selftests: forwarding: hw_stats_l3: Add a new test

Add a test that verifies operation of L3 HW statistics.
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tools/testing/selftests/net/forwarding/hw_stats_l3.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +--------------------+                     +----------------------+
+# | H1                 |                     |                   H2 |
+# |                    |                     |                      |
+# |          $h1.200 + |                     | + $h2.200            |
+# |     192.0.2.1/28 | |                     | | 192.0.2.18/28      |
+# | 2001:db8:1::1/64 | |                     | | 2001:db8:2::1/64   |
+# |                  | |                     | |                    |
+# |              $h1 + |                     | + $h2                |
+# |                  | |                     | |                    |
+# +------------------|-+                     +-|--------------------+
+#                    |                         |
+# +------------------|-------------------------|--------------------+
+# | SW               |                         |                    |
+# |                  |                         |                    |
+# |             $rp1 +                         + $rp2               |
+# |                  |                         |                    |
+# |         $rp1.200 +                         + $rp2.200           |
+# |     192.0.2.2/28                             192.0.2.17/28      |
+# | 2001:db8:1::2/64                             2001:db8:2::2/64   |
+# |                                                                 |
+# +-----------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	test_stats_rx_ipv4
+	test_stats_tx_ipv4
+	test_stats_rx_ipv6
+	test_stats_tx_ipv6
+	respin_enablement
+	test_stats_rx_ipv4
+	test_stats_tx_ipv4
+	test_stats_rx_ipv6
+	test_stats_tx_ipv6
+	reapply_config
+	ping_ipv4
+	ping_ipv6
+	test_stats_rx_ipv4
+	test_stats_tx_ipv4
+	test_stats_rx_ipv6
+	test_stats_tx_ipv6
+	test_stats_report_rx
+	test_stats_report_tx
+	test_destroy_enabled
+	test_double_enable
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	vlan_create $h1 200 v$h1 192.0.2.1/28 2001:db8:1::1/64
+	ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2
+	ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+	ip -6 route del 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+	ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2
+	vlan_destroy $h1 200
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	vlan_create $h2 200 v$h2 192.0.2.18/28 2001:db8:2::1/64
+	ip route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17
+	ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2
+}
+
+h2_destroy()
+{
+	ip -6 route del 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2
+	ip route del 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17
+	vlan_destroy $h2 200
+	simple_if_fini $h2
+}
+
+router_rp1_200_create()
+{
+	ip link add name $rp1.200 up \
+		link $rp1 addrgenmode eui64 type vlan id 200
+	ip address add dev $rp1.200 192.0.2.2/28
+	ip address add dev $rp1.200 2001:db8:1::2/64
+	ip stats set dev $rp1.200 l3_stats on
+}
+
+router_rp1_200_destroy()
+{
+	ip stats set dev $rp1.200 l3_stats off
+	ip address del dev $rp1.200 2001:db8:1::2/64
+	ip address del dev $rp1.200 192.0.2.2/28
+	ip link del dev $rp1.200
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	router_rp1_200_create
+
+	ip link set dev $rp2 up
+	vlan_create $rp2 200 "" 192.0.2.17/28 2001:db8:2::2/64
+}
+
+router_destroy()
+{
+	vlan_destroy $rp2 200
+	ip link set dev $rp2 down
+
+	router_rp1_200_destroy
+	ip link set dev $rp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1mac=$(mac_get $rp1)
+	rp2mac=$(mac_get $rp2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1.200 192.0.2.18 " IPv4"
+}
+
+ping_ipv6()
+{
+	ping_test $h1.200 2001:db8:2::1 " IPv6"
+}
+
+get_l3_stat()
+{
+	local selector=$1; shift
+
+	ip -j stats show dev $rp1.200 group offload subgroup l3_stats |
+		  jq '.[0].stats64.'$selector
+}
+
+send_packets_rx_ipv4()
+{
+	# Send 21 packets instead of 20, because the first one might trap and go
+	# through the SW datapath, which might not bump the HW counter.
