Removed unnecessary 'and' masking: The right shift discards the lower
bits so there is no need to clear them.

(A later patch needs this change to support a 32-bit chunk_mask.)
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Reviewed-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Minor code touch-up.  We don't need the 'else'.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Reviewed-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

strlcpy() will always null terminate the string.

    The code should already guarantee this as the last bytes are already
    NULs and the string lengths were restricted before being stored in
    hc.  Removing the '-1' becomes necessary so strlcpy() doesn't
    lose the last character of a maximum-length string.
	- agk
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Explicitly initialize bio lists instead of relying on kzalloc.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NTakahiro Yasui <tyasui@redhat.com>
Tested-by: NTakahiro Yasui <tyasui@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Hold all write bios when leg fails and errors are handled

When using a userspace daemon such as dmeventd to handle errors, we must
delay completing  bios until it has done its job.
This patch prevents the following race:
  - primary leg fails
  - write "1" fail, the write is held, secondary leg is set default
  - write "2" goes straight to the secondary leg
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NTakahiro Yasui <tyasui@redhat.com>
Tested-by: NTakahiro Yasui <tyasui@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Hold all write bios when errors are handled.

Previously the failures list was used only when handling errors with
a userspace daemon such as dmeventd.  Now, it is always used for all bios.
The regions where some writes failed must be marked as nosync. This can only
be done in process context (i.e. in raid1 workqueue), not in the
write_callback function.

Previously the write would succeed if writing to at least one leg
succeeded.  This is wrong because data from the failed leg may be
replicated to the correct leg.  Now, if using a userspace daemon, the
write with some failures will be held until the daemon has done its job
and reconfigured the array.  If not using a daemon, the write still
succeeds if at least one leg succeeds. This is bad, but it is consistent
with current behavior.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NTakahiro Yasui <tyasui@redhat.com>
Tested-by: NTakahiro Yasui <tyasui@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Move bio completion out of dm_rh_mark_nosync in preparation for the
next patch.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NTakahiro Yasui <tyasui@redhat.com>
Tested-by: NTakahiro Yasui <tyasui@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Move the logic to get a valid mirror leg into a function for re-use
in a later patch.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NTakahiro Yasui <tyasui@redhat.com>
Tested-by: NTakahiro Yasui <tyasui@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Use the hold framework in do_failures.

This patch doesn't change the bio processing logic, it just simplifies
failure handling and avoids periodically polling the failures list.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NTakahiro Yasui <tyasui@redhat.com>
Tested-by: NTakahiro Yasui <tyasui@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Add framework to delay bios until a suspend and then resubmit them with
either DM_ENDIO_REQUEUE (if the suspend was noflush) or complete them
with -EIO.  I/O barrier support will use this.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NTakahiro Yasui <tyasui@redhat.com>
Tested-by: NTakahiro Yasui <tyasui@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Report flush errors as 'F' instead of 'D' for log and mirror devices.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Implement flush callee. It uses dm_io to send zero-size barrier synchronously
and concurrently to all the mirror legs.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Call the flush callback from the log.

If flush failed, we have no alternative but to mark the whole log as dirty.
Also we set the variable flush_failed to prevent any bits ever being marked as
clean again.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Introduce a callback pointer from the log to dm-raid1 layer.

Before some region is set as "in-sync", we need to flush hardware cache on
all the disks. But the log module doesn't have access to the mirror_set
structure. So it will use this callback.

So far the callback is unused, it will be used in further patches.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Introduce "flush failed" variable.  When a flush before clearing a bit
in the log fails, we don't know anything about which which regions are
in-sync and which not.

So we need to set all regions as not-in-sync and set the variable
"flush_failed" to prevent setting the in-sync bit in the future.

A target reload is the only way to get out of this situation.

The variable will be set in following patches.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Introduce flush_header and use it to flush the log device.

Note that we don't have to flush if all the regions transition
from "dirty" to "clean" state.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Split the variable "touched" into two, "touched_dirtied" and
"touched_cleaned", set when some region was dirtied or cleaned.

This will be used to optimize flushes.

After a transition from "dirty" to "clean" state we don't have flush hardware
cache on the log device. After a transition from "clean" to "dirty" the cache
must be flushed.

Before a transition from "clean" to "dirty" state we don't have to flush all
the raid legs. Before a transition from "dirty" to "clean" we must flush all
the legs to make sure that they are really in sync.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Flush support for dm-raid1.

When it receives an empty barrier, submit it to all the devices via dm-io.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Remove the hack where we allocate an extra bi_io_vec to store additional
private data.  This hack prevents us from supporting barriers in
dm-raid1 without first making another little block layer change.
Instead of doing that, this patch eliminates the bi_io_vec abuse by
storing the region number directly in the low bits of bi_private.

We need to store two things for each bio, the pointer to the main io
structure and, if parallel writes were requested, an index indicating
which of these writes this bio belongs to.  There can be at most
BITS_PER_LONG regions - 32 or 64.

The index (region number) was stored in the last (hidden) bio vector and
the pointer to struct io was stored in bi_private.

This patch now aligns "struct io" on BITS_PER_LONG bytes and stores the
region number in the low BITS_PER_LONG bits of bi_private.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Allocate "struct io" from a slab.

This patch changes dm-io, so that "struct io" is allocated from a slab cache.
It used to be allocated with kmalloc. Allocating from a slab will be needed
for the next patch, because it requires a special alignment of "struct io"
and kmalloc cannot meet this alignment.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

The "wipe key" message is used to wipe the volume key from memory
temporarily, for example when suspending to RAM.

But the initialisation vector in ESSIV mode is calculated from the
hashed volume key, so the wipe message should wipe this IV key too and
reinitialise it when the volume key is reinstated.

This patch adds an IV wipe method called from a wipe message callback.
ESSIV is then reinitialised using the init function added by the
last patch.

Cc: stable@kernel.org
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch separates the construction of IV from its initialisation.
(For ESSIV it is a hash calculation based on volume key.)

Constructor code now preallocates hash tfm and salt array
and saves it in a private IV structure.

The next patch requires this to reinitialise the wiped IV
without reallocating memory when resuming a suspended device.

Cc: stable@kernel.org
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Use kzfree for salt deallocation because it is derived from the volume
key.  Use a common error path in ESSIV constructor.

Required by a later patch which fixes the way key material is wiped
from memory.

Cc: stable@kernel.org
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Define private structures for IV so it's easy to add further attributes
in a following patch which fixes the way key material is wiped from
memory.  Also move ESSIV destructor and remove unnecessary 'status'
operation.

There are no functional changes in this patch.

Cc: stable@kernel.org
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

The "wipe key" message is used to wipe a volume key from memory
temporarily, for example when suspending to RAM.

There are two instances of the key in memory (inside crypto tfm)
but only one got wiped.  This patch wipes them both.

Cc: stable@kernel.org
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Under some special conditions the snapshot hash_size is calculated as zero.
This patch instead sets a minimum value of 64, the same as for the
pending exception table.

rounddown_pow_of_two(0) is an undefined operation (it expands to shift
by -1).  init_exception_table with an argument of 0 would fail with -ENOMEM.

The way to trigger the problem is to create a snapshot with a chunk size
that is larger than the origin device.

Cc: stable@kernel.org
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Take snapshot lock only for STATUSTYPE_INFO, not STATUSTYPE_TABLE.

Commit 4c6fff44
(dm-snapshot-lock-snapshot-while-supplying-status.patch)
introduced this use of the lock, but userspace applications using
libdevmapper have been found to request STATUSTYPE_TABLE while the device
is suspended and the lock is already held, leading to deadlock.  Since
the lock is not necessary in this case, don't try to take it.

Cc: stable@kernel.org
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch just removes an unnecessary warning:
 kobject: 'dm': does not have a release() function,
 it is broken and must be fixed.

The kobject is embedded in mapped device struct, so
code does not need to release memory explicitly here.

Cc: stable@kernel.org
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Error handling code following a kmalloc should free the allocated data.

Cc: stable@kernel.org
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Fix a reported deadlock if there are still unprocessed multipath events
on a device that is being removed.

_hash_lock is held during dev_remove while trying to send the
outstanding events.  Sending the events requests the _hash_lock
again in dm_copy_name_and_uuid.

This patch introduces a separate lock around regions that modify the
link to the hash table (dm_set_mdptr) or the name or uuid so that
dm_copy_name_and_uuid no longer needs _hash_lock.

Additionally, dm_copy_name_and_uuid can only be called if md exists
so we can drop the dm_get() and dm_put() which can lead to a BUG()
while md is being freed.

The deadlock:
 #0 [ffff8106298dfb48] schedule at ffffffff80063035
 #1 [ffff8106298dfc20] __down_read at ffffffff8006475d
 #2 [ffff8106298dfc60] dm_copy_name_and_uuid at ffffffff8824f740
 #3 [ffff8106298dfc90] dm_send_uevents at ffffffff88252685
 #4 [ffff8106298dfcd0] event_callback at ffffffff8824c678
 #5 [ffff8106298dfd00] dm_table_event at ffffffff8824dd01
 #6 [ffff8106298dfd10] __hash_remove at ffffffff882507ad
 #7 [ffff8106298dfd30] dev_remove at ffffffff88250865
 #8 [ffff8106298dfd60] ctl_ioctl at ffffffff88250d80
 #9 [ffff8106298dfee0] do_ioctl at ffffffff800418c4
#10 [ffff8106298dff00] vfs_ioctl at ffffffff8002fab9
#11 [ffff8106298dff40] sys_ioctl at ffffffff8004bdaf
#12 [ffff8106298dff80] tracesys at ffffffff8005d28d (via system_call)

