- 02 6月, 2017 1 次提交
-
-
由 Chris Wilson 提交于
In commit 5763ff04 ("drm/i915: Avoid GPU stalls from kswapd") we stopped direct reclaim and kswapd from triggering GPU/client stalls whilst running (by restricting the objects they could reap to be idle). However with abusive GPU usage, it becomes quite easy to starve kswapd of memory and prevent it from making forward progress towards obtaining enough free memory (thus driving the system closer to swap exhaustion). Relax the previous restriction to allow kswapd (but not direct reclaim) to stall the device whilst reaping purgeable pages. v2: Also acquire the rpm wakelock to allow kswapd to unbind buffers. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170601133331.5973-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
-
- 26 5月, 2017 1 次提交
-
-
由 Chris Wilson 提交于
As only GGTT vma may be permanently pinned and are always at the head of the object's vma list, as soon as we seen a ppGTT vma we can stop searching for any_vma_pinned(). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170525072528.11185-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
- 11 5月, 2017 1 次提交
-
-
由 Joonas Lahtinen 提交于
Due to the complex dependencies between workqueues and RCU, which are not easily detected by lockdep, do not synchronize RCU during shrinking. On low-on-memory systems (mem=1G for example), the RCU sync leads to all system workqueus freezing and unrelated lockdep splats are displayed according to reports. GIT bisecting done by J. R. Okajima points to the commit where RCU syncing was extended. RCU sync gains us very little benefit in real life scenarios where the amount of memory used by object backing storage is dominant over the metadata under RCU, so drop it altogether. " Yeeeaah, if core could just, go ahead and reclaim RCU queues, that'd be great. " - Chris Wilson, 2016 (0eafec6d) v2: More information to commit message. v3: Remove "grep _rcu_" escapee from i915_gem_shrink_all (Andrea) Fixes: c053b5a5 ("drm/i915: Don't call synchronize_rcu_expedited under struct_mutex") Suggested-by: NChris Wilson <chris@chris-wilson.co.uk> Reported-by: NJ. R. Okajima <hooanon05g@gmail.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Tested-by: NHugh Dickins <hughd@google.com> Tested-by: NAndrea Arcangeli <aarcange@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: J. R. Okajima <hooanon05g@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: <stable@vger.kernel.org> # v4.11+ Link: http://patchwork.freedesktop.org/patch/msgid/1494414040-11160-1-git-send-email-joonas.lahtinen@linux.intel.com
-
- 11 4月, 2017 1 次提交
-
-
由 Joonas Lahtinen 提交于
Only call synchronize_rcu_expedited after unlocking struct_mutex to avoid deadlock because the workqueues depend on struct_mutex. >From original patch by Andrea: synchronize_rcu/synchronize_sched/synchronize_rcu_expedited() will hang until its own workqueues are run. The i915 gem workqueues will wait on the struct_mutex to be released. So we cannot wait for a quiescent state using those rcu primitives while holding the struct_mutex or it creates a circular lock dependency resulting in kernel hangs (which is reproducible but goes undetected by lockdep). kswapd0 D 0 700 2 0x00000000 Call Trace: ? __schedule+0x1a5/0x660 ? schedule+0x36/0x80 ? _synchronize_rcu_expedited.constprop.65+0x2ef/0x300 ? wake_up_bit+0x20/0x20 ? rcu_stall_kick_kthreads.part.54+0xc0/0xc0 ? rcu_exp_wait_wake+0x530/0x530 ? i915_gem_shrink+0x34b/0x4b0 ? i915_gem_shrinker_scan+0x7c/0x90 ? i915_gem_shrinker_scan+0x7c/0x90 ? shrink_slab.part.61.constprop.72+0x1c1/0x3a0 ? shrink_zone+0x154/0x160 ? kswapd+0x40a/0x720 ? kthread+0xf4/0x130 ? try_to_free_pages+0x450/0x450 ? kthread_create_on_node+0x40/0x40 ? ret_from_fork+0x23/0x30 plasmashell D 0 4657 4614 0x00000000 Call Trace: ? __schedule+0x1a5/0x660 ? schedule+0x36/0x80 ? schedule_preempt_disabled+0xe/0x10 ? __mutex_lock.isra.4+0x1c9/0x790 ? i915_gem_close_object+0x26/0xc0 ? i915_gem_close_object+0x26/0xc0 ? drm_gem_object_release_handle+0x48/0x90 ? drm_gem_handle_delete+0x50/0x80 ? drm_ioctl+0x1fa/0x420 ? drm_gem_handle_create+0x40/0x40 ? pipe_write+0x391/0x410 ? __vfs_write+0xc6/0x120 ? do_vfs_ioctl+0x8b/0x5d0 ? SyS_ioctl+0x3b/0x70 ? entry_SYSCALL_64_fastpath+0x13/0x94 kworker/0:0 D 0 29186 2 0x00000000 Workqueue: events __i915_gem_free_work Call Trace: ? __schedule+0x1a5/0x660 ? schedule+0x36/0x80 ? schedule_preempt_disabled+0xe/0x10 ? __mutex_lock.isra.4+0x1c9/0x790 ? del_timer_sync+0x44/0x50 ? update_curr+0x57/0x110 ? __i915_gem_free_objects+0x31/0x300 ? __i915_gem_free_objects+0x31/0x300 ? __i915_gem_free_work+0x2d/0x40 ? process_one_work+0x13a/0x3b0 ? worker_thread+0x4a/0x460 ? kthread+0xf4/0x130 ? process_one_work+0x3b0/0x3b0 ? kthread_create_on_node+0x40/0x40 ? ret_from_fork+0x23/0x30 Fixes: 3d3d18f0 ("drm/i915: Avoid rcu_barrier() from reclaim paths (shrinker)") Reported-by: NAndrea Arcangeli <aarcange@redhat.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 8f612d05) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
- 07 4月, 2017 2 次提交
-
-
由 Joonas Lahtinen 提交于
By using the same structure for both interruptible and uninterruptible locking in shrinker code, combined with the information that mm.interruptible is only being written to, the code can be greatly simplified. Also removing the i915_gem_ prefix from the locking functions so that nobody in their wildest dreams considers exporting them. Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1491562175-27680-1-git-send-email-joonas.lahtinen@linux.intel.com
-
由 Joonas Lahtinen 提交于
Only call synchronize_rcu_expedited after unlocking struct_mutex to avoid deadlock because the workqueues depend on struct_mutex. >From original patch by Andrea: synchronize_rcu/synchronize_sched/synchronize_rcu_expedited() will hang until its own workqueues are run. The i915 gem workqueues will wait on the struct_mutex to be released. So we cannot wait for a quiescent state using those rcu primitives while holding the struct_mutex or it creates a circular lock dependency resulting in kernel hangs (which is reproducible but goes undetected by lockdep). kswapd0 D 0 700 2 0x00000000 Call Trace: ? __schedule+0x1a5/0x660 ? schedule+0x36/0x80 ? _synchronize_rcu_expedited.constprop.65+0x2ef/0x300 ? wake_up_bit+0x20/0x20 ? rcu_stall_kick_kthreads.part.54+0xc0/0xc0 ? rcu_exp_wait_wake+0x530/0x530 ? i915_gem_shrink+0x34b/0x4b0 ? i915_gem_shrinker_scan+0x7c/0x90 ? i915_gem_shrinker_scan+0x7c/0x90 ? shrink_slab.part.61.constprop.72+0x1c1/0x3a0 ? shrink_zone+0x154/0x160 ? kswapd+0x40a/0x720 ? kthread+0xf4/0x130 ? try_to_free_pages+0x450/0x450 ? kthread_create_on_node+0x40/0x40 ? ret_from_fork+0x23/0x30 plasmashell D 0 4657 4614 0x00000000 Call Trace: ? __schedule+0x1a5/0x660 ? schedule+0x36/0x80 ? schedule_preempt_disabled+0xe/0x10 ? __mutex_lock.isra.4+0x1c9/0x790 ? i915_gem_close_object+0x26/0xc0 ? i915_gem_close_object+0x26/0xc0 ? drm_gem_object_release_handle+0x48/0x90 ? drm_gem_handle_delete+0x50/0x80 ? drm_ioctl+0x1fa/0x420 ? drm_gem_handle_create+0x40/0x40 ? pipe_write+0x391/0x410 ? __vfs_write+0xc6/0x120 ? do_vfs_ioctl+0x8b/0x5d0 ? SyS_ioctl+0x3b/0x70 ? entry_SYSCALL_64_fastpath+0x13/0x94 kworker/0:0 D 0 29186 2 0x00000000 Workqueue: events __i915_gem_free_work Call Trace: ? __schedule+0x1a5/0x660 ? schedule+0x36/0x80 ? schedule_preempt_disabled+0xe/0x10 ? __mutex_lock.isra.4+0x1c9/0x790 ? del_timer_sync+0x44/0x50 ? update_curr+0x57/0x110 ? __i915_gem_free_objects+0x31/0x300 ? __i915_gem_free_objects+0x31/0x300 ? __i915_gem_free_work+0x2d/0x40 ? process_one_work+0x13a/0x3b0 ? worker_thread+0x4a/0x460 ? kthread+0xf4/0x130 ? process_one_work+0x3b0/0x3b0 ? kthread_create_on_node+0x40/0x40 ? ret_from_fork+0x23/0x30 Fixes: 3d3d18f0 ("drm/i915: Avoid rcu_barrier() from reclaim paths (shrinker)") Reported-by: NAndrea Arcangeli <aarcange@redhat.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
-
- 21 3月, 2017 1 次提交
-
-
由 Chris Wilson 提交于
The rcu_barrier() takes the cpu_hotplug mutex which itself is not reclaim-safe, and so rcu_barrier() is illegal from inside the shrinker. [ 309.661373] ========================================================= [ 309.661376] [ INFO: possible irq lock inversion dependency detected ] [ 309.661380] 4.11.0-rc1-CI-CI_DRM_2333+ #1 Tainted: G W [ 309.661383] --------------------------------------------------------- [ 309.661386] gem_exec_gttfil/6435 just changed the state of lock: [ 309.661389] (rcu_preempt_state.barrier_mutex){+.+.-.}, at: [<ffffffff81100731>] _rcu_barrier+0x31/0x160 [ 309.661399] but this lock took another, RECLAIM_FS-unsafe lock in the past: [ 309.661402] (cpu_hotplug.lock){+.+.+.} [ 309.661404] and interrupts could create inverse lock ordering between them. [ 309.661410] other info that might help us debug this: [ 309.661414] Possible interrupt unsafe locking scenario: [ 309.661417] CPU0 CPU1 [ 309.661419] ---- ---- [ 309.661421] lock(cpu_hotplug.lock); [ 309.661425] local_irq_disable(); [ 309.661432] lock(rcu_preempt_state.barrier_mutex); [ 309.661441] lock(cpu_hotplug.lock); [ 309.661446] <Interrupt> [ 309.661448] lock(rcu_preempt_state.barrier_mutex); [ 309.661453] *** DEADLOCK *** [ 309.661460] 4 locks held by gem_exec_gttfil/6435: [ 309.661464] #0: (sb_writers#10){.+.+.+}, at: [<ffffffff8120d83d>] vfs_write+0x17d/0x1f0 [ 309.661475] #1: (debugfs_srcu){......}, at: [<ffffffff81320491>] debugfs_use_file_start+0x41/0xa0 [ 309.661486] #2: (&attr->mutex){+.+.+.}, at: [<ffffffff8123a3e7>] simple_attr_write+0x37/0xe0 [ 309.661495] #3: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0091b4a>] i915_drop_caches_set+0x3a/0x150 [i915] [ 309.661540] the shortest dependencies between 2nd lock and 1st lock: [ 309.661547] -> (cpu_hotplug.lock){+.+.+.} ops: 829 { [ 309.661553] HARDIRQ-ON-W at: [ 309.661560] __lock_acquire+0x5e5/0x1b50 [ 309.661565] lock_acquire+0xc9/0x220 [ 309.661572] __mutex_lock+0x6e/0x990 [ 309.661576] mutex_lock_nested+0x16/0x20 [ 309.661583] get_online_cpus+0x61/0x80 [ 309.661590] kmem_cache_create+0x25/0x1d0 [ 309.661596] debug_objects_mem_init+0x30/0x249 [ 309.661602] start_kernel+0x341/0x3fe [ 309.661607] x86_64_start_reservations+0x2a/0x2c [ 309.661612] x86_64_start_kernel+0x173/0x186 [ 309.661619] verify_cpu+0x0/0xfc [ 309.661622] SOFTIRQ-ON-W at: [ 309.661627] __lock_acquire+0x611/0x1b50 [ 309.661632] lock_acquire+0xc9/0x220 [ 309.661636] __mutex_lock+0x6e/0x990 [ 309.661641] mutex_lock_nested+0x16/0x20 [ 309.661646] get_online_cpus+0x61/0x80 [ 309.661650] kmem_cache_create+0x25/0x1d0 [ 309.661655] debug_objects_mem_init+0x30/0x249 [ 309.661660] start_kernel+0x341/0x3fe [ 309.661664] x86_64_start_reservations+0x2a/0x2c [ 309.661669] x86_64_start_kernel+0x173/0x186 [ 309.661674] verify_cpu+0x0/0xfc [ 309.661677] RECLAIM_FS-ON-W at: [ 309.661682] mark_held_locks+0x6f/0xa0 [ 309.661687] lockdep_trace_alloc+0xb3/0x100 [ 309.661693] kmem_cache_alloc_trace+0x31/0x2e0 [ 309.661699] __smpboot_create_thread.part.1+0x27/0xe0 [ 309.661704] smpboot_create_threads+0x61/0x90 [ 309.661709] cpuhp_invoke_callback+0x9c/0x8a0 [ 309.661713] cpuhp_up_callbacks+0x31/0xb0 [ 309.661718] _cpu_up+0x7a/0xc0 [ 309.661723] do_cpu_up+0x5f/0x80 [ 309.661727] cpu_up+0xe/0x10 [ 309.661734] smp_init+0x71/0xb3 [ 309.661738] kernel_init_freeable+0x94/0x19e [ 309.661743] kernel_init+0x9/0xf0 [ 309.661748] ret_from_fork+0x2e/0x40 [ 309.661752] INITIAL USE at: [ 309.661757] __lock_acquire+0x234/0x1b50 [ 309.661761] lock_acquire+0xc9/0x220 [ 309.661766] __mutex_lock+0x6e/0x990 [ 309.661771] mutex_lock_nested+0x16/0x20 [ 309.661775] get_online_cpus+0x61/0x80 [ 309.661780] __cpuhp_setup_state+0x44/0x170 [ 309.661785] page_alloc_init+0x23/0x3a [ 309.661790] start_kernel+0x124/0x3fe [ 309.661794] x86_64_start_reservations+0x2a/0x2c [ 309.661799] x86_64_start_kernel+0x173/0x186 [ 309.661804] verify_cpu+0x0/0xfc [ 309.661807] } [ 309.661813] ... key at: [<ffffffff81e37690>] cpu_hotplug+0xb0/0x100 [ 309.661817] ... acquired at: [ 309.661821] lock_acquire+0xc9/0x220 [ 309.661825] __mutex_lock+0x6e/0x990 [ 309.661829] mutex_lock_nested+0x16/0x20 [ 309.661833] get_online_cpus+0x61/0x80 [ 309.661837] _rcu_barrier+0x9f/0x160 [ 309.661841] rcu_barrier+0x10/0x20 [ 309.661847] netdev_run_todo+0x5f/0x310 [ 309.661852] rtnl_unlock+0x9/0x10 [ 309.661856] default_device_exit_batch+0x133/0x150 [ 309.661862] ops_exit_list.isra.0+0x4d/0x60 [ 309.661866] cleanup_net+0x1d8/0x2c0 [ 309.661872] process_one_work+0x1f4/0x6d0 [ 309.661876] worker_thread+0x49/0x4a0 [ 309.661881] kthread+0x107/0x140 [ 309.661884] ret_from_fork+0x2e/0x40 [ 309.661890] -> (rcu_preempt_state.barrier_mutex){+.+.-.} ops: 179 { [ 309.661896] HARDIRQ-ON-W at: [ 309.661901] __lock_acquire+0x5e5/0x1b50 [ 309.661905] lock_acquire+0xc9/0x220 [ 309.661910] __mutex_lock+0x6e/0x990 [ 309.661914] mutex_lock_nested+0x16/0x20 [ 309.661919] _rcu_barrier+0x31/0x160 [ 309.661923] rcu_barrier+0x10/0x20 [ 309.661928] netdev_run_todo+0x5f/0x310 [ 309.661932] rtnl_unlock+0x9/0x10 [ 309.661936] default_device_exit_batch+0x133/0x150 [ 309.661941] ops_exit_list.isra.0+0x4d/0x60 [ 309.661946] cleanup_net+0x1d8/0x2c0 [ 309.661951] process_one_work+0x1f4/0x6d0 [ 309.661955] worker_thread+0x49/0x4a0 [ 309.661960] kthread+0x107/0x140 [ 309.661964] ret_from_fork+0x2e/0x40 [ 309.661968] SOFTIRQ-ON-W at: [ 309.661972] __lock_acquire+0x611/0x1b50 [ 309.661977] lock_acquire+0xc9/0x220 [ 309.661981] __mutex_lock+0x6e/0x990 [ 309.661986] mutex_lock_nested+0x16/0x20 [ 309.661990] _rcu_barrier+0x31/0x160 [ 309.661995] rcu_barrier+0x10/0x20 [ 309.661999] netdev_run_todo+0x5f/0x310 [ 309.662003] rtnl_unlock+0x9/0x10 [ 309.662008] default_device_exit_batch+0x133/0x150 [ 309.662013] ops_exit_list.isra.0+0x4d/0x60 [ 309.662017] cleanup_net+0x1d8/0x2c0 [ 309.662022] process_one_work+0x1f4/0x6d0 [ 309.662027] worker_thread+0x49/0x4a0 [ 309.662031] kthread+0x107/0x140 [ 309.662035] ret_from_fork+0x2e/0x40 [ 309.662039] IN-RECLAIM_FS-W at: [ 309.662043] __lock_acquire+0x638/0x1b50 [ 309.662048] lock_acquire+0xc9/0x220 [ 309.662053] __mutex_lock+0x6e/0x990 [ 309.662058] mutex_lock_nested+0x16/0x20 [ 309.662062] _rcu_barrier+0x31/0x160 [ 309.662067] rcu_barrier+0x10/0x20 [ 309.662089] i915_gem_shrink_all+0x33/0x40 [i915] [ 309.662109] i915_drop_caches_set+0x141/0x150 [i915] [ 309.662114] simple_attr_write+0xc7/0xe0 [ 309.662119] full_proxy_write+0x4f/0x70 [ 309.662124] __vfs_write+0x23/0x120 [ 309.662128] vfs_write+0xc6/0x1f0 [ 309.662133] SyS_write+0x44/0xb0 [ 309.662138] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 309.662142] INITIAL USE at: [ 309.662147] __lock_acquire+0x234/0x1b50 [ 309.662151] lock_acquire+0xc9/0x220 [ 309.662156] __mutex_lock+0x6e/0x990 [ 309.662160] mutex_lock_nested+0x16/0x20 [ 309.662165] _rcu_barrier+0x31/0x160 [ 309.662169] rcu_barrier+0x10/0x20 [ 309.662174] netdev_run_todo+0x5f/0x310 [ 309.662178] rtnl_unlock+0x9/0x10 [ 309.662183] default_device_exit_batch+0x133/0x150 [ 309.662188] ops_exit_list.isra.0+0x4d/0x60 [ 309.662192] cleanup_net+0x1d8/0x2c0 [ 309.662197] process_one_work+0x1f4/0x6d0 [ 309.662202] worker_thread+0x49/0x4a0 [ 309.662206] kthread+0x107/0x140 [ 309.662210] ret_from_fork+0x2e/0x40 [ 309.662214] } [ 309.662220] ... key at: [<ffffffff81e4e1c8>] rcu_preempt_state+0x508/0x780 [ 309.662225] ... acquired at: [ 309.662229] check_usage_forwards+0x12b/0x130 [ 309.662233] mark_lock+0x360/0x6f0 [ 309.662237] __lock_acquire+0x638/0x1b50 [ 309.662241] lock_acquire+0xc9/0x220 [ 309.662245] __mutex_lock+0x6e/0x990 [ 309.662249] mutex_lock_nested+0x16/0x20 [ 309.662253] _rcu_barrier+0x31/0x160 [ 309.662257] rcu_barrier+0x10/0x20 [ 309.662279] i915_gem_shrink_all+0x33/0x40 [i915] [ 309.662298] i915_drop_caches_set+0x141/0x150 [i915] [ 309.662303] simple_attr_write+0xc7/0xe0 [ 309.662307] full_proxy_write+0x4f/0x70 [ 309.662311] __vfs_write+0x23/0x120 [ 309.662315] vfs_write+0xc6/0x1f0 [ 309.662319] SyS_write+0x44/0xb0 [ 309.662323] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 309.662329] stack backtrace: [ 309.662335] CPU: 1 PID: 6435 Comm: gem_exec_gttfil Tainted: G W 4.11.0-rc1-CI-CI_DRM_2333+ #1 [ 309.662342] Hardware name: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011 [ 309.662348] Call Trace: [ 309.662354] dump_stack+0x67/0x92 [ 309.662359] print_irq_inversion_bug.part.19+0x1a4/0x1b0 [ 309.662365] check_usage_forwards+0x12b/0x130 [ 309.662369] mark_lock+0x360/0x6f0 [ 309.662374] ? print_shortest_lock_dependencies+0x1a0/0x1a0 [ 309.662379] __lock_acquire+0x638/0x1b50 [ 309.662383] ? __mutex_unlock_slowpath+0x3e/0x2e0 [ 309.662388] ? trace_hardirqs_on+0xd/0x10 [ 309.662392] ? _rcu_barrier+0x31/0x160 [ 309.662396] lock_acquire+0xc9/0x220 [ 309.662400] ? _rcu_barrier+0x31/0x160 [ 309.662404] ? _rcu_barrier+0x31/0x160 [ 309.662409] __mutex_lock+0x6e/0x990 [ 309.662412] ? _rcu_barrier+0x31/0x160 [ 309.662416] ? _rcu_barrier+0x31/0x160 [ 309.662421] ? synchronize_rcu_expedited+0x35/0xb0 [ 309.662426] ? _raw_spin_unlock_irqrestore+0x52/0x60 [ 309.662434] mutex_lock_nested+0x16/0x20 [ 309.662438] _rcu_barrier+0x31/0x160 [ 309.662442] rcu_barrier+0x10/0x20 [ 309.662464] i915_gem_shrink_all+0x33/0x40 [i915] [ 309.662484] i915_drop_caches_set+0x141/0x150 [i915] [ 309.662489] simple_attr_write+0xc7/0xe0 [ 309.662494] full_proxy_write+0x4f/0x70 [ 309.662498] __vfs_write+0x23/0x120 [ 309.662503] ? rcu_read_lock_sched_held+0x75/0x80 [ 309.662507] ? rcu_sync_lockdep_assert+0x2a/0x50 [ 309.662512] ? __sb_start_write+0x102/0x210 [ 309.662516] ? vfs_write+0x17d/0x1f0 [ 309.662520] vfs_write+0xc6/0x1f0 [ 309.662524] ? trace_hardirqs_on_caller+0xe7/0x200 [ 309.662529] SyS_write+0x44/0xb0 [ 309.662533] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 309.662537] RIP: 0033:0x7f507eac24a0 [ 309.662541] RSP: 002b:00007fffda8720e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 309.662548] RAX: ffffffffffffffda RBX: ffffffff81482bd3 RCX: 00007f507eac24a0 [ 309.662552] RDX: 0000000000000005 RSI: 00007fffda8720f0 RDI: 0000000000000005 [ 309.662557] RBP: ffffc9000048bf88 R08: 0000000000000000 R09: 000000000000002c [ 309.662561] R10: 0000000000000014 R11: 0000000000000246 R12: 00007fffda872230 [ 309.662566] R13: 00007fffda872228 R14: 0000000000000201 R15: 00007fffda8720f0 [ 309.662572] ? __this_cpu_preempt_check+0x13/0x20 Fixes: 0eafec6d ("drm/i915: Enable lockless lookup of request tracking via RCU") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100192Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.9+ Link: http://patchwork.freedesktop.org/patch/msgid/20170314115019.18127-1-chris@chris-wilson.co.ukReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit bd784b7c) Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170321144531.12344-1-chris@chris-wilson.co.uk
-
- 14 3月, 2017 1 次提交
-
-
由 Chris Wilson 提交于
The rcu_barrier() takes the cpu_hotplug mutex which itself is not reclaim-safe, and so rcu_barrier() is illegal from inside the shrinker. [ 309.661373] ========================================================= [ 309.661376] [ INFO: possible irq lock inversion dependency detected ] [ 309.661380] 4.11.0-rc1-CI-CI_DRM_2333+ #1 Tainted: G W [ 309.661383] --------------------------------------------------------- [ 309.661386] gem_exec_gttfil/6435 just changed the state of lock: [ 309.661389] (rcu_preempt_state.barrier_mutex){+.+.-.}, at: [<ffffffff81100731>] _rcu_barrier+0x31/0x160 [ 309.661399] but this lock took another, RECLAIM_FS-unsafe lock in the past: [ 309.661402] (cpu_hotplug.lock){+.+.+.} [ 309.661404] and interrupts could create inverse lock ordering between them. [ 309.661410] other info that might help us debug this: [ 309.661414] Possible interrupt unsafe locking scenario: [ 309.661417] CPU0 CPU1 [ 309.661419] ---- ---- [ 309.661421] lock(cpu_hotplug.lock); [ 309.661425] local_irq_disable(); [ 309.661432] lock(rcu_preempt_state.barrier_mutex); [ 309.661441] lock(cpu_hotplug.lock); [ 309.661446] <Interrupt> [ 309.661448] lock(rcu_preempt_state.barrier_mutex); [ 309.661453] *** DEADLOCK *** [ 309.661460] 4 locks held by gem_exec_gttfil/6435: [ 309.661464] #0: (sb_writers#10){.+.+.+}, at: [<ffffffff8120d83d>] vfs_write+0x17d/0x1f0 [ 309.661475] #1: (debugfs_srcu){......}, at: [<ffffffff81320491>] debugfs_use_file_start+0x41/0xa0 [ 309.661486] #2: (&attr->mutex){+.+.+.}, at: [<ffffffff8123a3e7>] simple_attr_write+0x37/0xe0 [ 309.661495] #3: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0091b4a>] i915_drop_caches_set+0x3a/0x150 [i915] [ 309.661540] the shortest dependencies between 2nd lock and 1st lock: [ 309.661547] -> (cpu_hotplug.lock){+.