamato@fastly.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add per-cpu stats tracking page pool recycling events:
	- cached: recycling placed page in the page pool cache
	- cache_full: page pool cache was full
	- ring: page placed into the ptr ring
	- ring_full: page released from page pool because the ptr ring was full
	- released_refcnt: page released (and not recycled) because refcnt > 1
Signed-off-by: NJoe Damato <jdamato@fastly.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add per-pool statistics counters for the allocation path of a page pool.
These stats are incremented in softirq context, so no locking or per-cpu
variables are needed.

This code is disabled by default and a kernel config option is provided for
users who wish to enable them.

The statistics added are:
	- fast: successful fast path allocations
	- slow: slow path order-0 allocations
	- slow_high_order: slow path high order allocations
	- empty: ptr ring is empty, so a slow path allocation was forced.
	- refill: an allocation which triggered a refill of the cache
	- waive: pages obtained from the ptr ring that cannot be added to
	  the cache due to a NUMA mismatch.
Signed-off-by: NJoe Damato <jdamato@fastly.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Last tcp_write_queue_head() use was removed in commit
114f39fe ("tcp: restore autocorking"), so remove it.
Signed-off-by: NTao Chen <chentao3@hotmail.com>
Link: https://lore.kernel.org/r/SYZP282MB33317DEE1253B37C0F57231E86029@SYZP282MB3331.AUSP282.PROD.OUTLOOK.COMSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Network drivers such as igb or igc call eth_get_headlen() to determine the
header length for their to be constructed skbs in receive path.

When running HSR on top of these drivers, it results in triggering BUG_ON() in
skb_pull(). The reason is the skb headlen is not sufficient for HSR to work
correctly. skb_pull() notices that.

For instance, eth_get_headlen() returns 14 bytes for TCP traffic over HSR which
is not correct. The problem is, the flow dissection code does not take HSR into
account. Therefore, add support for it.
Reported-by: NAnthony Harivel <anthony.harivel@linutronix.de>
Signed-off-by: NKurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20220228195856.88187-1-kurt@linutronix.deSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Add support for direct RMII MAC mode. This allows hardware with CPU port
connected in direct 100M fixed link to work properly.
Signed-off-by: NBaruch Siach <baruch.siach@siklu.com>
Link: https://lore.kernel.org/r/a962d1ccbeec42daa10dd8aff0e66e31f0faf1eb.1646050203.git.baruch@tkos.co.ilSigned-off-by: NJakub Kicinski <kuba@kernel.org>

When the given cmode has no serdes, mv88e6xxx_serdes_get_lane() returns
-NODEV. Earlier in the same function the code skips serdes handing in
this case. Do the same after cmode set.
Signed-off-by: NBaruch Siach <baruch.siach@siklu.com>
Link: https://lore.kernel.org/r/cd95cf3422ae8daf297a01fa9ec3931b203cdf45.1646050203.git.baruch@tkos.co.ilSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Eliminate the following coccicheck warning:
./net/openvswitch/flow.c:379:2-3: Unneeded semicolon
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220227132208.24658-1-yang.lee@linux.alibaba.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Add extack message to return exact message to user when adding invalid
filter with conflict flags for TC action.

In previous implement we just return EINVAL which is confusing for user.
Signed-off-by: NBaowen Zheng <baowen.zheng@corigine.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Link: https://lore.kernel.org/r/1646191769-17761-1-git-send-email-baowen.zheng@corigine.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
40GbE Intel Wired LAN Driver Updates 2022-03-01

This series contains updates to iavf driver only.

Mateusz adds support for interrupt moderation for 50G and 100G speeds
as well as support for the driver to specify a request as its primary
MAC address. He also refactors VLAN V2 capability exchange into more
generic extended capabilities to ease the addition of future
capabilities. Finally, he corrects the incorrect return of iavf_status
values and removes non-inclusive language.

Minghao Chi removes unneeded variables, instead returning values
directly.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  iavf: Remove non-inclusive language
  iavf: Fix incorrect use of assigning iavf_status to int
  iavf: stop leaking iavf_status as "errno" values
  iavf: remove redundant ret variable
  iavf: Add usage of new virtchnl format to set default MAC
  iavf: refactor processing of VLAN V2 capability message
  iavf: Add support for 50G/100G in AIM algorithm
====================

Link: https://lore.kernel.org/r/20220301185939.3005116-1-anthony.l.nguyen@intel.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Use ida_alloc_xxx()/ida_free() instead to
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NSimon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220301131212.26348-1-simon.horman@corigine.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Convert sfp to use %pe for printing error codes, which can print them
as errno symbols rather than numbers.
Signed-off-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1nOyEN-00BuuE-OB@rmk-PC.armlinux.org.ukSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Convert phylink to use %pe for printing error codes, which can print
them as errno symbols rather than numbers.
Signed-off-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1nOyEI-00Buu8-K9@rmk-PC.armlinux.org.ukSigned-off-by: NJakub Kicinski <kuba@kernel.org>

In patch [1], tun_msg_ctl was added to allow pass batched xdp buffers to
tun_sendmsg. Although we donot use msg_controllen in this path, we should
check msg_controllen to make sure the caller pass a valid msg_ctl.

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fe8dd45bb7556246c6b76277b1ba4296c91c2505Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Suggested-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NHarold Huang <baymaxhuang@gmail.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220303022441.383865-1-baymaxhuang@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Simon Wunderlich says:

====================
This cleanup patchset includes the following patches:

 - bump version strings, by Simon Wunderlich

 - Remove redundant 'flush_workqueue()' calls, by Christophe JAILLET

 - Migrate to linux/container_of.h, by Sven Eckelmann

 - Demote batadv-on-batadv skip error message, by Sven Eckelmann

* tag 'batadv-next-pullrequest-20220302' of git://git.open-mesh.org/linux-merge:
  batman-adv: Demote batadv-on-batadv skip error message
  batman-adv: Migrate to linux/container_of.h
  batman-adv: Remove redundant 'flush_workqueue()' calls
  batman-adv: Start new development cycle
====================

Link: https://lore.kernel.org/r/20220302163522.102842-1-sw@simonwunderlich.deSigned-off-by: NJakub Kicinski <kuba@kernel.org>

add missing ")" which caused by previous commit.

Fixes: 61c4fb9c ("net: hamradio: use time_is_after_jiffies() instead of open coding it")
Link: https://lore.kernel.org/all/1646018012-61129-1-git-send-email-wangqing@vivo.com/Signed-off-by: NWang Qing <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1646203277-83159-1-git-send-email-wangqing@vivo.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>