Cc: stable@kernel.org
Reported-by: Nguy keren <choo@actcom.co.il>
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPICA: Update version to 20091112.
  ACPICA: Add additional module-level code support
  ACPICA: Deploy new create integer interface where appropriate
  ACPICA: New internal utility function to create Integer objects
  ACPICA: Add repair for predefined methods that must return sorted lists
  ACPICA: Fix possible fault if return Package objects contain NULL elements
  ACPICA: Add post-order callback to acpi_walk_namespace
  ACPICA: Change package length error message to an info message
  ACPICA: Reduce severity of predefined repair messages, Warning to Info
  ACPICA: Update version to 20091013
  ACPICA: Fix possible memory leak for Scope ASL operator
  ACPICA: Remove possibility of executing _REG methods twice
  ACPICA: Add repair for bad _MAT buffers
  ACPICA: Add repair for bad _BIF/_BIX packages

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (41 commits)
  hwmon: (adt7475) Add VID support for the ADT7476
  hwmon: (adt7475) Add an entry in MAINTAINERS
  hwmon: (adt7475) Add support for the ADT7476
  hwmon: (adt7475) Voltage attenuators can be bypassed
  hwmon: (adt7475) Print device information on probe
  hwmon: (adt7475) Handle alternative pin functions
  hwmon: (adt7475) Move sysfs files removal to a separate function
  hwmon: (adt7475) Add support for the ADT7490
  hwmon: (adt7475) Improve device detection
  hwmon: (adt7475) Add missing static marker
  hwmon: (adt7475) Rework voltage inputs handling
  hwmon: (adt7475) Implement pwm_use_point2_pwm_at_crit
  hwmon: (adt7475) New documentation
  hwmon: (adt7475) Add support for the ADT7473
  hwmon: (f71882fg) Add support for the f71889fg (version 2)
  hwmon: (f71882fg) Fix sysfs file removal
  hwmon: (f71882fg) Cleanup sysfs attr creation 2/2
  hwmon: (f71882fg) Cleanup sysfs attr creation 1/2
  hwmon: (thmc50) Stop using I2C_CLIENT_MODULE_PARM
  hwmon: Add Freescale MC13783 ADC driver
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: ice1724 - aureon - modify WM8770 Master & DAC volume
  ALSA: hda/realtek: quirk for D945GCLF2 mainboard
  ALSA: hda - Terradici HDA controllers does not support 64-bit mode
  ALSA: document: Add direct git link to grub hda-analyzer
  ALSA: radio/sound/miro: fix build, cleanup depends/selects
  ALSA: hda - Generalize EAPD inversion check in patch_analog.c
  ASoC: Wrong variable returned on error
  ALSA: snd-usb-us122l: add product IDs of US-122MKII and US-144MKII
  ALSA: hda - Exclude unusable ADCs for ALC88x
  ALSA: hda - Add missing Line-Out and PCM switches as slave
  ALSA: hda - iMac 9,1 sound patch.
  ALSA: opti93x: set MC indirect registers base from PnP data

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits)
  Input: appletouch - give up maintainership
  Input: dm355evm_kbd - switch to using sparse keymap library
  Input: wistron_btns - switch to using sparse keymap library
  Input: add generic support for sparse keymaps
  Input: fix memory leak in force feedback core
  Input: wistron - remove identification strings from DMI table
  Input: psmouse - remove identification strings from DMI tables
  Input: atkbd - remove identification strings from DMI table
  Input: i8042 - remove identification strings from DMI tables
  DMI: allow omitting ident strings in DMI tables
  Input: psmouse - do not carry DMI data around
  Input: matrix-keypad - switch to using dev_pm_ops
  Input: keyboard - fix lack of locking when traversing handler->h_list
  Input: gpio_keys - scan gpio state at probe and resume time
  Input: keyboard - add locking around event handling
  Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller
  Input: xpad - add two new Xbox 360 devices
  Input: polled device - do not start polling if interval is zero
  Input: polled device - schedule first poll immediately
  Input: add S3C24XX touchscreen driver
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (345 commits)
  V4L/DVB (13542): ir-keytable: Allow dynamic table change
  V4L/DVB (13541): atbm8830: replace 64-bit division and floating point usage
  V4L/DVB (13540): ir-common: Cleanup get key evdev code
  V4L/DVB (13539): ir-common: add __func__ for debug messages
  V4L/DVB (13538): ir-common: Use a dynamic keycode table
  V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocation
  V4L/DVB (13536): em28xx: Use the full RC5 code on HVR-950 Remote Controller
  V4L/DVB (13535): ir-common: Add a hauppauge new table with the complete RC5 code
  V4L/DVB (13534): ir-common: Remove some unused fields/structs
  V4L/DVB (13533): ir: use dynamic tables, instead of static ones
  V4L/DVB (13532): ir-common: Add infrastructure to use a dynamic keycode table
  V4L/DVB (13531): ir-common: rename the debug routine to allow exporting it
  V4L/DVB (13458): go7007: subdev conversion
  V4L/DVB (13457): s2250: subdev conversion
  V4L/DVB (13456): s2250: Change module structure
  V4L/DVB (13528): em28xx: add support for em2800 VC211A card
  em28xx: don't reduce scale to half size for em2800
  em28xx: don't load audio modules when AC97 is mis-detected
  em28xx: em2800 chips support max width of 640
  V4L/DVB (13523): dvb-bt8xx: fix compile warning
  ...