+.+.} ops: 829 { [ 309.661553] HARDIRQ-ON-W at: [ 309.661560] __lock_acquire+0x5e5/0x1b50 [ 309.661565] lock_acquire+0xc9/0x220 [ 309.661572] __mutex_lock+0x6e/0x990 [ 309.661576] mutex_lock_nested+0x16/0x20 [ 309.661583] get_online_cpus+0x61/0x80 [ 309.661590] kmem_cache_create+0x25/0x1d0 [ 309.661596] debug_objects_mem_init+0x30/0x249 [ 309.661602] start_kernel+0x341/0x3fe [ 309.661607] x86_64_start_reservations+0x2a/0x2c [ 309.661612] x86_64_start_kernel+0x173/0x186 [ 309.661619] verify_cpu+0x0/0xfc [ 309.661622] SOFTIRQ-ON-W at: [ 309.661627] __lock_acquire+0x611/0x1b50 [ 309.661632] lock_acquire+0xc9/0x220 [ 309.661636] __mutex_lock+0x6e/0x990 [ 309.661641] mutex_lock_nested+0x16/0x20 [ 309.661646] get_online_cpus+0x61/0x80 [ 309.661650] kmem_cache_create+0x25/0x1d0 [ 309.661655] debug_objects_mem_init+0x30/0x249 [ 309.661660] start_kernel+0x341/0x3fe [ 309.661664] x86_64_start_reservations+0x2a/0x2c [ 309.661669] x86_64_start_kernel+0x173/0x186 [ 309.661674] verify_cpu+0x0/0xfc [ 309.661677] RECLAIM_FS-ON-W at: [ 309.661682] mark_held_locks+0x6f/0xa0 [ 309.661687] lockdep_trace_alloc+0xb3/0x100 [ 309.661693] kmem_cache_alloc_trace+0x31/0x2e0 [ 309.661699] __smpboot_create_thread.part.1+0x27/0xe0 [ 309.661704] smpboot_create_threads+0x61/0x90 [ 309.661709] cpuhp_invoke_callback+0x9c/0x8a0 [ 309.661713] cpuhp_up_callbacks+0x31/0xb0 [ 309.661718] _cpu_up+0x7a/0xc0 [ 309.661723] do_cpu_up+0x5f/0x80 [ 309.661727] cpu_up+0xe/0x10 [ 309.661734] smp_init+0x71/0xb3 [ 309.661738] kernel_init_freeable+0x94/0x19e [ 309.661743] kernel_init+0x9/0xf0 [ 309.661748] ret_from_fork+0x2e/0x40 [ 309.661752] INITIAL USE at: [ 309.661757] __lock_acquire+0x234/0x1b50 [ 309.661761] lock_acquire+0xc9/0x220 [ 309.661766] __mutex_lock+0x6e/0x990 [ 309.661771] mutex_lock_nested+0x16/0x20 [ 309.661775] get_online_cpus+0x61/0x80 [ 309.661780] __cpuhp_setup_state+0x44/0x170 [ 309.661785] page_alloc_init+0x23/0x3a [ 309.661790] start_kernel+0x124/0x3fe [ 309.661794] x86_64_start_reservations+0x2a/0x2c [ 309.661799] x86_64_start_kernel+0x173/0x186 [ 309.661804] verify_cpu+0x0/0xfc [ 309.661807] } [ 309.661813] ... key at: [<ffffffff81e37690>] cpu_hotplug+0xb0/0x100 [ 309.661817] ... acquired at: [ 309.661821] lock_acquire+0xc9/0x220 [ 309.661825] __mutex_lock+0x6e/0x990 [ 309.661829] mutex_lock_nested+0x16/0x20 [ 309.661833] get_online_cpus+0x61/0x80 [ 309.661837] _rcu_barrier+0x9f/0x160 [ 309.661841] rcu_barrier+0x10/0x20 [ 309.661847] netdev_run_todo+0x5f/0x310 [ 309.661852] rtnl_unlock+0x9/0x10 [ 309.661856] default_device_exit_batch+0x133/0x150 [ 309.661862] ops_exit_list.isra.0+0x4d/0x60 [ 309.661866] cleanup_net+0x1d8/0x2c0 [ 309.661872] process_one_work+0x1f4/0x6d0 [ 309.661876] worker_thread+0x49/0x4a0 [ 309.661881] kthread+0x107/0x140 [ 309.661884] ret_from_fork+0x2e/0x40 [ 309.661890] -> (rcu_preempt_state.barrier_mutex){+.+.-.} ops: 179 { [ 309.661896] HARDIRQ-ON-W at: [ 309.661901] __lock_acquire+0x5e5/0x1b50 [ 309.661905] lock_acquire+0xc9/0x220 [ 309.661910] __mutex_lock+0x6e/0x990 [ 309.661914] mutex_lock_nested+0x16/0x20 [ 309.661919] _rcu_barrier+0x31/0x160 [ 309.661923] rcu_barrier+0x10/0x20 [ 309.661928] netdev_run_todo+0x5f/0x310 [ 309.661932] rtnl_unlock+0x9/0x10 [ 309.661936] default_device_exit_batch+0x133/0x150 [ 309.661941] ops_exit_list.isra.0+0x4d/0x60 [ 309.661946] cleanup_net+0x1d8/0x2c0 [ 309.661951] process_one_work+0x1f4/0x6d0 [ 309.661955] worker_thread+0x49/0x4a0 [ 309.661960] kthread+0x107/0x140 [ 309.661964] ret_from_fork+0x2e/0x40 [ 309.661968] SOFTIRQ-ON-W at: [ 309.661972] __lock_acquire+0x611/0x1b50 [ 309.661977] lock_acquire+0xc9/0x220 [ 309.661981] __mutex_lock+0x6e/0x990 [ 309.661986] mutex_lock_nested+0x16/0x20 [ 309.661990] _rcu_barrier+0x31/0x160 [ 309.661995] rcu_barrier+0x10/0x20 [ 309.661999] netdev_run_todo+0x5f/0x310 [ 309.662003] rtnl_unlock+0x9/0x10 [ 309.662008] default_device_exit_batch+0x133/0x150 [ 309.662013] ops_exit_list.isra.0+0x4d/0x60 [ 309.662017] cleanup_net+0x1d8/0x2c0 [ 309.662022] process_one_work+0x1f4/0x6d0 [ 309.662027] worker_thread+0x49/0x4a0 [ 309.662031] kthread+0x107/0x140 [ 309.662035] ret_from_fork+0x2e/0x40 [ 309.662039] IN-RECLAIM_FS-W at: [ 309.662043] __lock_acquire+0x638/0x1b50 [ 309.662048] lock_acquire+0xc9/0x220 [ 309.662053] __mutex_lock+0x6e/0x990 [ 309.662058] mutex_lock_nested+0x16/0x20 [ 309.662062] _rcu_barrier+0x31/0x160 [ 309.662067] rcu_barrier+0x10/0x20 [ 309.662089] i915_gem_shrink_all+0x33/0x40 [i915] [ 309.662109] i915_drop_caches_set+0x141/0x150 [i915] [ 309.662114] simple_attr_write+0xc7/0xe0 [ 309.662119] full_proxy_write+0x4f/0x70 [ 309.662124] __vfs_write+0x23/0x120 [ 309.662128] vfs_write+0xc6/0x1f0 [ 309.662133] SyS_write+0x44/0xb0 [ 309.662138] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 309.662142] INITIAL USE at: [ 309.662147] __lock_acquire+0x234/0x1b50 [ 309.662151] lock_acquire+0xc9/0x220 [ 309.662156] __mutex_lock+0x6e/0x990 [ 309.662160] mutex_lock_nested+0x16/0x20 [ 309.662165] _rcu_barrier+0x31/0x160 [ 309.662169] rcu_barrier+0x10/0x20 [ 309.662174] netdev_run_todo+0x5f/0x310 [ 309.662178] rtnl_unlock+0x9/0x10 [ 309.662183] default_device_exit_batch+0x133/0x150 [ 309.662188] ops_exit_list.isra.0+0x4d/0x60 [ 309.662192] cleanup_net+0x1d8/0x2c0 [ 309.662197] process_one_work+0x1f4/0x6d0 [ 309.662202] worker_thread+0x49/0x4a0 [ 309.662206] kthread+0x107/0x140 [ 309.662210] ret_from_fork+0x2e/0x40 [ 309.662214] } [ 309.662220] ... key at: [<ffffffff81e4e1c8>] rcu_preempt_state+0x508/0x780 [ 309.662225] ... acquired at: [ 309.662229] check_usage_forwards+0x12b/0x130 [ 309.662233] mark_lock+0x360/0x6f0 [ 309.662237] __lock_acquire+0x638/0x1b50 [ 309.662241] lock_acquire+0xc9/0x220 [ 309.662245] __mutex_lock+0x6e/0x990 [ 309.662249] mutex_lock_nested+0x16/0x20 [ 309.662253] _rcu_barrier+0x31/0x160 [ 309.662257] rcu_barrier+0x10/0x20 [ 309.662279] i915_gem_shrink_all+0x33/0x40 [i915] [ 309.662298] i915_drop_caches_set+0x141/0x150 [i915] [ 309.662303] simple_attr_write+0xc7/0xe0 [ 309.662307] full_proxy_write+0x4f/0x70 [ 309.662311] __vfs_write+0x23/0x120 [ 309.662315] vfs_write+0xc6/0x1f0 [ 309.662319] SyS_write+0x44/0xb0 [ 309.662323] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 309.662329] stack backtrace: [ 309.662335] CPU: 1 PID: 6435 Comm: gem_exec_gttfil Tainted: G W 4.11.0-rc1-CI-CI_DRM_2333+ #1 [ 309.662342] Hardware name: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011 [ 309.662348] Call Trace: [ 309.662354] dump_stack+0x67/0x92 [ 309.662359] print_irq_inversion_bug.part.19+0x1a4/0x1b0 [ 309.662365] check_usage_forwards+0x12b/0x130 [ 309.662369] mark_lock+0x360/0x6f0 [ 309.662374] ? print_shortest_lock_dependencies+0x1a0/0x1a0 [ 309.662379] __lock_acquire+0x638/0x1b50 [ 