+	$MZ $h1.200 -c 21 -d 20msec -p 100 \
+	    -a own -b $rp1mac -A 192.0.2.1 -B 192.0.2.18 \
+	    -q -t udp sp=54321,dp=12345
+}
+
+send_packets_rx_ipv6()
+{
+	$MZ $h1.200 -6 -c 21 -d 20msec -p 100 \
+	    -a own -b $rp1mac -A 2001:db8:1::1 -B 2001:db8:2::1 \
+	    -q -t udp sp=54321,dp=12345
+}
+
+send_packets_tx_ipv4()
+{
+	$MZ $h2.200 -c 21 -d 20msec -p 100 \
+	    -a own -b $rp2mac -A 192.0.2.18 -B 192.0.2.1 \
+	    -q -t udp sp=54321,dp=12345
+}
+
+send_packets_tx_ipv6()
+{
+	$MZ $h2.200 -6 -c 21 -d 20msec -p 100 \
+	    -a own -b $rp2mac -A 2001:db8:2::1 -B 2001:db8:1::1 \
+	    -q -t udp sp=54321,dp=12345
+}
+
+___test_stats()
+{
+	local dir=$1; shift
+	local prot=$1; shift
+
+	local a
+	local b
+
+	a=$(get_l3_stat ${dir}.packets)
+	send_packets_${dir}_${prot}
+	"$@"
+	b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \
+		       get_l3_stat ${dir}.packets)
+	check_err $? "Traffic not reflected in the counter: $a -> $b"
+}
+
+__test_stats()
+{
+	local dir=$1; shift
+	local prot=$1; shift
+
+	RET=0
+	___test_stats "$dir" "$prot"
+	log_test "Test $dir packets: $prot"
+}
+
+test_stats_rx_ipv4()
+{
+	__test_stats rx ipv4
+}
+
+test_stats_tx_ipv4()
+{
+	__test_stats tx ipv4
+}
+
+test_stats_rx_ipv6()
+{
+	__test_stats rx ipv6
+}
+
+test_stats_tx_ipv6()
+{
+	__test_stats tx ipv6
+}
+
+# Make sure everything works well even after stats have been disabled and
+# reenabled on the same device without touching the L3 configuration.
+respin_enablement()
+{
+	log_info "Turning stats off and on again"
+	ip stats set dev $rp1.200 l3_stats off
+	ip stats set dev $rp1.200 l3_stats on
+}
+
+# For the initial run, l3_stats is enabled on a completely set up netdevice. Now
+# do it the other way around: enabling the L3 stats on an L2 netdevice, and only
+# then apply the L3 configuration.
+reapply_config()
+{
+	log_info "Reapplying configuration"
+
+	router_rp1_200_destroy
+
+	ip link add name $rp1.200 link $rp1 addrgenmode none type vlan id 200
+	ip stats set dev $rp1.200 l3_stats on
+	ip link set dev $rp1.200 up addrgenmode eui64
+	ip address add dev $rp1.200 192.0.2.2/28
+	ip address add dev $rp1.200 2001:db8:1::2/64
+}
+
+__test_stats_report()
+{
+	local dir=$1; shift
+	local prot=$1; shift
+
+	local a
+	local b
+
+	RET=0
+
+	a=$(get_l3_stat ${dir}.packets)
+	send_packets_${dir}_${prot}
+	ip address flush dev $rp1.200
+	b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \
+		       get_l3_stat ${dir}.packets)
+	check_err $? "Traffic not reflected in the counter: $a -> $b"
+	log_test "Test ${dir} packets: stats pushed on loss of L3"
+
+	ip stats set dev $rp1.200 l3_stats off
+	ip link del dev $rp1.200
+	router_rp1_200_create
+}
+
+test_stats_report_rx()
+{
+	__test_stats_report rx ipv4
+}
+
+test_stats_report_tx()
+{
+	__test_stats_report tx ipv4
+}
+
+test_destroy_enabled()
+{
+	RET=0
+
+	ip link del dev $rp1.200
+	router_rp1_200_create
+
+	log_test "Destroy l3_stats-enabled netdev"
+}
+
+test_double_enable()
+{
+	RET=0
+	___test_stats rx ipv4 \
+		ip stats set dev $rp1.200 l3_stats on
+	log_test "Test stat retention across a spurious enablement"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS