stable inclusion
from stable-v5.10.137
commit da7f731f2ed5b4a082567967ce74be274aab2daf
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=da7f731f2ed5b4a082567967ce74be274aab2daf

--------------------------------

[ Upstream commit a447e38a ]

Drop vmx_set_cr4()'s explicit check on the 'nested' module param now
that common x86 handles the check by incorporating VMXE into the CR4
reserved bits, via kvm_cpu_caps.  X86_FEATURE_VMX is set in kvm_cpu_caps
(by vmx_set_cpu_caps()), if and only if 'nested' is true.

No functional change intended.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201007014417.29276-3-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 8b8b376903b32d3d854f39eeebe018169c920cb6
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8b8b376903b32d3d854f39eeebe018169c920cb6

--------------------------------

[ Upstream commit d3a9e414 ]

Drop vmx_set_cr4()'s somewhat hidden guest_cpuid_has() check on VMXE now
that common x86 handles the check by incorporating VMXE into the CR4
reserved bits, i.e. in cr4_guest_rsvd_bits.  This fixes a bug where KVM
incorrectly rejects KVM_SET_SREGS with CR4.VMXE=1 if it's executed
before KVM_SET_CPUID{,2}.

Fixes: 5e1746d6 ("KVM: nVMX: Allow setting the VMXE bit in CR4")
Reported-by: NStas Sergeev <stsp@users.sourceforge.net>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201007014417.29276-2-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit b58294ce1a8ac8e234abd991255b1d1905520aed
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b58294ce1a8ac8e234abd991255b1d1905520aed

--------------------------------

[ Upstream commit 92dcd3d3 ]

In order to be able to experiment with suspend in UML, add the
minimal work to be able to suspend (s2idle) an instance of UML,
and be able to wake it back up from that state with the USR1
signal sent to the main UML process.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Acked-By: NAnton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 539c20ad260ef0f8cd3188e1950b018fff9a631b
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=539c20ad260ef0f8cd3188e1950b018fff9a631b

--------------------------------

[ Upstream commit 0828c4a3 ]

commit e23a8020 ("s390/kexec_file: Signature verification prototype")
adds support for KEXEC_SIG verification with keys from platform keyring
but the built-in keys and secondary keyring are not used.

Add support for the built-in keys and secondary keyring as x86 does.

Fixes: e23a8020 ("s390/kexec_file: Signature verification prototype")
Cc: stable@vger.kernel.org
Cc: Philipp Rudo <prudo@linux.ibm.com>
Cc: kexec@lists.infradead.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Signed-off-by: NMichal Suchanek <msuchanek@suse.de>
Reviewed-by: N"Lee, Chun-Yi" <jlee@suse.com>
Acked-by: NBaoquan He <bhe@redhat.com>
Signed-off-by: NCoiby Xu <coxu@redhat.com>
Acked-by: NHeiko Carstens <hca@linux.ibm.com>
Signed-off-by: NMimi Zohar <zohar@linux.ibm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit e7ccee2f09b06303fb39f8cb19a2c21d388dc4e6
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e7ccee2f09b06303fb39f8cb19a2c21d388dc4e6

--------------------------------

[ Upstream commit 2368048b ]

Return '1', not '-1', when handling an illegal WRMSR to a MCi_CTL or
MCi_STATUS MSR.  The behavior of "all zeros' or "all ones" for CTL MSRs
is architectural, as is the "only zeros" behavior for STATUS MSRs.  I.e.
the intent is to inject a #GP, not exit to userspace due to an unhandled
emulation case.  Returning '-1' gets interpreted as -EPERM up the stack
and effecitvely kills the guest.

Fixes: 890ca9ae ("KVM: Add MCE support")
Fixes: 9ffd986c ("KVM: X86: #GP when guest attempts to write MCi_STATUS register w/o 0")
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <seanjc@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20220512222716.4112548-2-seanjc@google.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit f5385a590df78d7649876a2087646090e867e6eb
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f5385a590df78d7649876a2087646090e867e6eb

--------------------------------

[ Upstream commit 0471a7bd ]

Certain guest operating systems (e.g., UNIXWARE) clear bit 0 of
MC1_CTL to ignore single-bit ECC data errors.  Single-bit ECC data
errors are always correctable and thus are safe to ignore because they
are informational in nature rather than signaling a loss of data
integrity.

Prior to this patch, these guests would crash upon writing MC1_CTL,
with resultant error messages like the following:

error: kvm run failed Operation not permitted
EAX=fffffffe EBX=fffffffe ECX=00000404 EDX=ffffffff
ESI=ffffffff EDI=00000001 EBP=fffdaba4 ESP=fffdab20
EIP=c01333a5 EFL=00000246 [---Z-P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0108 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
CS =0100 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA]
SS =0108 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
DS =0108 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
FS =0000 00000000 ffffffff 00c00000
GS =0000 00000000 ffffffff 00c00000
LDT=0118 c1026390 00000047 00008200 DPL=0 LDT
TR =0110 ffff5af0 00000067 00008b00 DPL=0 TSS32-busy
GDT=     ffff5020 000002cf
IDT=     ffff52f0 000007ff
CR0=8001003b CR2=00000000 CR3=0100a000 CR4=00000230
DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000
DR6=ffff0ff0 DR7=00000400
EFER=0000000000000000
Code=08 89 01 89 51 04 c3 8b 4c 24 08 8b 01 8b 51 04 8b 4c 24 04 <0f>
30 c3 f7 05 a4 6d ff ff 10 00 00 00 74 03 0f 31 c3 33 c0 33 d2 c3 8d
74 26 00 0f 31 c3
Signed-off-by: NLev Kujawski <lkujaw@member.fsf.org>
Message-Id: <20220521081511.187388-1-lkujaw@member.fsf.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit ce19182b43a524e604773d75cc5e9f614afe64a1
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ce19182b43a524e604773d75cc5e9f614afe64a1

--------------------------------

commit 3a2ba42c upstream.

The bitops compile-time optimization series revealed one more
problem in olpc-xo1-sci.c:send_ebook_state(), resulted in GCC
warnings:

arch/x86/platform/olpc/olpc-xo1-sci.c: In function 'send_ebook_state':
arch/x86/platform/olpc/olpc-xo1-sci.c:83:63: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
   83 |         if (!!test_bit(SW_TABLET_MODE, ebook_switch_idev->sw) == state)
      |                                                               ^~
arch/x86/platform/olpc/olpc-xo1-sci.c:83:13: note: add parentheses around left hand side expression to silence this warning

Despite this code working as intended, this redundant double
negation of boolean value, together with comparing to `char`
with no explicit conversion to bool, makes compilers think
the author made some unintentional logical mistakes here.
Make it the other way around and negate the char instead
to silence the warnings.

Fixes: d2aa3741 ("x86/olpc/xo1/sci: Produce wakeup events for buttons and switches")
Cc: stable@vger.kernel.org # 3.5+
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-and-tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NAlexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: NYury Norov <yury.norov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 43e059d01628137ea9b9082483c4917856b336ae
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=43e059d01628137ea9b9082483c4917856b336ae

--------------------------------

commit ac6c1b2c upstream.

When a ftrace_bug happens (where ftrace fails to modify a location) it is
helpful to have what was at that location as well as what was expected to
be there.

But with the conversion to text_poke() the variable that assigns the
expected for debugging was dropped. Unfortunately, I noticed this when I
needed it. Add it back.

Link: https://lkml.kernel.org/r/20220726101851.069d2e70@gandalf.local.home

Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: 768ae440 ("x86/ftrace: Use text_poke()")
Signed-off-by: NSteven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit fd96b61389f8650d880df4b7f8f55f880c19bff9
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fd96b61389f8650d880df4b7f8f55f880c19bff9

--------------------------------

commit e6cfcdda upstream.

AMD's "Technical Guidance for Mitigating Branch Type Confusion,
Rev. 1.0 2022-07-12" whitepaper, under section 6.1.2 "IBPB On
Privileged Mode Entry / SMT Safety" says:

  Similar to the Jmp2Ret mitigation, if the code on the sibling thread
  cannot be trusted, software should set STIBP to 1 or disable SMT to
  ensure SMT safety when using this mitigation.

So, like already being done for retbleed=unret, and now also for
retbleed=ibpb, force STIBP on machines that have it, and report its SMT
vulnerability status accordingly.

 [ bp: Remove the "we" and remove "[AMD]" applicability parameter which
   doesn't work here. ]

Fixes: 3ebc1700 ("x86/bugs: Add retbleed=ibpb")
Signed-off-by: NKim Phillips <kim.phillips@amd.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # 5.10, 5.15, 5.19
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Link: https://lore.kernel.org/r/20220804192201.439596-1-kim.phillips@amd.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit a9943942a501114d5ea1093329e3b04da597b085
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a9943942a501114d5ea1093329e3b04da597b085

--------------------------------

[ Upstream commit de979c83 ]

With CONFIG_PREEMPTION disabled, arch/x86/entry/thunk_$(BITS).o becomes
an empty object file.

With some old versions of binutils (i.e., 2.35.90.20210113-1ubuntu1) the
GNU assembler doesn't generate a symbol table for empty object files and
objtool fails with the following error when a valid symbol table cannot
be found:

  arch/x86/entry/thunk_64.o: warning: objtool: missing symbol table

To prevent this from happening, build thunk_$(BITS).o only if
CONFIG_PREEMPTION is enabled.

BugLink: https://bugs.launchpad.net/bugs/1911359

Fixes: 320100a5 ("x86/entry: Remove the TRACE_IRQS cruft")
Signed-off-by: NAndrea Righi <andrea.righi@canonical.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/Ys/Ke7EWjcX+ZlXO@arighi-desktopSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 94398c1fec345b013d5d9c6ee1ec61c7487ac144
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=94398c1fec345b013d5d9c6ee1ec61c7487ac144

--------------------------------

[ Upstream commit 625395c4 ]

GCC-12 started triggering a new warning:

  arch/x86/mm/numa.c: In function ‘cpumask_of_node’:
  arch/x86/mm/numa.c:916:39: warning: the comparison will always evaluate as ‘false’ for the address of ‘node_to_cpumask_map’ will never be NULL [-Waddress]
    916 |         if (node_to_cpumask_map[node] == NULL) {
        |                                       ^~

node_to_cpumask_map is of type cpumask_var_t[].

When CONFIG_CPUMASK_OFFSTACK is set, cpumask_var_t is typedef'd to a
pointer for dynamic allocation, else to an array of one element. The
"wicked game" can be checked on line 700 of include/linux/cpumask.h.

The original code in debug_cpumask_set_cpu() and cpumask_of_node() were
probably written by the original authors with CONFIG_CPUMASK_OFFSTACK=y
(i.e. dynamic allocation) in mind, checking if the cpumask was available
via a direct NULL check.

When CONFIG_CPUMASK_OFFSTACK is not set, GCC gives the above warning
while compiling the kernel.

Fix that by using cpumask_available(), which does the NULL check when
CONFIG_CPUMASK_OFFSTACK is set, otherwise returns true. Use it wherever
such checks are made.

Conditional definitions of cpumask_available() can be found along with
the definition of cpumask_var_t. Check the cpumask.h reference mentioned
above.

Fixes: c032ef60 ("cpumask: convert node_to_cpumask_map[] to cpumask_var_t")
Fixes: de2d9445 ("x86: Unify node_to_cpumask_map handling between 32 and 64bit")
Signed-off-by: NSiddh Raman Pant <code@siddh.me>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20220731160913.632092-1-code@siddh.meSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit cadeb5186e253ba9e44284423621090f1e2420e6
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cadeb5186e253ba9e44284423621090f1e2420e6

--------------------------------

[ Upstream commit f4b39e88 ]

The recent change to the PHB numbering logic has a logic error in the
handling of "ibm,opal-phbid".

When an "ibm,opal-phbid" property is present, &prop is written to and
ret is set to zero.

The following call to of_alias_get_id() is skipped because ret == 0.

But then the if (ret >= 0) is true, and the body of that if statement
sets prop = ret which throws away the value that was just read from
"ibm,opal-phbid".

Fix the logic by only doing the ret >= 0 check in the of_alias_get_id()
case.

Fixes: 0fe1e96f ("powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias")
Reviewed-by: NPali Rohár <pali@kernel.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220802105723.1055178-1-mpe@ellerman.id.auSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 00dc7cbbb558955ff410fd392cc9b0366eb06df0
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=00dc7cbbb558955ff410fd392cc9b0366eb06df0

--------------------------------

[ Upstream commit df5d4b61 ]

of_get_next_parent() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
Add missing of_node_put() in the error path to avoid refcount leak.

Fixes: ce21b3c9 ("[CELL] add support for MSI on Axon-based Cell systems")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220605065129.63906-1-linmq006@gmail.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 6d1e53f7f181a11a8a343def1e0d0209905b7c64
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6d1e53f7f181a11a8a343def1e0d0209905b7c64

--------------------------------

[ Upstream commit 255b650c ]

of_find_node_by_path() returns a node pointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.

Fixes: eac1e731 ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220605053225.56125-1-linmq006@gmail.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 85aff6a9b7b7ec4e5c319f7946c9864c8d5e3d4a
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=85aff6a9b7b7ec4e5c319f7946c9864c8d5e3d4a

--------------------------------

[ Upstream commit 6ac059da ]

of_find_node_by_path() returns remote device nodepointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.

Fixes: 0afacde3 ("[POWERPC] spufs: allow isolated mode apps by starting the SPE loader")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220603121543.22884-1-linmq006@gmail.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 47a8fe1b154aa6d836582365b1c70684af8597e4
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=47a8fe1b154aa6d836582365b1c70684af8597e4

--------------------------------

[ Upstream commit 0fe1e96f ]

Other Linux architectures use DT property 'linux,pci-domain' for
specifying fixed PCI domain of PCI controller specified in Device-Tree.

And lot of Freescale powerpc boards have defined numbered pci alias in
Device-Tree for every PCIe controller which number specify preferred PCI
domain.

So prefer usage of DT property 'linux,pci-domain' (via function
of_get_pci_domain_nr()) and DT pci alias (via function
of_alias_get_id()) on powerpc architecture for assigning PCI domain to
PCI controller.

Fixes: 63a72284 ("powerpc/pci: Assign fixed PHB number based on device-tree properties")
Signed-off-by: NPali Rohár <pali@kernel.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220706102148.5060-2-pali@kernel.orgSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 7ac58a83d8f10baabbb38e4bec3140755ba305d4
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7ac58a83d8f10baabbb38e4bec3140755ba305d4

--------------------------------

[ Upstream commit 9be013b2 ]

Commit 0e00a8c9 ("powerpc: Allow CPU selection also on PPC32")
enlarged the CPU selection logic to PPC32 by removing depend to
PPC64, and failed to restrict that depend to E5500_CPU and E6500_CPU.
Fortunately that got unnoticed because -mcpu=8540 will override the
-mcpu=e500mc64 or -mpcu=e6500 as they are ealier, but that's
fragile and may no be right in the future.

Add back the depend PPC64 on E5500_CPU and E6500_CPU.

Fixes: 0e00a8c9 ("powerpc: Allow CPU selection also on PPC32")
Signed-off-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8abab4888da69ff78b73a56f64d9678a7bf684e9.1657549153.git.christophe.leroy@csgroup.euSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit ae921d176b6f4359ac7462406ea68293c8c1c84e
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ae921d176b6f4359ac7462406ea68293c8c1c84e

--------------------------------

[ Upstream commit dc306186 ]

Virtual addresses of vmcore_info and os_info members are
wrongly passed to copy_oldmem_kernel(), while the function
expects physical address of the source. Instead, __pa()
macro should have been applied.

Yet, use of __pa() macro could be somehow confusing, since
copy_oldmem_kernel() may treat the source as an offset, not
as a direct physical address (that depens from the oldmem
availability and location).

Fix the virtual vs physical address confusion and make the
way the old lowcore is read consistent across all sources.
Reviewed-by: NHeiko Carstens <hca@linux.ibm.com>
Signed-off-by: NAlexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: NVasily Gorbik <gor@linux.ibm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

powerpc/perf: Optimize clearing the pending PMI and remove WARN_ON for PMI check in power_pmu_disable

stable inclusion
from stable-v5.10.137
commit 875b2bf469d094754ac2ba9af91dcd529eb12bf6
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=875b2bf469d094754ac2ba9af91dcd529eb12bf6

--------------------------------

[ Upstream commit 890005a7 ]

commit 2c9ac51b ("powerpc/perf: Fix PMU callbacks to clear
pending PMI before resetting an overflown PMC") added a new
function "pmi_irq_pending" in hw_irq.h. This function is to check
if there is a PMI marked as pending in Paca (PACA_IRQ_PMI).This is
used in power_pmu_disable in a WARN_ON. The intention here is to
provide a warning if there is PMI pending, but no counter is found
overflown.

During some of the perf runs, below warning is hit:

WARNING: CPU: 36 PID: 0 at arch/powerpc/perf/core-book3s.c:1332 power_pmu_disable+0x25c/0x2c0
 Modules linked in:
 -----

 NIP [c000000000141c3c] power_pmu_disable+0x25c/0x2c0
 LR [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0
 Call Trace:
 [c000000baffcfb90] [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0 (unreliable)
 [c000000baffcfc10] [c0000000003e2f8c] perf_pmu_disable+0x4c/0x60
 [c000000baffcfc30] [c0000000003e3344] group_sched_out.part.124+0x44/0x100
 [c000000baffcfc80] [c0000000003e353c] __perf_event_disable+0x13c/0x240
 [c000000baffcfcd0] [c0000000003dd334] event_function+0xc4/0x140
 [c000000baffcfd20] [c0000000003d855c] remote_function+0x7c/0xa0
 [c000000baffcfd50] [c00000000026c394] flush_smp_call_function_queue+0xd4/0x300
 [c000000baffcfde0] [c000000000065b24] smp_ipi_demux_relaxed+0xa4/0x100
 [c000000baffcfe20] [c0000000000cb2b0] xive_muxed_ipi_action+0x20/0x40
 [c000000baffcfe40] [c000000000207c3c] __handle_irq_event_percpu+0x8c/0x250
 [c000000baffcfee0] [c000000000207e2c] handle_irq_event_percpu+0x2c/0xa0
 [c000000baffcff10] [c000000000210a04] handle_percpu_irq+0x84/0xc0
 [c000000baffcff40] [c000000000205f14] generic_handle_irq+0x54/0x80
 [c000000baffcff60] [c000000000015740] __do_irq+0x90/0x1d0
 [c000000baffcff90] [c000000000016990] __do_IRQ+0xc0/0x140
 [c0000009732f3940] [c000000bafceaca8] 0xc000000bafceaca8
 [c0000009732f39d0] [c000000000016b78] do_IRQ+0x168/0x1c0
 [c0000009732f3a00] [c0000000000090c8] hardware_interrupt_common_virt+0x218/0x220

This means that there is no PMC overflown among the active events
in the PMU, but there is a PMU pending in Paca. The function
"any_pmc_overflown" checks the PMCs on active events in
cpuhw->n_events. Code snippet:

<<>>
if (any_pmc_overflown(cpuhw))
 	clear_pmi_irq_pending();
 else
 	WARN_ON(pmi_irq_pending());
<<>>

Here the PMC overflown is not from active event. Example: When we do
perf record, default cycles and instructions will be running on PMC6
and PMC5 respectively. It could happen that overflowed event is currently
not active and pending PMI is for the inactive event. Debug logs from
trace_printk:

<<>>
any_pmc_overflown: idx is 5: pmc value is 0xd9a
power_pmu_disable: PMC1: 0x0, PMC2: 0x0, PMC3: 0x0, PMC4: 0x0, PMC5: 0xd9a, PMC6: 0x80002011
<<>>

Here active PMC (from idx) is PMC5 , but overflown PMC is PMC6(0x80002011).
When we handle PMI interrupt for such cases, if the PMC overflown is
from inactive event, it will be ignored. Reference commit:
commit bc09c219 ("powerpc/perf: Fix finding overflowed PMC in interrupt")

Patch addresses two changes:
1) Fix 1 : Removal of warning ( WARN_ON(pmi_irq_pending()); )
   We were printing warning if no PMC is found overflown among active PMU
   events, but PMI pending in PACA. But this could happen in cases where
   PMC overflown is not in active PMC. An inactive event could have caused
   the overflow. Hence the warning is not needed. To know pending PMI is
   from an inactive event, we need to loop through all PMC's which will
   cause more SPR reads via mfspr and increase in context switch. Also in
   existing function: perf_event_interrupt, already we ignore PMI's
   overflown when it is from an inactive PMC.

2) Fix 2: optimization in clearing pending PMI.
   Currently we check for any active PMC overflown before clearing PMI
   pending in Paca. This is causing additional SPR read also. From point 1,
   we know that if PMI pending in Paca from inactive cases, that is going
   to be ignored during replay. Hence if there is pending PMI in Paca, just
   clear it irrespective of PMC overflown or not.

In summary, remove the any_pmc_overflown check entirely in
power_pmu_disable. ie If there is a pending PMI in Paca, clear it, since
we are in pmu_disable. There could be cases where PMI is pending because
of inactive PMC ( which later when replayed also will get ignored ), so
WARN_ON could give false warning. Hence removing it.

Fixes: 2c9ac51b ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC")
Signed-off-by: NAthira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220522142256.24699-1-atrajeev@linux.vnet.ibm.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 993cd16211806666a649bbad2e507413a4f80864
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=993cd16211806666a649bbad2e507413a4f80864

--------------------------------

[ Upstream commit 9e70cbd1 ]

Initialising the hwrng struct with zeros causes a
compile-time sparse warning:

 $ ARCH=um make -j10 W=1 C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
 ...
 CHECK   arch/um/drivers/random.c
 arch/um/drivers/random.c:31:31: sparse: warning: Using plain integer as NULL pointer

Fix the warning by not initialising the hwrng struct
with zeros as it is initialised anyway during module
init.

Fixes: 72d3e093 ("um: random: Register random as hwrng-core device")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NChristopher Obbard <chris.obbard@collabora.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit d6d344eeef7ae6be1e018b82439f1504775cc177
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d6d344eeef7ae6be1e018b82439f1504775cc177

--------------------------------

[ Upstream commit 628ccfc8 ]

The 'pdev' and 'netdev' need to be released in error cases of
iss_net_configure().

Change the return type of iss_net_configure() to void, because it's
not used.

Fixes: 7282bee7 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 8")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit fb4c1555f93f11fd6188c62fdd2c0d22e09a3ff5
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fb4c1555f93f11fd6188c62fdd2c0d22e09a3ff5

--------------------------------

[ Upstream commit 8864fb83 ]

Provide release() callback for the platform device embedded into struct
iss_net_private and registered in the iss_net_configure so that
platform_device_unregister could be called for it.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 9d216035d173214cd33712d67d89220ef2283ebf
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9d216035d173214cd33712d67d89220ef2283ebf

--------------------------------

[ Upstream commit faa2f72c ]

Each secure guest must have a unique ASCE (address space control
element); we must avoid that new guests use the same page for their
ASCE, to avoid errors.

Since the ASCE mostly consists of the address of the topmost page table
(plus some flags), we must not return that memory to the pool unless
the ASCE is no longer in use.

Only a successful Destroy Secure Configuration UVC will make the ASCE
reusable again.

If the Destroy Configuration UVC fails, the ASCE cannot be reused for a
secure guest (either for the ASCE or for other memory areas). To avoid
a collision, it must not be used again. This is a permanent error and
the page becomes in practice unusable, so we set it aside and leak it.
On failure we already leak other memory that belongs to the ultravisor
(i.e. the variable and base storage for a guest) and not leaking the
topmost page table was an oversight.

This error (and thus the leakage) should not happen unless the hardware
is broken or KVM has some unknown serious bug.
Signed-off-by: NClaudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: 29b40f10 ("KVM: s390: protvirt: Add initial vm and cpu lifecycle handling")
Reviewed-by: NJanosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-2-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-2-imbrenda@linux.ibm.com>
Signed-off-by: NJanosch Frank <frankja@linux.ibm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 38715a0ccb55aef1017bbd038f8f420616c9a555
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=38715a0ccb55aef1017bbd038f8f420616c9a555

--------------------------------

[ Upstream commit 1c3ace2b ]

Although harmless, the return statement in kvm_unexpected_el2_exception
is rather confusing as the function itself has a void return type. The
C standard is also pretty clear that "A return statement with an
expression shall not appear in a function whose return type is void".
Given that this return statement does not seem to add any actual value,
let's not pointlessly violate the standard.

Build-tested with GCC 10 and CLANG 13 for good measure, the disassembled
code is identical with or without the return statement.

Fixes: e9ee186b ("KVM: arm64: Add kvm_extable for vaxorcism code")
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220705142310.3847918-1-qperret@google.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 64b1e3f90491177c81f86bed92f2053f29e41113
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=64b1e3f90491177c81f86bed92f2053f29e41113

--------------------------------

[ Upstream commit fac76f22 ]

Otherwise, we could fail to compile.

ld: arch/arm64/crypto/ghash-ce-glue.o: in function 'ghash_ce_mod_exit':
ghash-ce-glue.c:(.exit.text+0x24): undefined reference to 'crypto_unregister_aead'
ld: arch/arm64/crypto/ghash-ce-glue.o: in function 'ghash_ce_mod_init':
ghash-ce-glue.c:(.init.text+0x34): undefined reference to 'crypto_register_aead'

Fixes: 537c1445 ("crypto: arm64/gcm - implement native driver using v8 Crypto Extensions")
Signed-off-by: NQian Cai <quic_qiancai@quicinc.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit a1891d3df719ca372da2375a3933d3dce9ef80fc
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a1891d3df719ca372da2375a3933d3dce9ef80fc

--------------------------------

[ Upstream commit 58577966 ]

Currently the DT for QCS404 SoC has setup for 2 USB2 PHYs with one each
assigned to USB3 controller and USB2 controller. This assignment is
incorrect which only works by luck: as when each USB HCI comes up it
configures the *other* controllers PHY which is enough to make them
happy. If, for any reason, we were to disable one of the controllers then
both would stop working.

This was a difficult inconsistency to be caught which was found while
trying to enable USB support in u-boot. So with all the required drivers
ported to u-boot, I couldn't get the same USB storage device enumerated
in u-boot which was being enumerated fine by the kernel.

The root cause of the problem came out to be that I wasn't enabling USB2
PHY: "usb2_phy_prim" in u-boot. Then I realised that via simply disabling
the same USB2 PHY currently assigned to USB2 host controller in the
kernel disabled enumeration for USB3 host controller as well.

So fix this inconsistency by correctly assigning USB2 PHYs.

Fixes: 9375e7d7 ("arm64: dts: qcom: qcs404: Add USB devices and PHYs")
Signed-off-by: NSumit Garg <sumit.garg@linaro.org>
Reviewed-by: NDaniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220711083038.1518529-1-sumit.garg@linaro.orgSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 8dee22b4576dde8de322a4f7fa6107a3fa139acf
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8dee22b4576dde8de322a4f7fa6107a3fa139acf

--------------------------------

[ Upstream commit b415bb7c ]

Hook SDMMC1 CD up with CVM GPIO02 (SOC_GPIO11) used for card detection on J4
(uSD socket) on the carrier.

Fixes: ef633bfc ("arm64: tegra: Enable card detect for SD card on P2888")
Signed-off-by: NTamás Szűcs <tszucs@protonmail.ch>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit a1e2386909169276bd45cdc714f6d7ff943fe345
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a1e2386909169276bd45cdc714f6d7ff943fe345

--------------------------------

[ Upstream commit c98e6e68 ]

The bananapi R64 (BPI-R64) experiences wrong WPS button signals.
In OpenWrt pushing the WPS button while powering on the device will set
it to recovery mode. Currently, this also happens without any user
interaction. In particular, the wrong signals appear while booting the
device or restarting it, e.g. after doing a system upgrade. If the
device is in recovery mode the user needs to manually power cycle or
restart it.

The official BPI-R64 sources set the WPS button to GPIO_ACTIVE_LOW in
the device tree. This setting seems to suppress the unwanted WPS button
press signals. So this commit changes the button from GPIO_ACTIVE_HIGH to
GPIO_ACTIVE_LOW.

The official BPI-R64 sources can be found on
https://github.com/BPI-SINOVOIP/BPI-R64-openwrt

Fixes: 0b6286dd ("arm64: dts: mt7622: add bananapi BPI-R64 board")
Suggested-by: NINAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: NNick Hainke <vincent@systemli.org>
Link: https://lore.kernel.org/r/20220630111746.4098-1-vincent@systemli.orgSigned-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 7fcf4401d5390304bb84520939436d0e9ef1fa2b
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7fcf4401d5390304bb84520939436d0e9ef1fa2b

--------------------------------

[ Upstream commit e2759fa0 ]

The PM8841 temperature sensor has to define thermal-sensor-cells.

Fixes: dab8134c ("ARM: dts: qcom: Add PM8841 functions device nodes")
Signed-off-by: NKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220608112702.80873-2-krzysztof.kozlowski@linaro.orgSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 22e6d8bcde8e66b64f46bf9bd2d3d0f88d40c39f
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=22e6d8bcde8e66b64f46bf9bd2d3d0f88d40c39f

--------------------------------

[ Upstream commit d1ff2559 ]

of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.

Fixes: 00f7dc63 ("ARM: zynq: Add support for SOC_BUS")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220605082807.21526-1-linmq006@gmail.comSigned-off-by: NMichal Simek <michal.simek@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit d294d60dc68550fee0fbbe8a638d798dcd40b2c5
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d294d60dc68550fee0fbbe8a638d798dcd40b2c5

--------------------------------

[ Upstream commit 942228fb ]

of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: 1e037794 ("ARM: OMAP3+: PRM: register interrupt information from DT")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Message-Id: <20220526073724.21169-1-linmq006@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 14bac0c7035bf920e190a63c7e1b113c72eadbf4
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=14bac0c7035bf920e190a63c7e1b113c72eadbf4

--------------------------------

[ Upstream commit 9705db1e ]

omapdss_find_dss_of_node() calls of_find_compatible_node() to get device
node. of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() in later error path and normal path.

Fixes: e0c827ac ("drm/omap: Populate DSS children in omapdss driver")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Message-Id: <20220601044858.3352-1-linmq006@gmail.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit fdcb1fdbdc15634f12d4e9218e6d884fd1809872
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fdcb1fdbdc15634f12d4e9218e6d884fd1809872

--------------------------------

[ Upstream commit dc590cdc ]

'reg' property is required in SSBI children:
  qcom-mdm9615-wp8548-mangoh-green.dtb: gpio@150: 'reg' is a required property

Fixes: 2c5e5965 ("ARM: dts: Add MDM9615 dtsi")
Signed-off-by: NKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220507194913.261121-11-krzysztof.kozlowski@linaro.orgSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 87e415aec4e63577f7e8e3bd39f93285ec8d3a41
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=87e415aec4e63577f7e8e3bd39f93285ec8d3a41

--------------------------------

[ Upstream commit 506506ca ]

Commit b20d1ba3 ("arm64: cpufeature: allow for version discrepancy in
PMU implementations") made it possible to run Linux on a machine with PMUs
with different versions without tainting the kernel. The patch relaxed the
restriction only for the ID_AA64DFR0_EL1.PMUVer field, and missed doing the
same for ID_DFR0_EL1.PerfMon , which also reports the PMU version, but for
the AArch32 state.

For example, with Linux running on two clusters with different PMU
versions, the kernel is tainted when bringing up secondaries with the
following message:

[    0.097027] smp: Bringing up secondary CPUs ...
[..]
[    0.142805] Detected PIPT I-cache on CPU4
[    0.142805] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_DFR0_EL1. Boot CPU: 0x00000004011088, CPU4: 0x00000005011088
[    0.143555] CPU features: Unsupported CPU feature variation detected.
[    0.143702] GICv3: CPU4: found redistributor 10000 region 0:0x000000002f180000
[    0.143702] GICv3: CPU4: using allocated LPI pending table @0x00000008800d0000
[    0.144888] CPU4: Booted secondary processor 0x0000010000 [0x410fd0f0]

The boot CPU implements FEAT_PMUv3p1 (ID_DFR0_EL1.PerfMon, bits 27:24, is
0b0100), but CPU4, part of the other cluster, implements FEAT_PMUv3p4
(ID_DFR0_EL1.PerfMon = 0b0101).