309.662383] ? __mutex_unlock_slowpath+0x3e/0x2e0 [ 309.662388] ? trace_hardirqs_on+0xd/0x10 [ 309.662392] ? _rcu_barrier+0x31/0x160 [ 309.662396] lock_acquire+0xc9/0x220 [ 309.662400] ? _rcu_barrier+0x31/0x160 [ 309.662404] ? _rcu_barrier+0x31/0x160 [ 309.662409] __mutex_lock+0x6e/0x990 [ 309.662412] ? _rcu_barrier+0x31/0x160 [ 309.662416] ? _rcu_barrier+0x31/0x160 [ 309.662421] ? synchronize_rcu_expedited+0x35/0xb0 [ 309.662426] ? _raw_spin_unlock_irqrestore+0x52/0x60 [ 309.662434] mutex_lock_nested+0x16/0x20 [ 309.662438] _rcu_barrier+0x31/0x160 [ 309.662442] rcu_barrier+0x10/0x20 [ 309.662464] i915_gem_shrink_all+0x33/0x40 [i915] [ 309.662484] i915_drop_caches_set+0x141/0x150 [i915] [ 309.662489] simple_attr_write+0xc7/0xe0 [ 309.662494] full_proxy_write+0x4f/0x70 [ 309.662498] __vfs_write+0x23/0x120 [ 309.662503] ? rcu_read_lock_sched_held+0x75/0x80 [ 309.662507] ? rcu_sync_lockdep_assert+0x2a/0x50 [ 309.662512] ? __sb_start_write+0x102/0x210 [ 309.662516] ? vfs_write+0x17d/0x1f0 [ 309.662520] vfs_write+0xc6/0x1f0 [ 309.662524] ? trace_hardirqs_on_caller+0xe7/0x200 [ 309.662529] SyS_write+0x44/0xb0 [ 309.662533] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 309.662537] RIP: 0033:0x7f507eac24a0 [ 309.662541] RSP: 002b:00007fffda8720e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 309.662548] RAX: ffffffffffffffda RBX: ffffffff81482bd3 RCX: 00007f507eac24a0 [ 309.662552] RDX: 0000000000000005 RSI: 00007fffda8720f0 RDI: 0000000000000005 [ 309.662557] RBP: ffffc9000048bf88 R08: 0000000000000000 R09: 000000000000002c [ 309.662561] R10: 0000000000000014 R11: 0000000000000246 R12: 00007fffda872230 [ 309.662566] R13: 00007fffda872228 R14: 0000000000000201 R15: 00007fffda8720f0 [ 309.662572] ? __this_cpu_preempt_check+0x13/0x20 Fixes: 0eafec6d ("drm/i915: Enable lockless lookup of request tracking via RCU") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100192Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.9+ Link: http://patchwork.freedesktop.org/patch/msgid/20170314115019.18127-1-chris@chris-wilson.co.ukReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 02 3月, 2017 1 次提交
-
-
由 Chris Wilson 提交于
Reintroduce a lock around tiling vs framebuffer creation to prevent modification of the obj->tiling_and_stride whilst the framebuffer is being created. Rather than use struct_mutex once again, use the per-object lock - this will also be required in future to prevent changing the tiling whilst submitting rendering. Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Fixes: 24dbf51a ("drm/i915: struct_mutex is not required for allocating the framebuffer") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170301154128.2841-2-chris@chris-wilson.co.uk
-
- 17 2月, 2017 1 次提交
-
-
由 Chris Wilson 提交于
We do not need to hold struct_mutex for destroying drm_i915_gem_objects any longer, and with a little care taken over tracking obj->framebuffer_references, we can relinquish BKL locking around the destroy of intel_framebuffer. v2: Use atomic check for WARN_ON framebuffer miscounting Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170216094621.3426-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
- 09 2月, 2017 1 次提交
-
-
由 Chris Wilson 提交于
Since to unbind an object, we may need a powered up device to access the GTT entries, we only shrink bound objects if awake. Callers to i915_gem_shrink_all() had to take this into account and take the rpm wakeref, but we can move this wakeref into the shrink_all itself for convenience and making the function live up to its name. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170208104710.18089-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
-
- 15 11月, 2016 1 次提交
-
-
由 Peter Zijlstra 提交于
By popular DRM demand, introduce mutex_trylock_recursive() to fix up the two GEM users. Without this it is very easy for these drivers to get stuck in low-memory situations and trigger OOM. Work is in progress to remove the need for this in at least i915. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ding Tianhong <dingtianhong@huawei.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jason Low <jason.low2@hpe.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Terry Rudd <terry.rudd@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Will Deacon <Will.Deacon@arm.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 03 11月, 2016 1 次提交
-
-
由 Ingo Molnar 提交于
Mike Krinkin reported hangs in the DRM code and bisected it to: 3ab7c086 ("locking/drm: Kill mutex trickery") Hugh Dickins observed: "i915_gem_shrinker_lock() is broken: but copy the pattern from msm_gem_shrinker_lock() and it's okay - patch below." Pick up the fix in isolation to make sure the bug is fixed, cleanup patch will follow up. Originally-From: Hugh Dickins <hughd@google.com> Reported-by: NHugh Dickins <hughd@google.com> Reported-by: NMike Krinkin <krinkin.m.u@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: chris@chris-wilson.co.uk Cc: jason.low2@hpe.com Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1610301645180.28429@eggly.anvilsSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 02 11月, 2016 2 次提交
-
-
由 Joonas Lahtinen 提交于
$ sed -i -r 's/\bglobal_list\b/global_link/g' *.c *.h Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1478081764-8058-1-git-send-email-joonas.lahtinen@linux.intel.com
-
由 Tvrtko Ursulin 提交于
Commit 1bec9b0b ("drm/i915/shrinker: Only shmemfs objects are backed by swap") stopped considering the userptr objects in shrinker callbacks. Restore that so idle userptr objects can be discarded in order to free up memory. One change further to what was introduced in 1bec9b0b is to start considering userptr objects in oom but that should also be a correct thing to do. v2: Introduce I915_GEM_OBJECT_IS_SHRINKABLE. (Chris Wilson) Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 1bec9b0b ("drm/i915/shrinker: Only shmemfs objects are backed by swap") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: <stable@vger.kernel.org> Link: http://patchwork.freedesktop.org/patch/msgid/1478011450-6634-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
- 01 11月, 2016 3 次提交
-
-
由 Chris Wilson 提交于
The shrinker may appear to recurse into obj->mm.lock as the shrinker may be called from a direct reclaim path whilst handling get_pages. We filter out recursing on the same obj->mm.lock by inspecting obj->mm.pages, but we do want to take the lock on a second object in order to reap their pages. lockdep spots the recursion on the same lockclass and needs annotation to avoid a false positive. To keep the two paths distinct, create an enum to indicate which subclass of obj->mm.lock we are using. This removes the false positive and avoids masking real bugs. Suggested-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161101121134.27504-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Chris Wilson 提交于
During shrinking, we walk over the list of objects searching for victims. Any that are not removed are put back into the global list. Currently, they are put back in order (at the front) which means they will be first to be scanned again. If we instead move them to the rear of the list, we will scan new potential victims on the next pass and waste less time rescanning unshrinkable objects. Normally the lists are kept in rough order to shrinking (with object least frequently used at the start), by moving just scanned objects to the rear we are acknowledging that they are still in use. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161101084843.3961-3-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
In the shrinker, we can safely remove an empty object (obj->mm.pages == NULL) after having discarded the pages because we are holding the struct_mutex. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161101084843.3961-2-chris@chris-wilson.co.uk
-
- 31 10月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
As we may allocate from within the obj->mm.lock we may enter the shrinker for direct reclaim. Operating on the current object is prevented by checking for obj->mm.pages (which is only set as the last operation in the allocation path). However, we need to identify the single recursion of accessing another object's obj->mm.lock as the two locks have identical class and so appear to be the same to lockdep, convincing it that a deadlock is possible. Use mutex_lock_nested() to remove the false positive. [ 2165.945734] ================================= [ 2165.945749] [ INFO: inconsistent lock state ] [ 2165.945765] 4.9.0-rc2+ #2 Tainted: G W [ 2165.945781] --------------------------------- [ 2165.945796] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. [ 2165.945816] kswapd0/62 [HC0[0]:SC0[0]:HE1:SE1] takes: (&obj->mm.lock){+.+.?.}, at: [<ffffffffc0289a1f>] i915_gem_shrink+0x29f/0x500 [i915] [ 2165.945904] {RECLAIM_FS-ON-W} state was registered at: [ 2165.945931] [<ffffffffb10bd50f>] mark_held_locks+0x6f/0xa0 [ 2165.945956] [<ffffffffb10bf889>] lockdep_trace_alloc+0x69/0xc0 [ 2165.945982] [<ffffffffb11eea53>] kmem_cache_alloc_trace+0x33/0x2a0 [ 2165.946019] [<ffffffffc028a28a>] i915_gem_object_get_pages_stolen+0x6a/0xd0 [i915] [ 2165.946060] [<ffffffffc027e1d0>] ____i915_gem_object_get_pages+0x20/0x60 [i915] [ 2165.946098] [<ffffffffc027e268>] __i915_gem_object_get_pages+0x58/0x70 [i915] [ 2165.946138] [<ffffffffc028a3dc>] _i915_gem_object_create_stolen+0xec/0x120 [i915] [ 2165.946177] [<ffffffffc028af73>] i915_gem_object_create_stolen_for_preallocated+0xf3/0x3f0 [i915] [ 2165.946222] [<ffffffffc02bae43>] intel_alloc_initial_plane_obj.isra.125+0xd3/0x200 [i915] [ 2165.946266] [<ffffffffc02cb1c1>] intel_modeset_init+0x931/0x1530 [i915] [ 2165.946301] [<ffffffffc023d584>] i915_driver_load+0xa14/0x14a0 [i915] [ 2165.946335] [<ffffffffc0248aff>] i915_pci_probe+0x4f/0x70 [i915] [ 2165.946362] [<ffffffffb13cc452>] local_pci_probe+0x42/0xa0 [ 2165.946386] [<ffffffffb13cd903>] pci_device_probe+0x103/0x150 [ 2165.946411] [<ffffffffb14adeb3>] driver_probe_device+0x223/0x430 [ 2165.946436] [<ffffffffb14ae1a3>] __driver_attach+0xe3/0xf0 [ 2165.946461] [<ffffffffb14ab943>] bus_for_each_dev+0x73/0xc0 [ 2165.946485] [<ffffffffb14ad5ee>] driver_attach+0x1e/0x20 [ 2165.946508] [<ffffffffb14ad003>] bus_add_driver+0x173/0x270 [ 2165.946533] [<ffffffffb14aee70>] driver_register+0x60/0xe0 [ 2165.946557] [<ffffffffb13cbd6d>] __pci_register_driver+0x5d/0x60 [ 2165.946606] [<ffffffffc0378057>] soundcore_open+0x17/0x230 [soundcore] [ 2165.946636] [<ffffffffb1000450>] do_one_initcall+0x50/0x180 [ 2165.946661] [<ffffffffb117fd2d>] do_init_module+0x5f/0x1f1 [ 2165.946685] [<ffffffffb1108964>] load_module+0x2174/0x2a80 [ 2165.946709] [<ffffffffb11094df>] SYSC_finit_module+0xdf/0x110 [ 2165.946734] [<ffffffffb110952e>] SyS_finit_module+0xe/0x10 [ 2165.946758] [<ffffffffb1742aea>] entry_SYSCALL_64_fastpath+0x18/0xad [ 2165.946776] irq event stamp: 90871 [ 2165.946788] hardirqs last enabled at (90871): [ 2165.946805] [<ffffffffb173e9da>] __mutex_unlock_slowpath+0x11a/0x1c0 [ 2165.946823] hardirqs last disabled at (90870): [ 2165.946839] [<ffffffffb173e91b>] __mutex_unlock_slowpath+0x5b/0x1c0 [ 2165.946856] softirqs last enabled at (90858): [ 2165.946872] [<ffffffffb174581a>] __do_softirq+0x39a/0x4c6 [ 2165.946887] softirqs last disabled at (90671): [ 2165.946902] [<ffffffffb1066cea>] irq_exit+0xea/0xf0 [ 2165.946916] other info that might help us debug this: [ 2165.946936] Possible unsafe locking scenario: [ 2165.946955] CPU0 [ 2165.946965] ---- [ 2165.946975] lock(&obj->mm.lock); [ 2165.947000] <Interrupt> [ 2165.947010] lock(&obj->mm.lock); [ 2165.947035] *** DEADLOCK *** [ 2165.947054] 2 locks held by kswapd0/62: [ 2165.947067] #0: (shrinker_rwsem){++++..}, at: [<ffffffffb119a20e>] shrink_slab.part.40+0x5e/0x5d0 [ 2165.947120] #1: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffc028954b>] i915_gem_shrinker_lock+0x1b/0x60 [i915] [ 2165.948909] stack backtrace: [ 2165.950650] CPU: 2 PID: 62 Comm: kswapd0 Tainted: G W 4.9.0-rc2+ #2 [ 2165.951587] Hardware name: LENOVO 80MX/Lenovo E31-80, BIOS DCCN34WW(V2.03) 12/01/2015 [ 2165.952484] ffffc90000b5f8c8 ffffffffb137f645 ffff88016c5a2700 ffffffffb25f20a0 [ 2165.953395] ffffc90000b5f918 ffffffffb10bcecd 0000000000000000 ffff880100000001 [ 2165.954305] 0000000000000001 000000000000000a ffff88016c5a2fd0 ffff88016c5a2700 [ 2165.955240] Call Trace: [ 2165.956170] [<ffffffffb137f645>] dump_stack+0x68/0x93 [ 2165.957071] [<ffffffffb10bcecd>] print_usage_bug+0x1dd/0x1f0 [ 2165.957979] [<ffffffffb10bd439>] mark_lock+0x559/0x5c0 [ 2165.958875] [<ffffffffb10bc3f0>] ? print_shortest_lock_dependencies+0x1b0/0x1b0 [ 2165.959829] [<ffffffffb10be04d>] __lock_acquire+0x66d/0x12a0 [ 2165.960729] [<ffffffffb11ef541>] ? __slab_free+0xa1/0x340 [ 2165.961625] [<ffffffffb10dba5d>] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 2165.962530] [<ffffffffb10bd50f>] ? mark_held_locks+0x6f/0xa0 [ 2165.963457] [<ffffffffb10bf0b0>] lock_acquire+0xf0/0x1f0 [ 2165.964368] [<ffffffffc0289a1f>] ? i915_gem_shrink+0x29f/0x500 [i915] [ 2165.965269] [<ffffffffc0289a1f>] ? i915_gem_shrink+0x29f/0x500 [i915] [ 2165.966150] [<ffffffffb173d837>] mutex_lock_nested+0x77/0x420 [ 2165.967030] [<ffffffffc0289a1f>] ? i915_gem_shrink+0x29f/0x500 [i915] [ 2165.967952] [<ffffffffc027c7a1>] ? __i915_gem_object_put_pages.part.58+0x161/0x1b0 [i915] [ 2165.968835] [<ffffffffc0289a1f>] i915_gem_shrink+0x29f/0x500 [i915] [ 2165.969712] [<ffffffffc0289e40>] i915_gem_shrinker_scan+0x70/0xb0 [i915] [ 2165.970591] [<ffffffffb119a3ae>] shrink_slab.part.40+0x1fe/0x5d0 [ 2165.971504] [<ffffffffb119f19c>] shrink_node+0x22c/0x320 [ 2165.972371] [<ffffffffb11a05fb>] kswapd+0x38b/0x9b0 [ 2165.973238] [<ffffffffb11a0270>] ? mem_cgroup_shrink_node+0x330/0x330 [ 2165.974068] [<ffffffffb108630f>] kthread+0xff/0x120 [ 2165.974929] [<ffffffffb1086210>] ? kthread_park+0x60/0x60 [ 2165.975847] [<ffffffffb1742d57>] ret_from_fork+0x27/0x40 Reported-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 1233e2db ("drm/i915: Move object backing storage manipulation...") Testcase: igt/gem_ctx_create/maximum-swap Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161031124048.30355-1-chris@chris-wilson.co.uk