Fix up trivial conflicts due to spelling fixes from the trivial tree in
	Documentation/video4linux/gspca.txt
	drivers/media/video/cx18/cx18-mailbox.h

* 'next-i2c' of git://git.fluff.org/bjdooks/linux: (25 commits)
  i2c-pnx: Map I2C adapter number to platform ID number
  i2c-omap: OMAP3: PM: (re)init for every transfer to support off-mode
  i2c-designware: i2c_dw_handle_tx_abort: Use dev_dbg() for NOACK cases
  i2c-designware: Cosmetic cleanups
  i2c-designware: Tx abort cleanups
  i2c-designware: Skip RX_FULL and TX_EMPTY bits on tx abort errors
  i2c-designware: i2c_dw_xfer_msg: Fix error handling procedures
  i2c-designware: Disable TX_EMPTY when all i2c_msg msgs has been processed
  i2c-designware: Process all i2c_msg messages in the interrupt handler
  i2c-designware: i2c_dw_read: Remove redundant target address checker
  i2c-designware: i2c_dw_func: Set I2C_FUNC_SMBUS_foo bits
  i2c-designware: Initialize byte count variables just prior to being used
  i2c-designware: i2c_dw_xfer_msg: Introduce a local "buf" pointer
  i2c-designware: Divide i2c_dw_xfer_msg into two functions
  i2c-designware: Enable RX_FULL interrupt
  i2c-designware: Set Tx/Rx FIFO threshold levels
  i2c-designware: Process i2c_msg messages in the interrupt handler
  i2c-designware: i2c_dw_xfer_msg: Fix i2c_msg search bug
  i2c-designware: Improved _HCNT/_LCNT calculation
  i2c-designware: Remove an useless local variable "num"
  ...

* 's3c24xx-updates' of git://git.fluff.org/bjdooks/linux:
  ARM: S3C24XX: DMA: Use valid index when accessing array
  ARM: S3C: move s3c_pwm_remove to .devexit.text
  ARM: S3C24XX: Export s3c24xx_set_fiq for modules.
  ARM: S3C: move s3c_adc_remove to .devexit.text

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6:
  sl82c105: remove no longer needed debugging code
  sis5513: remove stale TODO
  pdc202xx_old: remove no longer needed debugging code
  cy82c693: remove no longer needed debugging code
  cmd64x: remove no longer needed debugging code
  alim15x3: remove obsolete and dangerous wdc_udma parameter
  ide: Increase WAIT_DRQ to accomodate some CF cards and SSD drives.
  cs5535: add pci id for AMD based CS5535 controllers
  slc90e66: fix UDMA handling
  drivers/ide/tx4938ide.c: use resource_size()
  drivers/ide/ide_platform.c: use resource_size()
  drivers/ide/au1xxx-ide.c: use resource_size()
  hpt366: remove dead old timing tables
  ide: update Kconfig text to mark as deprecated
  ide-tape: remove the BKL
  hpt366: kill unused #define's

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: add multi-input quirk for NextWindow Touchscreen.
  HID: add support for Acan FG-8100 barcode reader
  HID: make Media key on Logitech DiNovo Mini work
  HID: support Logitech/3DConnexion SpaceTraveler and SpaceNavigator
  HID: remove BKL from hiddev_ioctl_usage()
  HID: fixup quirk for NCR devices
  HID: pidff - fix unnecessary loop iterations on reset
  HID: add NOGET quirk for another device from CH Products
  HID: remove useless DRIVER_VERSION macro
  HID: fix MODULE_AUTHOR usage in HID modules
  HID: blacklist Acer Ferrari 4005 optical mouse