Treat the PerfMon field as FTR_NONSTRICT and FTR_EXACT to pass the sanity
check and to match how PMUVer is treated for the 64bit ID register.

Fixes: b20d1ba3 ("arm64: cpufeature: allow for version discrepancy in PMU implementations")
Signed-off-by: NAlexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20220617111332.203061-1-alexandru.elisei@arm.comSigned-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 30119131e3acb0680f469fbfd91a34c001cac181
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=30119131e3acb0680f469fbfd91a34c001cac181

--------------------------------

[ Upstream commit 113616ec ]

Now that we handle all of the sections in a Hexagon defconfig, select
ARCH_WANT_LD_ORPHAN_WARN so that unhandled sections are warned about by
default.

Link: https://lkml.kernel.org/r/20210521011239.1332345-4-nathan@kernel.orgSigned-off-by: NNathan Chancellor <nathan@kernel.org>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Acked-by: NBrian Cain <bcain@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 9d744229cdbe5367fde3d83d706c508c0dc4cd9b
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9d744229cdbe5367fde3d83d706c508c0dc4cd9b

--------------------------------

[ Upstream commit aa5e0620 ]

The AST2600 EVB board should have dedicated compatible.

Fixes: 2ca5646b ("ARM: dts: aspeed: Add AST2600 and EVB")
Signed-off-by: NKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220529104928.79636-5-krzysztof.kozlowski@linaro.orgSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 75a24da2b9fee66b0c9c05ffac52418618219f2f
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=75a24da2b9fee66b0c9c05ffac52418618219f2f

--------------------------------

[ Upstream commit 30b276fc ]

The AST2500 EVB board should have dedicated compatible.

Fixes: 02440622 ("arm/dst: Add Aspeed ast2500 device tree")
Signed-off-by: NKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220529104928.79636-4-krzysztof.kozlowski@linaro.orgSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 6a28f363d3904713a0dd0e101c16bc656504d58f
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6a28f363d3904713a0dd0e101c16bc656504d58f

--------------------------------

[ Upstream commit 62e8a534 ]

"make dtbs_check":

    arch/arm64/boot/dts/renesas/r8a774c0-cat874.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[74], [0]] is too long
    arch/arm64/boot/dts/renesas/r8a774c0-ek874.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[79], [0]] is too long
    arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[82], [0]] is too long
    arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[87], [0]] is too long
    arch/arm64/boot/dts/renesas/r8a77990-ebisu.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[105], [0]] is too long
	    From schema: Documentation/devicetree/bindings/thermal/thermal-zones.yaml

Indeed, the thermal sensors on R-Car E3 and RZ/G2E support only a single
zone, hence #thermal-sensor-cells = <0>.

Fix this by dropping the bogus zero cell from the thermal sensor
specifiers.

Fixes: 8fa7d18f ("arm64: dts: renesas: r8a77990: Create thermal zone to support IPA")
Fixes: 8438bfda ("arm64: dts: renesas: r8a774c0: Create thermal zone to support IPA")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/28b812fdd1fc3698311fac984ab8b91d3d655c1c.1655301684.git.geert+renesas@glider.beSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 6771609e1933c5d2e5c272f0c9f07b18052a9c3d
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6771609e1933c5d2e5c272f0c9f07b18052a9c3d

--------------------------------

[ Upstream commit feedaacd ]

This driver uses GPIO descriptors to drive the touchscreen RESET line. In
the existing device trees this has in conflict with intution been flagged
as GPIO_ACTIVE_HIGH and the driver then applies the reverse action by
driving the line low (setting to 0) to enter reset state and driving the
line high (setting to 1) to get out of reset state.

The correct way to handle active low GPIO lines is to provide the
GPIO_ACTIVE_LOW in the device tree (thus properly describing the hardware)
and letting the GPIO framework invert the assertion (driving high) to a
low level and vice versa.

This is considered a bug since the device trees are incorrectly
mis-specifying the line as active high.

Fix the driver and all device trees specifying a reset line.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NPhilippe Schenker <philippe.schenker@toradex.com>
Acked-by: NKrzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201104153032.1387747-1-linus.walleij@linaro.orgSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.137
commit 11903c5457fddf719217711e720aad4386905bc3
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=11903c5457fddf719217711e720aad4386905bc3

--------------------------------

[ Upstream commit ba28db60 ]

Each cpu-core is supposed to list its supply separately, add supply for
cpu1.

Fixes: 2d7401f8 ("ARM: dts: imx7d: Add cpu1 supply")
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>