-
- 29 10月, 2016 4 次提交
-
-
由 Chris Wilson 提交于
We want to hide the latency of releasing objects and their backing storage from the submission, so we move the actual free to a worker. This allows us to switch to struct_mutex freeing of the object in the next patch. Furthermore, if we know that the object we are dereferencing remains valid for the duration of our access, we can forgo the usual synchronisation barriers and atomic reference counting. To ensure this we defer freeing an object til after an RCU grace period, such that any lookup of the object within an RCU read critical section will remain valid until after we exit that critical section. We also employ this delay for rate-limiting the serialisation on reallocation - we have to slow down object creation in order to prevent resource starvation (in particular, files). v2: Return early in i915_gem_tiling() ioctl to skip over superfluous work on error. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-19-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Break the allocation of the backing storage away from struct_mutex into a per-object lock. This allows parallel page allocation, provided we can do so outside of struct_mutex (i.e. set-domain-ioctl, pwrite, GTT fault), i.e. before execbuf! The increased cost of the atomic counters are hidden behind i915_vma_pin() for the typical case of execbuf, i.e. as the object is typically bound between execbufs, the page_pin_count is static. The cost will be felt around set-domain and pwrite, but offset by the improvement from reduced struct_mutex contention. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-14-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
The plan is to move obj->pages out from under the struct_mutex into its own per-object lock. We need to prune any assumption of the struct_mutex from the get_pages/put_pages backends, and to make it easier we pass around the sg_table to operate on rather than indirectly via the obj. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-13-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
The plan is to make obtaining the backing storage for the object avoid struct_mutex (i.e. use its own locking). The first step is to update the API so that normal users only call pin/unpin whilst working on the backing storage. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-12-chris@chris-wilson.co.uk
-
- 25 10月, 2016 1 次提交
-
-
由 Peter Zijlstra 提交于
Poking at lock internals is not cool. Since I'm going to change the implementation this will break, take it out. Tested-by: NJason Low <jason.low2@hpe.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 13 10月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
Treat a framebuffer reference with the same priority as an active reference whilst shrinking. Framebuffers are likely to be reused and typically cost more to migrate to and from GPU memory (on LLC architectures we need to clflush), so defer the temptation to purge them during a kswapd run until we have run out of cheap buffers. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJohn Harrison <john.c.harrison@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161012124824.23521-1-chris@chris-wilson.co.uk
-
- 09 9月, 2016 2 次提交
-
-
由 Chris Wilson 提交于
In the next patch we want to handle reset directly by a locked waiter in order to avoid issues with returning before the reset is handled. To handle the reset, we must first know whether we hold the struct_mutex. If we do not hold the struct_mtuex we can not perform the reset, but we do not block the reset worker either (and so we can just continue to wait for request completion) - otherwise we must relinquish the mutex. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-10-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
We need finer control over wakeup behaviour during i915_wait_request(), so expand the current bool interruptible to a bitmask. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-9-chris@chris-wilson.co.uk
-
- 05 8月, 2016 6 次提交
-
-
由 Chris Wilson 提交于
After removing the user of this wart, we can remove the wart entirely. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-10-git-send-email-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
We can now wait for the GPU (all engines) to become idle without requiring the struct_mutex. Inside the shrinker, we need to currently take the struct_mutex in order to purge objects and to purge the objects we need the GPU to be idle - causing a stall whilst we hold the struct_mutex. We can hide most of that stall by performing the wait before taking the struct_mutex and only doing essential waits for new rendering on objects to be freed. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-8-git-send-email-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
The principal motivation for this was to try and eliminate the struct_mutex from i915_gem_suspend - but we still need to hold the mutex current for the i915_gem_context_lost(). (The issue there is that there may be an indirect lockdep cycle between cpu_hotplug (i.e. suspend) and struct_mutex via the stop_machine().) For the moment, enabling last request tracking for the engine, allows us to do busyness checking and waiting without requiring the struct_mutex - which is useful in its own right. As a side-effect of having a robust means for tracking engine busyness, we can replace our other busyness heuristic, that of comparing against the last submitted seqno. For paranoid reasons, we have a semi-ordered check of that seqno inside the hangchecker, which we can now improve to an ordered check of the engine's busyness (removing a locked xchg in the process). v2: Pass along "bool interruptible" as being unlocked we cannot rely on i915->mm.interruptible being stable or even under our control. v3: Replace check Ironlake i915_gpu_busy() with the common precalculated value Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-6-git-send-email-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
If we enable RCU for the requests (providing a grace period where we can inspect a "dead" request before it is freed), we can allow callers to carefully perform lockless lookup of an active request. However, by enabling deferred freeing of requests, we can potentially hog a lot of memory when dealing with tens of thousands of requests per second - with a quick insertion of a synchronize_rcu() inside our shrinker callback, that issue disappears. v2: Currently, it is our responsibility to handle reclaim i.e. to avoid hogging memory with the delayed slab frees. At the moment, we wait for a grace period in the shrinker, and block for all RCU callbacks on oom. Suggested alternatives focus on flushing our RCU callback when we have a certain number of outstanding request frees, and blocking on that flush after a second high watermark. (So rather than wait for the system to run out of memory, we stop issuing requests - both are nondeterministic.) Paul E. McKenney wrote: Another approach is synchronize_rcu() after some largish number of requests. The advantage of this approach is that it throttles the production of callbacks at the source. The corresponding disadvantage is that it slows things up. Another approach is to use call_rcu(), but if the previous call_rcu() is still in flight, block waiting for it. Yet another approach is the get_state_synchronize_rcu() / cond_synchronize_rcu() pair. The idea is to do something like this: cond_synchronize_rcu(cookie); cookie = get_state_synchronize_rcu(); You would of course do an initial get_state_synchronize_rcu() to get things going. This would not block unless there was less than one grace period's worth of time between invocations. But this assumes a busy system, where there is almost always a grace period in flight. But you can make that happen as follows: cond_synchronize_rcu(cookie); cookie = get_state_synchronize_rcu(); call_rcu(&my_rcu_head, noop_function); Note that you need additional code to make sure that the old callback has completed before doing a new one. Setting and clearing a flag with appropriate memory ordering control suffices (e.g,. smp_load_acquire() and smp_store_release()). v3: More comments on compiler and processor order of operations within the RCU lookup and discover we can use rcu_access_pointer() here instead. v4: Wrap i915_gem_active_get_rcu() to take the rcu_read_lock itself. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: "Goel, Akash" <akash.goel@intel.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-25-git-send-email-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
We are motivated to avoid using a bitfield for obj->active for a couple of reasons. Firstly, we wish to document our lockless read of obj->active using READ_ONCE inside i915_gem_busy_ioctl() and that requires an integral type (i.e. not a bitfield). Secondly, gcc produces abysmal code when presented with a bitfield and that shows up high on the profiles of request tracking (mainly due to excess memory traffic as it converts the bitfield to a register and back and generates frequent AGI in the process). v2: BIT, break up a long line in compute the other engines, new paint for i915_gem_object_is_active (now i915_gem_object_get_active). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-23-git-send-email-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
In preparation to perform some magic to speed up i915_vma_pin(), which is among the hottest of hot paths in execbuf, refactor all the bitfields accessed by i915_vma_pin() into a single unified set of flags. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-16-git-send-email-chris@chris-wilson.co.uk
-
- 04 8月, 2016 2 次提交
-
-
由 Chris Wilson 提交于
When we call i915_vma_unbind(), we will wait upon outstanding rendering. This will also trigger a retirement phase, which may update the object lists. If, we extend request tracking to the VMA itself (rather than keep it at the encompassing object), then there is a potential that the obj->vma_list be modified for other elements upon i915_vma_unbind(). As a result, if we walk over the object list and call i915_vma_unbind(), we need to be prepared for that list to change. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-8-git-send-email-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Since we may have VMA allocated for an object, but we interrupted their binding, there is a disparity between have elements on the obj->vma_list and being bound. i915_gem_obj_bound_any() does this check, but this is not rigorously observed - add an explicit count to make it easier. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-7-git-send-email-chris@chris-wilson.co.uk
-
- 26 7月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
list_first_entry_or_null() can generate better code than using if (!list_empty()) {ptr = list_first_entry()) ..., so put it to use. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-3-git-send-email-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1469530913-17180-2-git-send-email-chris@chris-wilson.co.uk
-
- 20 7月, 2016 2 次提交
-
-
由 Chris Wilson 提交于
Ultimately wraps kref_put(), so adopt its nomenclature for consistency with other subsystems. s/drm_gem_object_unreference/i915_gem_object_put/ Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-6-git-send-email-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-5-git-send-email-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Ultimately wraps kref_get(), so adopt its nomenclature for consistency with other subsystems. s/drm_gem_object_reference/i915_gem_object_get/ Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-5-git-send-email-chris@chris-wilson.co.ukReviewed-by: NDave Gordon <david.s.gordon@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-4-git-send-email-chris@chris-wilson.co.uk
-
- 14 7月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
In commit 7608a43d ("locking/mutexes: Use MUTEX_SPIN_ON_OWNER when appropriate") the owner field in the mutex was updated from being dependent upon CONFIG_SMP to using optimistic spin. Update our peek function to suite. Fixes:7608a43d ("locking/mutexes: Use MUTEX_SPIN_ON_OWNER...") Reported-by: NHong Liu <hong.liu@intel.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1468244777-4888-1-git-send-email-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com> (cherry picked from commit 4f074a53) Cc: stable@vger.kernel.org Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 12 7月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
In commit 7608a43d ("locking/mutexes: Use MUTEX_SPIN_ON_OWNER when appropriate") the owner field in the mutex was updated from being dependent upon CONFIG_SMP to using optimistic spin. Update our peek function to suite. Fixes:7608a43d ("locking/mutexes: Use MUTEX_SPIN_ON_OWNER...") Reported-by: NHong Liu <hong.liu@intel.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1468244777-4888-1-git-send-email-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>
-